Huaya (Melicoccus bijugatus) seed flour as a new source of starch: physicochemical, morphological, thermal and functional characterization

Effect of clays incorporation on properties of thermoplastic starch/clay composite bio-based polymer blends

In this study, thermoplastic starch (TPS) biofilms were developed using starch isolated from the seeds of Melicoccus bijugatus (huaya) and reinforced with bentonite clays at concentrations of 1%, 3%, and 5% by weight. Novelty of this research lies in utilizing a non-conventional starch source and enhancing properties of TPS through clay reinforcement. FTIR analysis verified bentonite's nature of clays, while SEM analysis provided insights into morphology and agglomeration behavior. Key findings include a notable increase in biofilm thickness and elastic modulus with higher clay content. Specifically, tensile strength of biofilms improved from 2.5 MPa for pure TPS to 5.0 MPa with 5% clay reinforcement. The elastic modulus increased from 25 MPa (TPS) to 60 MPa (5% clay). Thermal stability also showed enhancement, with initial degradation temperature increasing from 110 °C for pure TPS to 130 °C for TPS with 5% clay. Water vapor permeability (WVP) tests demonstrated a decrease in WVP values from 4.11 × 10-10 g m-1 s-1 Pa-1 for pure TPS to 2.09 × 10-10 g m-1 s-1·Pa-1 for TPS with 5% clay, indicating a significant barrier effect due to clay dispersion. These results suggest that biofilms based on huaya starch and reinforced with bentonite clay have considerable potential for sustainable food packaging applications, offering enhanced mechanical and barrier properties.

Ultrasound-Assisted Extraction of Mango (Mangifera indica) Kernel Starch: Chemical, Techno-Functional, and Pasting Properties

(1) Background: Starch is the main component of mango (Mangifera indica) kernel, making it an alternative to obtain an ingredient from a non-conventional source with potential application in food and other industrial applications; however, reports on the use of new extraction techniques for this material are scarce. The main objective of this research was to evaluate the effect of ultrasound-assisted extraction (UAE) on the yield, chemical, techno-functional, rheological, and pasting properties of starch isolated from a non-conventional source such as a mango kernel. (2) Methods: Different power sonication conditions (120, 300, and 480 W) and sonication time (10, 20, and 30 min) were evaluated along with a control treatment (extracted by the wet milling method). (3) Results: Ultrasound-assisted extraction increases starch yield, with the highest values (54%) at 480 W and 20 min. A significant increase in the amylose content, water-holding capacity, oil-holding capacity, solubility, and swelling power of ultrasonically extracted starches was observed. Similarly, mango kernel starch (MKS) exhibited interesting antioxidant properties. The sol-gel transition temperature and pasting parameters, such as the breakdown viscosity (BD) and the setback viscosity (SB), decreased with ultrasound application; (4) Conclusion: indicating that ultrasound caused changes in physical, chemical, techno-functional, rheological, and pasting properties, depending on the power and time of sonication, so it can be used as an alternative starch extraction and modification technique, for example, for potential application in thermally processed food products such as baked goods, canned foods, and frozen foods.

A Novel Starch from Talisia floresii Standl Seeds: Characterization of Its Physicochemical, Structural and Thermal Properties

Colok seed (Talisia floresii Standl) represents 80% of the total fruit weight and is obtained from trees that grow mainly in Yucatan Peninsula. The aim of this work was the physicochemical characterization from colok starch seeds as an alternative to conventional sources and to identify its characteristics for potential applications in different industrial sectors. Starch yield was 42.1% with low levels of lipids, ashes and fibers. The amylose content was 33.6 ± 1.15%. The gelatinization temperature was 85 ± 0.25 °C. Color analysis resulted in a starch with an intermediate luminosity, reflecting a dark color. Finally, in morphology, starch granule exhibited an average size of 18.7 μm, spherical, uniform and without fractures. Overall results demonstrated that isolated colok starch can be used in food products that require high processing temperatures, such as sauces, cookies, noodles, bread and food packages.

Physicochemical, Mechanical, and Structural Properties of Bio-Active Films Based on Biological-Chemical Chitosan, a Novel Ramon (Brosimum alicastrum) Starch, and Quercetin

The properties of biological-chemical chitosan (BCh) films from marine-industrial waste and a non-conventional Ramon starch (RS) (Brosimum alicastrum) were investigated. Blended films of BCh/RS were prepared to a volume ratio of 4:1 and 1:4, named (BChRS-80+q, biological-chemical chitosan 80% v/v and Ramon starch, BChRS-20+q, biological-chemical chitosan 20% v/v and Ramon starch, both with quercetin), Films from commercial chitosan (CCh) and corn starch (CS), alone or blended (CChCS-80+q, commercial chitosan 80% v/v and corn starch, CChCS-20+q commercial chitosan 20% v/v and corn starch, both with quercetin) were also prepared for comparison purposes. Films were investigated for their physicochemical characteristics such as thickness, moisture, swelling, water-vapor permeability, and water solubility. In addition, their mechanical and structural properties were studied using Fourier Transform Infrared Spectroscopy (FTIR), Thermogravimetric analysis (TGA) and Scanning Electron Microscopy (SEM) techniques. Antioxidant activity was evaluated as radical scavenging, and antimicrobial effect was also determined. The BCh and RS films presented similar tensile strength values compared with commercial biopolymers. Only films with chitosan presented antioxidant and antimicrobial activity. The FTIR spectra confirmed the interactions between functional groups of the biopolymers. Although, BChRS-80+q and BChRS-20+q films exhibited poor mechanical performance compared to their commercial counterparts, they showed good thermal stability, and improved antioxidant and antimicrobial activity in the presence of quercetin. BChRS-80+q and BChRS-20+q films have promising applications due to their biological activity and mechanical properties, based on a novel material that has been underutilized (Ramon starch) that does not compete with materials for human feeding and may be used as a coating for food products.

Sustainable Management of Organic Waste and Recycling for Bioplastics: A LCA Approach for the Italian Case Study

The collection of the organic fraction in Italy recorded significant growth in the decade 2010–2019 (+74%) due to both the increase in the spread of separate waste collection as well as the increase in the biological treatment plants of municipal waste. However, within the organic fraction there remains a share of non-compostable material (NCM) (plastic, glass, aluminum, etc.), equal to ~5% of the total, which affects the efficiency of composting practices as well as decreasing both the yield and the quality of the final compost, causing a portion of organic material to be subtracted from composting and ending up in landfills. Therefore, the purpose of this work is to evaluate how the sustainability of the organic fraction collection and the amount of compost obtained in the composting plants could improve, following the use of biodegradable and compostable bioplastic bags (shoppers), in replacement for conventional plastic ones. The Life Cycle Assessment (LCA) and Carbon Footprint (CF) methodology was used for the assessment, comparing two different scenarios based on data relating to the collection of the organic fraction in Italy in 2019. Scenario 1 relates to the composting of organic material that also contains plastics, bioplastics, and non-compostable materials, while in scenario 2 the share of plastic material in the first scenario has been entirely replaced by bioplastics. The results show that scenario 2 assumes the lowest values for 15 impact categories out of the 18 analyzed, and, among these, in three categories it assumes negative values: ozone formation-terrestrial ecosystems (−1.64 × 10−2 kg NOX eq), ozone formation-human health (−8.50 × 10−3 kg NOX eq), and fossil resource scarcity (−4.91 × 102 kg oil eq). Furthermore, scenario 2 has a negative carbon footprint (−3.80 kg CO2 eq) compared to scenario 1 (79.71 kg CO2 eq), and in general it is the most sustainable scenario as a direct consequence of the greater amount of compost obtained (307.4 kg vs. 269.2 kg).

Physicochemical properties of a new starch from ramie (Boehmeria nivea) root

A new starch was isolated from ramie root, and its physicochemical properties were investigated. Ramie dry root contained 45.9% starch. Starch had truncated, ellipsoidal, and spherical granule shapes with size from 7 to 30 μm and D[4,3] about 14.1 μm. Starch contained 38.9% apparent amylose content and 22.4% true amylose content, exhibited B-type crystallinity, and had 26.6% relative crystallinity, 0.82 ordered degree, and 9.2 nm lamellar thickness. Starch had 71.8 °C gelatinization peak temperature and 15.6 J/g gelatinization enthalpy, and exhibited 31.4 g/g swelling power and 17.1% water solubility at 95 °C. Starch had peak, hot, breakdown, final, and setback viscosities at 3048, 2768, 279, 4165, and 1397 mPa s, respectively, and showed peak time at 4.36 min and pasting temperature at 75.0 °C. The native, gelatinized, and retrograded starches contained 15.1%, 94.0%, and 86.5% rapidly digestible starch and 83.3%, 4.0%, and 10.7% resistant starch, respectively. Compared with potato and rice starches, ramie starch was somewhat similar to potato starch but significantly different from rice starch in starch component, crystalline structure, and functional properties. Therefore, ramie starch exhibited the potential to be used as a thickening agent, resistant-digesting food additive, and alternative to potato starch in food and nonfood industries.