Potential of windrow food and green waste composting in Tunisia

Incorporation of Substrates and Inoculums as Operational Strategies to Promote Lignocellulose Degradation in Composting of Green Waste—A Pilot-Scale Study

Composting is a sustainable alternative for green waste (GW) valorization contributing to the circular bioeconomy. However, the processing time must be reduced and the end-product quality must be improved. This study determined the effect of the incorporation of processed food waste (PFW), unprocessed food (UPFW), sawdust (SW), phosphate rock (PR) and a specific bacterial inoculum on GW-composting process parameters and product quality. Three treatments were evaluated in 120 kg piles: (i) TA: (GW + UPFW + PFW + inoculum), (ii) TB (GW + UPFW + PFW), and (iii) TC (GW). An inoculum of Bacillus sp. and Paenibacillus sp. was incorporated in the cooling phase for TA. On the other hand, the effect of the inoculum at the laboratory scale (20 kg reactors) was compared with that found at the pilot scale (120 kg piles). The incorporation of FW, SW, PR and the inoculum increased the amount of lignocellulose biodegradation (TA: 29.1%; TB: 22.7%; TC: 18.2%), which allowed for a reduction of up to 14 days of processing time. The product obtained for TA had a similar quality to the other two treatments, although a lower phytotoxicity was determined according to the germination index (TA: 95%; TB: 85%; and TC: 83%). The final product of TA showed the best agricultural characteristics with pH 8.3, TOC of 24.8%, TN of 1.32%, and GI of 98.8%. Finally, the scaling effect with the bacterial inoculum was shown to affect parameters such as the TOC, TN, GI, and, to a lesser extent, temperature and pH. The results obtained in this paper highlight the importance of optimizing the composting of GW, specifically with the use of co-substrates and specific inocula, which can be of interest for composting materials with a high content of lignocellulose such as GW.

Effect of biochar addition on the improvement of the quality parameters of compost used for land reclamation

The 5% addition of biochar in composting in rows contributes significantly to reducing volatile organic compound(VOC) emissions. When composting with the addition of biochar, the average temperature increased by 13 ± 6.7 °C during the whole period, and the thermophilic phase was extended by 11 days. The higher temperature supported a reduction in the time necessary for achieving the biological stability observed by the oxygen uptake rate by more than 10 days. For organic compounds formed by the degradation of easily degradable primary components (proteins), the addition of biochar significantly reduces the release of organic compounds with heterocyclically bound nitrogen (N_org-VOCs) and volatile sulfur compounds (VSCs). The end of the biodegradation process is indicated by a decrease in VOC concentrations below initial values in the input material. This state was achieved in the compost with added biochar after 47 days, while in compost without added biochar, it lasted 60 days.

Composting effect and antibiotic removal under a new temperature control strategy

The main objective of this study was to investigate the feasibility of a new temperature control strategy in the co-composting process to accelerate operation cycle and remove antibiotics from mixed organic wastes. The evaluation of the composting process showed that composting with temperature control (TC) was completed within 14 days. The final compost of TC exhibited a 10% higher degradation of organic matters, more humus formation and 11.25% lower heavy metals concentration than conventional composting (CC), which fully met the Chinese National Agricultural Organic Fertilizer Standard requirements. The degradation extent and kinetic of macrolides, tetracyclines, sulfonamides and fluoroquinolones showed that the removal efficiency of total antibiotics in TC was 23.58% higher than CC, with less half-life, which was significantly correlated with higher temperature. Particularly, the highest removal was observed for sulfonamides (87.45%) in TC, the half-life of which was reduced by 75.95% compared with CC. The higher degradation rate was attributed to enhanced decomposition of unstable antibiotics and degrading activity of microbes at high temperature. The microbiological analysis showed that the external heating led to a distinct composition and succession of bacterial community in TC. Firmicutes, Proteobacteria, Actinobacteriota and Bacteroidota were dominant and the emergence of Patescibacteria and Chloroflexi at cooling period in TC proved that the later composting environment was in an oligotrophic state. Current research provided a promising rapid composting approach for high-quality fertilizer production and antibiotic management in organic waste disposal.

Evaluation of Physio-Chemical Characteristics of Bio Fertilizer Produced from Organic Solid Waste Using Composting Bins

Background: The possibility of converting the organic fraction of municipal solid waste to mature compost using the composting bin method was studied. Nine distinct treatments were created by combining municipal solid waste (MSW) with animal waste (3:1, 2:1), poultry manure (3:1, 2:1), mixed waste (2:1:1), agricultural waste (dry leaves), biocont (Trichoderm hazarium), and humic acid. Weekly monitoring of temperature, pH, EC, organic matter (OM percent), and the C/N ratio was performed, and macronutrients (N, P, K) were measured. Trace elements, including heavy metals (Cd and Pb), were tested in the first and final weeks of maturity. Results: Temperatures in the first days of composting reached the thermophilic phase in MSW compost with animal and poultry manure between 55–60 °C, pH and EC (mS/cm) increased during the composting period in most composting bin treatments. Overall, organic matter (OM percent) and the C/N ratio decreased (10.27 to 18.9) as result of microbial activity during composting. Organic matter loss percent was less in treatments containing additives (biocont l humic acid) as well agricultural waste treatment. Composting bin treatments with animals and poultry showed higher K and P at the mature stage with an increase in micronutrients. Finally heavy metals were (2.25–4.20) mg/kg and (139–202) mg/kg for Cd and Pb respectively at maturation stage. Conclusion: Therefore, the results suggested that MSW could be composted in the compost bin method with animal and poultry manure. The physio-chemical parameters pH, Ec and C/N were within the acceptable standards. Heavy metals and micronutrients were under the limits of the USA standards. The significance of this study is that the compost bin may be used as a quick check to guarantee that the outputs of long-term public projects fulfill general sustainability requirements, increase ecosystem services, and mitigate the effect of municipal waste disposal on climate change particularly the hot climate regions.

Solid Waste Management in the Context of a Circular Economy in the MENA Region

Solid waste management in most MENA countries is characterized by lack of planning, improper disposal, inadequate collection services, inappropriate technologies that suit the local conditions and technical requirements, and insufficient funding. Therefore, waste management is mainly limited to collection, transportation, and disposal. As the circular economy has recently been given high priority on the MENA region’s political agenda, all MENA member states are seeking to move away from old-fashioned waste disposal, “waste management”, towards a more intelligent waste treatment, “resource efficiency”. This paper presents a comprehensive overview of national systems for municipal solid waste (MSW) management, and material and energy recovery as an important aspect thereof, in the context of the circular economy in selected countries in the MENA region. Since policy, regulation, and treatment technologies are traditionally connected to MSW management, the focus of this article is twofold. Firstly, it aims to identify the different practices of solid waste management employed in selected MENA region countries and their approaches to embracing the circular economy and, secondly, it examines the extent to which policies and technologies applied play any role in this context. The study revealed that most waste management issues in the countries analyzed appear to be due to political factors and the decentralized nature of waste management with multi-level management and responsibilities. In fact, material and energy recovery in the context of municipal solid waste management does not differ significantly in the countries in the MENA region considered. In most cases, “waste” is still seen as “trouble” rather than a resource. Therefore, a fresh vision on how the solid waste management system can be transformed into a circular economy is required; there is a need for paradigm shift from a linear economy model to a circular-economy model.

From anaerobic to aerobic treatment: upcycling of digestate as a moisturizing agent for in-vessel composting process

In Tunisia, there are crucial challenges facing both urban and rural areas, the most prominent of which are the production of organic waste, the need for waste treatment, the demand for water and energy and the need for a circular economy. To this end, the study was designed to develop a technical concept on closed cycle ‘biowaste to bioenergy’ treating, basically food waste (FW) through combined biological processes. In this approach, the generated digestate from FW anaerobic reactors was used successfully as a moisturizing agent for FW in-vessel composting. Four types of digestate were examined to be used as moisturizing agent (MA). The selection of the appropriate MA was achieved based on technical criteria; moisture content (MC), C:N ratio and heavy metals concentrations. The findings showed that the digestate obtained from anaerobic co-digestion of food waste and wheat straw (D1) was the most efficient AD-effluent to be added. In terms of composting process performance, the thermophilic phase of the amended reactor (A1) lasted 16 days and reached higher temperatures of about 72 °C, while the unamended one (A1) was characterized by a thermophilic temperature of around 66 °C indicating that the end products were of a pathogen-free compost. When it comes to the physico-chemical factors examined demonstrating that the biological conditions were sufficiently developed. The findings showed overall decreasing profiles during the composting period for moisture, C:N ratio as well as nitrification index (NI). From the quality-point of view, it was found that heavy metal concentrations had lower limits than those values set by German standards. Moreover, all the compost samples appeared to be stable and classified as class IV and V end product.

Potential of Sustainable Concept for Handling Organic Waste in Tunisia

Nowadays, Tunisia is seeking to implement cost-efficient and sustainable solutions in relation to the treatment of organic waste which, at up to 65%, makes up the largest proportion of total waste generated in the country. Therefore, an efficient tool for decision makers is needed to provide a clear approach about the potential of organic waste as well as the treatment concept, which can be adapted based on technical requirements and local conditions. Results revealed that there is a high variation in terms of the nature of the collected biowaste, which affects the selection of the adopted bioprocess for each geographical zone of the study area. Three main categories of biowaste are produced along the coastline of Tunisia: food waste (FW) (102.543 t/a); green waste (GW) (1.326.930 t/a); and cattle manure (CM) (1.548.350 t/a). Based on the results of similar projects and laboratory-scale research work, anaerobic and aerobic digestion were examined. Regarding aerobic digestion, the monitoring of several physicochemical parameters ascertained that the co-composting of FW and GW at different ratios (GW: FW = 100:0, 75:25, 50:50, and 25:75) allowed the production of a stable and mature compost. A highly qualified end-product was generated from each trial categorized as a finished compost of class V with reference to German Standards of compost. Regarding the anaerobic process, different feedstock mixtures (FW:CM = 0:1, 1:1, 2:1, and 3:1) were prepared to feed semi-continuous anaerobic reactors. However, a significant improvement in the process development was recorded for digesters including a higher fraction of FW, which produced 0.846 LN/kg VSin as the maximum biogas production. Therefore, biological treatments of food waste and different co-substrates seems to be a suitable technique for Tunisia in terms of waste management, environmental, and energy aspects. However, the evaluation of the efficiency of the proposed biological treatments was also verified by a draw-up of a technical and economic feasibility analysis. Although the cost–benefit estimations proved that the profits from both the compost and biogas plants would be very modest, the feasibility of such sustainable projects should not only be evaluated on an economic basis, but also by taking into account socio-environmental considerations including decreasing environmental threats, providing work opportunities, increasing incomes, stimulating public awareness as well as reducing the operating costs linked to landfilling.