Purification of water contaminated with Hg using horizontal subsurface constructed wetlands

SERS detection of Hg2+ and aflatoxin B1 through on-off strategy of oxidase-like Au@HgNPs/carbon dots

In this work, cerium-doped carbon dots (Ce-CDs) both as a reducing agent and template hybrid gold nanoparticles (AuNPs) with weak oxidase-like (OXD) activity was synthesized for the detection of Hg²⁺ and aflatoxin B₁ (AFB₁). The AuNPs can catalyze efficiently mercury ion (Hg²⁺) reduction to the metallic (Hg⁰) to form Au-Hg amalgam (Au@HgNPs). The obtained Au@HgNPs with strong OXD-like activity oxidize without Raman-active leucomalachite green (LMG) into the Raman-active malachite green (MG) and simultaneously as the SERS substrates by the formed Raman "hot spot" through MG-induced Au@HgNPs aggregation. While AFB₁ was introduced resulting in the SERS intensity decreasing due to Hg²⁺ with AFB₁ via carbonyl group to inhibit the aggregation of Au@HgNPs. The work paves a new path for the design of a nanozyme-based SERS protocol for tracing Hg²⁺ and AFB₁ residues in foodstuff analysis.

Colorimetric and ratiometric fluorescent dual-mode sensitive detection of Hg2+ based on UiO-66-NH2@Au composite

A colorimetric and ratiometric fluorescent dual-mode assay is constructed for sensitive and specific Hg²⁺ sensing based on UiO-66-NH₂ and Au composite (UiO-66-NH₂@Au). The addition of Hg²⁺ stimulates the peroxidase-like activity of UiO-66-NH₂@Au by the formation of Au-Hg amalgam, promoting the oxidizing of chromogenic substrate OPD to DAP with the aid of H₂O₂, which lead to the change of colorimetric and fluorescent signals. The absorbance of the sensing system at 450 nm is linear positive correlation with Hg²⁺ concentration of 30-1400 nM and the color of the solution under visible light shaded from light yellow to dark yellow. With the increase of Hg²⁺ concentration, the fluorescence signal at 570 nm (DAP) increased whereas that at 455 nm (intrinsic fluorescence of UiO-66-NH₂) decreased due to inner filter effect (IFE), the fluorescence intensity ratio (F₄₅₅/F₅₇₀) decreasing linearly with Log [Hg²⁺] over the range 60-1700 nM; the fluorescence emission of sensing system under UV excitation changed from blue to yellow, which can easily be discerned visually. This assay was successfully applied to the determination of Hg²⁺ in tap water and river water. The results indicate that the colorimetric and ratiometric fluorescent dual-mode assay based on UiO-66-NH₂@Au realized visual determination of Hg²⁺ rapidly and reliably, revealed application prospect in Hg²⁺ monitoring.

Examining Primary Care Physicians' Intention to Perform Cervical Cancer Screening Services Using a Theory of Planned Behavior: A Structural Equation Modeling Approach

Background

Promoting cervical cancer screening (CCS) is undoubtedly effective in combating severe public health problems in developing countries, but there are challenges to its implementation. Understanding the factors influencing primary care physicians' intentions to provide CCSs to rural women is crucial for the future implementation of screening programs. The aim of this study was to assess the intentions of primary care physicians to provide cervical cancer screening services (CCSSs) to rural women and their determinants.

Methods

This cross-sectional study included 1,308 primary care physicians in rural primary health care, and the data collection tool was developed based on the theory of planned behavior (TPB), which included demographic characteristics, the basic constructs of TPB, and the degree of knowledge of CCSSs as an extended variable of the TPB model. Structural equation modeling was used to analyze the relationships between each factor.

Results

Pathway analysis found that TPB is an appropriate theoretical basis for predicting primary care physicians' intent to provide CCSSs (χ2/df = 2.234 < 3, RMSEA = 0.035, and SRMR = 0.034). Meanwhile, the structural equation model showed that attitude (β = 0.251, p < 0.001), subjective norm (β = 0.311, p < 0.001), perceived behavioral control (β = 0.162, p < 0.001), and knowledge level (β = 0.152, p < 0.01) positively predicted primary care physicians' intention to provide CCSSs.

Conclusions

TPB model, with the addition of knowledge, was useful in predicting primary care physicians' intention to provide CCSSs for rural Chinese women. The findings of this study provide a reference for the government and hospitals to develop strategies to improve the intent of primary care physicians to provide CCSSs.

Enhanced removal of heavy metals and metalloids by constructed wetlands: A review of approaches and mechanisms

Constructed wetlands (CWs) are increasingly employed to remediate heavy metal and metalloid (HMM)-polluted water. However, the disadvantages of HMM removal by conventional CWs (without enhancement), such as an unstable and unpredictable removal efficiency, hinder the reliability of this technology. The objective of this study was to review research on enhanced CWs for HMM removal. In particular, we performed a bibliometric analysis to evaluate research trends, critical literature, and keyword evolution in recent years. Subsequently, we reviewed various enhanced approaches for the application of CWs for the removal of HMMs, including the use of improved substrates, aquatic macrophytes, microorganisms, bioelectrochemical coupling systems, hybrid CW, external additives, and operation parameters. Furthermore, the main mechanisms underlying HMM removal by these approaches are summarized. Our review clearly reveals that research on the remediation of HMM-polluted water via CW technology is receiving increased attention, with no apparent trends in topics. The selection of appropriate enhanced approaches or operation parameters as well as methodological improvements should be based on the dominant environmental conditions of the CW column and removal mechanisms for the targeted HMMs. Based on the established literature, several suggestions are proposed to guide the optimization of the design and operation of efficient CWs for the treatment of HMM-polluted water.

Efficient treatment of mercury(Ⅱ)-containing wastewater in aerated constructed wetland microcosms packed with biochar

Effective removal of mercury (Hg) pollutants from contaminated water/wastewater to prevent severe environmental pollution is of great significance due to the extremely high toxicity of Hg. In this study, granular biochar and gravel (control) were packed into intermittently aerated constructed wetland (CW) microcosms to treat Hg(Ⅱ)-containing wastewater over 100 d. The results showed that the biochar-filled CWs exhibited notably better Hg(Ⅱ) removal than the gravel systems by facilitating chemical and microbial Hg(Ⅱ) reduction and volatilization and promoting plant growth and Hg assimilation. More than ten times more Hg was absorbed by the plants (L. salicaria) in biochar CWs than in the gravel systems, with the roots acting as the major sink. In contrast, substrate binding in a predominantly oxidizable fraction was the dominant pathway for Hg removal in the gravel CWs. Biochar substrates also exhibited higher levels of COD, N and P removal, and Hg(Ⅱ) import impacted the removal of these pollutants only slightly. Filling material played a more crucial role than Hg input in shaping the microbial communities in the CWs. The proportions of some dominant genera, including Arenimonas, Lysobacter, Micropruina and Hydrogenophaga, increased in the presence of Hg, implying their tolerance to Hg toxicity and potential roles in Hg detoxification in the CWs. Granular biochar-based CW has high potential for treating Hg(Ⅱ)-contaminated wastewater.

Mechanistic understanding of the pollutant removal and transformation processes in the constructed wetland system

Constructed wetland systems (CWs) are biologically and physically engineered systems to mimic the natural wetlands which can potentially treat the wastewater from the various point and nonpoint sources of pollution. The present study aims to review the various mechanisms involved in the different types of CWs for wastewater treatment and to elucidate their role in the effective functioning of the CWs. Several physical, chemical, and biological processes substantially influence the pollutant removal efficiency of CWs. Plants species Phragmites australis, Typha latifolia, and Typha angustifolia are most widely used in CWs. The rate of nitrogen (N) removal is significantly affected by emergent vegetation cover and type of CWs. Hybrid CWs (HCWS) removal efficiency for nutrients, metals, pesticides, and other pollutants is higher than a single constructed wetland. The contaminant removal efficiency of the vertical subsurface flow constructed wetlands (VSSFCW) commonly used for the treatment of domestic and municipal wastewater ranges between 31% and 99%. Biochar/zeolite addition as substrate material further enhances the wastewater treatment of CWs. Innovative components (substrate materials, plant species) and factors (design parameters, climatic conditions) sustaining the long-term sink of the pollutants, such as nutrients and heavy metals in the CWs should be further investigated in the future. PRACTITIONER POINTS: Constructed wetland systems (CWs) are efficient natural treatment system for on-site contaminants removal from wastewater. Denitrification, nitrification, microbial and plant uptake, sedimentation and adsorption are crucial pollutant removal mechanisms. Phragmites australis, Typha latifolia, and Typha angustifolia are widely used emergent plants in constructed wetlands. Hydraulic retention time (HRT), water flow regimes, substrate, plant, and microbial biomass substantially affect CWs treatment performance.

Enhanced dissipation of trace level organic contaminants by floating treatment wetlands established with two macrophyte species: A mesocosm study

This study evaluated removal efficiencies of six contaminants of emerging concern (CECs) in floating treatment wetland (FTW) mesocosms established with either Japanese Sweetflag (Acorus gramineus Sol. ex Aiton) or canna lilies (Canna Hybrida L. 'Orange King Humbert'). The CECs included: acetaminophen (APAP), atrazine (ATZ), carbamazepine (CBZ), perfluorooctanoic acid (PFOA), sulfamethoxazole (SMX), and 17β-estradiol (E2). Each treatment was planted with different numbers of plants (i.e., 0, 10, 15, and 20), and the experiments lasted for 17 weeks. Dissipation of CECs was greater in planted treatments than in non-planted controls, and the planting number had little effect on dissipation of CECs. All residues of APAP and E2 dissipated rapidly within 2 weeks in all planted treatments. At the end of the experiment, residues of ATZ and SMX completely dissipated in the canna treatments, but not in the sweetflag treatments (75.8-87.6% and 96.3-97.1%, respectively). During the 17 week study, moderate dissipation of CBZ was observed in treatments including cannas (79.5-82.6%) and sweetflag (69.4-82.3%), while less dissipation was observed for PFOA (9.0-15.0% with sweetflag and 58.4-62.3% with cannas). Principal component analysis indicates that aqueous persistency of CECs and species of plants used influenced the dissipation of CECs in FTWs. Of the two species evaluated, canna was the most promising plant species for FTW systems designed to remove these CECs from surface water.