Removal of Cr(VI) from aqueous solution using electrosynthesized 4-amino-3-hydroxynaphthalene-1-sulfonic acid doped polypyrrole as adsorbent

Polypyrrole-based adsorbents for Cr(VI) ions remediation from aqueous solution: a review

Anthropogenic activities are principally responsible for the manifestation of toxic and carcinogenic hexavalent chromium (Cr(VI)) triggering water pollution that threatens the environment and human health. The World Health Organisation (WHO) restricts Cr(VI) ion concentration to 0.1 and 0.05 mg/L in inland surface water and drinking water, respectively. The available technologies for Cr(VI) ion removal from water were highlighted with an emphasis on the adsorption technology. Furthermore, the characteristics of several polypyrrole-based adsorbents were scrutinized including amino-containing compounds, biosorbents, graphene/graphene oxide, clay materials and many other additives with reported effective Cr(VI) ion uptake. This efficiency in Cr(VI) ions adsorption is attributed to enhanced redox properties, increased number of functional groups as well as the synergistic behaviour of the materials making up the composites. The Langmuir isotherm best described the adsorption processes with maximum adsorption capacities ranging from 3.40-961.50 mg/g. The regeneration of Cr(VI) ion-laden adsorbents was studied. Ion exchange, electrostatic attractions, complexation, chelation reactions with protonated sites and reduction were the mechanisms of adsorption. Nevertheless, there are limited details on comprehensive adsorbent regeneration studies to prolong robustness in adsorption-desorption cycles and utilization of the Cr(VI) ion-laden adsorbent in other areas of research to limit the threat of secondary pollution.

Toxic heavy metals: impact on the environment and human health, and treatment with conducting organic polymers, a review

Water pollution by heavy metals has many human origins, such as the burning of fossil fuels, exhaust gases of vehicles, mining, agriculture, and incineration of solid and liquid wastes. Heavy metals also occur naturally, due to volcanoes, thermal springs activity, erosion, infiltration, etc. This water contamination is a threat for living beings because most heavy metals are toxic to humans and to aquatic life. Hence, it is important to find effective techniques for removing these contaminants in order to reduce the level of pollution of the natural waters. In this work, we have reviewed the toxicity of several heavy metals (mercury, lead, cadmium, chromium, nickel), their impact on the environment and human health, and the synthesis and characterization methods of conducting organic polymers (COPs) utilized for the removal of heavy metals from the environment. Therefore, this review was essentially aimed to present recent works and methods (2000-2020) on the environmental impact and toxicity of heavy metals and on the removal of toxic heavy metals, using chemically and/or electrochemically synthesized COPs. We have also stressed the great interest of COPs for the removal of toxic heavy metals from waters.

Performance of synthesized cast and electrospun PVA/chitosan/ZnO-NH2 nano-adsorbents in single and simultaneous adsorption of cadmium and nickel ions from wastewater

The performance of synthesized cast and electrospun polyvinyl alcohol/chitosan/zinc oxide/aminopropyltriethoxylsilane (PVA/chitosan/ZnO-APTES) nano-adsorbents were compared in removal of Cd(II) and Ni(II) ions from wastewater. The adsorbents were characterized by SEM, BET, FTIR and TGA analyses. Furthermore, the swelling investigations were carried out to study the adsorbent stability in aqueous solution. The effect of several parameters such as contents of ZnO-NH₂, contact time, initial Cd(II) and Ni(II) concentration and temperature on the adsorption capacity was investigated in a batch mode. In comparison with cast adsorbent, nanofiber adsorbent indicated the better adsorption performance. The experimental data well fitted the double-exponential kinetic model. In single metal ion system, the maximum adsorption capacity of nanofiber for Cd(II) and Ni(II) ions is estimated to be 1.239 and 0.851 mmol/g, respectively, much higher than q_m of cast adsorbent for Cd(II) (0.625 mmol/g) and Ni(II) (0.474 mmol/g) ions. Thermodynamic parameters were investigated to identify the nature of adsorption process. In binary system of Cd(II)-Ni(II) ions, the inhibitory effect of competitive Cd(II) ion on the Ni(II) adsorption was greater than the inhibitory effect of competitive on the Cd(II) adsorption. The selectivity adsorption of both nanofiber and cast adsorbents was in order of Cd(II) > Ni(II).

Removal of lead and cadmium from aqueous solutions by using 4-amino-3-hydroxynaphthalene sulfonic acid-doped polypyrrole films

Water pollution by heavy metals is a great health concern worldwide. Lead and cadmium are among the most toxic heavy metals because they are dangerous for the human and aquatic lives. In this work, the removal of lead and cadmium from aqueous solutions has been studied using electrosynthesized 4-amino-3-hydroxynaphthalene-1-sulfonic acid-doped polypyrrole (AHNSA-PPy) films as a new adsorbent. Two distinct methods, including the immersion method, based on the Pb²⁺ and Cd²⁺ spontaneous removal by impregnation of the polymer in the solution, and the electro-elimination method, consisting of removal of Pb²⁺ and Cd²⁺ ions from the solution by applying a small electrical current (5 mA) to the polymer film, were developed: the evolution of Pb²⁺ and Cd²⁺ concentrations with time was monitored by inductively coupled plasma optical emission spectrometry (ICP-OES). The effect of pH on the adsorption and electro-elimination of Pb²⁺ and Cd²⁺ using the AHNSA-PPy film was investigated and optimized, showing that the ionic adsorption and electro-elimination processes were highly pH-dependent. The kinetics of Pb²⁺ and Cd²⁺ adsorption and electro-elimination were found to follow second-order curves. The maximum adsorption capacity values of the AHNSA-PPy film were 64.0 and 50.4 mg/g, respectively, for Pb²⁺ and Cd²⁺. The removal efficiency values were, respectively, for Pb²⁺ and Cd²⁺, 80 and 63% by the immersion method, and 93 and 85% by the electro-elimination method. Application of both methods to Senegal natural waters, fortified with Pb²⁺ and Cd²⁺, led to removal efficiency values of, respectively for Pb²⁺ and Cd²⁺, 76-77 and 58-59% by the immersion method, and of 82-90 and 80-83%, by the electro-elimination method.