A facile pyrolysis synthesis of biochar/ZnO passivator: immobilization behavior and mechanisms for Cu (II) in soil

Heavy metals immobilization and bioavailability in multi-metal contaminated soil under ryegrass cultivation as affected by ZnO and MnO2 nanoparticle-modified biochar

Pollution by heavy metals (HMs) has become a global problem for agriculture and the environment. In this study, the effects of pristine biochar and biochar modified with manganese dioxide (BC@MnO2) and zinc oxide (BC@ZnO) nanoparticles on the immobilization and bioavailability of Pb, Cd, Zn, and Ni in soil under ryegrass (Lolium perenne L.) cultivation were investigated. The results of SEM-EDX, FTIR, and XRD showed that ZnO and MnO2 nanoparticles were successfully loaded onto biochar. The results showed that BC, BC@MnO2 and BC@ZnO treatments significantly increased shoots and roots dry weight of ryegrass compared to the control. The maximum dry weight of root and shoot (1.365 g pot-1 and 4.163 g pot-1, respectively) was reached at 1% BC@MnO2. The HMs uptake by ryegrass roots and shoots decreased significantly after addition of amendments. The lowest Pb, Cd, Zn and Ni uptake in the plant shoot (13.176, 24.92, 32.407, and 53.88 µg pot-1, respectively) was obtained in the 1% BC@MnO2 treatment. Modified biochar was more successful in reducing HMs uptake by ryegrass and improving plant growth than pristine biochar and can therefore be used as an efficient and cost effective amendment for the remediation of HMs contaminated soils. The lowest HMs translocation (TF) and bioconcentration factors were related to the 1% BC@MnO2 treatment. Therefore, BC@MnO2 was the most successful treatment for HMs immobilization in soil. Also, a comparison of the TF values of plant showed that ryegrass had a good ability to accumulate all studied HMs in its roots, and it is a suitable plant for HMs phytostabilization.

Remediation of arsenic contaminated water and soil using mechanically (ball milling) activated and pyrite-amended electrolytic manganese slag

With the development of industry, heavy metal (HM) pollution of soil has become an increasingly serious problem. Using passivators made of industrial by-products to immobilize HMs in contaminated soil is a promising in-situ remediation technology. In this study, the electrolytic manganese slag (EMS) was modified into a passivator (named M-EMS) by ball milling, and the effects of M-EMS on adsorption of As(V) in aquatic samples and on immobilization of As(V) and other HMs in soil samples were investigated under different conditions. Results demonstrated that M-EMS had a maximum As(V) adsorption capacity of 65.3 mg/g in the aquatic samples. Adding M-EMS to the soil reduced the leaching of As (from 657.2 to 319.8 μg/L) and other HMs after 30 d of incubation, reduced the bioavailability of As(V) and improved the quality and microbial activity of the soil. The mechanism for M-EMS to immobilize As in the soil are complex reactions, ion exchange reaction with As and electrostatic adsorption. This work provides new ideas of using waste residue matrix composites for sustainable remediation of Arsenic in the aquatic environment and soil.

LED-light-driven over ZnO/biochar nanocomposite for activation of peroxymonosulfate to enhanced photocatalytic removal of methyl orange dye in aqueous solutions

ABSTRACTOrganic dyes are stable and persistent toxic compounds in the aquatic environment that are refractory to decompose by removal methods such as physico-chemical, optical and biological. Their presence in the aquatic media threatens human and wildlife. Herein, ZnO nanoparticles (NPs) due to good chemical durability, low cost and good photocatalytic performance was anchored on biochar (ZnO@biochar) nanocomposites were synthesized towards activation of peroxymonosulfate (PMS) for the photocatalytic removal of methyl orange (MO) dye. Several methods were used to characterization of the nanocomposites including FESEM, XRD, PL, EDS, FT-IR spectroscopy, and N2 adsorption/desorption. The results of the techniques demonstrated that the well-dispersed ZnO NPs were loaded onto the biochar surface. According to the particle size distribution graph, the average particle size of 64 nm was obtained for the ZnO NPs. BET analyzes showed that pore volume, the specific surface area (SSA) and average pore size of the synthesized nanocomposite increased. The survey of effective operational parameters indicated that the highest photocatalytic activity for MO removal was in the pH 3 of solution, 5 ppm initial dye concentration, 30 mg ZnO/biochar nanocomposite, and 20 mg PMS dose under LED-50W lamp irradiation (97.03% in the reaction time of 80 min). During the process, the reduction of the total organic carbon (TOC) contents and chemical oxygen demand (COD) were observed. Moreover, the MO degradation kinetics under optimal operating conditions were determined. It is concluded that the ZnO@biochar nanocomposite/PMS process was an efficient degradation method for the decomposition of the dye pollutant.

Facile One-Step Pyrolysis of ZnO/Biochar Nanocomposite for Highly Efficient Removal of Methylene Blue Dye from Aqueous Solution

In this work, we developed a facile one-step pyrolysis method for preparing porous ZnO/biochar nanocomposites (ZBCs) with a large surface area to enhance the removal efficiency of dye from aqueous solution. Peanut shells were pyrolyzed under oxygen-limited conditions with a molten salt ZnCl2, which played the roles of the activating agent and precursor for the formation of nanoparticles. The effects of the mass ratio between the molten salt ZnCl2 and peanut shells as well as pyrolysis temperature on the formation of ZBCs were investigated. Characterization results revealed that the as-synthesized ZBCs exhibited a highly porous structure with a specific surface area of 832.12 m2/g, suggesting a good adsorbent for efficient removal of methylene blue (MB). The maximum adsorption capacity of ZBCs on MB was 826.44 mg/g, which surpassed recently reported adsorbents. The formation mechanism of ZnO nanoparticles on the biochar surface was due to ZnCl2 vaporization and reaction with water molecules extracted from the lignocellulosic structures. This study provides a basis for developing a simple and large-scale synthesis method for wastewater with a high adsorption capacity.

Green metal oxides coated biochar nanocomposites preparation and its utilization in vertical flow constructed wetlands for reactive dye removal: Performance and kinetics studies

Major causes of water pollution in the ecosystem are pollutants such as dyes which are noxious. The present study was based on the synthesis of the green nano-biochar composites from cornstalk and green metal oxide resulting in Copper oxide/biochar, Zinc oxide /biochar, Magnesium oxide/biochar, Manganese oxide/biochar, biochar for removal of dyes combined with the constructed wetland (CW). Biochar Augmentation in constructed wetland systems has improved dye removal efficiency to 95% in order of copper oxide/biochar > Magnesium oxide/biochar > Zinc oxide/biochar > Manganese oxide/biochar > biochar > control (without biochar) respectively in wetlands. It has increased the efficiency of pH by maintaining pH 6.9-7.4, while Total Suspended Solids (TSS) removal efficiency and Dissolved oxygen (DO) increased with the hydraulic retention time of about 7 days for 10 weeks. Chemical oxygen demand (COD) and colour removal efficiency increased with the hydraulic retention time of 12 days for 2 months and there was a low removal efficiency for total dissolved solids (TDS) from control (10.11%) to Copper oxide /biochar (64.44%) and Electrical conductivity (EC) from control (8%) to Copper oxide /biochar (68%) with the hydraulic retention time of about 7 days for 10 weeks. Colour and chemical oxygen demand removal kinetics followed second and first-order kinetic. A significant growth in the plants were also observed. These results proposed the use of agricultural waste-based biochar as part of a constructed wetland substratum can provide enhanced removal of textile dyes. That can be reused.

Potential exploration of Fe3O4/biochar from sludge as the media of bioretention system and its comparison with conventional media

The selection and configuration of soil media are a core issue of the bioretention system. A porous carbon material of Fe₃O₄/biochar (BSF) was prepared by adding pickling wastewater to modified sludge biochar, which could serve as a good adsorption performance and cheap media for bioretention system. Through the analytic hierarchy process (AHP), different media were evaluated according to their characteristics. By comparing the characteristics of BSF to bio-ceramic (BC), zeolite (ZE), and activated carbon (AC), it was found that BSF has a larger specific surface area and pore volume. The hydrological characteristics of the medium were also tested. The results show that BSF has better water-absorbing quality and hydraulic conductivity than the other three media, but the water-retention property of the medium seems to be inferior. BSF has stable adsorption performance for ammonia nitrogen (NH₄⁺-N) and total phosphorus (TP) in rainwater. Its high adsorption capacity is maintained at 5-35°C, but it is very susceptible to pH factors. The adsorption process by BSF and other media conforms to pseudo-second-order kinetics and the Langmuir model in rainwater. In general, the performance of BSF is shown to be superior to BC, ZE, and AC, making it a potential medium for bioretention system.

Evaluating the Heavy Metal Risk in Spinacia oleracea L. and Its Surrounding Soil with Varied Biochar Levels: A Pot Experiment

Spinacia oleracea L., as the most widely cultivated green leafy vegetable in China, can threaten human health in cases of its excessive heavy metal content, especially in mining areas of karst landforms. Therefore, the present study mainly investigates whether biochar is useful for remediating heavy metal pollution in soil and S. oleracea and the degree of this improvement in karst areas. The effects of heavy metal exposure on the health of children and adults in S. oleracea and rhizosphere lime soil with six biochar levels are evaluated by a health risk assessment, namely, 4000 g of lime soil (C-0), 160 g of biochar + 3840 g of lime soil (C-160), 240 g of biochar + 3760 g of lime soil (C-240), 320 g of biochar + 3680 g of lime soil (C-320), 400 g of biochar + 3600 g of lime soil (C-400) and 800 g of biochar + 3200 g of lime soil (C-800). The results show that the pH values of the lime soil were positively correlated with Pb, P and K contents and negatively correlated with As, Cr, Hg, Cd and N contents in S. oleracea. The assessments of the potential ecological risk index show that the soil samples for the C-0 and C-160 levels pose moderate ecological hazards, while the soil samples for the C-320, C-800, C-400 and C-240 levels constitute mild ecological hazards. The single noncarcinogenic risks, total noncarcinogenic risk indexes, single carcinogenic risks and total carcinogenic risks values indicate that exposure to heavy metals in lime soil and S. oleracea poses a serious threat to human health. It also presents an unacceptable cancer risk and children are more threatened than adults. Our results suggest that heavy metal pollution of S. oleracea and its rhizosphere lime soil in karst areas still poses a threat to human health after adding biochar, and the relevant local departments need to implement more active measures to solve the excessive heavy metal contents in the local soil and vegetables of this karst regions.

Formation and mechanisms of nano-metal oxide-biochar composites for pollutants removal: A review

Biochar, a carbon-rich material, has been widely used to adsorb a range of pollutants because of its low cost, large specific surface area (SSA), and high ion exchange capacity. The adsorption capacity of biochar, however, is limited by its small porosity and low content of surface functional groups. Nano-metal oxides have a large SSA and high surface energy but tend to aggregate and passivate because of their fine-grained nature. In combining the positive qualities of both biochar and nano-metal oxides, nano-metal oxide-biochar composites (NMOBCs) have emerged as a group of effective and novel adsorbents. NMOBCs improve the dispersity and stability of nano-metal oxides, rich in adsorption sites and surface functional groups, maximize the adsorption capacity of biochar and nano-metal oxides respectively. Since the adsorption capacity and mechanisms of NMOBCs vary greatly amongst different preparations and application conditions, there is a need for a review of NMOBCs. Herein we firstly summarize the recent methods of preparing NMOBCs, the factors influencing their efficacy in the removal of several pollutants, mechanisms underlying the adsorption of different pollutants, and their potential applications for pollution control. Recommendations and suggestions for future studies on NMOBCs are also proposed.

Effects of tall fescue biochar on the adsorption and desorption of atrazine in different types of soil

The excessive application of atrazine in agriculture has resulted in serious environmental contamination. The addition of biochar could reduce the bioavailability and mobility of atrazine in soil through adsorption-desorption processes. In this study, tall fescue biochar was prepared at 500 °C, and its effect on the adsorption-desorption behavior of atrazine in red soil, brown soil, and black soil was investigated. The tall fescue biochar with the pH value of 9.64 had a developed porous structure and large specific area that contained abundant surface functional groups. The element composition of the tall fescue biochar was C (50.46%), O (15.01%), N (4.54%), H (2.56%), and S (1.47%). The adsorption process of atrazine in the three soil types with and without biochar addition was divided into a fast stage, slow stage, and equilibrium stage. A pseudo second-order kinetic model was suitable for fitting the adsorption process of atrazine, and the determination coefficient (R²) ranged from 0.985 to 0.999. The adsorption-desorption processes of atrazine were described accurately by the Freundlich model (R² of 0.967-0.999). The adsorption capacity of the three soil types for atrazine increased significantly with the addition of biochar, whereby the equilibrium adsorption amount increased from an initial range of 3.968 to 5.902 μg g^-1 to a final range of 21.397 to 21.968 μg g^-1. The desorption of atrazine was also inhibited as the hysteresis coefficient (HI) increased from an initial range of 0.451 to 0.586 to a final range of 0.916 to 0.941. The adsorption capacity of the red soil improved more than did the brown soil or black soil. Moreover, spontaneous adsorption of atrazine by the biochar-soil system occurred more easily at 35 °C than at 15 °C and 25 °C. Overall, tall fescue biochar was a prospective soil amendment material.