Heavy metal phytoremediation potential of the roadside forage Chloris barbata Sw. (swollen windmill grass) and the risk assessment of the forage-cattle-human food system

Response patterns of the microbiome during hexavalent chromium remediation by Tagetes erecta L

Chromium pollution, particularly hexavalent chromium [Cr(VI)], may threaten the environment and human health. This study investigated the potential of Tagetes erecta L. (Aztec marigold) for phytoremediation of soil contaminated with Cr(VI), and focused on the effects of varying concentrations of Cr(VI) on both the physicochemical properties of soil and microbiome of Tagetes erecta L. We observed that Tagetes erecta L. showed tolerance to Cr(VI) stress and maintained normal growth under these conditions, as indicated by bioconcentration factors of 0.33-0.53 in shoots and 0.39-0.70 in roots. Meanwhile, the structure and diversity of bacterial communities were significantly affected by Cr(VI) pollution. Specifically, Cr(VI) had a more significant effect on the microbial community structure in the endophytic of Tagetes erecta L. than in the rhizosphere (p < 0.05). The genera Devosia and Methylobacillus were positively correlated with Cr(VI) concentrations. Biomarkers such as Bacilli and Pseudonocardia were identified under the different Cr(VI)-contaminated treatments using LEfSe. In addition, the interaction and stability of the endophytic microbiome were enhanced under Cr(VI) stress. This study explored the interactions between heavy metals, microorganisms, and plants, providing valuable insights for developing in situ bioremediation of Cr(VI)-contaminated soils.

Enzymes Involved in Antioxidant and Detoxification Processes Present Changes in the Expression Levels of Their Coding Genes under the Stress Caused by the Presence of Antimony in Tomato

Currently, there is an increasing presence of heavy metals and metalloids in soils and water due to anthropogenic activities. However, the biggest problem caused by this increase is the difficulty in recycling these elements and their high permanence in soils. There are plants with great capacity to assimilate these elements or make them less accessible to other organisms. We analyzed the behavior of Solanum lycopersicum L., a crop with great agronomic interest, under the stress caused by antimony (Sb). We evaluated the antioxidant response throughout different exposure times to the metalloid. Our results showed that the enzymes involved in the AsA-GSH cycle show changes in their expression level under the stress caused by Sb but could not find a relationship between the NITROSOGLUTATHIONE REDUCTASE (GSNOR) expression data and nitric oxide (NO) content in tomato roots exposed to Sb. We hypothesize that a better understanding of how these enzymes work could be key to develop more tolerant varieties to this kind of abiotic stress and could explain a greater or lesser phytoremediation capacity. Moreover, we deepened our knowledge about Glutathione S-transferase (GST) and Glutathione Reductase (GR) due to their involvement in the elimination of the xenobiotic component.

'Remediability Score' as a tool for selecting the most suitable remediation technology for contaminated sites

Land gets contaminated due to different human activities like illegal industrial discharges, mining activities, and spillage of chemicals. The pollutants released through these activities can have prolonged effects on the environment and human health. Therefore, there is a need for immediate remediation of the contaminated site. Different remediation technologies are available for remediating a land contaminated with a particular contaminant. Selection of the most appropriate remediation technology among all those available would help in quick and efficient remediation of the land. There are multiple factors deciding the appropriateness of a technology for a given case. 'Remediability' is a term introduced in the scientific literature recently to describe the ease with which a contaminated land can be remediated and 'Remediability Score (RS)' quantifies remediability in a 0-100 scale. The higher the value of RS, the greater is the difficulty for remediation. The factors influencing remediability were presented before a group of experts in a Delphi process for assigning comparative importance. From the importance score obtained in a Saaty scale of 1 to 9, the weights of factors were calculated using Fuzzy AHP. The overall RS was calculated by taking the weighted impact of the factors after their magnitudes were normalized. RS for the various remediation technologies feasible for a contaminated site, Kuzhikandam, near Kochi, Kerala was calculated. The site was revealed to be contaminated with heavy metals and organic compounds in a field investigation. The most suitable technology for remediating the selected site was found to be vitrification with an RS of 22. The next best technology, stabilization/solidification, had an RS of 25. The study showed that RS can be a reliable matric for selecting the most suitable remediation technology for a contaminated site.

Characterization and source apportionment of microplastics in Indian composts

Microplastics (MP), small plastic particles under 5 mm, are pollutants known to carry heavy metals in ecosystems. Composts are a significant source of soil microplastics. This study examined MSW composts from Kochi and Kozhikode in India for microplastic concentrations and heavy metals' accumulation thereon. Microplastics were isolated using zinc chloride density separation, with Fenton's reagent used for organic matter oxidation. Resin types were identified using FTIR analysis that showed the presence of PE, PP, PS, nylon, PET, and allyl alcohol copolymer. In Kozhikode's compost, the average concentration of microplastics was 840 ± 30 items/kg, while Kochi had 1600 ± 111 items/kg, mainly polyethylene films. PE was the most prevalent resin, comprising 58.3% in Kozhikode and 73.37% in Kochi. Heavy metal analysis of MP showed significant concentrations of lead, cadmium, zinc, copper, and manganese adsorbed on the surface of microplastics. The concentrations of heavy metals in the MP before Fenton oxidation ranged from 1.02 to 2.02 times the corresponding concentrations in compost for Kozhikode and 1.23 to 2.85 times for Kochi. Source apportionment studies revealed that 64% of microplastics in Kozhikode and 77% in Kochi originated from single-use plastics. Ecological risk indices, PLI and PHI, showed that composts from both locations fall under hazard level V. The study revealed that compost from unsegregated MSW can act as a significant source of microplastics and heavy metals in the soil environment, with single-use plastics contributing major share of the issue.

Combined forage grass-microbial for remediation of strontium-contaminated soil

Enrichment plants were screened from six forage grasses in this study to establish a complete combined forage grass-microbial remediation system of strontium-contaminated soil, and microbial groups were added to the screened dominant forage grasses. The occurrence states of strontium in forage grasses were explored by the BCR sequential extraction method. The results showed that the annual removal rate of Sudan grass (Sorghum sudanense (Piper) Stapf.) reached 23.05% in soil with a strontium concentration of 500 mg·kg^-1. Three dominant microbial groups: E, G and H, have shown good facilitation effects in co-remediation with Sudan grass and Gaodan grass (Sorghum bicolor × sudanense), respectively. When compared to the control, the strontium accumulation of forage grasses in kg of soil with microbial groups was increased by 0.5-4 fold. The optimal forage grass-microbial combination can theoretically repair contaminated soil in three years. The microbial group E was found to promote the transfer of the exchangeable state and the reducible state of strontium to the overground part of the forage grass. Metagenomic sequencing results showed that the addition of microbial groups increased Bacillus spp. in rhizosphere soil, enhanced the disease resistance and tolerance of forage grasses, and improved the remediation ability of forage grass-microbial combinations.

Biological and green remediation of heavy metal contaminated water and soils: A state-of-the-art review

Contamination of the natural ecosystem by heavy metals, organic pollutants, and hazardous waste severely impacts on health and survival of humans, animals, plants, and microorganisms. Diverse chemical and physical treatments are employed in many countries, however, the acceptance of these treatments are usually poor because of taking longer time, high cost, and ineffectiveness in contaminated areas with a very high level of metal contents. Bioremediation is an eco-friendly and efficient method of reclaiming contaminated soils and waters with heavy metals through biological mechanisms using potential microorganisms and plant species. Considering the high efficacy, low cost, and abundant availability of biological materials, particularly bacteria, algae, yeasts, and fungi, either in natural or genetically engineered (GE) form, bioremediation is receiving high attention for heavy metal removal. This report comprehensively reviews and critically discusses the biological and green remediation tactics, contemporary technological advances, and their principal applications either in-situ or ex-situ for the remediation of heavy metal contamination in soil and water. A modified PRISMA review protocol is adapted to critically assess the existing research gaps in heavy metals remediation using green and biological drivers. This study pioneers a schematic illustration of the underlying mechanisms of heavy metal bioremediation. Precisely, it pinpoints the research bottleneck during its real-world application as a low-cost and sustainable technology.

A critical review on the phytoremediation of heavy metals from environment: Performance and challenges

Phytoremediation is an effective, green and economical technique. Different types of phytoremediation methods can be used for the reduction of heavy metal contaminations, such as phytoextraction, phytovolatilization, phytostabilization and phytofiltration. The biomass of plants and the bioavailability of heavy metals in soil are the key factors affecting the efficiency of phytoremediation. It's worth noting that the low remediation efficiency and the lack of effective disposal methods for contaminated biomass have limited its development and application. At present, biological, physical, chemical, agronomic and genetic approaches have been used to enhance phytoremediation. Disposal methods of contaminated biomass usually include pyrolysis, incineration, composting and compaction. They are effective, but are costly and have security problems. Improper disposal of contaminated biomass can lead to leaching of heavy metals. The leaching possibility of different forms of heavy metal in plants is different. Hence, it has great significance to explore the different forms of heavy metals in plants which can help to explore appropriate disposal methods. According to the challenges of phytoremediation, we put forward some views and recommendations for the sustainable and rapid development of phytoremediation technology.

Monitoring Potentially Toxic Element Pollution in Three Wheat-Grown Areas with a Long History of Industrial Activity and Assessment of Their Effect on Human Health in Central Greece

Agricultural lands, especially those where wheat is cultivated, in the vicinity of intense anthropogenic activities may be laden with potentially toxic elements (PTEs), resulting in increased risk for human health. In this study we monitored three regions located in central Greece, currently cultivated with wheat: Domokos and Eretria, two areas with abandoned chromium mines, but never studied before, and the industrial area of Volos, near a major steel factory. All soils were alkaline with medium CaCO₃ content. As expected, Cr was extremely high in the first two areas (705.2 in Eretria and 777.5 mg kg⁻¹ in Domokos); Ni was also found elevated (1227 in Eretria, 1315 in Domokos and 257.6 mg kg⁻¹ in the steel factory), while other harmful metals (Cd, Cu, Pb and Zn) were rather low. As a result, pollution load index, a cumulative index showing the contamination level of an area, was higher than 1.0 in all three areas (Eretria = 2.20, Domokos = 2.28, and steel factory = 1.61), indicating high contamination and anthropogenic inputs. As for the wheat parts (shoots and grains), they were found to have no elevated concentrations of any of the measured metals in all three study areas, probably due to the alkaline soil pH that decelerates metal mobility. This was also confirmed by the very low soil-to-plant transfer coefficient values for all metals. In assessing the possible risk concerning human health, we found that the soil-to-human pathway would induce no significant risk (exhibited by hazard index of less than 1.0), while the risk from grain-to-human resulted in considerable risk for human health in the steel factory of Volos (where HI > 1.0). Our findings suggest that rural areas never studied before with a history in some offensive anthropogenic activity can prove to be a contamination hotspot; we regard this study as a pivotal for similarly never-visited-before areas casually cultivated with wheat (or other important crops for human nutrition). We further recognize the need for a more in-depth study that would acknowledge the geochemical speciation of the studied metals and also monitor other important crops and their possible uptake of PTEs.