Synthesis and Magnetic Properties of Maghemite (gamma-Fe(2)O(3)) Short-Nanotubes

Magnetic Tunability via Control of Crystallinity and Size in Polycrystalline Iron Oxide Nanoparticles

Iron oxide nanoparticles (IONPs) are widely used for biomedical applications due to their unique magnetic properties and biocompatibility. However, the controlled synthesis of IONPs with tunable particle sizes and crystallite/grain sizes to achieve desired magnetic functionalities across single-domain and multi-domain size ranges remains an important challenge. Here, a facile synthetic method is used to produce iron oxide nanospheres (IONSs) with controllable size and crystallinity for magnetic tunability. First, highly crystalline Fe3O4 IONSs (crystallite sizes above 24 nm) having an average diameter of 50 to 400 nm are synthesized with enhanced ferrimagnetic properties. The magnetic properties of these highly crystalline IONSs are comparable to those of their nanocube counterparts, which typically possess superior magnetic properties. Second, the crystallite size can be widely tuned from 37 to 10 nm while maintaining the overall particle diameter, thereby allowing precise manipulation from the ferrimagnetic to the superparamagnetic state. In addition, demonstrations of reaction scale-up and the proposed growth mechanism of the IONSs are presented. This study highlights the pivotal role of crystal size in controlling the magnetic properties of IONSs and offers a viable means to produce IONSs with magnetic properties desirable for wider applications in sensors, electronics, energy, environmental remediation, and biomedicine.

The Waelz Slag from Electric Arc Furnace Dust Processing: Characterization and Magnetic Separation Studies

The Waelz slag generated during electric arc furnace dust processing is an iron-rich product with significant amounts of iron, zinc and copper. About 600-800 kg of the Waelz slag is generated per ton of the dust processed. The Waelz slag samples from two different plants were thoroughly characterized using inductively coupled plasma optical emission spectroscopy (ICP-AES), X-ray diffraction analysis (XRD), chemical phase analysis, Mössbauer spectroscopy and other supporting methods. The phase distribution of iron, zinc and copper was determined in the Waelz slag samples. Low-intensity wet magnetic separation was tested for the iron recovery from the Waelz slag samples. It was found that the Waelz slag samples have complex chemical and mineralogical compositions, which can impede the selective recovery of valuable elements. The obtained results indicate that the chemical and mineralogical composition of the Waelz slag samples has a considerable effect on the magnetic separation indexes. The experiments showed that the iron concentrates with Fe contents of 73% and 46.8% with the metallization degrees of 87.2% and 57.5% and the iron recovery degree of 54.8% and 52.9% were obtained at optimal conditions for two different samples, respectively, without selective segregation of Cu and Zn in the magnetic or non-magnetic fraction.

Direct binding and characterization of laccase onto iron oxide nanoparticles

Iron oxide nanoparticles (IONPs) exhibit unique magnetic properties and possess a high surface-to-volume ratio, making them ideal candidates for the conjugation of substances, including enzymes. Laccase (EC 1.10.3.2), an oxidative enzyme with diverse applications, presents an opportunity for enhancing stability and reusability through innovative immobilization techniques, thus reducing overall process costs. In this study, we employed a direct binding procedure via carbodiimide activation to conjugate laccase onto IONPs synthesized using thermal chemical coprecipitation. Stabilization of the nanoparticles was achieved using thioglycerol and polyvinyl alcohol (PVA) as capping agents. Characterization of the synthesized nanoparticles was conducted using UV-spectroscopy, Fourier transform infrared spectroscopy (FTIR), x-ray diffraction, scanning electron microscopy, and energy dispersive x-ray spectroscopy. FTIR spectroscopy analysis confirmed successful laccase binding to magnetic nanoparticles, with binding efficiencies of 90.65% and 73.02% observed for thioglycerol and PVA capped IONPs, respectively. Furthermore, the conjugated enzyme exhibited remarkable stability, retaining nearly 50% of its initial activity after 20 reuse cycles. This research demonstrates that immobilizing laccase onto IONPs enhances its activity, stability, and reusability, with the potential for significant cost savings and expanded applications in various fields.

Magnetically Controlled Hyaluronic Acid-Maghemite Nanocomposites with Embedded Doxorubicin

The controllable delivery of drugs is a key task of pharmacology. For this purpose, a series of polymer composites was synthesized via the cross-linking of hyaluronate and a hyaluronate/polyacrylate mixture with Fe2O3 nanoparticles. The cross-linking imparts magnetic properties to the composites, which are more pronounced for the ternary hyaluronate/polyacrylate/γ-Fe2O3 composites compared with the binary hyaluronate/Fe2O3 composites. When dispersed in water, the composites produce microsized hydrogel particles. Circulation of the ternary microgels in an aqueous solution at a speed of 1.84 cm/s can be stopped using a permanent external magnet with a magnetic flux density of 400 T. The composite hydrogels can absorb the antitumor antibiotic doxorubicin (Dox); the resulting constructs show their cytotoxicity to tumor cells to be comparable to the cytotoxicity of Dox itself. The addition of the hyaluronidase enzyme induces degradation of the binary and ternary microgels down to smaller particles. This study presents prospectives for the preparation of magnetically controlled biodegradable polymer carriers for the encapsulation of bioactive substances.

Highly efficient and recyclable novel spindles Fe2O3@SiO2/In2O3 nanomagnetic catalyst designed for green synthesis of azomethine compounds

A novel and reusable nanomagnetic catalyst, Fe2O3@SiO2/In2O3, was synthesized by a facile chemical approach in three successive steps. The nanocatalyst was characterized by FT-IR, XRD, SEM, EDX, TEM, and VSM. The XRD pattern displays the characteristic peaks of Fe2O3 and SiO2, accompanied by new peaks assigned to different planes of In2O3 that confirm the formation of In2O3 on the surface of Fe2O3@SiO2 core/shell spindles. The TEM micrographs show spindle-like particles of Fe2O3 covered with SiO2 shell, and the In2O3 nanoparticles in an average diameter of 20 nm are hung on the surface of the Fe2O3@SiO2. The nanomagnetic catalyst Fe2O3@SiO2/In2O3 was used for the transformation of the (4-nitrophenyl)-1-phenyl-1H-pyrazole-5-amine, and chalcones derivatives, into valuable azomethine compounds of 3-(substituted)-1-(pyridine-2-yl)allylidene)-3-(4-nitrophenyl)-1-phenyl-1H-pyrazole-5-amine with high rate and efficient catalyst recovery. The yield obtained through the catalytic route reached 90–95% in shorter reaction times compared with uncatalyzed reaction method.

Graphical abstract

Modifications of EHPDB Physical Properties through Doping with Fe2O3 Nanoparticles (Part II)

The aim of our study was to analyze the influence of various concentrations of γ-Fe₂O₃ nanoparticles on the physical properties of the liquid crystalline ferroelectric SmC* phase, as well as to check the effect of introducing nanoparticles in the LC matrix on their properties in the prepared five nanocomposites. UV-vis spectroscopy showed that the admixture reduced the absorption of nanocomposites in the UV range, additional absorption bands appeared, and all nanocomposites were transparent in the range of 500–850 nm. The molecular dynamics in particular phases of the nanocomposites were investigated by the dielectric spectroscopy method, and it was found that nanoparticles caused a significant increase in the dielectric constant at low frequencies, a strong modification of the dielectric processes in the SmC* phase, and the emergence of new relaxation processes for the highest dopant concentrations. SQUID magnetometry allowed us to determine the magnetic nature of the nanoparticles used, and to show that the blocked state of nanoparticles was preserved in nanocomposites (hysteresis loops were also registered in the ferroelectric SmC* phase). The dependence of the coercive field on the admixture concentration and the widening of the hysteresis loop in nanocomposites in relation to pure nanoparticles were also found. In turn, the FT-MIR spectroscopy method was used to check the influence of the impurity concentration on the formation/disappearance or modification of the absorption bands, and the modification of both the FWHM and the maximum positions for the four selected vibrations in the MIR range, as well as the discontinuous behavior of these parameters at the phase transitions, were found.

Modifications of FLC Physical Properties through Doping with Fe2O3 Nanoparticles (Part I)

The aim of this paper is to show, by systematic studies, the influence of γ-Fe₂O₃ nanoparticles on the physical parameters of the liquid crystalline matrix, exhibiting a ferroelectric phase in a wide temperature range. The detailed research was carried out by using diffraction (PXRD), microscopic (OM, SEM, FCPM, POM), thermal (DSC), optical (TLI), electric and spectroscopic (FTIR) methods. We show that even the smallest concentration of γ-Fe₂O₃ nanoparticles largely modifies the parameters of the ferroelectric SmC* phase, such as spontaneous polarization, switching time, tilt angle, rotational viscosity, dispersion anchoring energy coefficient and helix pitch. The admixture also causes a significant reduction in the temperature of phase transitions, broadening the SmA* phase at the expense of the SmC* phase and strong streaking of the texture. We present and explain the non-monotonic modification of these parameters with an increase in the nanoparticle concentration. The influence of oleic acid admixture on these parameters is also widely discussed. We have shown that certain parameters of organic-metal nanocomposites can be controlled by the appropriate amount of metal admixture.

Magnetic sulfur-doped carbons for mercury adsorption

Mercury pollution is a significant threat to the environment and health worldwide. Therefore, effective and low-cost absorbents that are easily scalable are needed for real-world applications. Enlarging the surface area of the materials and doping with heteroatoms are two of the most common strategies to cope with this problem. Sulfur-doped activated carbon synthesized from the carbonization of inverse vulcanized thiopolymers makes it possible to combine both large specific surface area and doping of heteroatoms, resulting in outperformance in mercury uptake against commercial activated carbons. Convenient recovery of mercury absorbents after treatment should be beneficial in mercury collecting and recycling. Therefore, magnetic sulfur-doped carbons (MSCs) were prepared by functionalizing sulfur doped carbons through chemical precipitation with magnetic iron oxides. Besides the characterisations of materials, mercury uptake experiments, such as stactic test, capacity test, impact of solution pH, and mixed ions interferences were performed. These MSCs exhibit high specific surface area (1,329 m²/g), high sulfur content (up to 14.8 wt%), porous structure, low cost, and are convenient for retrieval. MSCs are demonstrated high uptake capacity (187 mg g^-1) and efficiency in mercury solution and multifunctional absorption in mixed ions solution, showing their potential to be applied in water purification and environmental remediation.

Room Temperature Magnetic Memory Effect in Nanodiamond/γ-Fe2O3 Composites

We report a room temperature magnetic memory effect (RT-MME) from magnetic nanodiamond (MND) (ND)/γ-Fe₂O₃ nanocomposites. The detailed crystal structural analysis of the diluted MND was performed by synchrotron radiation X-ray diffraction, revealing the composite nature of MND having 99 and 1% weight fraction ND and γ-Fe₂O₃ phases, respectively. The magnetic measurements carried out using a DC SQUID magnetometer show the non-interacting superparamagnetic nature of γ-Fe₂O₃ nanoparticles in MND have a wide distribution in the blocking temperature. Using different temperature, field, and time relaxation protocols, the memory phenomenon in the DC magnetization has been observed at room temperature (RT). These findings suggest that the dynamics of MND are governed by a wide distribution of particle relaxation times, which arise from the distribution of γ-Fe₂O₃ nanoparticle size. The observed RT ferromagnetism coupled with MME in MND will find potential applications in ND-based spintronics.

Recovery of γ-Fe2O3 from copper ore tailings by magnetization roasting and magnetic separation

To comprehensively reuse copper ore tailings, the recovery of γ-Fe2O3 from magnetic roasted slag after sulfur release from copper ore tailings followed by magnetic separation is performed. In this work, after analysis of chemical composition and mineralogical phase composition, the effects of parameters in both magnetization roasting and magnetic separation process with respect to roasting temperature, residence time, airflow, particle size distribution, magnetic field intensity, and the ratio of sodium dodecyl sulfonate to roasted slag were investigated. Under optimum parameters, a great number of γ-Fe2O3 is recycled with a grade of 66.86% and a yield rate of 67.21%. Meanwhile, the microstructure, phase transformation and magnetic property of copper ore tailings, roasted slag, and magnetic concentrate are carried out.

Green synthesis, antimicrobial, antibiofilm and antitumor activities of superparamagnetic γ-Fe2O3 NPs and their molecular docking study with cell wall mannoproteins and peptidoglycan

Fatty acids-assisted superparamagnetic maghemite (γ-Fe₂O₃) NPs was biologically synthesized using extract of polyherbal drug Liv52 (L52E). The NPs were characterized by UV-vis spectroscopy, FT-IR, SEM, TEM, EDX, XRD and VSM. The major biological molecules present in L52E analysed by GC-MS were saturated fatty acids (palmitic acid 21.95%; stearic acid 13.99%; myristic acid 1.14%), monounsaturated fatty acid (oleic acid 18.43%), polyunsaturated fatty acid (linoleic acid 20.45%), and aromatic phenol (cardanol monoene 11.92%) that could imply in bio-fabrication and stabilization of γ-Fe₂O₃ NPs. The FT-IR spectra revealed involvement of carboxylic group of fatty acids, amide group of proteins and hydroxyl group of phenolic compounds that acts as reducing and capping agents. The synthesized NPs were used to investigate their antimicrobial, antibiofilm activity against P. aeruginosa, MRSA and C. albicans and anticancer activity on colon cancer cells (HCT-116) for biomedical applications. Further, molecular docking study was performed to explore the interaction of Fe₂O₃ NPs with major cell wall components i.e., peptidoglycan and mannoproteins. The docking studies revealed that Fe₂O₃ interacted efficiently with peptidoglycan and mannoproteins and Fe₂O₃ get accommodated into catalytic cleft of mannoprotein. Due to magnetic property, the biological activity of γ-Fe₂O₃ can be further enhanced by applying external magnetic field alone or in amalgamation with other therapeutics drugs.

Synthesis of cost-effective magnetic nano-biocomposites mimicking peroxidase activity for remediation of dyes

The present study describes preparation of cellulose incorporated magnetic nano-biocomposites (CNPs) by using cellulose as base material. The prepared CNPs were characterised by SEM, EDAX, TEM, XRD, and FT-IR and found to exhibit an intrinsic peroxidase-like activity with a K_m and V_max of 550 μM and 3.8 μM/ml/min, respectively. The CNPs exhibited higher pH and thermal stability compared to commercial peroxidase. These nanocomposites were able to completely remove (i) a persistent azo dye, methyl orange at a concentration of 50 ppm, within 60 min under acidic conditions (pH 3.0) and also (ii) decolourize commercial textile dye mixture under acidic conditions within 30 min. CNP-mediated degradation of dyes into simple products was further confirmed by UV-Vis and AT-IR spectroscopy The added advantage of CNPs separation after decolourization by simple magnet due to their magnetic properties and consequent reusability makes them fairy attractive system for dye remediation from environmental samples or textile industries effluents.

Irregularly Shaped Iron Nitride Nanoparticles as a Potential Candidate for Biomedical Applications: From Synthesis to Characterization

Magnetic nanoparticles (MNPs) have been extensively used in drug/gene delivery, hyperthermia therapy, magnetic particle imaging (MPI), magnetic resonance imaging (MRI), magnetic bioassays, and so forth. With proper surface chemical modifications, physicochemically stable and nontoxic MNPs are emerging contrast agents and tracers for in vivo MRI and MPI applications. Herein, we report the high magnetic moment, irregularly shaped γ'-Fe4N nanoparticles for enhanced hyperthermia therapy and T2 contrast agent for MRI application. The static and dynamic magnetic properties of γ'-Fe4N nanoparticles are characterized by a vibrating sample magnetometer (VSM) and a magnetic particle spectroscopy (MPS) system, respectively. Compared to the γ-Fe2O3 nanoparticles, γ'-Fe4N nanoparticles show at least three times higher saturation magnetization, which, as a result, gives rise to the stronger dynamic magnetic responses as proved in the MPS measurement results. In addition, γ'-Fe4N nanoparticles are functionalized with an oleic acid layer by a wet mechanical milling process. The morphologies of as-milled nanoparticles are characterized by transmission electron microscopy (TEM), dynamic light scattering (DLS), and nanoparticle tracking analyzer (NTA). We report that with proper surface chemical modification and tuning on morphologies, γ'-Fe4N nanoparticles could be used as tiny heating sources for hyperthermia and contrast agents for MRI applications with minimum dose.

Iron oxides nanoparticles (IOs) exposed to magnetic field promote expression of osteogenic markers in osteoblasts through integrin alpha-3 (INTa-3) activation, inhibits osteoclasts activity and exerts anti-inflammatory action

Background

Prevalence of osteoporosis is rapidly growing and so searching for novel therapeutics. Yet, there is no drug on the market available to modulate osteoclasts and osteoblasts activity simultaneously. Thus in presented research we decided to fabricate nanocomposite able to: (i) enhance osteogenic differentiation of osteoblast, (i) reduce osteoclasts activity and (iii) reduce pro-inflammatory microenvironment. As a consequence we expect that fabricated material will be able to inhibit bone loss during osteoporosis.

Results

The α-Fe₂O₃/γ-Fe₂O₃ nanocomposite (IOs) was prepared using the modified sol–gel method. The structural properties, size, morphology and Zeta-potential of the particles were studied by means of XRPD (X-ray powder diffraction), SEM (Scanning Electron Microscopy), PALS and DLS techniques. The identification of both phases was checked by the use of Raman spectroscopy and Mössbauer measurement. Moreover, the magnetic properties of the obtained IOs nanoparticles were determined. Then biological properties of material were investigated with osteoblast (MC3T3), osteoclasts (4B12) and macrophages (RAW 264.7) in the presence or absence of magnetic field, using confocal microscope, RT-qPCR, western blot and cell analyser. Here we have found that fabricated IOs: (i) do not elicit immune response; (ii) reduce inflammation; (iii) enhance osteogenic differentiation of osteoblasts; (iv) modulates integrin expression and (v) triggers apoptosis of osteoclasts.

Conclusion

Fabricated by our group α-Fe₂O₃/γ-Fe₂O₃ nanocomposite may become an justified and effective therapeutic intervention during osteoporosis treatment.

MOF-derived (MoS2, γ-Fe2O3)/graphene Z-scheme photocatalysts with excellent activity for oxygen evolution under visible light irradiation

Constructing Z-scheme heterojunctions is considered as an effective strategy to obtain catalysts of high efficiency in electron–hole separation in photocatalysis. Unfortunately, suitable heterojunctions are difficult to fabricate because the direct interaction between two semiconductors may lead to unpredictable negative effects such as electron scattering or electron trapping due to the existence of defects which causes the formation of new substances. Furthermore, the van der Waals contact between two semiconductors also results in bad electron diffusion. In this work, a MOF-derived carbon material as a Z-scheme photocatalyst was synthesized via one-step thermal treatment of MoS₂ dots @Fe-MOF (MIL-101). Under visible light irradiation, the well-constructed Z-scheme (MoS₂, γ-Fe₂O₃)/graphene photocatalyst shows 2-fold photocatalytic oxygen evolution activity (4400 μmol g⁻¹ h⁻¹) compared to that of γ-Fe₂O₃/graphene (2053 μmol g⁻¹ h⁻¹). Based on ultraviolet photoelectron spectrometry (UPS), Mott–Schottky plot, photocurrent and photoluminescence spectroscopy (PL) results, the photo-induced electrons from the conduction band of γ-Fe₂O₃ could transport quickly to the valence band of MoS₂via highly conductive graphene as an electron transport channel, which could significantly enhance the electron–hole separation efficiency as well as photocatalytic performance.

The heterojunction between MoS₂ and γ-Fe₂O₃ was constructed via linking by in situ formed graphene, which resulted in a good photocatalyst for the oxygen evolution reaction, showing O₂ evolution activity of 4400 μmol g⁻¹ h⁻¹.

Preparation of NH2-Functionalized Fe2O3 and Its Chitosan Composites for the Removal of Heavy Metal Ions

NH2-Fe2O3 and NH2-Fe2O3/chitosan (NH2-Fe2O3/CS) with excellent physical properties and high adsorption capacities for several heavy metal ions were synthesized using a one-pot hydrothermal method. The materials were characterized by scanning electron microscopy (SEM), electron dispersive spectroscopy (EDS), transmission electron microscopy (TEM), and X-ray diffraction (XRD). Physicochemical properties were determined by the Fourier transform infrared spectra (FTIR) and nitrogen adsorption analysis (Brunauer–Emmett–Teller (BET) method). The results of the characterization studies show that the material is uniformly dispersed and has good crystallinity and well-defined porous particles. The material is mesoporous, and the particles have a specific surface area of 55.41–233.03 m2·g−1, a total pore volume of 0.24–0.54 cm3·g−1, and a diameter of 3.83–17.56 nm. Additional results demonstrate that NH2-Fe2O3 and NH2-Fe2O3/CS are effective adsorbents for the removal of heavy metal ions from solution. In a ternary system, the order of their selective adsorption was determined to be Pb(II) > Cu(II) > Cd(II), and the adsorption rate of Pb(II) was much higher than that of Cu(II) and Cd (II). The metal ion adsorption capacity of NH2-Fe2O3 and NH2-Fe2O3/CS makes them promising adsorbents for wastewater cleanup.

Magnetic hyperthermia therapy for the treatment of glioblastoma: a review of the therapy's history, efficacy and application in humans

Hyperthermia therapy (HT) is the exposure of a region of the body to elevated temperatures to achieve a therapeutic effect. HT anticancer properties and its potential as a cancer treatment have been studied for decades. Techniques used to achieve a localised hyperthermic effect include radiofrequency, ultrasound, microwave, laser and magnetic nanoparticles (MNPs). The use of MNPs for therapeutic hyperthermia generation is known as magnetic hyperthermia therapy (MHT) and was first attempted as a cancer therapy in 1957. However, despite more recent advancements, MHT has still not become part of the standard of care for cancer treatment. Certain challenges, such as accurate thermometry within the tumour mass and precise tumour heating, preclude its widespread application as a treatment modality for cancer. MHT is especially attractive for the treatment of glioblastoma (GBM), the most common and aggressive primary brain cancer in adults, which has no cure. In this review, the application of MHT as a therapeutic modality for GBM will be discussed. Its therapeutic efficacy, technical details, and major experimental and clinical findings will be reviewed and analysed. Finally, current limitations, areas of improvement, and future directions will be discussed in depth.

Mechanochemical Synthesis of Iron and Cobalt Magnetic Metal Nanoparticles and Iron/Calcium Oxide and Cobalt/Calcium Oxide Nanocomposites

We report an environmentally benign and cost-effective method to produce Fe and Co magnetic metal nanoparticles as well as the Fe/Cao and Co/CaO nanocomposites by using a novel, dry mechanochemical process. Mechanochemical milling of metal oxides with a suitable reducing agent resulted in the production of magnetic metal nanoparticles. The process involved grinding and consequent reduction of low-costing oxide powders, unlike conventional processing techniques involving metal salts or metal complexes. Calcium granules were used as the reducing agent. Magnetometry measurements were performed over a large range of temperatures, from 10 to 1273 K, to evaluate the Curie temperature, blocking temperature, irreversibility temperature, saturation magnetization, and coercivity. The saturation magnetizations of the iron and cobalt nanoparticles were found to be 191 and 102 emu g-1, respectively. The heating abilities of these nanoparticles suspended in several liquids under alternating magnetic fields were measured and the specific loss power was determined. Our results suggest that the dry mechanochemical process is a robust method to produce metallic nanoparticles and nanocomposites.

Ultrafine Highly Magnetic Fluorescent γ-Fe2O3/NCD Nanocomposites for Neuronal Manipulations

In this work, we describe a low-cost, two-step synthesis of composites of nitrogen-doped carbon quantum dots (NCDs) with γ-Fe2O3 (NCDs/γ-Fe2O3), which is based on a hydrothermal cum co-precipitation method. The product is a fine powder of particles having an average diameter of 9 ± 3 nm. The physical and chemical properties of NCDs/γ-Fe2O3 were studied, as well as the superconducting quantum interference device and Mossbauer analysis of the magnetic properties of these nanocomposites. The interaction of NCDs/γ-Fe2O3 nanocomposites with neuron-like cells was examined, showing efficient uptake and low toxicity. Our research demonstrates the use of the nanocomposites for imaging and for controlling the cellular motility. The NCDs/γ-Fe2O3 nanocomposites are promising because of their biocompatibility, photostability, and potential selective affinity, paving the way for multifunctional biomedical applications.

Anchoring of Ag6Si2O7 nanoparticles on α-Fe2O3 short nanotubes as a Z-scheme photocatalyst for improving their photocatalytic performances

Coupling two different semiconductors to form composite photocatalysts is the most significant method for environmental remediation. In this regard, tube-like α-Fe2O3/Ag6Si2O7 heterostructures are synthesized via anchoring p-type Ag6Si2O7 nanoparticles (NPs) on the surface of n-type α-Fe2O3 short nanotubes (SNTs) by conventional wet-chemical routes. α-Fe2O3 SNTs are firstly fabricated by a hydrothermal method with the assistance of dihydrogen phosphate and sulphate. Then, Ag6Si2O7 NPs are anchored on α-Fe2O3 SNTs by an in situ deposition method, and the α-Fe2O3/Ag6Si2O7 p-n heterostructures are finally obtained. The morphologies, crystal structure, photocatalytic performance and photocurrent properties of as-synthesized α-Fe2O3/Ag6Si2O7 heterostructures are investigated. Six organic dyes are used for determining the high-efficiency Z-scheme photocatalytic activities of the as-obtained photocatalysts under ultraviolet and visible light (mercury lamp, 300 W). Compared with pure α-Fe2O3 SNTs, the photocurrent intensity of the α-Fe2O3/Ag6Si2O7 heterostructures is improved 62 times. The enhanced significant photocatalytic performance of α-Fe2O3/Ag6Si2O7 heterostructures could be attributed to charge transfer between Ag6Si2O7 NPs and the charge separation between Ag6Si2O7 NPs and α-Fe2O3 SNTs. These composite heterostructures are proposed to be an example for the preparation of other composite silicate photocatalysts for practical application in environmental remediation issues.

Amine-modified magnetic iron oxide nanoparticle as a promising carrier for application in bio self-healing concrete

Self-healing mechanisms are a promising solution to address the concrete cracking issue. Among the investigated self-healing strategies, the biotechnological approach is distinguished itself by inducing the most compatible material with concrete composition. In this method, the potent bacteria and nutrients are incorporated into the concrete matrix. Once cracking occurs, the bacteria will be activated, and the induced CaCO₃ crystals will seal the concrete cracks. However, the effectiveness of a bio self-healing concrete strictly depends on the viability of bacteria. Therefore, it is required to protect the bacteria from the resulted shear forces caused by mixing and drying shrinkage of concrete. Due to the positive effects on mechanical properties and the high compatibility of metallic nanoparticles with concrete composition, for the first time, we propose 3-aminopropyltriethoxy silane-coated iron oxide nanoparticles (APTES-coated IONs) as a biocompatible carrier for Bacillus species. This study was aimed to investigate the effect of APTES-coated IONs on the bacterial viability and CaCO₃ yield for future application in the concrete structures. The APTES-coated IONs were successfully synthesized and characterized by transmission electron microscopy (TEM), X-ray powder diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The results show that the presence of 100 μg/mL APTES-coated IONs could increase the bacterial viability. It was also found that the CaCO₃-specific yield was significantly affected in the presence of APTES-coated IONs. The highest CaCO₃-specific yield was achieved when the cells were decorated with 50 μg/mL of APTES-coated IONs. This study provides new insights for the application of APTES-coated IONs in designing bio self-healing strategies.

Designed synthesis and surface engineering strategies of magnetic iron oxide nanoparticles for biomedical applications

Iron oxide nanoparticles (NPs) hold great promise for future biomedical applications because of their magnetic properties as well as other intrinsic properties such as low toxicity, colloidal stability, and surface engineering capability. Numerous related studies on iron oxide NPs have been conducted. Recent progress in nanochemistry has enabled fine control over the size, crystallinity, uniformity, and surface properties of iron oxide NPs. This review examines various synthetic approaches and surface engineering strategies for preparing naked and functional iron oxide NPs with different physicochemical properties. Growing interest in designed and surface-engineered iron oxide NPs with multifunctionalities was explored in in vitro/in vivo biomedical applications, focusing on their combined roles in bioseparation, as a biosensor, targeted-drug delivery, MR contrast agents, and magnetic fluid hyperthermia. This review outlines the limitations of extant surface engineering strategies and several developing strategies that may overcome these limitations. This study also details the promising future directions of this active research field.

Fabrication of core-shell structured magnetic nanocellulose base polymeric ionic liquid for effective biosorption of Congo red dye

Ionic liquids are considered to be a class of environmentally friendly compounds as combination of them with bioresource polymeric substances such as; cellulose, constitute emerging coating materials. Biosorption by polymeric ionic liquids exhibits an attractive green way that involves low cost and irrespective of toxicity. As a result, a novel polymeric ionic liquid has been developed by the reaction of one step synthesized Fe3O4-cellulose nanohybrid, epichlorohydrin and 1-methylimidazole and employed as a green sorbent for efficient biosorption of Congo red dye. Effective parameters on dye removing as well as their interactions were determined with response surface methodology (RSM). Congo red adsorption showed fast equilibrium time (11min) with maximum uptake of 131mgg(-1). Isotherm study revealed that Langmuir adsorption model can better describe dye adsorption behavior. Regeneration of the sorbent was performed with a mixture of methanol-acetone-NaOH (3.0molL(-1)) solution.

Magnetocontrollability of Fe7C3@C superparamagnetic nanoparticles in living cells

BACKGROUND

A new type of superparamagnetic nanoparticles with chemical formula Fe7C3@C (MNPs) showed higher value of magnetization compared to traditionally used iron oxide-based nanoparticles as was shown in our previous studies. The in vitro biocompatibility tests demonstrated that the MNPs display high efficiency of cellular uptake and do not affect cyto-physiological parameters of cultured cells. These MNPs display effective magnetocontrollability in homogeneous liquids but their behavior in cytoplasm of living cells under the effect of magnetic field was not carefully analyzed yet.

RESULTS

In this work we investigated the magnetocontrollability of MNPs interacting with living cells in permanent magnetic field. It has been shown that cells were capable of capturing MNPs by upper part of the cell membrane, and from the surface of the cultivation substrate during motion process. Immunofluorescence studies using intracellular endosomal membrane marker showed that MNP agglomerates can be either located in endosomes or lying free in the cytoplasm. When attached cells were exposed to a magnetic field up to 0.15 T, the MNPs acquired magnetic moment and the displacement of incorporated MNP agglomerates in the direction of the magnet was observed. Weakly attached or non-attached cells, such as cells in mitosis or after cytoskeleton damaging treatments moved towards the magnet. During long time cultivation of cells with MNPs in a magnetic field gradual clearing of cells from MNPs was observed. It was the result of removing MNPs from the surface of the cell agglomerates discarded in the process of exocytosis.

CONCLUSIONS

Our data allow us to conclude for the first time that the magnetic properties of the MNPs are sufficient for successful manipulation with MNP agglomerates both at the intracellular level, and within the whole cell. The structure of the outer shells of the MNPs allows firmly associate different types of biological molecules with them. This creates prospects for the use of such complexes for targeted delivery and selective removal of selected biological molecules from living cells.

Synthesis, characterization and in vitro evaluation of exquisite targeting SPIONs-PEG-HER in HER2+ human breast cancer cells

A stable, biocompatible and exquisite SPIONs-PEG-HER targeting complex was developed. Initially synthesized superparamagnetic iron oxide nanoparticles (SPIONs) were silanized using 3-aminopropyltrimethoxysilane (APS) as the coupling agent in order to allow the covalent bonding of polyethylene glycol (PEG) to the SPIONs to improve the biocompatibility of the SPIONs. SPIONs-PEG were then conjugated with herceptin (HER) to permit the SPIONs-PEG-HER to target the specific receptors expressed over the surface of the HER2+ metastatic breast cancer cells. Each preparation step was physico-chemically analyzed and characterized by a number of analytical methods including AAS, FTIR spectroscopy, XRD, FESEM, TEM, DLS and VSM. The biocompatibility of SPIONs-PEG-HER was evaluated in vitro on HSF-1184 (human skin fibroblast cells), SK-BR-3 (human breast cancer cells, HER+), MDA-MB-231 (human breast cancer cells, HER-) and MDA-MB-468 (human breast cancer cells, HER-) cell lines by performing MTT and trypan blue assays. The hemolysis analysis results of the SPIONs-PEG-HER and SPIONs-PEG did not indicate any sign of lysis while in contact with erythrocytes. Additionally, there were no morphological changes seen in RBCs after incubation with SPIONs-PEG-HER and SPIONs-PEG under a light microscope. The qualitative and quantitative in vitro targeting studies confirmed the high level of SPION-PEG-HER binding to SK-BR-3 (HER2+ metastatic breast cancer cells). Thus, the results reflected that the SPIONs-PEG-HER can be chosen as a favorable biomaterial for biomedical applications, chiefly magnetic hyperthermia, in the future.

Alkali metal ion induced cube shaped mesoporous hematite particles for improved magnetic properties and efficient degradation of water pollutants

Alkali metal ion induced cube shaped mesoporous α-Fe₂O₃particles showed improved magnetic properties and efficient photo-Fenton degradation of methylene blue.

Recent progress on magnetic iron oxide nanoparticles: synthesis, surface functional strategies and biomedical applications

This review focuses on the recent development and various strategies in the preparation, microstructure, and magnetic properties of bare and surface functionalized iron oxide nanoparticles (IONPs); their corresponding biological application was also discussed. In order to implement the practical in vivo or in vitro applications, the IONPs must have combined properties of high magnetic saturation, stability, biocompatibility, and interactive functions at the surface. Moreover, the surface of IONPs could be modified by organic materials or inorganic materials, such as polymers, biomolecules, silica, metals, etc. The new functionalized strategies, problems and major challenges, along with the current directions for the synthesis, surface functionalization and bioapplication of IONPs, are considered. Finally, some future trends and the prospects in these research areas are also discussed.