Slice-thickness evaluation in CT and MRI: an alternative computerised procedure

Radio Frequency MRI coils and safety: how infrared thermography can support quality assurance

Background

The safety controls in Resonance Magnetic Imaging (MRI) diagnostic site are numerous and complex. Some of these are contained in international directives and regularly conducted by medical physics expert after acceptance tests, consisting of a series of checks, measurements, evaluations called quality controls (QCs) and made to guarantee the image quality of the equipment. In this context, ensuring that the coils are in proper operating conditions is important to prevent and reduce errors in use and to preserve patient safety.

Results

A study by thermography was conducted to evaluate temperature changes of MRI coils during Quality Control (QC), in order to prevent any problems for the patient due to Radio Frequency waves. This experiment involves use of a thermal camera to detect temperature variations during MRI scans using head and body coils of two different tomography 1.5 T and 3.0 T static magnetic field. Thermal camera was positioned inside the MRI room to acquire images every 15 s for all the scansions duration. The observations have shown a temperature increase only for body coil of 1.5 MRI tomography, whereas no significative temperature variation has occurred for the other coils under observation. This temperature increase was later related to a fault of such coil.

Conclusions

The authors believe this simple method useful as first approach, during routinely QCs, to verify coils functioning and so to avoid patient hazards and are preparing a methodological study about functioning of the coils with respect to their temperature variation.

A Novel Phantom and a Dedicated Developed Software for Image Quality Controls in X-Ray Intraoral Devices

Background:

Periodic quality control (QC) procedures are important in order to guarantee the image quality of radiological equipment and are also conducted using phantoms simulating human body.

Objective:

To perform (QC) measurements in intraoral imaging devices, a new and simple phantom was manufactured. Besides, to simplify QC procedures, computerized LabView-based software has been devised, enabling determination of image quantitative parameters in real time or during post processing.

Material and Methods:

In this experimental study, the novel developed phantom consists of a Polymethyl methacrylate (PMMA) circular insert. It is able to perform a complete QC image program of X-ray intraoral equipment and also causes the evaluation of image uniformity, high and low contrast spatial resolution, image linearity and artefacts, with only two exposures.

Results:

Three raters analyzed the images using the LabView dedicated software and determined the quantitative and qualitative parameters in an innovative and accurate way. Statistical analysis evaluated the reliability of this study. Good accuracy of the quantitative and qualitative measurements for the different intraoral systems was obtained and no statistical differences were found using the inter-rater analysis.

Conclusion:

The achieved results and the related statistical analysis showed the validity of this methodology, which could be proposed as an alternative to the commonly adopted procedures, and suggested that the novel phantom, coupled with the LabView based software, could be considered as an effective tool to carry out a QC image program in a reproducible manner.

Evaluation of US and MRI techniques for carotid stenosis: a novel phantom approach

Carotid atherosclerosis is very important in the pathogenesis of cerebral ischemia. Ultrasonography (US) and magnetic resonance imaging (MRI) are the predominant noninvasive techniques capable to identify the presence and stage of intra-plaque hemorrage. In this work, we propose a novel dedicated phantom that can be used for both US and MRI scanners to evaluate carotid atherosclerotic lesions. The phantom consists of a polymethyl metacrylate (PMMA) diagonally crossed by a PMMA hollow cylinder simulating a blood vessel. To simulate a stenosis, we inserted a plastic hollow tube inside the cylinder. Quantitative image analysis, based on accuracy measurements, was performed on two US and two MRI scanners. The accuracy measurements have highlighted the use of the 3.0 T MRI scanner to characterize the vessel stenosis. However, no significant difference between US and MRI techniques was found in Fisher exact test and inter-rater agreement. The concordance correlation coefficient showed a moderate agreement between some methods. Agreement between 3.0 T and other methods results poor, and this could be due to the fact that the 3.0 T has a better resolution compared to a US and MR 1.5 T. These methods seem to have similar efficacies for the evaluation of vessel stenosis, legitimizing the use of the developed phantom as a versatile and reproducible instrument that could be used during quality controls programs.

CT and MRI slice separation evaluation by LabView developed software

The efficient use of Computed Tomography (CT) and Magnetic Resonance Imaging (MRI) equipment necessitates establishing adequate quality-control (QC) procedures. In particular, the accuracy of slice separation, during multislices acquisition, requires scan exploration of phantoms containing test objects. To simplify such procedures, a novel phantom and a computerised LabView-based procedure have been devised, enabling determination the midpoint of full width at half maximum (FWHM) in real time while the distance from the profile midpoint of two progressive images is evaluated and measured. The results were compared with those obtained by processing the same phantom images with commercial software. To validate the proposed methodology the Fisher test was conducted on the resulting data sets. In all cases, there was no statistically significant variation between the commercial procedure and the LabView one, which can be used on any CT and MRI diagnostic devices.