Photocatalytic reactor design and its application in real wastewater treatment using TiO2 coated on the stainless-steel mesh

Ce-doped TiO2-zeolite fibers: visible light-driven photocatalysts for indigo dye degradation

Indigo dye is a poisonous dye that threatens human health by polluting the environment. Therefore, we prepared a visible light-sensitive photocatalyst to eliminate indigo dye especially from water sources. In this study, sol-gel and electrospinning methods have been performed to synthesize Ce-doped TiO2-zeolite fibers for indigo degradation. The structural and optical properties of the synthesized fibers were investigated by XRD, SEM, EDX, and UV-Vis spectrophotometer techniques. It has been shown that 3% Ce-doped TiO2/zeolite fibers have the highest photocatalytic activity with 100% degradation after 150 h, showing that the light absorption of TiO2 expands into the visible light area by Ce doping and absorption into the zeolite. The recyclability analyses of the spent photocatalyst exhibited 87.0% degradation of indigo after four cycles, demonstrating the stability of the fiber. An effective photocatalyst has been obtained by improving the photocatalytic and electrochemical properties thanks to the fibers' high surface area and the zeolite's porous structure. Based on these findings, the study reveals the significant potential of Ce-doped TiO2/zeolite fibers for the purification of wastewater under visible light.

Efficient One-Pot Synthesis of TiO2/ZrO2/SiO2 Ternary Nanocomposites Using Prunus × Yedoensis Leaf Extract for Enhanced Photocatalytic Dye Degradation

A simple, efficient, and ecofriendly method was employed to synthesize TiO2/ZrO2/SiO2 ternary nanocomposites using Prunus × yedoensis leaf extract (PYLE) that shows improved photocatalytic and antibacterial properties. The characterization of the obtained nanocomposites was done by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, field-emission scanning electron microscopy (FE-SEM), and energy-dispersive X-ray spectroscopic (EDS) analysis. The synthesized ternary nanocomposites with nanoscale pore diameters were investigated for the elimination of Reactive Red 120 (RR120) dye. The obtained results showed about 96.2% removal of RR120 dye from aqueous solution under sunlight irradiation. Furthermore, it shows promising antibacterial activity against Staphylococcus aureus and Escherichia coli. The improved photocatalytic and antibacterial activity of TiO2/ZrO2/SiO2 may bring unique insights into the production of ternary nanocomposites and their applications in the environment and biomedical field.

Dye decomposition and air de-pollution performance of TiO2/SiO2 and N-TiO2/SiO2 photocatalysts coated on Portland cement mortar substates

In this study, the newly synthesized TiO₂ and N doped TiO₂ clusters were added to silica sol to synthesize N-TiO₂/SiO₂ composites via the sol-gel method. Afterwards, the prepared sols were applied by brushing on portland cement. Doping with nitrogen significantly increased the absorption of TiO₂ towards the visible region, thus, increasing the photocatalytic activity. SEM characterization of the treated samples showed that the clusters were distributed in form of aggregates on the samples' surface. The self-cleaning and air de-polluting performances were assessed through methylene blue degradation and the oxidation of nitrogen oxide, resulting in methylene blue (MB) removal of 85% and 78% after 60 min of irradiation for SN10TiO₂ and STiO₂, respectively. Regarding air de-pollution performance, the newly synthesized photocatalysts showed the ability of NOx reduction. However, their efficiency was somewhat lower, in which 23.81% of NO has been oxidized by the sample SN10TiO₂, while SP25 showed a total NO conversion of 38.98%. The powdered xerogels of the newly synthesized nanoparticles revealed high photocatalytic efficiency concerning NO oxidation, resulting in a higher performance compared to those obtained by the xerogel containing P25.