Application of hyper-branched rolling circle amplification (HRCA) and HRCA-based strip test for the detection of Chattonella marina

Establishment of a graphene oxide-assisted nucleic acid chromatography strip detection technology for Prorocentrum minimum

In recent decades, the harmful algal blooms (HABs) caused by Prorocentrum minimum have caused serious environmental damage and economic losses. The detection of P. minimum plays an important role in warning the outbreak of P. minimum-forming HABs. By utilizing the powerful absorption of graphene oxide (GO) on short-stranded DNA, a GO-assisted nucleic acid chromatography strip (GO-NACS) was proposed here to achieve a highly sensitive, specific, intuitive, and convenient detection of P. minimum. In particular, this study used our previously reported conventional-NACS (C-NACS) as a control to evaluate the improvement of detection performance with the use of GO. The performance of GO-NACS was evaluated from the perspectives of specificity, sensitivity, stability, and practicality. The specificity test demonstrated that it had a high degree of specificity and did not display cross-reacting with non-target algal species. The sensitivity test with the genomic DNA indicated that it had a detection limit of 1.30 × 10-3 ng μL-1, representing a 10-fold higher sensitivity than C-NACS and a 100-fold higher sensitivity than agarose gel electrophoresis (AGE). The interference test with non-target algal species demonstrated that it had a good detection stability, and the interfering algal species had no obvious effect on the detection of P. minimum. The practicality test with simulated natural water samples showed that the cellular detection limit of GO-NACS was 6.8 cells mL-1, which was 10-fold and 100-fold lower than that of C-NACS and AGE, respectively. In conclusion, the established GO-NACS may offer a novel alternative technique for the detection of P. minimum while guaranteeing specificity and enhancing sensitivity without requiring extensive apparatus.

Advances in multiplex molecular detection technologies for harmful algae

As the eutrophication of natural water bodies becomes more and more serious, the frequency of outbreaks of harmful algal blooms (HABs) mainly formed by harmful algae also increases. HABs have become a global ecological problem that poses a serious threat to human health and food safety. Therefore, it is extremely important to establish methods that can rapidly detect harmful algal species for early warning of HABs. The traditional morphology-based identification method is inefficient and inaccurate. In recent years, the rapid development of molecular biology techniques has provided new ideas for the detection of harmful algae and has become a research hotspot. The current molecular detection methods for harmful algal species mainly include fluorescence in situ hybridization, sandwich hybridization, and quantitative PCR (qPCR), but all of these methods can only detect single harmful algal species at a time. The establishment of methods for the simultaneous detection of multiple harmful algal species has become a new trend in the development of molecular detection technology because various harmful algal species may coexist in the natural water environment. The established molecular techniques for multiple detections of harmful algae mainly include gene chip, multiplex PCR, multiplex qPCR, massively parallel sequencing, antibody chip, and multiple isothermal amplification. This review mainly focuses on the principles, advantages and disadvantages, application progress, and application prospects of these multiple detection technologies, aiming at providing effective references not only for the fisheries but also for economic activities, environment, and human health.

A review of the current and emerging detection methods of marine harmful microalgae

In recent years, the scale and frequency of outbreaks of harmful algal blooms (HABs) have increased year by year due to the intensification of seawater eutrophication and global climate change. HABs have become a global marine ecological and environmental problem, which poses a serious threat to human health, marine ecological security, and economic development. The establishment of detection technology for harmful microalgae is fundamental to the early warning and prevention of HABs. To date, several detection methods have been developed for harmful microalgae, they however lack a unified classification standard. It is difficult to use a reasonable mix of all the developed methods to improve the accuracy of detection results. Here, all of the established detection methods for harmful microalgae were reviewed, including morphological structure-based detection methods, cytochrome-based detection techniques, immunoassays, and nucleic acid-based detection methods. The principles, advantages, and weaknesses of these methods were highlighted. Their application in the detection of harmful microalgae was summarized. Overall, different detection methods are suitable for different purposes. Further development of more accurate, cost-effective, efficient, and rapid detection technology is required in the future. This review is expected to provide a reference for research related to the monitoring of marine environment, early warning of HABs, and the molecular identification of harmful microalgae.

Rapid detection of Chattonella marina by PCR combined with dot lateral flow strip

In this study a novel technique referred to as PCR combined with dot lateral flow strip (PCDS) is proposed and its application to the detection of harmful microalgae was explored. For this purpose, using Chattonella marina as a test algal species, PCR targeting the D1-D2 region of large subunit ribosomal gene of this alga was performed with the tagged specific primers. The amplicons were then analyzed with the manually prepared dot lateral flow strip, and the strip could produce a test dot and a control dot that are naked-eye detectable, indicating the successful establishment of PCDS. The established PCDS assay does not require expensive instruments for the detection, and the results can be observed visually after adding 7.5 μL of PCR amplicons in combination with 92.5 μL of chromatography buffer to the sample pad of the strip for about 10 min. The PCR conditions were optimized to enhance the effectiveness of detection. The cross-reactivity test with 23 microalgae species, including Chattonella marina, showed good specificity of the PCDS. The detection limit of PCDS was 1.25 × 10^-2 ng µL^-1 for genomic DNA and 10¹ cells mL^-1 for crude cell extracts, which can meet the detection needs. In summary, the PCDS proposed in this study has low cost, clear, and intuitive detection results and good specificity and sensitivity, providing a novel detection method for C. marina.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10811-021-02667-x.

Rolling Circle Amplification as an Efficient Analytical Tool for Rapid Detection of Contaminants in Aqueous Environments

Environmental contaminants are a global concern, and an effective strategy for remediation is to develop a rapid, on-site, and affordable monitoring method. However, this remains challenging, especially with regard to the detection of various contaminants in complex water environments. The application of molecular methods has recently attracted increasing attention; for example, rolling circle amplification (RCA) is an isothermal enzymatic process in which a short nucleic acid primer is amplified to form a long single-stranded nucleic acid using a circular template and special nucleic acid polymerases. Furthermore, this approach can be further engineered into a device for point-of-need monitoring of environmental pollutants. In this paper, we describe the fundamental principles of RCA and the advantages and disadvantages of RCA assays. Then, we discuss the recently developed RCA-based tools for environmental analysis to determine various targets, including heavy metals, organic small molecules, nucleic acids, peptides, proteins, and even microorganisms in aqueous environments. Finally, we summarize the challenges and outline strategies for the advancement of this technique for application in contaminant monitoring.

Rapid and sensitive detection of Karlodinium veneficum by a novel double-nick rolling circle amplification

Harmful algal blooms caused by Karlodinium veneficum recently occurred with high incidence, posing a serious threat to the marine ecological environment, public health, and mariculture. It is therefore rather vital to establish a method for rapid detection of K. veneficum. In this study, the D1-D2 region of the large subunit rDNA (LSU rDNA D1-D2) of K. veneficum was cloned and sequenced to design the specific probes and primers. A novel method referred to as double-nick rolling circle amplification (dn-RCA) based on the designed probes and primers was initially established. The optimal reaction conditions for dn-RCA were as follows: probe concentration, 200 pM; ligation temperature, 57 °C; ligation time, 50 min; amplification temperature, 60 °C; and amplification time, 60 min. Furthermore, lateral flow dipstick (LFD) was employed instead of agarose gel electrophoresis to analyze dn-RCA products, which can simplify the detection procedure and reduce the operation time. The sensitivity of dn-RCA-LFD was tested with the genomic DNA, the recombinant plasmid containing the inserted LSU rDNA D1-D2, and the DNA crude extract of K. veneficum. The results showed that the sensitivity of dn-RCA-LFD was 10 times higher than that of conventional PCR; the detection limit of dn-RCA-LFD was 1.1 × 10^-4 ng μL^-1 for the genomic DNA, 360 copies μL^-1 for the recombinant plasmid, and 5.3 cells mL^-1 for DNA crude extract. The results of the cross-reactivity test with 22 control microalgal species showed that the dn-RCA-LFD had high specificity for K. veneficum. The stability of dn-RCA-LFD was tested by mixing the interfering genomic DNA with the target genomic DNA, which can be expected to simulate the natural samples containing different ratios of interfering cells to target cells. The results indicated that the performance of dn-RCA-LFD was immune to the DNA concentration of the interfering species. Finally, the practicability of dn-RCA-LFD was further confirmed by the test with field samples collected from the East China Sea. In conclusion, the established dn-RCA-LFD has advantages of high sensitivity, strong specificity, and stable performance, and is therefore promising for rapid detection of K. veneficum.

Detecting harmful algal blooms with nucleic acid amplification-based biotechnological tools

Harmful algal blooms (HABs) represent a growing threat to aquatic ecosystems and humans. Effective HAB management and mitigation efforts strongly rely on the availability of timely and in-situ tools for the detection of microalgae. In this sense, nucleic acid-based (molecular) methods are being considered for the unequivocal identification of microalgae as an attractive alternative to the currently used time-consuming and laboratory-based light microscopy techniques. This review provides an overview of the progress made on new molecular biotechnological tools for microalgal detection, particularly focusing on those that combine a nucleic acid (DNA or RNA) amplification step with detection. Different types of amplification processes (thermal and isothermal) and detection formats (e.g. microarrays, biosensors, lateral flows) are presented, and a comprehensive overview of their advantages and limitations is provided Although isothermal techniques are an attractive alternative to thermal amplification to reach in-situ analysis, further development is still required. Finally, current challenges, critical steps and future directions of the whole analysis process (from sample procurement to in-situ implementation) are described.

Detection of Prorocentrum minimum by hyperbranched rolling circle amplification coupled with lateral flow dipstick

A novel method referred to as hyperbranched rolling circle amplification (HRCA) coupled with lateral flow dipstick (LFD) (HRCA-LFD) here was developed for specific, sensitive, rapid, and simple detection of Prorocentrum minimum. HRCA-LFD relies on a padlock probe (PLP) consisting of a common ligation sequence, two terminal sequences that complement the target DNA, and a manually designed detection probe (LFD probe). The two terminal sequences of the PLP were designed against the species-specific sites of the large subunit ribosomal DNA (LSU rDNA) D1-D2 region of P. minimum. The optimum parameters for HRCA were as follows: PLP concentration of 20 pM, ligation time of 30 min, ligation temperature of 59 °C, enzymic digestion time of 105 min, amplification time of 45 min, and amplification temperature of 58 °C. The HRCA-LFD displaying high specificity could accurately distinguish P. minimum from other microalgae. The detection limit of HRCA-LFD was as low as 1.42 × 10^-7 ng μL^-1 for genomic DNA, 1.03 × 10^-7 ng μL^-1 (approximately 27 copies) for recombinant plasmid containing the inserted LSU rDNA D1-D2, and 0.17 cells for crude DNA extract of P. minimum, which was consistently 100 times more sensitive than regular PCR. Interfering test suggested that the performance of HRCA-LFD is stable and would not be affected by other non-target species. The HRCA-LFD results of field samples that are comparable with microscopic examination confirmed that the developed method is competent for detection of target cells in field samples. In conclusion, the developed HRCA-LFD exhibiting stable performance is specific, sensitive, and rapid, which provides a good alternative to traditional microscopic examination for the detection of P. minimum cells in field samples.

Establishment of double probes rolling circle amplification combined with lateral flow dipstick for rapid detection of Chattonella marina

Chattonella marina is one of the main algae that could cause harmful algal blooms. It has killed a large number of cultured fish in coastal areas of many countries, causing serious economic losses. Therefore, it is necessary to establish a method that can specifically detect C. marina at pre-bloom abundance, so that timely measures can be taken before this alga causes harm. In this study, a long probe, a short probe and a pair of amplification primers were first designed by using the internal transcribed spacer (ITS) sequence of C. marina as the target gene and using the CD74 gene of a distant species Gallus gallus as the base sequence. The double probes rolling circle amplification (dpRCA) system was then established with the designed probes and amplification primers. A novel detection protocol referred to as dpRCA-LFD by combining the dpRCA products and lateral flow dipstick (LFD) was finally established, which can make the detection results visible to the naked eyes. The reaction conditions of dpRCA were optimized and the optimal conditions were as follows: cycle number of ligation reaction, 12; ligation temperature, 58 °C; amplification temperature, 60 °C; and amplification time, 60 min. The specificity test that was performed using the optimized dpRCA conditions indicated that dpRCA-LFD was exclusively specific for the target alga. The tests with the genomic DNA of C. marina and the recombinant plasmid containing the ITS sequence of C. marina showed that the sensitivity of dpRCA-LFD was 100 times higher than that of conventional PCR. The detection limit (DL) for the genomic DNA was 8.3 × 10^-3 ng µL^-1 (8.3 × 10^-3 ng per reaction), and the DL for the recombinant plasmid DNA was 7.8 copies µL^-1 (7.8 copies per reaction). The practicality of the developed dpRCA-LFD was further validated by test with the spiked samples containing C. marina and field samples. The simulative test showed that the dpRCA-LFD has a DL of 10 cells mL^-1. The dpRCA-LFD could successfully recognize the target cells from the field samples. In summary, the dpRCA-LFD established in this study has advantages of good specificity, high sensitivity, and easily visible detection results, and therefore is promising for the analysis of C. marina in field samples.

Development of loop-mediated isothermal amplification combined with a chromatographic lateral-flow dipstick for rapid detection of Chattonella marina

Harmful algal blooms caused by Chattonella marina recently have caused severe negative effect on coastal economy worldwide, with increased occurrence frequency and scale. It is therefore vital to establish new methods for rapid detection of this alga. In this study, the internal transcribed spacer (ITS) sequence was used as the target gene for molecular detection of C. marina. First, four loop-mediated isothermal amplification (LAMP) primers were designed based on the six regions of ITS, and the LAMP reaction system was established using these primers. Next, a probe was designed to detect the LAMP products by lateral-flow dipstick (LFD). Finally, a new method for rapid and sensitive detection of C. marina that is referred to as LAMP-LFD was established. The LAMP reaction system, amplification time, and amplification temperature were particularly optimized. The optimal parameters are as follows: Mg²⁺ concentration, 10 mM；dNTP concentration, 1.2 mM；ratio of internal primer concentration to outer primer concentration, 8:1；reaction time, 60 min；and reaction temperature, 60 °C. Both specificity and sensitivity were tested using the optimized LAMP reaction system in combination with LFD (LAMP-LFD). The established LAMP-LFD displayed good specificity and no cross reaction was detected with non-target algal species. The detection limit of LAMP-LFD was 3.4 × 10^-4 ng μL^-1 (3.4 × 10^-4 ng per reaction) for the genomic DNA of target algae, and 1.3 copies μL^-1 (1.3 copies per reaction) for the plasmid DNA containing the target ITS. Sensitivity tests using genomic DNA and plasmid DNA as templates consistently revealed that LAMP-LFD is 100 times more sensitive than regular PCR. The established LAMP-LFD was applied to analyze the simulated samples and the results showed that the detection limit of LAMP-LFD could reach 1 cell mL^-1. LAMP-LFD also demonstrated good specificity and sensitivity in the analysis of natural samples. The whole procedure of LAMP-LFD could be completed within 1.5 h. Taken together, the LAMP-LFD assay developed here is characterized by simplicity, high specificity and sensitivity, and rapidity and therefore is promising for rapid detection of C. marina.