Easy-handling semi-floating TiO2-based aerogel for solar photocatalytic water depollution

Establishing an affordable solar-floating Fe2O3@A1-xRx-TiO2 photo-Fenton catalytic system through the cyclic utilization of iron waste to de-pollute textile water contamination

This study focuses on developing a cost-effective Fe2O3 catalyst from oilfield iron waste to create a floating heterogeneous photo-Fenton system with anatase/rutile(A/R) TiO2 heterophase photocatalyst (cork-Fe2O3@A1-xRx-TiO2) for treating textile pollution in sunlight. Through controlling sol-gel (SG) microwave heating technique, the A/R ratio of A1-xRx-TiO2 crystal is tuned (A/R ratio = 1.13 and Eg = 3.02 eV) to improve adsorption-photocatalytic removal of anionic/cationic dyes with an apparent kinetic rate (kapp) of 0.0074 min-1 under UV-visible irradiation. The developed cork-Fe2O3@A53.1R46.8-TiO2 floated system also outperforms the classical photo-Fenton with Fe/H2O2 benchmark, showing a 2-fold enhancement in textile dye degradation (kapp = 0.216 min-1 and space-time yield (SY) of 1.7*10-4 mol/E.g at pH 5.65) with high stability over four reuse cycles. The formation of Fe2O3@A53.1R46.8-TiO2 Type-II heterojunction is confirmed by optical and electrochemical analyses, allowing the acceleration of direct electron transfer mechanism and oxidative degradation of dyes during photo-Fenton reaction. As a case study, the cork-Fe2O3@A53.1R46.8-TiO2 system demonstrates a high capability for efficient mineralization of textile pollution in a real effluent, achieving 82 ± 2% reduction in the total organic contents at an operational cost of 2.61 $/kg.m3 in sunlight. Thus, this research addresses challenges in conventional Fenton chemistry, iron waste recycling, and catalyst retention, offering new insights for sustainable treatment of textile effluents and environmental protection.

Graphitic carbon nitride-adorned PDMS self-cleaning floating photocatalyst for simultaneous removal of Rhodamine B, Crystal Violet and Malachite Green from a ternary dye mixture

Graphitic carbon nitride-adorned polydimethylsiloxane (PDMS) floating catalyst was prepared by a simple procedure. The prepared catalyst was utilized for the simultaneous mitigation of recalcitrant organic pollutants such as Rhodamine B, Crystal Violet and Malachite Green from their ternary mixture for the first time. Derivative spectroscopic method was used to calculate the degradation efficiencies of individual dyes in the mixture. The prepared catalyst showed a consistent degradation performance up to 4 cycles inducing a degradation of 94.02%, 92.1% and 97.13% of Rhodamine B, Crystal Violet and Malachite Green, respectively, in a dye(s) solution with a catalytic loading of 0.5 g L-1. A kinetic analysis of the dye(s) degradation under visible light was carried out during the course of this work up to 120 min. A detailed characterization of the surface of this novel catalyst was carried out in this study by SEM, EDX, XRD, DRS, DTG, FTIR, Raman spectroscopy and UV-Vis spectroscopy and provided the experimental proof for the catalyst presenting high hydrophobicity, self-cleaning ability, good recyclability and high chemical stability.

pH-Driven Selective Adsorption of Multi-Dyes Solutions by Loofah Sponge and Polyaniline-Modified Loofah Sponge

In the last decades, sorbent materials characterized by low selectivity have been developed for the removal of pollutants (in particular dyes) from wastewater. However, following the circular economy perspective, the possibility to selectively adsorb and desorb dyes molecules today represents an unavoidable challenge deserving to be faced. Herein, we propose a sequential treatment based on the use of PANI-modified loofah (P-LS) and loofah sponge (LS) to selectively adsorb cationic (rhodamine, RHB, and methylene blue, MB) and anionic (methyl orange, MO) dyes mixed in aqueous solution by tuning the adsorption pH (100% MO removal by P-LS and 100% and 70% abatement of MB and RHB, respectively, by LS). The system maintained high sorption activity for five consecutive cycles. A simple and effective regeneration procedure for the spent adsorbents permits the recovery of the initial sorption capability of the materials (81% for MO, ca. 85% for both RHB and MB, respectively) and, at the same time, the selective release of most of the adsorbed cationic dyes (50% of the adsorbed MB and 50% of the adsorbed RHB), although the procedure failed regarding the release of the anionic component. This approach paved the way to overcome the traditional procedure based on an indiscriminate removal/degradation of pollutants, making the industrial wastewater a potential source of useful chemicals.