Lead isotope ratios as tool for elucidation of chemical environment in a system of Macrolepiota procera (Scop.) Singer - soil

Accumulation and within-mushroom distribution of elements in red cracking bolete (Xerocomellus chrysenteron) collected over the extended period from compositionally contrasting substrates

We conducted a study of elemental compositions of Xerocomellus chrysenteron samples accompanied by samples of related substrate soils. All samples were collected during the harvesting seasons 2021 and 2022 from three forested sites almost unpolluted by recent human activities and underlain by contrasting bedrock (granite, amphibolite, and serpentinite). Elements such as Ag, Cd, K, P, Rb, S, Se, and Zn were the main elements enriched in the mushroom's fruiting bodies relative to the substrate. Concentrations of most elements in mushrooms were not site-dependent, with only Ag, As, Rb, and Se concentrations significantly depending on the bedrock composition. Some elements analyzed in mushrooms displayed temporal features, but such features were not systematic and varied for each element. Most analyzed elements were distributed unevenly within the mushroom's fruiting bodies, with apical parts generally enriched in mobile elements. Mushrooms influenced concentrations of Ag, Cd, K, and Rb and a few other elements in the substrate via uptake, but such influence was very limited and can be responsible for only 2.5-11.5% of total depletion of the affected substrate in the named elements.

Translocation of elements and fractionation of Mg, Cu, Zn, and Cd stable isotopes in a penny bun mushroom (Boletus edulis) from western Czech Republic

Boletus edulis mushroom behaved as an accumulating biosystem with respect to Ag, Rb, Zn, and K. The mushroom was not an efficient accumulator of toxic As, Pb, and Cr, but Se and Cd displayed much higher concentrations in the mushroom than in the substrate samples. Other elements were bioexclusive. Different elements had different within-mushroom mobilities. The highest mobilities were displayed by Zn and Ag, and the lowest by Ti. The mushroom's fruiting body preferentially took up lighter Mg, Cu, and Cd isotopes (Δ26MgFB-soil =  -0.75‰; Δ65CuFB-soil =  -0.96‰; Δ114CdFB-soil =  -0.63‰), and the heavier 66Zn isotope (Δ66ZnFB-soil = 0.92‰). Positive within-mushroom Zn isotope fractionation resulted in accumulation of the heavier 66Zn (Δ66Zncap-stipe = 0.12‰) in the mushroom's upper parts. Cadmium displayed virtually no within-mushroom isotope fractionation. Different parts of the fruiting body fractionated Mg and Cu isotopes differently. The middle part of the stipe (3-6 cm) was strongly depleted in the heavier 26 Mg with respect to the 0-3 cm (Δ26Mgstipe(3-6)-stipe(0-3) =  -0.73‰) and 6-9 cm (Δ26Mgstipe(6-9)-stipe(3-6) = 0.28‰) sections. The same stipe part was strongly enriched in the heavier 65Cu with respect to the 0-3 cm (Δ65Custipe(3-6)-stipe(0-3) = 0.63‰) and 6-9 cm (Δ65Custipe(6-9)-stipe(3-6) =  -0.42‰) sections. An overall tendency for the upper mushroom's parts to accumulate heavier isotopes was noted for Mg (Δ26Mgcap-stipe = 0.20‰), Zn (Δ66Zncap-stipe = 0.12‰), and Cd (Δ114Cdcap-stipe = 0.04‰), whereas Cu showed the opposite trend (Δ65Cucap-stipe =  -0.08‰).

Cadmium in the hyperaccumulating mushroom Thelephora penicillata: Intracellular speciation and isotopic composition

Thelephora penicillata is an ectomycorrhizal mushroom that can accumulate extraordinarily high concentrations of Cd, As, Cu, and Zn in its fruit-bodies. To better understand its element accumulation ability, we compared the element concentrations in T. penicillata with 10 distinct ectomycorrhizal mushroom species growing at the same site (Karlina Pila, Czech Republic). On average, T. penicillata accumulated 330, 2130, 26, and 4 times more Cd, As, Cu, and Zn, respectively, than other mushrooms. Size-exclusion chromatography and an electrophoretic analysis of T. penicillata cell extracts indicate that intracellular Cd may be present mainly in >1 kDa, presumably compartmentalized, Cd species, and partially binding with 6-kDa cysteinyl-containing peptide(s) resembling metallothioneins. The cadmium isotopic composition of mushroom fruit-bodies, soil digests, and soil extracts was investigated by thermal ionization mass spectrometry (TIMS) with double spike correction. The isotopic composition (δ^114/110Cd) of ectomycorrhizal mushrooms from Karlina Pila varied in a wide range of -0.37 to +0.14 ‰. However, remarkably low δ^114/110Cd values were observed in the majority of the investigated mushrooms when compared to the relatively homogeneous Cd isotopic composition of bulk soil (δ^114/110Cd = +0.09 ‰) and the comparatively heavy isotopic composition of soil extracts (mean δ^114/110Cd values of +0.11 ± 0.01 ‰ and +0.22 ± 0.01 ‰, depending on the extraction method). The isotopic composition of Cd hyperaccumulated in T. penicillata essentially matched the mycoavailable soil Cd fraction. However, most isotopic data indicates isotopic fractionation at the soil/fruit-body interface, which could be of environmental significance.

Nutritional and Other Trace Elements and Their Associations in Raw King Bolete Mushrooms, Boletus edulis

The occurrence and associations of Ag, As, Ba, Bi, Cd, Co, Cu, Cs, Hg, Ni, Pb, Rb, Sb, Sr, Tl, U, V, W, and Zn, including data that have not been previously reported on Be, Hf, In, Li, Mo, Nb, Sn, Ta, Th, Ti and Zr, and the sum of (14) rare earth elements (ƩREE), were studied in a spatially diverse collection of the B. edulis caps, stipes, and whole fruiting bodies using a validated procedure with measurement by quadrupole ICP-MS. Toxic Cd and Pb were in B. edulis at concentrations below limits set by the European Union in regulations for raw cultivated mushrooms, while Ag, As, Hg, Sb, Tl, and U, which are not regulated, were at relatively low or typical levels as is usually found in mushrooms from an unpolluted area. The elements Be, Bi, Ga, Ge, Hf, In, Nb, Ta, Th, and W, and also ƩREEs, were found at relatively low concentrations in B. edulis, i.e., with levels from below 0.1 to below 0.01 mg kg-1 dw, and for Ʃ14 REEs, the median was 0.31 mg kg-1 dw. The composite samples of caps showed Ag, Cd, Cu, Cs, Ga, Ge, Hg, Mo, Ni, Rb, Sb, Ti, and Zn at higher concentrations than stipes, while Ba, Co, Hf, Sr, Tl, and Zr were found at higher concentrations in stipes than caps (p < 0.05). Mushrooms were characterized by a low coefficient of variation (CV) of below 20%, between sites for concentrations of As, Cu, Ge, Hg, Ni, V, and Zn, while substantial differences (CV > 100%) were found for Ba, Bi, Co, Hf, Zr, and ƩREEs, and an intermediate variation was found for Sr, W, and U. Principal component analysis performed on mushrooms allowed differentiation with respect to 13 collection sites and separation of a consignment that was specifically contaminated, possibly due to a legacy pollution, with significantly higher levels of Ba, Co, Ga, Li, Nb, Ni, Sr, Th, Ti, Y, Zr, and ƩREEs, and another due to possible recent pollution (Pb-gasoline and also Ni); two due to geological contamination because of the Bi, In, Sc, Sb, Sn, Ta, V and W; and one more, the Sudety Mts. site, which was considered as "geogenic/anthropogenic" due to Ag, As, Be, Cd, Cs, Ni, Pb, Rb, Tl, and U.

Is a Lead Isotope Ratios in Wine Good Marker for Origin Assessment?

Lead isotope ratio pattern (²⁰⁶Pb/²⁰⁷Pb, ²⁰⁸Pb/²⁰⁶Pb, ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb, and ²⁰⁸Pb/²⁰⁴Pb) was analyzed in 59 samples of Serbian wine, from four geographical regions. By utilization of powerful inductively coupled plasma mass spectrometry (ICP-QMS), lead isotope ratios were used as unique "fingerprint", when combined with multivariate methods of analysis (Principal Component Analysis), provided information on the geographical origin of wine. In validation of ICP- QMS method and quantitative analysis, the certified reference material NIST SRM 981 was employed to test the mass-bias correction and thallium isotopes ²⁰³Tl and ²⁰⁵Tl (NIST SRM 997) as an internal standard. The obtained results were discussed in correlation with the corresponding values of LIRs of different European and Australian wines. In addition, the impact of anthropogenic Pb from different sources on the total Pb isotopic composition in Serbian wines was analyzed too. On the other side, the obtained values of Pb content were compared with the applicable health safety standards, according to the International Code of Oenological Practices.

Comprehensive assessment of heavy metal pollution and ecological risk in lake sediment by combining total concentration and chemical partitioning

Total concentration and chemical partitioning of heavy metals are commonly used in environmental quality assessment; however, their comparability and comprehensive application are far less discussed. Herein, bioavailability, pollution and eco-risk of As, Cd, Cr, Cu, Ni, Pb and Zn in surface sediments of Erhai Lake were evaluated referring to multiple indices following the experimental methods of complete digestion, optimized Community Bureau of Reference (BCR) and 1.0 M HCl extractions. Results of bioavailability for most metals were similar and comparable from BCR and HCl extractions. While bioavailable concentrations of Cd and Pb from HCl extraction were significantly (p < 0.01) lower than those from BCR extraction, indicating BCR extraction is more efficient. Results of enrichment factor (EF) and concentration enrichment ratio (CER) suggested that Cd was the highest polluted element followed by As, Pb and Zn, whereas Cr, Cu and Ni were mainly natural in origin. Similar concentrations of anthropogenic As from EF and CER assessments indicated anthropogenic As mainly existed in bioavailable form. However, anthropogenic Cd, Pb and Zn existed in both bioavailable and residue forms, resulting in the underestimation of anthropogenic metals by the CER assessment. The sediment quality guidelines (SQGs), potential ecological risk index (Er) and risk assessment code (RAC) showed inconsistent eco-risks for each of the metals except Cd. Combining pollution level and chemical partitioning with SQGs, Er and RAC assessments, high eco-risk of Cd, moderate eco-risk of As and Pb, and low eco-risk of Cr, Cu, Ni and Zn were graded. Our study highlights the limitation of single index and the necessity of integrating multiple indices following total concentration and chemical partitioning in metal pollution and eco-risk assessments.