Bismuth vanadate/MXene (BiVO4/Ti3C2) heterojunction composite: enhanced interfacial control charge transfer for highly efficient visible light photocatalytic activity

A H2O2 Oxidation Approach to Ti3C2/TiO2 for Efficient Photocatalytic Removal of Distinct Organic Pollutants in Water

To develop versatile photocatalysts for efficient degradation of distinct organic pollutants in water is a continuous pursuit in environment remediation. Herein, we directly oxidize Ti3C2 MXene with hydrogen peroxide to produce C-doped anatase TiO2 nanowires with aggregates maintaining a layered architecture of the MXene. The Ti3C2 MXene provides a titanium source for TiO2, a carbon source for in situ C-doping, and templates for nanowire aggregates. Under UV light illumination, the optimized Ti3C2/TiO2 exhibits a reaction rate constant 1.5 times that of the benchmark P25 TiO2 nanoparticles, toward photocatalytic degradations of trace phenol in water. The mechanism study suggests that photogenerated holes play key roles on the phenol degradation, either directly oxidizing phenol molecules or in an indirect way through oxidizing first the surface hydroxyl groups. The unreacted Ti3C2 MXene, although with trace amounts, is supposed to facilitate electron transfer, which inhibits charge recombination. The unique nanostructure of layered aggregates of nanowires, abundant surface oxygen vacancies arising from the carbon doping, and probably the Ti3C2/TiO2 heterojunction guarantee the high photocatalytic efficiency toward removals of organic pollutants in water. The photocatalyst also exhibits an activity superior to, or at least comparable to, the benchmark P25 TiO2 toward photodegradations for typical persistent organic pollutants of phenol, dye molecule of rhodamine B, antibiotic of tetracycline, pharmaceutical wastewater of ofloxacin, and pesticide of N,N-dimethylformamide, when evaluated in total organic carbon removal.

Recent advances in visible light-activated photocatalysts for degradation of dyes: A comprehensive review

The rapid development in industrialization and urbanization coupled with an ever-increasing world population has caused a tremendous increase in contamination of water resources globally. Synthetic dyes have emerged as a major contributor to environmental pollution due to their release in large quantities into the environment, especially owing to their high demand in textile, cosmetics, clothing, food, paper, rubber, printing, and plastic industries. Photocatalytic treatment technology has gained immense research attention for dye contaminated wastewater treatment due to its environment-friendliness, ability to completely degrade dye molecules using light irradiation, high efficiency, and no generation of secondary waste. Photocatalytic technology is evolving rapidly, and the foremost goal is to synthesize highly efficient photocatalysts with solar energy harvesting abilities. The current review provides a comprehensive overview of the most recent advances in highly efficient visible light-activated photocatalysts for dye degradation, including methods of synthesis, strategies for improving photocatalytic activity, regeneration and their performance in real industrial effluent. The influence of various operational parameters on photocatalytic activity are critically evaluated in this article. Finally, this review briefly discusses the current challenges and prospects of visible-light driven photocatalysts. This review serves as a convenient and comprehensive resource for comparing and studying the fundamentals and recent advancements in visible light photocatalysts and will facilitate further research in this direction.

Tailoring of Visible to Near-Infrared Active 2D MXene with Defect-Enriched Titania-Based Heterojunction Photocatalyst for Green H2 Generation

A wide solar light absorption window and its utilization, long-term stability, and improved interfacial charge transfer are the keys to scalable and superior solar photocatalytic performance. Based on this objective, a noble metal-free composite photocatalyst is developed with conducting MXene (Ti3C2) and semiconducting cauliflower-shaped CdS and porous Cu2O. XPS, HRTEM, and ESR analyses of TiOy@Ti3C2 confirm the formation of enough defect-enriched TiOy (where y is < 2) on the surface of Ti3C2 during hydrothermal treatment, thus creating a third semiconducting site with enough oxygen vacancy. The final material, TiOy@Ti3C2/CdS/Cu2O, shows a broad absorption window from 300 to 2000 nm, covering the visible to near-infrared (NIR) range of the solar spectrum. Photocatalytic H2 generation activity is found to be 12.23 and 16.26 mmol g-1 h-1 in the binary (TiOy@Ti3C2/CdS) and tertiary composite (TiOy@Ti3C2/CdS/Cu2O), respectively, with good repeatability under visible-NIR light using lactic acid as the hole scavenger. A clear increase of efficiency by 1.53 mmol g-1 h-1 in the tertiary composite due to NIR light absorption supports the intrinsic upconversion of electrons, which will open a new prospective of solar light utilization. Decreased charge-transfer resistance from the EIS plot and a decrease in PL intensity established the improved interfacial charge separation in the tertiary composite. Compared to pure CdS, H2 generation efficiency is 29.6 times higher on the noble metal-free tertiary composite with an apparent quantum efficiency of 12.34%. Synergistic effect of defect-enriched TiOy formation, creation of proper dual p-n junction on a Ti3C2 sheet as supported by the Mott-Schottky plot, significant NIR light absorption, increased electron mobility, and charge transfer on the conductive Ti3C2 layer facilitate the drastically increased hydrogen evolution rate even after several cycles of repetition. Expectantly, the 2D MXene-based heterostructure with defect-enriched dual p-n junctions of desired interface engineering will facilitate scalable photocatalytic water splitting over a broad range of the solar spectrum.

Recent advancements in MXene-based nanocomposites as photocatalysts for hazardous pollutant degradation - A review

The recent expeditious industrialization and urbanization showcase the increasing need for renewable and non-renewable energy and the severe environmental crisis. In this regard, numerous 2-dimensional (2D) nanomaterials have been developed as a facile approach to meet the futuristic energy essentials and to resolve the crisis. In contrast, the newly explored 2D MXenes (transition metal carbide/nitrides/carbonitride) have been employed as an intriguing material for various environmental applications. This development is accredited to their unique properties, which include a vast surface area, strong electrical conductivity, fascinating photophysical properties, high mechanical properties, stability in an aqueous medium, high hydrophilicity, biocompatibility, ease of functionalization, and excellent thermal properties. MXenes act as a potential candidate in water desalination, energy storage devices such as electrodes of Li-ion batteries and pseudo capacitors, hydrogen production, sensors, and wastewater treatment. This review article deliberates the synthesis of MXene and nanocomposites of MXene and their photo-catalytic actions against various toxic pollutants such as organic dyes and heavy metals in wastewater. This review also precises the various preparation methods of MXene-based photocatalyst and the enhanced photocatalytic activity of MXene and MXene-based nanocomposites in wastewater treatment. Also, it details the attempts made to improve the photocatalytic activity of MXene-based nanocomposites in terms of their structural compositions. In addition, the merits and demerits of the MXene-based photocatalysts are deliberated, which may pave the way for future research in this arena.

Efficient Photocatalytic Reduction of Hexavalent Chromium by BiVO4-Decorated MXene Photocatalysts and Their Charge Carrier Dynamics

The synergistically MXene (Ti3C2Tx) co-catalyst-decorated BiVO4-based heterostructured photocatalysts have been synthesized by a hydrothermal approach with varied loading concentrations of MXene (Ti3C2Tx) to drive the hexavalent chromium reduction efficiently. The formation of the heterostructured photocatalyst was confirmed by the appearance of X-ray diffraction (XRD) peaks corresponding to the monoclinic BiVO4 phase and MXene (Ti3C2Tx) and also the antisymmetric (834 cm-1) and symmetric stretching (715 cm-1) of tetrahedral VO4 and D (1330 cm-1) and G (1570 cm-1) bands corresponding to MXene (Ti3C2Tx) in the Raman spectrum. The worm-like structures of BiVO4 nanocrystals grew onto the lamellar sheets of MXene (Ti3C2Tx), as shown by field emission scanning electron microscopy (FESEM), and has an increased surface area of 15.62 m2g-1 in the case of BVO-20-TC. X-ray photoelectron spectroscopy (XPS) analysis confirms the presence of V5+ and Ti3+states, and the uniform distribution of BiVO4 nanocrystals over lamellar sheets of MXene (Ti3C2Tx) is evident from energy-dispersive X-ray (EDX) analysis. The ultraviolet-diffuse reflectance spectroscopy (UV-DRS) spectra suggest a decrease in the band gap energy of BVO-20-TC to 2.335 eV, promoting a higher degree of visible light harvesting. Upon optimization, by varying the pH, the amount of the photocatalyst, and the concentration of Cr(IV), BVO-20-TC exhibits the highest photocatalytic efficiency (96.39%) while using a Cr(VI) concentration of 10 ppm at pH 2 and 15 mg of the photocatalyst, and the photoreduction of Cr(VI) to Cr(III) follows the pseudo-first-order reaction. The decrease in the PL intensity in BVO-20-TC reveals a faster transfer of electrons from MXene (Ti3C2Tx) to BiVO4. Further, the higher degree of band bending at the BiVO4/MXene (Ti3C2Tx) heterojunction, revealed from the Mott-Schottky analysis, facilitates efficient charge transfer and eventually faster and efficient photoreduction of Cr(VI) to Cr(III). The reusability and stability test undertaken for BVO-20-TC reveals that even after five cycles, the Cr (VI) photoreduction efficacy is retained. This work provides insights into photoreduction of Cr (VI) by using such heterostructures.

Effective photodegradation of antibiotics by guest-host synergy between photosensitizer and bismuth vanadate: Underlying mechanism and toxicity assessment

The removal of antibiotics in wastewater has attracted increasing attention. Herein, a superior photosensitized photocatalytic system was developed with acetophenone (ACP) as the guest photosensitizer, bismuth vanadate (BiVO₄) as the host catalyst and poly dimethyl diallyl ammonium chloride (PDDA) as the bridging complex, and used for the removal of sulfamerazine (SMR), sulfadiazine (SDZ) and sulfamethazine (SMZ) in water under simulated visible light (λ > 420 nm). The obtained ACP-PDDA-BiVO₄ nanoplates attained a removal efficiency of 88.9%-98.2% for SMR, SDZ and SMZ after 60 min reaction and achieved kinetic rate constant approximately 10, 4.7 and 13 times of BiVO₄, PDDA-BiVO₄ and ACP-BiVO₄, respectively, for SMZ degradation. In the guest-host photocatalytic system, ACP photosensitizer was found to have a great superiority in enhancing the light absorption, promoting the surface charge separation-transfer and efficient generation of holes (h⁺) and superoxide radical (·O₂^-), greatly contributing to the photoactivity. The SMZ degradation pathways were proposed based on the identified degradation intermediates, involving three main pathways of rearrangement, desulfonation and oxidation. The toxicity of intermediates was evaluated and the results demonstrated that the overall toxicity was reduced compared with parent SMZ. This catalyst maintained 92% photocatalytic oxidation performance after five cyclic experiments and displayed a co-photodegradation ability to others antibiotics (e.g., roxithromycin, ciprofloxacin et al.) in effluent water. Therefore, this work provides a facile photosensitized strategy for developing guest-host photocatalysts, which enabling the simultaneous antibiotics removal and effectively reduce the ecological risks in wastewater.

Green, HF-Free Synthesis of MXene Quantum Dots and their Photocatalytic Activity for Hydrogen Evolution

A general methodology to prepare MXene quantum dots (MxQDs) with yields over 20% by liquid-phase laser ablation of the MAX phase is reported. Mechanical and thermal shock by 532 nm laser pulses (7 ns fwhp, 50 mJ × pulse^-1 , 1 Hz pulse frequency) produces MAX etching and exfoliation to form MXene QDs, avoiding the use of HF. The process can be followed by absorption and emission spectroscopy and by dynamic laser scattering and it appears to be general, being applied to Ti₃ AlC₂ , Ti₂ AlC, Nb₂ AlC, and V₂ AlC MAX phases. Density functional theory calculations indicate that, depending on the surface terminal groups, the diminution of the MXene size to the nanometric scale makes it possible to control the band gap of the MXene. The photocatalytic activity of these MXene QDs for hydrogen evolution has been observed, reaching an H₂ production for the most efficient Ti₃ C₂ QDs as high as 2.02 mmol × g^-1 × h^-1 .

Two-dimensional Ti3C2 MXene-derived Ti3C2-Ti2C-TiO2 materials for improved diclofenac sodium adsorption performance

This paper aims to prepare an adsorbent based on MXene material for adsorbing diclofenac sodium (DCF). In this paper, Ti₃C₂-MXene was prepared by etching Ti₃AlC₂ with hydrofluoric acid (HF). Ti₃C₂ was subjected to a convenient and simple solvothermal treatment. TiO₂ and Ti₂C were formed during the solvothermal process. According to the results of FT-IR and XRD, the formation of TiO₂ and Ti₂C will increase the interlayer spacing of the prepared Ti₃C₂-12 h, thereby improving the adsorption performance of MXenes. The main factors affecting the adsorbent, the maximum adsorption capacity, and the interaction between the two factors were analyzed by single-factor experiment, orthogonal experiment, and response surface analysis. The maximum DCF adsorption capacities of Ti₃C₂ and Ti₃C₂-12 h are 201 mg/g and 395 mg/g, respectively. MXene made from HF can absorb DCF under various pH conditions and maintain a high adsorption rate, which has important applications in environmental protection.