Microwave-assisted hydrothermal synthesis of cube-like Ag-Ag2MoO4 with visible-light photocatalytic activity

Silver molybdate: an excellent optical limiting material under nanoregime for photonic device application

There is a mounting demand for nonlinear optical materials with superior optical limiting performance which has a noticeable impact on protecting the delicate optical components from laser-induced damage. Transition metal molybdates have garnered attention in the nonlinear optics field due to their outstanding optical and luminescent properties, which give rise to widespread applications in next-generation optoelectronics devices. The structural confirmation of the as prepared silver molybdate nanoparticles were made by XRD and Raman spectroscopy analysis. The linear optical properties and the band gap of the synthesized material were studied using UV-Visible and photoluminescence spectroscopy. SEM analysis revealed the pebble like morphology of the silver molybdate nanostructures. The nonlinear responses of the samples were studied using open aperture z-scan approach with Nd:YAG pulsed laser (532 nm, 9 ns, 10 Hz). The sample exhibits reverse saturable absorption pattern attributed to the two photon absorption (2PA) mechanism. The obtained OL threshold value is in the order of 1012 which is suitable for fabricating optical limiters in nano second pulsed laser regime.

Ag/α-Ag2MoO4/h-MoO3 nanoparticle based microspheres: synthesis and photosensitive properties

We report a new and the most simple strategy for the synthesis of silver molybdate functional composite microspheres based on low molecular weight gelators -amino acids, silver salts and heptamolybdate ions. The resulting material shows a high photocatalytic activity with respect to the methylene blue dye degradation at neutral pH.

Facet-, composition- and wavelength-dependent photocatalysis of Ag2MoO4

Faceted β-Ag2MoO4 microcrystals are prepared by controlled nucleation and growth in diethylene glycol (DEG) or dimethylsulfoxide (DMSO). Both serve as solvents for the liquid-phase synthesis and surface-active agents for the formation of faceted microcrystals. Due to its reducing properties, truncated β-Ag2MoO4@Ag octahedra are obtained in DEG. The synthesis in DMSO allows avoiding the formation of elemental silver and results in β-Ag2MoO4 cubes and cuboctahedra. Due to its band gap of 3.2 eV, photocatalytic activation of β-Ag2MoO4 is only possible under UV-light. To enable β-Ag2MoO4 for absorption of visible light, silver-coated β-Ag2MoO4@Ag and Ag2(Mo0.95Cr0.05)O4 with partial substitution of [MoO4]2- by [CrO4]2- were prepared, too. The photocatalytic activity of all the faceted microcrystals (truncated octahedra, cubes, cuboctahedra) and compositions (β-Ag2MoO4, β-Ag2MoO4@Ag, β-Ag2(Mo0.95Cr0.05)O4) is compared with regard to the photocatalytic decomposition of rhodamine B and the influence of the respective faceting, composition and wavelength.

Unvealing the role of β-Ag2MoO4 microcrystals to the improvement of antibacterial activity

Crystal morphology with different surfaces is important for improving the antibacterial activity of materials. In this experimental and theoretical study, the antibacterial activity of β-Ag₂MoO₄ microcrystals against the Gram-positive bacteria, namely, methicillin-resistant Staphylococcus aureus (MRSA), and the Gram-negative bacteria, namely, Escherichia coli (E. coli), was investigated. In this study, β-Ag₂MoO₄ crystals with different morphologies were synthetized by a simple co-precipitation method using three different solvents. The antimicrobial efficacy of the obtained microcrystals against both bacteria increased according to the solvent used in the following order: water < ammonia < ethanol. Supported by experimental evidence, a correlation between morphology, surface energy, and antibacterial performance was established. By using the theoretical Wulff construction, which was obtained by means of density functional calculations, the morphologies with large exposition of the (001) surface exhibited superior antibacterial activity. This study provides a low cost route for synthesizing β-Ag₂MoO₄ crystals and a guideline for enhancing the biological effect of biocides on pathogenic bacteria by the morphological modulation.

Facile synthesis of new polyhedron-like WO3/butterfly-like Ag2MoO4 p–n junction photocatalysts with higher photocatalytic activity in UV/solar region light

A series of novel efficient polyhedron-like WO₃/butterfly-like Ag₂MoO₄ p–n junction photocatalysts (denoted as AMW-x) were designed and synthesized.

Silver-, calcium-, and copper molybdate compounds: Preparation, antibacterial activity, and mechanisms

Developing novel compounds with antimicrobial properties can be an effective approach to decreasing the number of healthcare-associated infections, particularly in the context of medical devices and touch surfaces. A variety of molybdate powders (Ag₂MoO₄, CaMoO₄, CuMoO₄ and Cu₃Mo₂O₉) were synthesized and characterized, and Escherichia coli was used as a model gram-negative bacterium to demonstrate their antimicrobial properties. Optical density measurements, bacterial colony growth, and stained gel images for protein expression clearly showed that silver- and copper molybdates inhibit bacterial growth, whereas CaMoO₄ exhibited no bactericidal effect. All tests were performed in both daylight and darkness to assess the possible contribution of a photocatalytic effect on the activity observed. The main mechanism responsible for the antibacterial effect observed for Ag₂MoO₄ is related to Ag⁺ release in combination with medium acidification, whereas for compounds containing copper, leaching of Cu²⁺ ions is proposed. All these effects are known to cause damage at the cellular level. A photocatalytic contribution to the antibacterial activity was not clearly observable. Based on the pH and solubility measurements performed for powders in contact with various media (ultrapure water and bacterial growth medium), silver molybdate (Ag₂MoO₄) was identified as the best antibacterial candidate. This compound has great potential for further use in hybrid powder-polymer/varnish systems for touch surfaces in healthcare settings.

Novel β-Ag2MoO4/g-C3N4 heterojunction catalysts with highly enhanced visible-light-driven photocatalytic activity

The kernel of photocatalysis research is the development of catalysts with remarkable photocatalytic activity.

Enhanced energy density of a supercapacitor using 2D CoMoO4 ultrathin nanosheets and asymmetric configuration

Developing a high energy density micro-supercapacitor still remains a big challenge. In this paper, a two-dimensional (2D) CoMoO₄ ultrathin nanosheet (NS)-based asymmetric supercapacitor (ASC) is fabricated. It is found that the CoMoO₄ NS electrode processes a high specific capacitance (153.2 F g^-1) at a current density of 1 mA cm^-2 and this ASC can deliver an energy density of 0.313 mWh cm^-3 at a power density of 80 mW cm^-3, which is higher than that reported in the literature. Moreover, the ASC can drive a light emitting diode (3 mm diameter, red) to work for 6 min after being charged for 10 s. After 5000 cycles, 77.37% of capacitance still remains. We maintain that the ultrathin thickness can significantly shorten the diffusion paths for both electrons and ions, thus leading to fast electron transport and ion diffusion rates. Our results demonstrate that 2D ultrathin NSs could be a new, promising candidate for energy conversion/storage devices, which could offer more accommodating sites for ion intercalation.

Fabrication of potato-like silver molybdate microstructures for photocatalytic degradation of chronic toxicity ciprofloxacin and highly selective electrochemical detection of H2O2

In the present work, potato-like silver molybdate (Ag₂MoO₄) microstructures were synthesized through a simple hydrothermal method. The microstructures of Ag₂MoO₄ were characterized by various analytical and spectroscopic techniques such as XRD, FTIR, Raman, SEM, EDX and XPS. Interestingly, the as-prepared Ag₂MoO₄ showed excellent photocatalytic and electrocatalytic activity for the degradation of ciprofloxacin (CIP) and electrochemical detection of hydrogen peroxide (H₂O₂), respectively. The ultraviolet-visible (UV-Vis) spectroscopy results revealed that the potato-like Ag₂MoO₄ microstructures could offer a high photocatalytic activity towards the degradation of CIP under UV-light illumination, leads to rapid degradation within 40 min with a degradation rate of above 98%. In addition, the cyclic voltammetry (CV) and amperometry studies were realized that the electrochemical performance of Ag₂MoO₄ modified electrode toward H₂O₂ detection. Our H₂O₂ sensor shows a wide linear range and lower detection limit of 0.04-240 μM and 0.03 μM, respectively. The Ag₂MoO₄ modified electrode exhibits a high selectivity towards the detection of H₂O₂ in the presence of different biological interferences. These results suggested that the development of potato-like Ag₂MoO₄ microstructure could be an efficient photocatalyst as well as electrocatalyst in the potential application of environmental, biomedical and pharmaceutical samples.

An efficient photocatalyst for degradation of various organic dyes: Ag@Ag2MoO4-AgBr composite

The Ag2MoO4-AgBr composite was prepared by a facile in-situ anion-exchange method, then the Ag nanoparticles were coated on this composite through photodeposition route to form a novel Ag@Ag2MoO4-AgBr composite. The in-situ Br(-) replacement in a crystal lattice node position of Ag2MoO4 crystal allows for overcoming the resistance of electron transition effectively. Meanwhile silver nano-particles on the surface of Ag@Ag2MoO4-AgBr composite could act as electron traps to intensify the photogeneration electron-hole separation and the subsequent transfer of the trapped electron to the adsorbed O2 as an electron acceptor. As an efficient visible light catalyst, the Ag@Ag2MoO4-AgBr composite exhibited superior photocatalytic activity for the degradation of various organic dyes. The experimental results demonstrated superior photocatalytic rate of Ag@Ag2MoO4-AgBr composite compared to pure AgBr and Ag2MoO4 crystals (37.6% and 348.4% enhancement respectively). The Ag@Ag2MoO4-AgBr composite cloud degraded Rhodamin B, bromophenol blue, and amino black 10b completed in 7min.

Microwave-assisted hydrothermal synthesis of Ag₂(W(1-x)Mox)O₄ heterostructures: Nucleation of Ag, morphology, and photoluminescence properties

Ag2W(1-x)MoxO4 (x=0.0 and 0.50) powders were synthesized by the co-precipitation (drop-by-drop) method and processed using a microwave-assisted hydrothermal method. We report the real-time in situ formation and growth of Ag filaments on the Ag2W(1-x)MoxO4 crystals using an accelerated electron beam under high vacuum. Various techniques were used to evaluate the influence of the network-former substitution on the structural and optical properties, including photoluminescence (PL) emission, of these materials. X-ray diffraction results confirmed the phases obtained by the synthesis methods. Raman spectroscopy revealed significant changes in local order-disorder as a function of the network-former substitution. Field-emission scanning electron microscopy was used to determine the shape as well as dimensions of the Ag2W(1-x)MoxO4 heterostructures. The PL spectra showed that the PL-emission intensities of Ag2W(1-x)MoxO4 were greater than those of pure Ag2WO4, probably because of the increase of intermediary energy levels within the band gap of the Ag2W(1-x)MoxO4 heterostructures, as evidenced by the decrease in the band-gap values measured by ultraviolet-visible spectroscopy.

Synthesis, antifungal evaluation and optical properties of silver molybdate microcrystals in different solvents: a combined experimental and theoretical study

In this study, we investigate the structure, antifungal activity, and optical properties of β-Ag₂MoO₄.

In situ hydrothermal fabrication of a MnO2@CoMoO4@Ni nanohybrid electrode and ultrahigh energy density of ASCs

A flexible AC@Ni//MnO₂@CoMoO₄@Ni asymmetric supercapacitor (ASC) shows an ultrahigh energy density.

Mosaic structure effect and superior catalytic performance of AgBr/Ag2MoO4 composite materials

The research focused on mosaic style AgBr–Ag₂MoO₄ composite materials prepared by in situ composite method. The catalytic efficiency enhanced 149 times compared to pure Ag₂MoO₄. The success of instant catalysis owed to the mosaic structure effect.

Identifying and rationalizing the morphological, structural, and optical properties of [Formula: see text]-Ag2MoO4 microcrystals, and the formation process of Ag nanoparticles on their surfaces: combining experimental data and first-principles calculations

We present a combined theoretical and experimental study on the morphological, structural, and optical properties of β-Ag2MoO4 microcrystals. β-Ag2MoO4 samples were prepared by a co-precipitation method. The nucleation and formation of Ag nanoparticles on β-Ag2MoO4 during electron beam irradiation were also analyzed as a function of electron beam dose. These events were directly monitored in real-time using in situ field emission scanning electron microscopy (FE-SEM). The thermodynamic equilibrium shape of the β-Ag2MoO4 crystals was built with low-index surfaces (001), (011), and (111) through a Wulff construction. This shape suggests that the (011) face is the dominating surface in the ideal morphology. A significant increase in the values of the surface energy for the (011) face versus those of the other surfaces was observed, which allowed us to find agreement between the experimental and theoretical morphologies. Our investigation of the different morphologies and structures of the β-Ag2MoO4 crystals provided insight into how the crystal morphology can be controlled so that the surface chemistry of β-Ag2MoO4 can be tuned for specific applications. The presence of structural disorder in the tetrahedral [MoO4] and octahedral [AgO6] clusters, the building blocks of β-Ag2MoO4, was used to explain the experimentally measured optical properties.

Structural, morphological and optical investigation of β-Ag2MoO4 microcrystals obtained with different polar solvents

In this work, rietveld refinement, morphology and optical properties of β-Ag₂MoO₄ microcrystals were synthesized by the precipitation method using different polar solvents: water, methanol, ethanol, 1-propanol and 1-butanol.

Advanced nanoarchitectures of silver/silver compound composites for photochemical reactions

Silver/silver compound (SSC) composites have received much attention as a type of potential materials in photochemical reactions due to their high efficiency, facile syntheses and availability of raw materials. This article reviews the state-of-the-art progress on the advanced nanoarchitectures of SSC composites. We begin with a survey on the general synthetic strategies for SSC composites, and then step into relatively detailed methods for size and morphology tunable two-component and more delicate multi-component SSC nanostructures. In addition, the electronic structure-related mechanisms of such materials and the recent studies on their stability are summarized. This review also highlights some perspectives on challenges related to the SSC composites and the possible research in the future.