Comparison of Efficacy between 3D Navigation-Assisted Percutaneous Iliosacral Screw and Minimally Invasive Reconstruction Plate in Treating Sacroiliac Complex Injury

Finite Element Analysis and Transiliac-Transsacral Screw Fixation for Posterior Pelvic Ring with Sacrum Dysplasia

OBJECTIVE

Posterior pelvic ring sacroiliac screws are preferred by clinicians for their good biomechanical performance. However, there are few studies on mechanical analysis and intraoperative screw insertion of the dysplastic sacrum and sacroiliac screw. This study investigated the biomechanical performance of oblique sacroiliac screws (OSS) in S1 combined with transiliac-transsacral screws (TTSs) in S2 for pelvic fracture or sacroiliac dislocation with dysplastic sacrum and evaluated the safety of screw placement assisted by the navigation template.

METHODS

Six models were established, including one OSS fixation in the S2 segment, one transverse sacroiliac screw (TSS) fixation in the S2 segment, one TTS fixation in the S2 segment, one OSS fixation in the S1 and S2 segments, one OSS fixation in the S1 segment and one TSS fixation in the S2 segment, one OSS fixation in the S1 segment and one TTS fixation in the S2 segment. Then, finite element analysis (FEA) was performed. Twelve dysplastic sacrum patients with pelvis fracture or sacroiliac dislocation underwent OSS insertion in the S1 combined with TTS insertion in the S2 under the assistance of the patient-specific locked navigation template. Grading and Matta scores were evaluated after surgery.

RESULTS

In the one-screw fixation group, the vertical displacements of the sacrum surface of S2 OSS, S2 TSS and S2 TTS were 1.23, 1.42, and 1.22 mm, respectively, and the maximum stress of screw were 139.45 MPa, 144.81 MPa, 126.14 MPa, respectively. In the two-screw fixation group, the vertical displacements of the sacrum surface of the S1 OSS + S2 OSS, S1 OSS + S2 TSS and S1 OSS + S2 TTS were 0.91, 1.06, and 0.75 mm, respectively, and the maximum stress of screw were 149.26 MPa, 167.13 Pa, 136.76 MPa, respectively. Clinically, a total of 12 TTS and OSS were inserted under the assistance of navigation templates, with a surgical time of 55 ± 7.69 min, bleeding of 57.5 ± 18.15 ml and radiation times of 14.5 ± 4.95. One of the TTS and one of the OSS were grade 1, and the other screws were grade 0. The Matta scores of nine patients were excellent, and three patents were good.

CONCLUSION

OSS in the S1 combined with TTS in the S2 had the best mechanical stability in six models, and it is safe for screw insertion assisted by the patient-specific locked navigation template.

Overview of Methods to Quantify Invasiveness of Surgical Approaches in Orthopedic Surgery—A Scoping Review

Background

There is a trend toward minimally invasive and more automated procedures in orthopedic surgery. An important aspect in the further development of these techniques is the quantitative assessment of the surgical approach. The aim of this scoping review is to deliver a structured overview on the currently used methods for quantitative analysis of a surgical approaches' invasiveness in orthopedic procedures. The compiled metrics presented in the herein study can serve as the basis for digitization of surgery and advanced computational methods that focus on optimizing surgical procedures.

Methods

We performed a blinded literature search in November 2020. In-vivo and ex-vivo studies that quantitatively assess the invasiveness of the surgical approach were included with a special focus on radiological methods. We excluded studies using exclusively one or multiple of the following parameters: risk of reoperation, risk of dislocation, risk of infection, risk of patient-reported nerve injury, rate of thromboembolic event, function, length of stay, blood loss, pain, operation time.

Results

The final selection included 51 articles. In the included papers, approaches to 8 different anatomical structures were investigated, the majority of which examined procedures of the hip (57%) and the spine (29%). The different modalities to measure the invasiveness were categorized into three major groups “biological” (23 papers), “radiological” (25), “measured in-situ” (14) and their use “in-vivo” or “ex-vivo” was analyzed. Additionally, we explain the basic principles of each modality and match it to the anatomical structures it has been used on.

Discussion

An ideal metric used to quantify the invasiveness of a surgical approach should be accurate, cost-effective, non-invasive, comprehensive and integratable into the clinical workflow. We find that the radiological methods best meet such criteria. However, radiological metrics can be more prone to confounders such as coexisting pathologies than in-situ measurements but are non-invasive and possible to perform in-vivo. Additionally, radiological metrics require substantial expertise and are not cost-effective. Owed to their high accuracy and low invasiveness, radiological methods are, in our opinion, the best suited for computational applications optimizing surgical procedures. The key to quantify a surgical approach's invasiveness lies in the integration of multiple metrics.

Personalized Three-Dimensional Printed Anterior Titanium Plate to Treat Double-Column Acetabular Fractures: A Retrospective Case-Control Study

Objective

To compare the clinical efficacy and safety of a personalized three‐dimensional (3D) printed dynamic anterior plate–screw system for the quadrilateral area (DAPSQ) titanium plate and a traditional DAPSQ reconstruction plate in the treatment of double‐column acetabular fractures.

Methods

This was a retrospective case‐control study. From May 2014 to January 2018, 43 patients with double‐column acetabular fractures underwent open reduction and internal fixation. Among these, 20 cases were fixed with a 3D printed DAPSQ plate (3D printed group) and 23 cases were fixed with a DAPSQ reconstruction plate (control group). The 3D printed group comprised 15 men and 5 women, with an average age of 50.1 ± 8.2 years. The control group comprised 16 men and 7 women, with an average age of 51.0 ± 8.6 years. The evaluation index included the surgical data (i.e. blood loss, operating time, duration of hospital stay, and intraoperative and postoperative complications), position and length of implants, reduction quality, hip function, and related complications. The reduction quality was evaluated using the Matta scoring standard and hip function was evaluated using the modified Merle d’Aubigné score.

Results

A total of 43 patients met the inclusion criteria. The mean postoperative follow up was 35.2 months in the 3D printed group and 36.9 months in the control group. There were no significant group differences in demographic data between the two groups. The position and length of the 3D printed implants were generally in accord with preoperative planning using a 3D pelvic model. Patients in the 3D printed group had significantly shorter operation time (223.2 vs 260.5 min, P < 0.05) and less intraoperative blood loss (930.4 vs 1426.1 mL, P < 0.05) compared to the control group. Anatomic, imperfect, and poor reduction was obtained in 13, 5, and 2 cases in the 3D printed group, respectively, and was obtained in 12, 8, and 3 cases in the control group. The modified Merle d’Aubigné scores were excellent in 11 cases, good in seven cases, and fair in two cases in the 3D printed group. They were excellent in 11 cases, good in eight cases, fair in three cases, and poor in one case in the control group. The reduction quality and hip function did not differ within the groups (P > 0.05). The general complication rate in the 3D printed group and the control group was 15% and 26.1%, respectively, but the difference between the two groups was not statistically significant.

Conclusion

Use of a personalized 3D printed DAPSQ plate has potential advantages in reducing the operation time and blood loss during the treatment of double‐column acetabular fractures.

Single Ilioinguinal Approach to Treat Complex Acetabular Fractures with Quadrilateral Plate Involvement: Outcomes Using a Novel Dynamic Anterior Plate-Screw System

Objectives

To evaluate the efficacy and safety of a novel fixation technique referred to as the dynamic anterior plate–screw system for quadrilateral plate (DAPSQ) for complex acetabular fractures with quadrilateral plate involvement through the single ilioinguinal approach.

Methods

A total of 32 patients with acetabular fractures, selected between January 2009 and March 2016, were managed by DAPSQ with “quadrilateral screws” through single ilioinguinal approach. The primary outcomes measure was the reduction quality evaluated according to the Matta radiological criteria, and the functional outcomes were evaluated by the modified Merle d'Aubigné score at the last follow‐up. Secondary outcomes were postoperative complications and intraoperative conditions included, for instance, operation time and blood loss.

Results

Of these 32 consecutive patients, 19, 9, and 4 were classified as both columns, anterior column posterior hemi‐transverse, and T‐shaped fractures, respectively, and with an average of 47 months’ follow‐up. Anatomic reduction was obtained in 19 cases (59%), imperfect reduction in 9 cases (28%), and poor reduction in 4 cases (13%). The modified Merle d'Aubigné scores were excellent in 15 cases (47%), good in 13 cases (41%), fair in 2 cases (6%), and poor in 2 cases (6%). Three cases sustained temporary lateral femoral cutaneous nerve injuries. One patient had a superficial wound infection that resolved after debridement. Five patients had posttraumatic arthritis; one of them underwent total hip arthroplasty at 46 months. No cases had quadrilateral screws entering the hip joint.

Conclusion

The use of DAPSQ with quadrilateral screws is an effective and safe choice for complex acetabular fractures with quadrilateral plate involvement through the single ilioinguinal approach.