Environmental and economic analysis of bioethanol production from sugarcane molasses and agave juice

Investigation of the influence of Candida tropicalis on bioethanol production using sugarcane bagasse: stochastic and in silico analysis

This study investigated the impact of Candida tropicalis NITCSK13 on sugarcane bagasse (SCB) consolidated bioprocessing (CSB) using various parameters, such as pH, steam explosion (STEX) pretreatment, and temperature (at two different temperatures, cellulose hydrolysis and ethanol fermentation). The backpropagation neural network (BPNN) method simulated the optimal CSB conditions, achieving a maximum ethanol yield of 44 ± 0.32 g/L (0.443 g of ethanol/g of SCB) from STEX pretreated SCB within 48 h at 55 °C for cellulose hydrolysis and 33 °C for ethanol fermentation and pH 3.5. The simulated conditions were experimentally validated and showed an R2 value of 0.998 and absolute average deviation (AAD) of 1.23%. The strain NITCSK13 also exhibited a high ethanol tolerance of 16% (v/v). The interactions between the inhibitors, cellobiose, furfural, and thermocellulase were assessed through molecular docking. The results revealed a maximum inhibitory constant of 3.7 mM for furfural against the endoglucanase (EnG) of Humicola insolens (2ENG) at 50 °C. Acremonium chrysogenum endoglucanase (5M2D) exhibited a maximum of 88.7 µM for cellobiose at 50 °C. The SWISS homology model of EnG from Candida viswanathii exhibited inhibitory effects similar to those of EnG from Thermoascus and Thermotoga, indicating that the moderately thermophilic yeast Candida sp. cellulase may be capable of efficiently tolerating inhibitors and could be a promising candidate for consolidated bioprocessing of cellulosic ethanol.

Life cycle environmental benefits of recycling waste liquor and chemicals in production of lignocellulosic bioethanol

In recent decades, numerous bioconversion processes and techniques have been developed to utilize lignocellulosic biomass as feedstock in the production of bio-based fuels and materials. However, waste treatment, an important sub-system, is seldom considered in the life cycle assessment of lignocellulose derived products. This study comprehensively investigated the environmental impacts of bioethanol and electricity cogeneration from sugarcane bagasse, with a focus on recycling techniques adopted in waste treatment. A life cycle assessment indicated that high recycle rate of black liquor, acid and waste washing water can substantially reduce the consumption of fresh water, related chemicals and energy by 70-80%. Environmental impacts relating to global warming, acidification potential and primary energy demand can be decreased by 5-10 times or even entirely eliminated. These study outcomes demonstrate significant environmental benefits of integrating waste recycling techniques into lignocellulose biorefinery process, providing a solid foundation for future industrial development.

Metabolic engineering of Thermoanaerobacterium aotearoense strain SCUT27 for biofuels production from sucrose and molasses

BACKGROUND

Sucrose-rich sugarcane trash surpasses 28 million tons globally per year. Effective biorefinery systems could convert these biomasses to bioproducts, such as bioethanol from sugarcane sucrose in Brazil. Thermophilic microbes for biofuels have attracted great attention due to their higher fermentation temperature and wide substrate spectrum. However, few thermophiles using sucrose or molasses for biofuels production was reported. Thermoanaerobacterium aotearoense SCUT27 has been considered as an efficient ethanol producer, but it cannot directly utilize sucrose. In this study, various sucrose metabolic pathways were introduced and analyzed in Thermoanaerobaterium.

RESULTS

The sucrose-6-phosphate hydrolase (scrB), which was from a screened strain Thermoanaerobacterium thermosaccharolyticum G3-1 was overexpressed in T. aotearoense SCUT27 and endowed this strain with the ability to utilize sucrose. In addition, overexpression of the sucrose-specific PTS system (scrA) from Clostridium acetobutylicum accelerated the sucrose transport. To strengthen the alcohols production and substrates metabolism, the redox-sensing transcriptional repressor (rex) in T. aotearoense was further knocked out. Moreover, with the gene arginine repressor (argR) deleted, the ethanologenic mutant P8S10 showed great inhibitors-tolerance and finally accumulated ~ 34 g/L ethanol (a yield of 0.39 g/g sugars) from pretreated cane molasses in 5 L tank by fed-batch fermentation. When introducing butanol synthetic pathway, 3.22 g/L butanol was produced by P8SB4 with a yield of 0.44 g alcohols/g sugars at 50℃. This study demonstrated the potential application of T. aotearoense SCUT27 for ethanol and butanol production from low cost cane molasses.

CONCLUSIONS

Our work provided strategies for sucrose utilization in thermophiles and improved biofuels production as well as stress tolerances of T. aotearoense SCUT27, demonstrating the potential application of the strain for cost-effective biofuels production from sucrose-based feedstocks.

Advances in the Micropropagation and Genetic Transformation of Agave Species

The Agave genus is composed of approximately 210 species distributed from south United States to Colombia and Venezuela. Numerous Agave species have been used for the preparation of alcoholic beverages and have attracted interest in the pharmaceutical and food industry. Despite their economic importance, there are few initiatives for the improvement and selection of characteristics of interest. This is mainly due to its morphology, long lifecycles, and monocarpic nature. Micropropagation is a feasible alternative to the improvement of Agave species. It has been used for multiple purposes, including massive propagation, induction of somaclonal variation to enhance agronomic characteristics of interest, maintenance of specific genotypes, and genetic transformation using molecular techniques. In this report, we summarize the most outstanding findings regarding the micropropagation of Agave species mediated by multiple regeneration responses. We also describe the media and growth regulators for each of the previously described methods. In addition, we discuss how micropropagation has allowed the development of transformation protocols. Exploitation of this technology may be a feasible strategy to introduce genes and improve certain traits. Genetic transformation also offers an opportunity for studying molecular mechanisms. This represents advantages for optimizing production in the field and for implementing breeding programs.