Efficient microalgae removal from aqueous medium through auto-flocculation: investigating growth-dependent role of organic matter

Synergies of pH-induced calcium phosphate precipitation and magnetic separation for energy-efficient harvesting of freshwater microalgae

Energy- and time-consuming concentration steps currently limit the industrial application of microalgae. Compared to state-of-the-art technologies, magnetic separation shows a high potential for efficient harvesting of microalgae. This study presents a novel approach to combine pH-induced calcium phosphate precipitation with cheap natural magnetite microparticles for magnetic separation of the freshwater microalgae Chlorella vulgaris. Harvesting efficiencies up to 98% were achieved at moderate pH and low particle and calcium phosphate concentrations in a model medium. However, cultivation-dependent high loads of algogenic organic matter can severely inhibit flocculation and particle/algae interactions, requiring higher salt concentrations or pH. Harvesting efficiencies above 90% were still attainable at moderate pH with increased calcium phosphate concentrations of 10mM. Acidification of the suspension to pH 5 allows for simple and reversible particle recycling. The presented process provides a promising path to universal and cost-effective harvesting, advancing the utilization of microalgae as a sustainable bioresource.

Microalgae-derived hydrogen production towards low carbon emissions via large-scale outdoor systems

Hydrogen as a clean fuel is receiving attention because it generates only water and a small amount of nitrogen oxide upon combustion. Biohydrogen production using microalgae is considered to be a highly promising carbon-neutral technology because it can secure renewable energy while efficiently reducing CO2 emissions. However, previous studies have mainly focused on improving the biological performance of microalgae; these approaches have struggled to achieve breakthroughs in commercialization because they do not heavily consider the complexity of the entire production process with microalgae, including large-scale cultivation, biomass harvest, and biomass storage. This work presents an in-depth analysis of the state-of-the-art technologies focused on large-scale cultivation systems with efficient downstream processes. Considering the individual processes of biohydrogen production, strategies are discussed to minimize carbon emissions and improve productivity simultaneously. A comprehensive understanding of microalgae-derived biohydrogen production suggests future directions for realizing environmental and economic sustainability.

Microalgae harvesting techniques: updates and recent technological interventions

Microalgal biomass has garnered attention as a renewable and sustainable resource for producing biodiesel. The harvesting of microalgal biomass is a significant bottleneck being faced by the industries as it is the crucial cost driver in the downstream processing of biomass. Bioharvesting of microalgal biomass mediated by: microbial, animal, and plant-based polymeric flocculants has gained a higher probability of utility in accumulation due to: its higher dewatering potential, less toxicity, and ecofriendly properties. The present review summarizes the key challenges and the technological advancements associated with various such harvesting techniques. The economic and technical aspects of different microalgal harvesting techniques, particularly the cationic polymeric flocculant-based harvesting of microalgal biomass, are also discussed. Furthermore, interactions of flocculants with microalgal biomass and the effects of these interactions on metabolite and lipid extractions are discussed to offer a promising solution for suitability in selecting the most efficient and economical method of microalgal biomass harvesting for cost-effective biodiesel production.

Harnessing Solar Energy using Phototrophic Microorganisms: A Sustainable Pathway to Bioenergy, Biomaterials, and Environmental Solutions

Phototrophic microorganisms (microbial phototrophs) use light as an energy source to carry out various metabolic processes producing biomaterials and bioenergy and supporting their own growth. Among them, microalgae and cyanobacteria have been utilized extensively for bioenergy, biomaterials, and environmental applications. Their superior photosynthetic efficiency, lipid content, and shorter cultivation time compared to terrestrial biomass make them more suitable for efficient production of bioenergy and biomaterials. Other phototrophic microorganisms, especially anoxygenic phototrophs, demonstrated the ability to survive and flourish while producing renewable energy and high-value products under harsh environmental conditions. This review presents a comprehensive overview of microbial phototrophs on their (i) production of bioenergy and biomaterials, (ii) emerging and innovative applications for environmental conservation, mitigation, and remediation, and (iii) physical, genetic, and metabolic pathways to improve light harvesting and biomass/biofuel/biomaterial production. Both physical (e.g., incremental irradiation) and genetic approaches (e.g., truncated antenna) are implemented to increase the light-harvesting efficiency. Increases in biomass yield and metabolic products are possible through the manipulation of metabolic pathways and selection of a proper strain under optimal cultivation conditions and downstream processing, including harvesting, extraction, and purification. Finally, the current barriers in harnessing solar energy using phototrophic microorganisms are presented, and future research perspectives are discussed, such as integrating phototrophic microorganisms with emerging technologies.

Identification, characterization, and lipid profiling of microalgae Scenedesmus sp. NC1, isolated from coal mine effluent with potential for biofuel production

An autoflocculating microalgal strain was isolated from coal mine effluent wastewater which was named as Scenedesmus sp. NC1 after morphological and molecularly characterization. Further analysis of internal transcribed spacer 2 (ITS2) and compensatory base changes (CBCs) showed it does not belong to the clade comprising Scenedesmus sensu stricto. In stationary phase of growth, Scenedesmus sp. NC1 exhibited excellent autoflocculation efficiency (> 88 %) within 150 min of setting. Temperature, pH, and inorganic metals exhibited minor influence on the autoflocculation activity of Scenedesmus sp. NC1. The fatty acid profiling of Scenedesmus sp.NC1 showed that palmitic acid (C16:0), oleic acid (C18:1), and stearic acid (18:0) accounted for more than 68 % of total fatty acids. Moreover, Scenedesmus sp. NC1 demonstrated significant bioflocculation potential over non-flocculating freshwater microalgae, Chlorella sp. NCQ and Micractinium sp. NCS2. Hence, Scenedesmus sp. NC1 could be effective for economical harvesting of other non-flocculating microalgae for productions of biodiesel and other metabolites.

Biomitigation of CO2 from flue gas by Scenedesmus obtusiusculus AT-UAM using a hybrid photobioreactor coupled to a biomass recovery stage by electro-coagulation-flotation

The microalga Scenedesmus obtusiusculus AT-UAM efficiently captured CO₂ from two flue gas streams in a hybrid photobioreactor located in a greenhouse. Uptake rates of CO₂, NO, and SO₂ from a formulated gas stream were 160.7 mg L^-1 day^-1, 0.73 mg L^-1 day^-1, and 1.56 mg L^-1 day^-1, respectively, with removal efficiencies of 100% for all gases. Exhaust gases of a motor generator were also removed with uptake rates of 111.4 mg L^-1 day^-1, 0.42 mg L^-1 day^-1, and 0.98 mg L^-1 day^-1, obtaining removal efficiencies of 77%, 71%, and 53% for CO₂, NO_x, and SO₂, respectively. On average, 61% of the CO₂ from both flue gas streams was assimilated as microalgal biomass. The maximum CO₂ uptake rate of 182 mg L^-1 day^-1 was achieved for formulated flue gas flow rate above 100 mL min^-1. The biomass recovery of 88% was achieved using a 20-L electro-coagulation-flotation chamber coupled to a settler with a low specific power consumption of 0.27 kWh kg^-1. The photobioreactor was operated for almost 7 months without contamination of invasive species or a decrease in the activity. It is a very encouraging result for long-term operation in flue gas treatment.

Harvesting of freshwater microalgae Scenedesmus sp. by electro-coagulation-flocculation for biofuel production: effects on spent medium recycling and lipid extraction

There is growing interest in recent times for microalgae as a sustainable energy source. However, efficient harvesting of microalgal biomass for various industrial applications is still considered a bottleneck. The present study attempts to evaluate microalgae Scenedesmus sp. harvesting using electro-coagulation-flocculation (ECF). Plackett-Burman design was exploited to explore the significant process parameters, whereas Taguchi's array design was employed for optimization. The optimal conditions were optimized as initial pH 5.0, electrolysis time 15 min, electrode distance 2 cm, sedimentation time 60 min, and current density 12 mA cm^-2 for complete harvesting. Under optimum conditions, the energy utilization and the operation cost of ECF process was estimated to be 2.65 kWh kg^-1 and USD 0.29 kg^-1, respectively. Thus, ECF-based microalgae harvesting was found as a low-cost technique. In addition, neutralizing pH and supplementing macro- and micronutrients enabled the flocculated medium to maintain an approximate growth yield in algal cultivation to that of the fresh BG11 medium. ECF did not affect the amount of microalgal lipids (28.6 ± 1.2, % wt.), chlorophyll a (8.3 ± 0.3 μg mL^-1), and fatty acid methyl ester composition (C15:0, C16:0, C17:0, and C18:0) as well. These results strongly recommend ECF as the most appropriate and promising method for harvesting Scenedesmus sp. for biofuel production.