A comprehensive review of dye-sensitized solar cell optimal fabrication conditions, natural dye selection, and application-based future perspectives

The Role of Spin-Orbit Coupling in the Linear Absorption Spectrum and Intersystem Crossing Rate Coefficients of Ruthenium Polypyridyl Dyes

The successful use of molecular dyes for solar energy conversion requires efficient charge injection, which in turn requires the formation of states with sufficiently long lifetimes (e.g., triplets). The molecular structure elements that confer this property can be found empirically, however computational predictions using ab initio electronic structure methods are invaluable to identify structure-property relations for dye sensitizers. The primary challenge for simulations to elucidate the electronic and nuclear origins of these properties is a spin-orbit interaction which drives transitions between electronic states. In this work, we present a computational analysis of the spin-orbit corrected linear absorption cross sections and intersystem crossing rate coefficients for a derivative set of phosphonated tris(2,2'-bipyridine)ruthenium(2+) dye molecules. After sampling the ground state vibrational distributions, the predicted linear absorption cross sections indicate that the mixture between singlet and triplet states plays a crucial role in defining the line shape of the metal-to-ligand charge transfer bands in these derivatives. Additionally, an analysis of the intersystem crossing rate coefficients suggests that transitions from the singlet into the triplet manifolds are ultrafast with rate coefficients on the order of 1013 s-1 for each dye molecule.

Graphene oxide doping in tropical almond (terminalia catappa L.) fruits extract mediated green synthesis of TiO2 nanoparticles for improved DSSC power conversion efficiency

The power conversion efficiency (PCE) of a dye-sensitized solar cell (DSSC) device depends on its semiconductor characteristics. Titanium dioxide (TiO2) nanoparticles are a semiconductor material commonly used in the DSSC device whose characteristics depend on the synthesis process. There are many routes to synthesize TiO2, however, they typically involve hazardous approaches, which may cause risk to the environment. Green synthesis is an environmentally friendly alternative method using ecological solvents that eliminates toxic waste and reduces energy consumption. In this work, tropical almond (Terminalia catappa L.) was used as a natural capping agent in the green synthesis to control the growth of TiO2. In addition, graphene oxide (GO) was used as a dopant to increase the performance of DSSC device. The results are convincing, in which the addition of 0.0017 % GO doping in tropical almond extract mediated green synthesis of TiO2 improved the PCE from 0.85 % to 1.72 %. These results suggest that GO-modified TiO2 nanoparticles green synthesized using tropical almond extract have great potential in the fabrication of DSSC devices with good PCE, low cost, and low environmental impact.

Fully Additively Manufactured Counter Electrodes for Dye-Sensitized Solar Cells

In dye-sensitized solar cells (DSSCs), the counter electrode (CE) plays a crucial role as an electron transfer agent and regenerator of the redox couple. Unlike conventional CEs that are generally made of glass-based substrates (e.g., FTO/glass), polymer substrates appear to be emerging candidates, owing to their intrinsic properties of lightweight, high durability, and low cost. Despite great promise, current manufacturing methods of CEs on polymeric substrates suffer from serious limitations, including low conductivity, scalability, process complexity, and the need for dedicated vacuum equipment. In the present study, we employ and evaluate a fully additive manufacturing route that can enable the fabrication of CEs for DSSCs in a high-throughput and eco-friendly manner with improved performance. The proposed approach sequentially comprises: (1) material extrusion 3-D printing of polymer substrate; (2) conductive surface metallization through cold spray particle deposition; and (3) over-coating of a thin-layer catalyzer with a graphite pencil. The fabricated electrodes are characterized in terms of microstructure, electrical conductivity, and photo-conversion efficiency. Owing to its promising electrical conductivity (8.5 × 104 S·m-1) and micro-rough surface structure (Ra ≈ 6.32 µm), the DSSCs with the additively manufactured CEs led to ≈2.5-times-higher photo-conversion efficiency than that of traditional CEs made of FTO/glass. The results of the study suggest that the proposed additive manufacturing approach can advance the field of DSSCs by addressing the limitations of conventional CE manufacturing platforms.

Investigating the energy-saving potential of using thermochromic coatings on opaque and transparent elements of educational buildings

Buildings consume about 40% of global energy. It is essential to use various measures to reduce the energy consumption of the buildings as much as possible. This research investigates the impact of using a new combination of thermochromic (TC) materials in the building envelope of educational buildings. A case study building at Razi University was selected, and a 3D model was created in DesignBuilder software. Firstly, TC coating for external walls was entered into the base model, and several simulations were performed to find the effect of this coating on the energy consumption of the building. Then, a low-emissivity thermochromic (LETC) window was defined using energy management system (EMS) scripting and was entered into the base model. Finally, these two measures were combined, and the cumulative effect of using both TC coating on the external walls and LETC window was identified. Results indicated that the simultaneous application of these two measures reduced the heating demand of the building more in Tabriz, with the least cooling degree days (CDD). Also, simulation results revealed that the simultaneous use of these measures decreased the cooling demand of the building more in Bandar Abbas, with the highest CDD. Using TC coating on the external walls and LETC windows together reduced the energy consumption of the building more in Bandar Abbas. Consequently, integrating these measures can reduce the heating demand of educational buildings more in heating-dominated climates. Also, the simultaneous use of these measures can reduce cooling demand more in cooling-dominated climates.

Construction and characterization of organic photovoltaic cells sensitized by Chrysanthemum based natural dye

In this work, natural dyes from three different species of the same flower family (Chrysanthemum), which containing anthocyanin were extracted and properly prepared to be used as photosensitizers in DSSCs construction. The cells were fabricated with titanium dioxide nanoparticles (TiO₂) for the photoanodes, whereas platinum electrodes were used for the photocathodes. To understand the behavior of light absorption in addition to the coloring components present in the dyes and the molecular functional groups present in the samples, the UV-Vis absorption spectroscopy and FTIR spectroscopy were used respectively. The performance and efficiency of solar cells were evaluated to establish the photovoltaic criteria for each DSSC built. Through electrochemical characterizations, it was possible to notice that the highest photovoltaic conversion efficiency was obtained with the Chrysanthemum Violet (CV) cell, with efficiency (η) of 1.348%, compared to 1.229% and 0.485% for the Chrysanthemum Green (CG) and Chrysanthemum Blue (CB) cells, respectively. The CV cell also has the highest open circuit voltage (V_OC) at 0.58 V. The results corroborate to present the organic solar cells as a viable option for the electric energy generation.

Efficient dye-sensitized solar cell fabricated using a less toxic alternative to electrolyte and charge collector

The photovoltaic investigation of novel and efficient dye-sensitized solar cells is discussed in this paper. Ruthenium-based synthetic dye (N3) is used as a sensitizer. A less toxic alternative is suggested for toxic indium-based glass substrates by using aluminum-doped zinc oxide (AZO) and fluorine-doped tin oxide (FTO) as charge collectors. Moreover, the electrolyte used is a mixture of polymer (polyaniline) and an iodide-triiodide couple to go for the approach involving a lower amount of iodine. In the paper study, on the extent of light, absorption of dye is done by ultraviolet-visible (UV-vis) spectroscopy. The morphological study of sheets is done using scanning electron microscopic (SEM) images to understand the binding of titania on photoanode. Photovoltaic characteristics (I-V) and induced photon to current efficiency (IPCE) measurements, and light harvesting efficiency (LHE) are also investigated. The highest power conversion efficiency of 6.18% is observed in the suggested fabricated green solar cell. Hence, more efficient, indium-free, and novel cell is fabricated by the usage of different charge collector substrates and quasi solid-state electrolytes.

Photofunctions in Hybrid Systems of Schiff Base Metal Complexes and Metal or Semiconductor (Nano)Materials

Composite materials very often provide new catalytic, optical or other physicochemical properties not observed for each component separately. Photofunctions in hybrid systems are an interesting topic of great importance for industry. This review presents the recent advances, trends and possible applications of photofunctions of hybrid systems composed of Schiff base metal complexes and metal or semiconductor (nano)materials. We focus on photocatalysis, sensitization in solar cells (DSSC-dye sensitized solar cell), ligand-induced chirality and applications in environmental protection for Cr(VI) to Cr(III) reduction, in cosmetology as sunscreens, in real-time visualization of cellular processes, in bio-labeling, and in light activated prodrug applications.

A Novel Dye-Sensitized Solar Cell Structure Based on Metal Photoanode without FTO/ITO

Traditional dye-sensitized solar cells (DSSC) use FTO/ITO containing expensive rare elements as electrodes, which are difficult to meet the requirements of flexibility. A new type of flexible DSSC structure with all-metal electrodes without rare elements is proposed in this paper. Firstly, a light-receiving layer was prepared outside the metal photoanode with small holes to realize the continuous oxidation-reduction reaction in the electrolyte; Secondly, the processing technology of the porous titanium dioxide (TiO₂) film was analyzed. By testing the J–V characteristics, it was found that the performance is better when the heating rate is slow. Finally, the effects of different electrode material combinations were compared through experiments. Our results imply that in the case of all stainless-steel electrodes, the open-circuit voltage can reach 0.73 V, and in the case of a titanium photoanode, the photoelectric conversion efficiency can reach 3.86%.