Acetylsalicylic acid biosorption onto fungal-bacterial biofilm supported on activated carbons: an investigation via batch and fixed-bed experiments

Removal of aspirin from aqueous solution using electroactive bacteria induced by alternating current

This study aims to improve bacterial laccase enzyme activity (LEA) and dehydrogenase activity (DHA) affecting acetylsalicylic acid (ASA) biodegradation using an alternating current (AC). A microbial consortium was inoculated in an electroactive bioreactor supplied with an AC by a function generator under operating conditions of amplitude (AMPL) = 2-10 peak-to-peak voltage (Vpp), optical fiber splice tray (OFST) = 0.1 V, and sine wave frequency = 10 Hz. The obtained results revealed that at an applied voltage of 8 Vpp and an OFST of 0.1 for 12 h, the maximum bacterial LEA and DHA were 30.6 U/mL and 75.5 micro grTF/cm2.gr biomass; respectively. Cell viability and permeability were equal to 95.7% and 0.3%; respectively, at the voltage of 8 Vpp. Moreover, liquid chromatography-mass spectrometry (LC-MS) and gas chromatography-mass spectrometry (GC-MS) analyses showed that by-products had lower intensity at 8 Vpp compared with that of 2 Vpp voltage. Finally, the results demonstrated an optimum applied voltage of the AC, which could stimulate and promote bacterial LEA and DHA. Therefore, an electroactive bioreactor supplied with an AC can be a novel system for stimulation of enzyme activities in the process of ASA biodegradation.

Biosorption: A Review of the Latest Advances

Biosorption is a variant of sorption techniques in which the sorbent is a material of biological origin. This technique is considered to be low cost and environmentally friendly, and it can be used to remove pollutants from aqueous solutions. The objective of this review is to report on the most significant recent works and most recent advances that have occurred in the last couple of years (2019–2020) in the field of biosorption. Biosorption of metals and organic compounds (dyes, antibiotics and other emerging contaminants) is considered in this review. In addition, the use and possibilities of different forms of biomass (live or dead, modified or immobilized) are also considered.

Removal of pharmaceutical compounds from aqueous solution by novel activated carbon synthesized from lovegrass (Poaceae)

In this work, lovegrass (Cpa), an abundant grass of the Poaceae family, was employed as feedstock for the production of activated carbon in a conventional furnace using ZnCl₂ as a chemical activator. The prepared material (Cpa-AC) was characterized by pH of the point of zero charges (pH_pzc), Boehm's titration method, CHN/O elemental analysis, ATR-FTIR, N₂ adsorption/desorption curves, and SEM. This carbon material was used for adsorption of acetylsalicylic acid (ASA) and sodium diclofenac (DFC). FTIR analysis identified the presence of O-H, N-H, O-C=O), C-O, and aromatic ring bulk and surface of (Cpa-AC) adsorbent. The quantification of the surface functional groups showed the presence of a large amount of acidic functional groups on the surface of the carbon material. The isotherms of adsorption and desorption of N₂ confirm that the Cpa-AC adsorbent is mesopore material with a large surface area of 1040 m² g^-1. SEM results showed that the surface of Cpa-AC is rugous. The kinetic study indicates that the system followed the pseudo-second-order model (pH 4.0). The equilibrium time was achieved at 45 (ASA) and 60 min (DCF). The Liu isotherm model best fitted the experimental data. The maxima sorption capacities (Q_max) for ASA and DFC at 25 °C were 221.7 mg g^-1 and 312.4 mg g^-1, respectively. The primary mechanism of ASA and DFC adsorption was justified considering electrostatic interactions and π-π interactions between the Cpa-AC and the adsorbate from the solution.