Adsorption of antibiotic cefazolin in organoclay fixed-bed column: characterization, mathematical modeling, and DFT-based calculations

Enhanced degradation and removal of ciprofloxacin and ofloxacin through advanced oxidation and adsorption processes using environmentally friendly modified carbon nanotubes

This study explores the utilization of adsorption and advanced oxidation processes for the degradation of ofloxacin (OFL) and ciprofloxacin (CIP) using a green functionalized carbon nanotube (MWCNT-OH/COOH-E) as adsorbent and catalyst material. The stability and catalytic activity of the solid material were proved by FT-IR and TG/DTG, which also helped to elucidate the reaction mechanisms. In adsorption kinetic studies, both antibiotics showed similar behavior, with an equilibrium at 30 min and 60% removal. The adsorption kinetic data of both antibiotics were well described by the pseudo-first-order (PFO) model. Different advanced oxidation processes (AOPs) were used, and the photolytic degradation was not satisfactory, whereas heterogeneous photocatalysis showed high degradation (⁓ 70%), both processes with 30 min of reaction. Nevertheless, ozonation and catalytic ozonation have resulted in the highest efficiencies, 90%, and 70%, respectively, after 30-min reaction. For AOP data modeling, the first-order model better described CIP and OFL in photocatalytic and ozonation process. Intermediates were detected by MS-MS analysis, such as P313, P330, and P277 for ciprofloxacin and P391 and P332 for ofloxacin. The toxicity test demonstrated that a lower acute toxicity was observed for the photocatalysis method samples, with only 3.1 and 1.5 TU for CIP and OFL, respectively, thus being a promising method for its degradation, due to its lower risk of inducing the proliferation of bacterial resistance in an aquatic environment. Ultimately, the analysis of MWCNT reusability showed good performance for 2 cycles and regeneration of MWCNT with ozone confirmed its effectiveness up to 3 cycles.

Adsorption of cefazolin on organoclay: experimental design, characterization, and a complete batch study

Cefazolin (CFZ) is a ubiquitous antibiotic in hospital settings and has been recognized as an emerging contaminant due to its ecotoxicity. Despite the growing concern around this compound, the literature addressing feasible advanced techniques for CFZ uptake from aqueous matrices is still scarce. Thus, the objective of this work was to evaluate the adsorption of cefazolin on Spectrogel® organoclay in a batch system as an efficient remediation method. The optimization of experimental conditions was determined by a central composite rotational design. A pH study, as well as equilibrium, kinetic, and thermodynamic assays, was performed to assess the adsorption of CFZ on Spectrogel®. The kinetic and equilibrium models that best described the system were the external mass transfer resistance and Sips models, respectively. A removal efficiency above 80% was achieved, and the maximum adsorption capacity at 25 °C was 398.6 mg g^-1. The post-process contaminated organoclay was thermally regenerated. The outcomes of this work indicate that Spectrogel® is an environmentally friendly adsorbent for the removal of cefazolin from wastewater.