Dispersive micro-solid-phase extraction using chitosan/polymethacrylate/clay bionanocomposite followed by UV–Vis spectrophotometry for determination of zinc

A thin biofilm of chitosan as a sorptive phase in the rotating disk sorptive extraction of triclosan and methyl triclosan from water samples

The features and nature of the sorptive phase may be the stage that determines the scope of microextraction techniques. In search of new alternatives, materials of natural origin have recently been explored to establish greener analytical strategies. Based on that search, this research proposes the use of chitosan as a sorptive phase, which was assessed in the rotating disk sorptive extraction of emerging contaminants from aqueous systems. Chitosan is a biopolymer of animal origin that is usually found in the shells of crustaceans. The main characteristic of this material is the presence of a high number of nitrogenous groups, which gives it high reactivity, but its main disadvantage is associated with its high swelling capacity. In this research, chitosan was crosslinked with a low concentration of glutaraldehyde to form thin films that were easily immobilized on the surface of the rotating disk. The main advantage of this modification is the considerable decrease in the swelling capacity, which prevents loss and rupture of the sorbent during high rotation of the disk. In addition, it not only improved the physical characteristics of chitosan but also increased its extraction capacity. With regard to its use as a sorptive phase, all the variables associated with the microextraction of the analytes were studied, and optimal variables were found to be: pH 4, 20% NaCl (salting out effect), 30-45 min as equilibrium time and elution of analytes with a mixture of methanol:ethyl acetate (1:1). Validation of the methodology for the determination of methyl triclosan and triclosan was carried out, and relative recoveries between 89 and 96% and relative standard deviations less than 14% were found. The detection limits were 0.11 and 0.20 μg L^-1, respectively. Through its application in real samples (natural and residual waters), triclosan was quantified between 0.7 and 1.3 μg L^-1. Finally, the "green" properties of the phase were evaluated, demonstrating that it is reusable for at least three cycles and biodegradable. Compared to its efficiency with a commercial phase (in this case, the styrene divinyl benzene phase), the proposed biosorbent provided a similar and even higher sorptive capacity (depending on the analyte).

A Critical Review of Analytical Applications of Chitosan as a Sustainable Chemical with Functions Galore

Biomass and biowastes stand as sustainable and cost-effective environmentally benign alternative feedstock. Chitosan is a biocompatible, bioactive, and biodegradable biopolymer derived from chitin to achieve eight aspects out of the 12 green chemistry principles. Chitosan got significant attention in several fields including chemical analysis, in addition to chemical functionally, which enabled its use as adsorbent and its structural crosslinking using various crosslinkers. The physicochemical, technological, and optical properties of chitosan have been extensively exploited in analysis. Mainly, deacetylation degree and molecular weight are controlling its properties and hence controlling its functions. This review presents a structure, properties, and functions relationships of chitosan. It also aims to provide an overview of the different functions that chitosan can serve in each analytical technique such as supporting matrix, catalyst…etc. The contribution of chitosan in improving the ecological performance is discussed in each technique.

Chitosan and dicationic ionic liquid intercalated clay-coated solid-phase microextraction fiber for determination of sixteen polycyclic aromatic hydrocarbons in coffee and tea samples

In the present study, solid-phase microextraction (SPME) fiber was prepared by coating clay (MMT)-chitosan (CH) and dicationic ionic liquid (DIL) onto the stainless-steel wire step by step. The characterization of fibers was performed by Fourier transform infrared spectroscopy, thermal analysis, x-ray diffraction analysis, and scanning electron microscopy. The prepared fibers were evaluated for separation and determination of 16 polycyclic aromatic hydrocarbons (PAHs) in coffee and tea samples in headspace- and direct immersion-SPME by coupling with gas chromatography/mass spectrometry. The analytical performance of MMT/CH/DIL fibers was carried out for the extraction of PAHs and compared with the performance of carboxen/polydimethylsiloxane (CAR/PDMS) and divinylbenzene/CAR/PDMS (DVB/CAR/PDMS) fibers under optimized conditions. The wider linear ranges between 0.001 and 25 μg L^-1 with a coefficient of determination above 0.9962, low limits of detection between 0.0001 and 0.05 μg L^-1 and good intra-day repeatability from 2.45 to 6.48 % and fiber-to-fiber reproducibility from 3.19 % to 8.82 % were obtained for all PAHs in both methods with MMT/CH/octyl (O)-DIL fiber. The extraction recoveries of coffee and tea samples ranged from 87.5 to 112 % using the MMT/CH/O-DIL fiber in both SPME methods.

Application of polysaccharide biopolymers as natural adsorbent in sample preparation

Preparing samples for analyses is perhaps the most important part to analyses. The varied functional groups present on the surface of biopolymers bestow them appropriate adsorption properties. Properties like biocompatibility, biodegradability, presence of different surface functional group, high porosity, considerable absorption capacity for water, the potential for modification, etc. turn biopolymers to promising candidates for varied applications. In addition, one of the most important parts of determination of an analyte in a matrix is sample preparation step and the efficiency of this step in solid phase extraction methods is largely dependent on the type of adsorbent used. Due to the unique properties of biopolymers they are considered an appropriate choice for using as sorbent in sample preparation methods that use from a solid adsorbent. Many review articles have been published on the application of diverse adsorbents in sample preparation methods, however despite the numerous advantages of biopolymers mentioned; review articles in this field are very few. Thus, in this paper we review the reports in different areas of sample preparation that use polysaccharides-based biopolymers as sorbents for extraction and determination of diverse organic and inorganic analytes.