One-pot synthesis of Cr(III)-incorporated Zr(IV) oxide for fluoride remediation: a lab to field performance evaluation study

Performance and mechanism of La-Fe metal-organic framework as a highly efficient adsorbent for fluoride removal from mine water

Water fluoride pollution has caused non-negligible harm to the environment and humans, and thus it is crucial to find a suitable treatment technology. In this study, La-Fe@PTA adsorbent was synthesized for the defluoridation of mine water. The results showed that the optimum conditions for defluoridation by La-Fe@PTA were pH close to 7.0, the initial F- concentration of 10 mg/L, the dosage of 0.5 g/L and the adsorption time of 240 min. Compared with SO42‒, Cl‒, NO3‒, Ca2+ and Mg2+, CO32‒ and HCO3‒ presented severer inhibition on fluoride uptake by La-Fe@PTA. The adsorption process fits well with the pseudo-second-order kinetic model and Freundlich model, and the maximum adsorption capacity of Langmuir model was 95 mg/g. Fixed-bed adsorption results indicated that fluoride in practical fluorinated mine water could be effectively removed from 3.6 mg/L to less than 1.5 mg/L within 130 bed volume (BV) by using 1.5 g La-Fe@PTA. Furthermore, the adsorbent still had good adsorption capacity after regeneration, which confirms the great application potential of La-Fe@PTA as a fluoride ion adsorbent. The mechanism analysis showed that La-Fe@PTA adsorption of fluorine ions is a physicochemical reaction driven by electrostatic attraction and ion exchange.

Humic acid-nanoceria composite as a sustainable adsorbent for simultaneous removal of uranium(VI), chromium(VI), and fluoride ions from aqueous solutions

In this article, the multifunctional behavior of novel, efficient, and cost-effective humic acid-coated nanoceria (HA@CeO2 NPs) was utilized for the sorptive removal of U(VI), Cr(VI), and F- ions at different conditions. The production cost of HA@CeO2 was $19.28/kg and was well characterized by DLS, FESEM, HRTEM, FTIR, XRD, XPS, and TGA. Batch adsorption study for U(VI) (at pH ~ 8), Cr(VI) (at pH ~ 1), and F- (at pH ~ 2) revealed that the maximum percentage of sorption was > 80% for all the cases. From the contact time experiment, it was concluded that pseudo-second-order kinetics followed, and hence, the process should be a chemisorption. The adsorption study revealed that U(VI) and Cr(VI) followed the Freundlich isotherm, whereas F- followed the Langmuir isotherm. Maximum adsorption capacity for F- was 96 mg g-1. Experiments in real water suggest that adsorption is decreased in Kaljani River water (~ 12% for Cr(VI) and ~ 11% for F-) and Kochbihar Lake water (25.04% for Cr(VI) and 20.5% for F-) because of competing ion effect. Mechanism was well established by the kinetic study as well as XPS analysis. Because of high adsorption efficiency, HA@CeO2 NPs can be used for the removal of other harmful water contaminants to make healthy aquatic life as well as purified drinking water.

One-pot synthesis of novel mesoporous FeOOH modified NaZrH(PO4)2·H2O for the enhanced removal of Co(II) from aqueous solution

One-pot synthesis of a novel mesoporous hydroxyl oxidize iron functional Na-zirconium phosphate (FeOOH-NaZrH(PO4)2·H2O) composites was firstly characterized and investigated its Co(II) adsorption from aqueous solution. Compared to NaZrH(PO4)2·H2O (65.7 mg⋅g-1), the maximum Co(II) adsorption capacity of FeOOH-NaZrH(PO4)2·H2O was improved to be 95.1 mg⋅g-1. BET verified the mesoporous structures of FeOOH-NaZrH(PO4)2·H2O with a larger pore volume than NaZrH(PO4)2·H2O. High pH values, initial Co(II) concentration, and temperature benefited the Co(II) adsorption. Kinetics, isotherms, and thermodynamics indicated an endothermic, spontaneous chemisorption process. FeOOH-NaZrH(PO4)2·H2O has a better Co(II) adsorption selectivity than that of NaZrH(PO4)2·H2O. In particular, FeOOH-NaZrH(PO4)2·H2O exhibited an outstanding reusability after ten cycles of tests. The main possible mechanism for adsorbents uptake Co(II) involved in ion exchange, electrostatic interaction, and -OH, Zr-O bond coordination based on FTIR and XPS analysis. This work presents a feasible strategy to prepare novel modified zirconium phosphate composites for extracting Co(II) from solutions and providing a new insight into the understanding of Co(II) adsorption in the real nuclear Co(II)-containing wastewater.

High-performance lanthanum-based metal-organic framework with ligand tuning of the microstructures for removal of fluoride from water

Excess fluoride in water poses a threat to ecology and human health, which has attracted global attention. In this study, a series of lanthanum-based metal-organic frameworks (La-MOFs) were synthesized by varying the organic ligands (i.e., terephthalic acid (BDC), trimesic acid (BTC), biphenyl-4,4-dicarboxylic acid (BPDC), 2,5-dihydroxyterephthalic acid (BHTA), and 1,2,4,5-benzenetetracarboxylic acid (PMA)) to control the microscopic structure of the MOFs and subsequently apply them for the removal of fluoride in water. The maximum capture capacities of La-BTC, La-BPDC, La-BHTA, La-PMA, and La-BDC at 298 K are 105.2, 125.9, 145.5, 158.9, and 171.7 mg g^-1, respectively. The adsorption capacity is greater than most reported adsorbents. The adsorption isotherms of La-MOFs for fluoride are well fit to the Langmuir isotherm model. In addition, the adsorption kinetics of La-BTC, La-BPDC, La-BHTA, La-PMA, and La-BDC follows the pseudo-second-order kinetic model, and the kinetic rate-limiting step of adsorption is chemical adsorption. Thermodynamics revealed that temperature is favorable for the adsorption of fluoride. Meanwhile, La-BTC, La-BPDC, La-BHTA, La-PMA, and La-BDC are suitable for the removal of fluoride in a relatively wide pH range (4.0-9.0). Simultaneously, from X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) analysis, electrostatic attraction and ligand exchange are identified as the main action mechanisms for the adsorption of fluoride of La-MOFs. The prepared La-MOFs are used as efficient adsorbents for removal of fluoride in actual water, indicating that they have great potential in removing fluoride in real and complex environmental water. This work provides a new strategy for designing adsorbents with adjustable microstructure and expected function to effectively recover fluorosis in water.