M-sequence-coded excitation for magneto-acoustic imaging

Coded Excitation for Ultrasonic Testing: A Review

Originating in the early 20th century, ultrasonic testing has found increasingly extensive applications in medicine, industry, and materials science. Achieving both a high signal-to-noise ratio and high efficiency is crucial in ultrasonic testing. The former means an increase in imaging clarity as well as the detection depth, while the latter facilitates a faster refresh of the image. It is difficult to balance these two indicators with a conventional short pulse to excite the probe, so in general handling methods, these two factors have a trade-off. To solve the above problems, coded excitation (CE) can increase the pulse duration and offers great potential to improve the signal-to-noise ratio with equivalent or even higher efficiency. In this paper, we first review the fundamentals of CE, including signal modulation, signal transmission, signal reception, pulse compression, and optimization methods. Then, we introduce the application of CE in different areas of ultrasonic testing, with a focus on industrial bulk wave single-probe detection, industrial guided wave detection, industrial bulk wave phased array detection, and medical phased array imaging. Finally, we point out the advantages as well as a few future directions of CE.

Magneto-acoustic-electrical tomography combining maximum length sequence-coded excitation and liquid metal image contrast agent

Magneto-acoustic-electrical tomography (MAET) combines the advantages of ultrasound and electrical impedance functional tomography methods and has important research value in the early diagnosis of tumors and biocurrent monitoring. In this study, we propose a MAET method combining liquid metal image enhancement and maximum length sequence (MLS)-coded excitation to improve the signal-to-noise ratio (SNR) of MAET. The results indicate that liquid metal can achieve image enhancement of tissue MAET. When 7-, 15-, 31- and 63-bit MLS-coded excitations were applied to the samples, the SNR was improved by 28, 34, 40 and 45 dB, respectively. For a similar SNR improvement, the total used time under 31-bit MLS-coded excitation can be shortened to 23% under single-pulse excitation. The experimental results prove the feasibility of applying the MLS code to rotational MAET and reveal the significance of liquid metal as an image intensifier to improve the quality of MAET.

Research on Golay-coded excitation in real-time imaging of high frequency ultrasound biomicroscopy

High frequency ultrasonic imaging provides clinicians with high-resolution diagnostic images and more accurate measurement results. The technique is now widely used in ophthalmology, dermatology, and small animal imaging. However, since ultrasonic attenuation in tissue increases rapidly with increasing frequency, the depth of detection of high frequency ultrasound in tissue is limited to a few millimeters. In this paper, a novel method of using Golay-coded excitation as a replacement for conventional single-pulse excitation in high frequency ultrasound biomicroscopy was proposed, and real-time imaging was realized. While maintaining the transmission voltage and image resolution unchanged, the detection depth can be effectively improved. The ultrasonic transmission frequency is 30 MHz and the transmission voltage is ± 60 V p-p. In this study, 4-bit, 8-bit, and 16-bit coding sequences and decoding compression were used. To verify the effectiveness of the coding sequence in real-time imaging of ultrasound biomicroscopy, we designed a 10-μm diameter line target echo experiment, an ultrasound phantom experiment, and an in vitro porcine eye experiment. The experimental results show that the code/decode method of signal processing can not only maintain a resolution consistent with that of single-pulse transmission, but can also improve the detection depth and signal-to-noise ratio.