A review on adsorption of heavy metals from wastewater using carbon nanotube and graphene-based nanomaterials

Developing cellulose-based hydrophobic/hydrophilic composites for efficient adsorption of oils and heavy metals from water

The oily wastewater and heavy metal ions have been increasingly discharged into water environment, posting a serious threat to ecosystems and human health. However, it remains challenging to use single separation technology to effectively remove oil and heavy metal ions in oil-water mixtures simultaneously. Herein, novel hydrophobic/hydrophilic composites (HHC) were successfully prepared by using A4 paper-derived hydrophilic cellulose as the modified matrix, modifying the polydopamine layer and in-situ growth nanoscale zero-valent iron as active adsorption materials, combined with oleic acid-modified hydrophobic magnetic hollow carbon microspheres, which were used to efficiently and rapidly adsorb heavy metals and oil in oil-water mixtures. Under the optimal adsorption conditions, the adsorption amounts of As(III), As(V), Pb(II) and Cu(II) were 289.6 mg/g, 341.9 mg/g, 241.2 mg/g and 277.5 mg/g, respectively, and the mass transfer rate of HHC to the target ions is fast. The HHC have efficient separation performance for layered oil-water mixtures and emulsified oil-water mixtures, with separation efficiency of 97 % and 92 %. At the same time, due to the abundant adsorption sites, the HHC also exhibit splendid regeneration performance for the four ions after multiple adsorption utilization. Our work designed a approach to achieving promising oil and heavy metal adsorbents with higher adsorption capacity and better regenerative properties.

Both nanoplastic and iron mineral types determine their heteroaggregation: Aggregation kinetics and interface process

Nanoplastics (NPs) inevitably interact with iron minerals (IMs) after being released into aquatic environments, changing their transport and fate. In this study, batch heteroaggregation kinetics of four types of NPs, i.e., polymethyl methacrylate (PMMA), polystyrene (PS-Bare), amino-polystyrene (PS-NH2), and carboxyl-polystyrene (PS-COOH), with two different IMs (hematite and magnetite) were conducted. We found that the heteroaggregation of NPs and IMs and the associated interfacial interaction mechanisms are both NPs-dependent and IMs-dependent. Specifically, the NPs had stronger heteroaggregation with hematite than magnetite; the heteroaggregation order of two IMs with NPs was PMMA > PS-NH2 > PS-Bare > PS-COOH. Moreover, hydrogen bond, complexation, hydrophobic, cation-π, and electrostatic interaction were involved in the interfacial reaction between NPs and hematite, and electrons were transferred from the NPs to the hematite, causing the reduction of Fe3+ into Fe2+. Furthermore, we first revealed that both pre-homoaggregation of NPs and IMs could affect their subsequent heteroaggregation, and the homoaggregates of IMs could be interrupted by PMMA or PS-COOH NPs introduction. Therefore, the emerging NPs pollution is likely to generate an ecological effect in terms of elemental cycles such as iron cycle. This work provides new insights into assessing the environmental transfer and ecological effects of NPs in aquatic environments.

A critical and comprehensive review of the current status of 17β-estradiol hormone remediation through adsorption technology

Even at low concentrations, steroid hormones pose a significant threat to ecosystem health and are classified as micropollutants. Among these, 17β-estradiol (molecular formula: C18H24O2; pKa = 10.46; Log Kow = 4.01; solubility in water = 3.90 mg L-1 at 27 °C; molecular weight: 272.4 g mol-1) is extensively studied as an endocrine disruptor due to its release through natural pathways and widespread use in conventional medicine. 17β-estradiol (E2) is emitted by various sources, such as animal and human excretions, hospital and veterinary clinic effluents, and treatment plants. In aquatic biota, it can cause issues ranging from the feminization of males to inhibiting plant growth. This review aims to identify technologies for remediating E2 in water, revealing that materials like graphene oxides, nanocomposites, and carbonaceous materials are commonly used for adsorption. The pH of the medium, especially in acidic to neutral conditions, affects efficiency, and ambient temperature (298 K) supports the process. The Langmuir and Freundlich models aptly describe isothermal studies, with interactions being of a low-energy, physical nature. Adsorption faces limitations when other ions coexist in the solution. Hybrid treatments exhibit high removal efficiency. To mitigate global E2 pollution, establishing national and international standards with detailed guidelines for advanced treatment systems is crucial. Despite significant advancements in optimizing technologies by the scientific community, there remains a considerable gap in their societal application, primarily due to economic and sustainable factors. Therefore, further studies are necessary, including conducting batch experiments with these adsorbents for large-scale treatment along with economic analyses of the production process.

Nano carbon-modified air purification filters for removal and detection of particulate matters from ambient air

Particulate matters (PMs) pose significant risks to human health and the environment, necessitating research to enhance air purification filters and reduce harmful emissions. This study focuses on the preparation of carbon nanomaterials, including graphitic carbon nitride nanosheets (g-C3N4 NSs), reduced graphene oxide (r-GO), and carbon nanotubes (CNT), for modifying filters in air particle monitoring devices. The objective is to investigate the impact of these nanomaterials on enhancing PM adsorption efficiency. Quantitative and qualitative analyses of the modified filters' adsorption efficiency towards PMs are performed using spectroscopic techniques such as Energy-Dispersive X-ray Spectroscopy (EDX), Inductively Coupled Plasma (ICP), and Laser-Induced Breakdown Spectroscopy (LIBS). The results reveal that CNT-modified filters exhibit superior adsorption efficiency compared to the control, g-C3N4, and r-GO-modified filters. The exceptional performance of CNTs is attributed to their large specific surface area and pore volume. Additionally, LIBS demonstrates its capability to detect heavy metals like Cd, which remain undetected by EDX and ICP. The technique proves sensitive for heavy metal monitoring. This novel approach is expected to garner significant attention and contribute to the development of improved air purification technologies.