Memorable full-color circularly polarized luminescence from chiral co-assembled polymer films enabled by multipath transfer

Fluorescence-Selective Absorption and Circularly Polarized Fluorescence Energy Transfer Assist the Generation of Multicolor Circularly Polarized Luminescence in Chiral Helical Polyacetylene-Based Janus Nanofibers

Chiroptical nanomaterials with circularly polarized luminescence (CPL) performance have aroused increasing attention. Herein, multicolor CPL-active Janus nanofibers are prepared through a simple parallel electrospinning method using chiral helical polyacetylenes as the chiral source and achiral fluorophores as the fluorescent source. Interestingly, despite a direct spatial isolation between the chiral component and the fluorescent component, blue and green CPL emissions can still be obtained due to the fluorescence-selective absorption behavior of chiral helical polyacetylenes, with a satisfactory dissymmetric factor (glum) of 2 × 10-2 and 2.5 × 10-3, respectively. Moreover, by taking advantage of the circular polarization fluorescence energy transfer process, red CPL emission is further achieved using the obtained blue and green CPL as energy donors and the achiral red fluorophore as an energy acceptor. The present work offers a facile approach to prepare multilevel-structured chiroptical materials with promising application potentials in a flexible photoelectric device.

Aggregate-state-dependent photochromism and circularly polarized luminescence of a chiral biquinoline amphiphile

The photophysical and chiroptical properties of a chiral biquinoline amphiphile were found to be closely related to its aggregate states. Photochromism through photo-induced radical and circularly polarized luminescence were realized in its gel state and thin film state, respectively.

Endowing Metal-Organic Coordination Materials with Chiroptical Activity by a Chiral Anion Strategy

Recently, chiral metal-organic coordination materials have emerged as promising candidates for a wide range of applications in chiroptoelectronics, chiral catalysis, and information encryption, etc. Notably, the chiroptical effect of coordination chromophores makes them appealing for applications such as photodetectors, OLEDs, 3D displays, and bioimaging. The direct synthesis of chiral coordination materials using chiral organic ligands or complexes with metal-centered chirality is very often tedious and costly. In the case of ionic coordination materials, the combination of chiral anions with cationic, achiral coordination compounds through noncovalent interactions may endow molecular materials with desirable chiroptical properties. The use of such a simple chiral strategy has been proven effective in inducing promising circular dichroism and/or circularly polarized luminescence signals. This concept article mainly delves into the latest advances in exploring the efficacy of such a chiral anion strategy for transforming achiral coordination materials into chromophores with superb photo- or electro-chiroptical properties. In particular, ionic small-molecular metal complexes, metal clusters, coordination supramolecular assemblies, and metal-organic frameworks containing chiral anions are discussed. A perspective on the future opportunities on the preparation of chiroptical materials with the chiral anion strategy is also presented.

Precise Modulation of Circularly Polarized Luminescence via Polymer Chiral Co-assembly and Contactless Dynamic Chiral Communication

Circularly polarized luminescence (CPL) plays a pivotal role in cutting-edge display and information technologies. Currently achieving precise color control and dynamic signal regulation in CPL still remains challenging due to the elusory relationship between fluorescence and chirality. Inspired by the natural mechanisms governing color formation and chiral interaction, we proposed an addition-subtraction principle theory to address this issue. Three fluorene-based polymers synthesized by Suzuki polycondensation with different electron-deficient monomers exhibit similar structures and UV/Vis absorption, but distinct fluorescence emissions due to intramolecular charge transfer. Based on this, precise-color CPL-active films are obtained through quantitative supramolecular co-assembly directed by addition principle. Particularly, an ideal white-emitting CPL film (CIE coordinates: (0.33, 0.33)) is facilely fabricated with a high quantum yield of 80.8 % and a dissymmetry factor (glum) of 1.4×10-2. Structural analysis reveals that the ordered stacking orientation favors higher glum. Furthermore, to address the dynamically regulated challenge, the comparable subtraction principle is proposed, involving a contactless chiral communication between excited and ground states. The representative system consisting of as-prepared fluorene-based polymers and chirality-selective absorption azobenzene (Azo)-containing polymers is constructed, achieving CPL weakening, reversal, and enhancement. Finally, a switchable quick response code is realized based on trans-cis isomerization of Azo moiety.

Stimuli-responsive synthetic helical polymers

Synthetic dynamic helical polymers (supramolecular and covalent) and foldamers share the helix as a structural motif. Although the materials are different, these systems also share many structural properties, such as helix induction or conformational communication mechanisms. The introduction of stimuli responsive building blocks or monomer repeating units in these materials triggers conformational or structural changes, due to the presence/absence of the external stimulus, which are transmitted to the helix resulting in different effects, such as assymetry amplification, helix inversion or even changes in the helical scaffold (elongation, J/H helical aggregates). In this review, we show through selected examples how different stimuli (e.g., temperature, solvents, cations, anions, redox, chiral additives, pH or light) can alter the helical structures of dynamic helical polymers (covalent and supramolecular) and foldamers acting on the conformational composition or molecular structure of their components, which is also transmitted to the macromolecular helical structure.

Helical-caging enables single-emitted large asymmetric full-color circularly polarized luminescence

Colorful circularly polarized luminescence materials are desired for 3D displays, information security and asymmetric synthesis, in which single-emitted materials are ideal owing to self-absorption avoidance, evenly entire-visible-spectrum-covered photon emission and facile device fabrication. However, restricted by the synthesis of chiral broad-luminescent emitters, the realization and application of high-performing single-emitted full-color circularly polarized luminescence is in its infancy. Here, we disclose a single-emitted full-color circularly polarized luminescence system (spiral full-color emission generator), composed of whole-vis-spectrum emissive quantum dots and chiral liquid crystals. The system achieves a maximum luminescence dissymmetry factor of 0.8 and remains an order of 10-1 in visible region by tuning its photonic bandgap. We then expand it to a series of desired customized-color circularly polarized luminescence, build chiral devices and further demonstrate the working scenario in the photoinduced enantioselective polymerization. This work contributes to the design and synthesis of efficient chiroptical materials, device fabrication and photoinduced asymmetric synthesis.

Clustering-Triggered Emission Liquid Crystalline Polymer Bearing Cholesterol: Tunable Circularly Polarized Luminescence and Room-Temperature Phosphorescence

Circularly polarized luminescence (CPL) materials with clustering-triggered emission (CTE) characteristic have gradually attracted attention for their unique photophysical properties. However, the majority of reported clusteroluminogens lack chirality and exhibit heterogeneity, making it challenging to achieve a well-defined helical structure necessary for efficient CPL with high dissymmetry factor (glum ). In this paper, chiral liquid crystals are constructed to obtain CTE-based CPL materials with high glum values. Side chain liquid crystal polymer PM6Chol bearing cholesterol clusteroluminogens are designed and synthesized. PM6Chol-coated film and PM6Chol thermal-treated film are also successfully prepared by different film-forming methods. Both the films inherit the CTE characteristic of cholesterol and show excitation wavelength-dependent luminescent behavior. However, the two polymer films exhibit different liquid crystal phase structures, with PM6Chol-coated film being a chiral bilayer smectic C phase and PM6Chol thermal-treated film being an achiral bilayer smectic A phase. Attributed to helical arrangement of cholesterol, PM6Chol-coated film emits efficient CPL with glum values up to 1.0 × 10-1 . For PM6Chol thermal-treated film, no CPL signal is detected due to the absence of helical structure. However, it shows obvious room-temperature phosphorescence with 2.0 s afterglow and 23.9 ms lifetime.

Liquid Crystals Doped with Chiral Fluorescent Polymer: Multi-Color Circularly Polarized Fluorescence and Room-Temperature Phosphorescence with High Dissymmetry Factor and Anti-Counterfeiting Application

Chiral nematic liquid crystals (N*-LCs) can tremendously amplify circularly polarized luminescence (CPL) signals. Doped emissive N*-LCs have been substantially explored. However, their CPL performances still need to be improved, mainly due to the unsatisfying helical twisting power (HTP) of commonly used chiral fluorescent dopants. Chiral fluorescent helical polymers (CFHPs) have outstanding optical activity and CPL performance. The present contribution reports the first success in constructing emissive N*-LCs by doping CFHP into nematic liquid crystals (5CB, N-LCs). The helical assembly structures of N*-LCs effectively amplify the CPL signals of the CFHP. Owing to the high HTP of CFHP, the selective reflection band of N*-LC can be adjusted to fully cover its emission band. A nearly pure CPL with a dissymmetry factor (glum ) up to -1.87 is realized at 9 wt% doping concentration. Taking advantage of the selective reflection mechanism, multi-color CPL-active N*-LCs with high glum are fabricated via further adding achiral fluorophores. Also noticeably, circularly polarized room-temperature phosphorescence with glum up to -1.57 is achieved. Anti-counterfeiting application is demonstrated by exploiting multi-mode optical characteristics of the created N*-LCs. The established strategy for constructing emissive N*-LCs provides a platform for future exploring of CPL-active N*-LCs.

Stepwise Solution-Interfacial Nanoarchitectonics for Assembled Film with Full-Color and White-Light Circularly Polarized Luminescence

The fabrication of chiral thin films with tunable circularly polarized luminescence (CPL) colors is important in developing chiroptical materials but remains challenging due to the lack of assembly-initiated chiral film formation methodology. Here, by adopting a combined solution aggregation and interfacial assembly strategy, we report the fabrication of chiral film materials with full-color and white-light CPL. A biquinoline glutamic acid ester (abbreviated as BQGE) shows a typical aggregation-induced emission property with blue CPL after solution aggregation. Subsequent interfacial assembly of these solution aggregates on a solid substrate leads to the formation of a CPL active film consisting of nanobelt structures. Since the BQGE molecule has a coordination site, the CPL emission of an individual BQGE film can be extended from blue to green emission upon coordination with a zinc ion, accompanied by morphology transition from nanobelts to nanofibers. Further extension to red-color CPL is successfully achieved by coassembly with an achiral acceptor dye. Interestingly, the proper combination of coordination ratio and acceptor loading ratio provides bright white-light CPL emission from the BQGE/Zn²⁺/PDA triad composite film. This work provides a new approach to fabricating chiroptical film materials with controlled microscopic morphology and tunable CPL properties.

Brightening up Full-Color and White Circularly Polarized Luminescence through Chiral Induction and Circularly Polarized Light Excitation

Preparation of chiral materials from achiral helical polymers has aroused great interest among researchers. In this work, chiral small molecules were utilized to accomplish chiral induction toward racemic helical polyacetylene via intermolecular π-π stacking by which chiral films with strong optical activity were fabricated. Furthermore, introducing fluorescent components generated full-color and white circularly polarized luminescence (CPL). A CPL generation mechanism is proposed accordingly, namely circularly polarized light excitation (CP-Ex). CPL emission and amplification of the luminescence dissymmetry factor were achieved under the synergetic effect of CP-Ex and chirality transfer. The CP-Ex mechanism was further verified by the double-layered film consisting of a chiral layer and a fluorescent layer. More noticeably, for double-layered films, the sense of CPL signals can be switched by changing the direction of excitation light. This work opens up new strategies for exploring tunable multiple- and white-color CPL materials.