Microencapsulation and accelerated stability testing of bioactive compounds of Hibiscus sabdariffa

Microencapsulation of Hibiscus sabdariffa L. extract using porous starch and gum Arabic: Optimized process, characterization, stability, and simulated gastrointestinal conditions

Hibiscus extract exhibits considerable antioxidant activity and a high anthocyanin content, which suggesting potential health benefits. However, these compounds are highly susceptible to environmental factors. The aim of this study was to establish the optimal conditions for the encapsulation of Hibiscus sabdariffa extract (HSE) using mixed porous maize starch-gum Arabic to enhance the stability of bioactive compounds under accelerated aging conditions. Response surface methodology (RSM) was used to optimize microencapsulation conditions through spray drying. The optimal conditions for microencapsulation of HSE by RSM were determined to be 126 °C at the inlet temperature (IT) and 8.5 % at the total solid content (TSC). Using these conditions, the amount of bioactive compounds in optimized microcapsules (OMs) was 2368 mg GAE/100 g, 694 mg QE/100 g, and 930 mg EC3G/100 g, of phenolic compounds, flavonoids, and anthocyanin, respectively. The release rate of anthocyanins during in vitro digestion was more effectively regulated in the OM sample, which retained up to 40 % of anthocyanins compared with 10 % in the HSE. The experimental values in this study exhibit high assertiveness, which renders the optimization model technologically and financially viable for the encapsulation of bioactive compounds with potential use in the food and pharmaceutical industries.

Development of Cyclodextrin-Based Mono and Dual Encapsulated Powders by Spray Drying for Successful Preservation of Everlasting Flower Extract

The study aimed to develop encapsulation systems to maintain the preservation of everlasting (Helichrysum plicatum) flower extract polyphenols. Spray-dried encapsulates were formulated using β-cyclodextrin (BCD) and 2-hydroxypropyl-β-cyclodextrin (HPBCD) as supramolecular hosts, and their macromolecule mixtures with the conventional carriers, maltodextrin (MD) and whey protein (WP). The obtained microparticles were comparatively assessed regarding technological, physicochemical, and phytochemical properties. The highest yields were achieved by combining cyclodextrins with whey protein (73.96% for WP+BCD and 75.50% for WP+HPBCD compared to 62.48% of pure extract). The extract-carrier interactions and thermal stability were evaluated by FTIR and DSC analysis, suggesting successful entrapment within the carriers. Carriers reduced the particle diameter (3.99 to 4.86 μm compared to 6.49 μm of pure extract), classifying all encapsulates as microsystems. Carrier blends made the particle size distribution uniform, while SEM analysis revealed the production of more spherical and less aggregated particles. The HPBCD provided the highest encapsulation efficiency, with the highest content of detected aglycones and slightly lower values of their glycosylated forms. An analysis of the dual macromolecule encapsulation systems revealed the highest bioactive preservation potential for SHE+MD+BCD and SHE+WP+HPBCD. Overall, macromolecule combinations of cyclodextrins and conventional biopolymers in the spray-drying process can enhance the functional properties of H. plicatum extract.

Fabrication of biopolymer stabilized microcapsules for enhancing physicochemical stability, antioxidant and antimicrobial properties of cinnamon essential oil

The current study entails the encapsulation validity to enclose naturally occurring food preservatives, such as cinnamon essential oil (CM), within various wall materials. This approach has demonstrated enhanced encapsulated compounds' stability, efficiency, and bioactivity. The base carrier system consisted of a solid lipid (Berry wax, RW) individually blended with whey protein (WYN), maltodextrin (MDN), and gum Arabic (GMC) as wall materials. The resulting formulations were freeze-dried: WYN/RW/CM, MDN/RW/CM, and GMC/RW/CM. The study comprehensively analyzed encapsulation efficiency, morphology, crystallinity, thermal, and physiochemical properties. When RW was combined with WYN, MDN, and GMC, the microcapsule WYN/RW/CM showed the highest efficiency at 93.4 %, while the GMC/RW/CM exhibited the highest relative crystallinity at 46.54 %. Furthermore, the investigation assessed storage stability, release of bioactive compounds, and oxidative stability during storage at 4 °C/ 25 % RH ± 5 % and 25 °C/40 % RH ± 5 % for 55 days, revealing optimal stability in the WYN/RW/CM microcapsule. Additionally, the antimicrobial activity was assessed at various concentrations of microcapsules, revealing their inhibitory effect against Escherichia coli (gram-negative) and Staphylococcus aureus (gram-positive) bacteria. The WYN/RW/CM microcapsule exhibited the highest inhibition activity in both strains, reaching 40 mm. This study demonstrates that combining WYN with RW as a wall material has greater efficiency in encapsulation and potential uses in various industrial sectors.

Characterization of Grape Pomace Extract Microcapsules: The Influence of Carbohydrate Co-Coating on the Stabilization of Goat Whey Protein as a Primary Coating

Both grape pomace and whey are waste products from the food industry that are rich in valuable ingredients. The utilization of these two by-products is becoming increasingly possible as consumer awareness of upcycling increases. The biological activities of grape pomace extract (GPE) are diverse and depend on its bioavailability, which is influenced by processes in the digestive system. In this work, goat whey protein (GW) was used as the primary coating to protect the phenolic compounds of GPE during the spray drying process. In addition, trehalose (T), sucrose (S), xylose (X), and maltodextrin (MD) were added to the goat whey proteins as co-coatings and protein stabilizers. All spray drying experiments resulted in microcapsules (MC) with a high encapsulation efficiency (77.6-95.5%) and yield (91.5-99.0%) and almost 100% recovery of phenolic compounds during the release test. For o-coumaric acid, the GW-coated microcapsules (MC) showed a bioavailability index of up to 731.23%. A semi-crystalline structure and hydrophilicity were characteristics of the MC coated with 10% T, S, X, or 5% MD. GW alone or in combination with T, S, MD, or X proved to be a promising carrier for polyphenols from grape pomace extract and ensured good bioavailability of these natural antioxidants.

Impact of Processing and Physicochemical Parameter on Hibiscus sabdariffa Calyxes Biomolecules and Antioxidant Activity: From Powder Production to Reconstitution

Hibiscus sabdariffa is a tropical plant with red calyxes whose anthocyanins, phenols, and antioxidant activity make it attractive to consumers both from a nutritional and medicinal standpoint. Its seasonality, perishability, and anthocyanin instability, led to the setup of stabilization methods comprising drying and powdering. However, its properties can often be altered during these stabilization processes. Treatments such as dehumidified-air-drying, infrared drying, and oven-drying, and their combination showed better quality preservation. Moreover, powder production enables superior biomolecule extractability which can be linked to a higher bioaccessibility. However, the required temperatures for powder production increase the bioactive molecules degradation leading to their antioxidant activity loss. To overcome this issue, ambient or cryogenic grinding could be an excellent method to improve the biomolecule bioavailability and accessibility if the processing steps are well mastered. To be sure to benefit from the final nutritional quality of the powder, such as the antioxidant activity of biomolecules, powders have to offer excellent reconstitutability which is linked to powder physicochemical properties and the reconstitution media. Typically, the finest powder granulometry and using an agitated low-temperature reconstitution media allow for improving anthocyanin extractability and stability. In this review, the relevant physicochemical and processing parameters influencing plant powder features from processing transformation to reconstitution will be presented with a focus on bioactive molecules and antioxidant activity preservation.

Microencapsulates of Blue Maize Polyphenolics as a Promising Ingredient in the Food and Pharmaceutical Industry: Characterization, Antioxidant Properties, and In Vitro-Simulated Digestion

An anthocyanin-rich blue maize waste product was used for anthocyanin extraction. To preserve bioactive phenolic compounds, a spray-drying technique was employed using conventional wall material maltodextrin (MD), with novel one, hydroxypropyl-β-cyclodextrin (HPBCD). The obtained spray-dried maize extract (SME) and microencapsulates were analyzed based on physicochemical powder properties, chemical analysis, antioxidant activity, and digestibility. The examined microencapsulates demonstrated good powder properties, exhibited a high powder yield (up to 83%), and had a low moisture content (less than 5%). HPBCD and MD + HPBCD combinations demonstrated superior powder properties in the terms of decreasing the time necessary for rehydration (133.25 and 153.8 s, respectively). The mean average particle diameter ranged from 4.72 to 21.33 µm. DSC analyses signified high powder thermal stability, around 200 °C, related to the increasing preservation with biopolymer addition. The total phenolic and anthocyanin compounds ranged from 30,622 to 32,211 mg CE/kg (CE-catechin equivalents) and from 9642 to 12,182 mg CGE/kg (CGE-cyanidin 3-glucoside equivalents), respectively, associated with good bioactive compound protection. Microencapsulates with both carriers (15% MD and 15% HPBCD) had the highest digestibility (73.63%). Our results indicated that the microencapsulates created with the active ingredient and the wall materials (MD and HPBCD) could protect phenolic compounds/anthocyanins against ABTS radicals (63.53 and 62.47 mmol Trolox Eq/kg, respectively).

Encapsulation of bioactive compounds extracted from plants of genus Hibiscus: A review of selected techniques and applications

The genus Hibiscus includes more than 250 species, and many studies showed that these plants contain bioactive compounds with technological potential to be used in the development of functional foods. However, the instability of these compounds during typical food processing conditions, such as exposure to high temperatures, pH changes and presence of light and oxygen have stimulated the use of encapsulation techniques to increase their stability and applicability. Among the existing Hibiscus species, only H. sabdariffa, H. cannabinus, and H. acetosella have been investigated in encapsulation studies, being spray drying the most common method approached. Considering the high technological potential offered by the incorporation of encapsulated bioactive compounds from plants of the genus Hibiscus in food formulations, this review discusses key information of selected encapsulation techniques, which represents promising alternatives to increase food systems' stability and stimulate the design of new functional foods. Relevant gaps in the literature were also noticed, mainly the lack of systematic studies regarding the composition of bioactive compounds after encapsulation, instead of total determinations, and biological activities in different analytical systems, such as antioxidant, antimicrobial and anti-inflammatory properties as well as bioaccessibility and bioavailability.

A Review of the Current Knowledge of Thermal Stability of Anthocyanins and Approaches to Their Stabilization to Heat

Anthocyanins are colored valuable biocompounds, of which extraction increases globally, although functional applications are restrained by their limited environmental stability. Temperature is a critical parameter of food industrial processing that impacts on the food matrix, particularly affecting heat-sensitive compounds such as anthocyanins. Due to the notable scientific progress in the field of thermal stability of anthocyanins, an analytical and synthetic integration of published data is required. This review focuses on the molecular mechanisms and the kinetic parameters of anthocyanin degradation during heating, both in extracts and real food matrices. Several kinetic models (Arrhenius, Eyring, Ball) of anthocyanin degradation were studied. Crude extracts deliver more thermally stable anthocyanins than purified ones. A different anthocyanin behavior pattern within real food products subjected to thermal processing has been observed due to interactions with some nutrients (proteins, polysaccharides). The most recent studies on the stabilization of anthocyanins by linkages to other molecules using classical and innovative methods are summarized. Ensuring appropriate thermal conditions for processing anthocyanin-rich food will allow a rational design for the future development of stable functional products, which retain these bioactive molecules and their functionalities to a great extent.