Synthesis and applications of metal oxide derivatives of ZIF-67: a mini-review

Machine learning powered CN-coordinated cobalt nanoparticles embedded cellulosic nanofibers to assess meat quality via clenbuterol monitoring

The World Anti-Doping Agency (WADA) has prohibited the use of clenbuterol (CLN) because it induces anabolic muscle growth while potentially causing adverse effects such as palpitations, anxiety, and muscle tremors. Thus, it is vital to assess meat quality because, athletes might have positive test for CLN even after consuming very low quantity of CLN contaminated meat. Numerous materials applied for CLN monitoring faced potential challenges like sluggish ion transport, non-uniform ion/molecule movement, and inadequate electrode surface binding. To overcome these shortcomings, herein we engineered bimetallic zeolitic imidazole framework (BM-ZIF) derived N-doped porous carbon embedded Co nanoparticles (CN-CoNPs), dispersed on conductive cellulose acetate-polyaniline (CP) electrospun nanofibers for sensitive electrochemical monitoring of CLN. Interestingly, the smartly designed CN-CoNPs wrapped CP (CN-CoNPs-CP) electrospun nanofibers offers rapid diffusion of CLN molecules to the sensing interface through amine and imine groups of CP, thus minimizing the inhomogeneous ion transportation and inadequate electrode surface binding. Additionally, to synchronize experiments, machine learning (ML) algorithms were applied to optimize, predict, and validate voltametric current responses. The ML-trained sensor demonstrated high selectivity, even amidst interfering substances, with notable sensitivity (4.7527 μA/μM/cm2), a broad linear range (0.002-8 μM), and a low limit of detection (1.14 nM). Furthermore, the electrode exhibited robust stability, retaining 98.07% of its initial current over a 12-h period. This ML-powered sensing approach was successfully employed to evaluate meat quality in terms of CLN level. To the best of our knowledge, this is the first study of using ML powered system for electrochemical sensing of CLN.

Recent advances and synergistic effect of bioactive zeolite imidazolate frameworks (ZIFs) for biosensing applications

The rapid developments in the field of zeolitic imidazolate frameworks (ZIFs) in recent years have created unparalleled opportunities for the development of unique bioactive ZIFs for a range of biosensor applications. Integrating bioactive molecules such as DNA, aptamers, and antibodies into ZIFs to create bioactive ZIF composites has attracted great interest. Bioactive ZIF composites have been developed that combine the multiple functions of bioactive molecules with the superior chemical and physical properties of ZIFs. This review thoroughly summarizes the ZIFs as well as the novel strategies for incorporating bioactive molecules into ZIFs. They are used in many different applications, especially in biosensors. Finally, biosensor applications of bioactive ZIFs were investigated in optical (fluorescence and colorimetric) and electrochemical (amperometric, conductometric, and impedance) fields. The surface of ZIFs makes it easier to immobilize bioactive molecules like DNA, enzymes, or antibodies, which in turn enables the construction of cutting-edge, futuristic biosensors.

CRISPR/Cas12a trans-cleavage mediated photoelectrochemical biosensor based on zeolitic imidazolate framework-67 for ATP determination

An efficient PEC biosensor is proposed for ATP detection based on exciton energy transfer from CdTe quantum dots (CdTe QDs) to Au nanoparticles (AuNPs), integrating CRISPR/Cas12a trans-cleavage activity and specific recognition of ZIF-67 to ATP. Exciton energy transfer between CdTe QDs and AuNPs system is firstly constructed as photoelectrochemical (PEC) sensing substrate. Then, the activator DNAs, used to activate CRISPR/Cas12a, are absorbed on the surface of ZIF-67. In the presence of ATP, the activator DNAs are released due to more efficient adsorption of ZIF-67 to ATP. The released activator DNA activates trans-cleavage activity of CRISPR/Cas12a to degrade ssDNA on the electrode, leading to the recovery of photocurrent due to the interrupted energy transfer. Benefiting from the specific recognition of ZIF-67 to ATP and CRISPR/Cas12a-modulated amplification strategy, the sensor is endowed with excellent specificity and high sensitivity.

Co3O4/activated carbon nanocomposites as electrocatalysts for the oxygen evolution reaction

The Oxygen Evolution Reaction (OER) is crucial in various processes such as hydrogen production via water splitting. Several electrocatalysts, including metal oxides, have been evaluated to enhance the reaction efficiency. Zeolitic Imidazolate Framework-67 (ZIF-67) has been employed as a precursor to produce Co3O4, showing high OER activity. Additionally, the formation of composites with carbon-based materials improves the activity of these materials. Thus, this work focuses on synthesizing ZIF-67 and commercial activated carbon (AC) composites, which were used as precursors to obtain Co3O4/C electrocatalysts by calculating ZIF-67/CX (X = 10, 30, and 50, the mass percentage of AC). The obtained materials were thoroughly characterized by employing X-ray powder diffraction (XRD), confirming the cobalt oxide structure with a sphere-like morphology as observed in the TEM images. The presence of oxygen vacancies was confirmed by infrared spectroscopy and EPR measurements. The electrocatalytic performance in the OER was investigated by linear sweep voltammetry (LSV), which revealed an overpotential of 325 mV at 10 mA cm-2 and a Tafel slope value of 65.32 mV dec-1 for Co3O4/C10, superior in activity to several previously reported studies in the literature and electrochemical stability of up to 8 hours. The reduced value of charge transfer resistance, high double-layer capacitance, and the presence of Co3+ ions justify the superior performance of the Co3O4/C10 electrocatalyst.

Synthesis of ZIF-8/ZnFe2O4/GO-OSO3H nanocomposite as a superior and reusable heterogeneous catalyst for the preparation of pyrimidine derivatives and investigation of their antimicrobial activities

In this report, we synthesized some pyrimidine derivatives by multi-component reaction of urea, benzaldehydes, and 1,3-indandione in the presence of ZIF-8/ZnFe2O4/GO-OSO3H nanocomposite under reflux conditions. Initially, graphene oxide was prepared from graphite, and then it was sulfonated using ClOSO3H. Next, GO-OSO3H nanosheets were used to support ZIF-8/ZnFe2O4 nanostructure. The construction of the synthesized structure was established using different spectral techniques such as X-ray crystallography (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX/Mapping), Fourier transform infrared (FTIR), thermal gravimetric analysis (TGA), vibrating sample magnetometer (VSM), and Brunauer-Emmett-Teller (BET). The present method provides various benefits including the efficiency of outcomes, easy separation of the catalyst, and excellent yield of the products within short reaction times. Moreover, the antibacterial activities of pyrimidine derivatives were investigated via the agar-well diffusion method on gram-negative (Escherichia coli) and gram-positive (Staphylococcus aureus) bacteria and the obtained results illustrated reasonable effects.

Tailoring the topology of ZIF-67 metal-organic frameworks (MOFs) adsorbents to capture humic acids

Chlorination is a versatile technique to combat water-borne pathogens. Over the last years, there has been continued research interest to abate the formation of chlorinated disinfection by-products (DBPs). To prevent hazardous DBPs in drinking water, it is decided to diminish organic precursors, among which humic acids (HA) resulting from the decomposition and transformation of biomass. Metal-organic frameworks (MOFs) such as zeolitic imidazolate frameworks (ZIFs) have recently received tremendous attention in water purification. Herein, customized ZIF-67 MOFs possessing various physicochemical properties were prepared by changing the cobalt source. The HA removal by ZIF-67-Cl, ZIF-67-OAc, ZIF-67-NO3, and ZIF-67-SO4 were 85.6%, 68.9%, 86.1%, and 87.4%, respectively, evidently affected by the specific surface area. HA uptake by ZIF-67-SO4 indicated a removal efficiency beyond 90% in 4  90% after 60 min mixing the solution with 0.3 g L-1 ZIF-67-SO4. Notably, an acceptable removal performance (∼72.3%) was obtained even at HA concentrations up to 100 mg L-1. The equilibrium data fitted well with the isotherm models in the order of Langmuir> Hill > BET> Khan > Redlich-Peterson> Jovanovic> Freundlich > and Temkin. The maximum adsorption capacity qm for HA uptake by ZIF-67-SO4 was 175.89 mg g-1, well above the majority of adsorbents. The pseudo-first-order model described the rate of HA adsorption by time. In conclusion, ZIF-67-SO4 presented promising adsorptive properties against HA. Further studies would be needed to minimize cobalt leaching from the ZIF-67-SO4 structure and improve its reusability safely, to ensure its effectiveness and the economy of adsorption system.

Hollow NiCo2O4-ZnO-Co3O4-/N-C Micro-Cage for Synergistic Bisphenol A Degradation by Activating Persulfate

The NiCo₂O₄-ZnO-Co₃O₄-/N-C micro-cage was successfully synthesized by calcination of the precursor obtained from a hollow ZIF-8/ZIF-67 with nickel nitrate. The preparation process concerning ion exchange and leaching was illustrated by the investigation of the composition and structure of the composites. As a catalyst for the activation of persulfate (PDS) to degrade bisphenol A (BPA), it was discovered that the BPA degradation in the presence of NiCo₂O₄-Co₃O₄-ZnO/N-C was more efficient than the solids obtained by ZIF-67 with nickel nitrate, indicated by the sevenfold increase of the apparent reaction rate. The further electrochemical analysis evidenced that the electron transfer was more easily accomplished in the system of BPA-PDS-NiCo₂O₄-Co₃O₄-ZnO/N-C. This enhanced activity of NiCo₂O₄-Co₃O₄-ZnO/N-C was mainly due to the hollow structure, the synergistic effect of NiCo₂O₄, as well as the smaller size of the active species, which facilitated the transportation of molecules and ions as well as the activation of PDS.

Microfluidic-Assisted Synthesis of Metal-Organic Framework -Alginate Micro-Particles for Sustained Drug Delivery

Drug delivery systems (DDS) are continuously being explored since humans are facing more numerous complicated diseases than ever before. These systems can preserve the drug's functionality and improve its efficacy until the drug is delivered to a specific site within the body. One of the least used materials for this purpose are metal-organic frameworks (MOFs). MOFs possess many properties, including their high surface area and the possibility for the addition of functional surface moieties, that make them ideal drug delivery vehicles. Such properties can be further improved by combining different materials (such as metals or ligands) and utilizing various synthesis techniques. In this work, the microfluidic technique is used to synthesize Zeolitic Imidazole Framework-67 (ZIF-67) containing cobalt ions as well as its bimetallic variant with cobalt and zinc as ZnZIF-67 to be subsequently loaded with diclofenac sodium and incorporated into sodium alginate beads for sustained drug delivery. This study shows the utilization of a microfluidic approach to synthesize MOF variants. Furthermore, these MOFs were incorporated into a biopolymer (sodium alginate) to produce a reliable DDS which can perform sustained drug releases for up to 6 days (for 90% of the full amount released), whereas MOFs without the biopolymer showed sudden release within the first day.

Multi-bioinspired hierarchical integrated hydrogel for passive fog harvesting and solar-driven seawater desalination

In recent years, with the outbreak and epidemic of the novel coronavirus in the world, how to obtain clean water from the limited resources has become an urgent issue of concern to all mankind. Atmospheric water harvesting technology and solar-driven interfacial evaporation technology have shown great potential in seeking clean and sustainable water resources. Here, inspired by a variety of organisms in nature, a multi-functional hydrogel matrix composed of polyvinyl alcohol (PVA), sodium alginate (SA) cross-linked by borax as well as doped with zeolitic imidazolate framework material 67 (ZIF-67) and graphene owning macro/micro/nano hierarchical structure has successfully fabricated for producing clean water. The hydrogel not only can reach the average water harvesting ratio up to 22.44 g g-1 under the condition of fog flow after 5 h, but also be capable of desorbing the harvested water with water release efficiency of 1.67 kg m-2 h-1 under 1 sun. In addition to excellent performance in passive fog harvesting, the evaporation rate over 1.89 kg m-2 h-1 is attained under 1 sun on natural seawater during long-term. This hydrogel indicates its potential in producing clean water resources in multiple scenarios in different dry or wet states, and which holds great promise for flexible electronic materials and sustainable sewage or wastewater treatment applications.

Enhancing Hydrogen Sulfide Detection at Room Temperature Using ZIF-67-Chitosan Membrane

Developing new materials for energy and environment-related applications is a critical research field. In this context, organic and metal-organic framework (MOF) materials are a promising solution for sensing hazardous gases and saving energy. Herein, a flexible membrane of the zeolitic imidazole framework (ZIF-67) mixed with a conductivity-controlled chitosan polymer was fabricated for detecting hydrogen sulfide (H₂S) gas at room temperature (RT). The developed sensing device remarkably enhances the detection signal of 15 ppm of H₂S gas at RT (23 °C). The response recorded is significantly higher than previously reported values. The optimization of the membrane doping percentage achieved exemplary results with respect to long-term stability, repeatability, and selectivity of the target gas among an array of several gases. The fabricated gas sensor has a fast response and a recovery time of 39 s and 142 s, respectively, for 15 ppm of H₂S gas at RT. While the developed sensing device operates at RT and uses low bias voltage (0.5 V), the requirement for an additional heating element has been eliminated and the necessity for external energy is minimized. These novel features of the developed sensing device could be utilized for the real-time detection of harmful gases for a healthy and clean environment.

2D/3D-Shaped Fe0.8Ni0.2S2/ZIF-67 as a Nanozyme for Rapid Measurement of H2O2 and Ascorbic Acid with a Low Limit of Detection

Metal-organic frameworks (MOFs) can be used as ideal artificial nanozymes for an open structure to transfer substances and products. The nanozymic mechanism of MOFs needs further investigation for wide application. In this manuscript, no peroxidase-like activity was found for ZIF-67 (a kind of MOF), however, it enhanced the peroxidase-like activity of the Fe_0.8Ni_0.2S₂/ZIF-67 composite, in which Fe_0.8Ni_0.2S₂ was the active composition. The catalytic constant (K_cat) is higher at 1.98 (for TMB) and 2.08 (for H₂O₂) times and the catalytic efficiency (K_cat/K_m) is higher at 3.13 (for TMB) and 2.67 (for H₂O₂) times, than those of Fe_0.8Ni_0.2S₂. The K_m value decreased about 85 times (for H₂O₂) for Fe_0.8Ni_0.2S₂/ZIF-67 than that of horseradish peroxidase (natural enzyme). The mechanism was proposed. The limit of detection of H₂O₂ for Fe_0.8Ni_0.2S₂/ZIF-67 is 0.039 μM, which is lower by about 18.2 times than that of Fe_0.8Ni_0.2S₂. Simultaneously, Fe_0.8Ni_0.2S₂/ZIF-67 was used to rapidly detect ascorbic acid for only 1.0 min in food monitoring. This study may be important to design a new kind of nanozyme.

Sensitive and Stable Electrochemical Sensor for Folic Acid Determination Using a ZIF-67/AgNWs Nanocomposite

An electrochemical sensor using silver nanowires (AgNWs)-doped with a zeolite-like metal-organic framework (ZIF-67) was developed for highly sensitive and stable determination of folic acid (FA). The ZIF-67/AgNWs nanocomposite was prepared by a one-step reaction via a template method and drop-coated onto the surface of a screen-printed carbon electrode (SPCE) to form a ZIF-67/AgNWs@SPCE electrochemical sensing platform. The electrochemical square wave voltammetry (SWV) curve for this sensing platform was measured in an electrolyte solution containing FA under the optimum experimental conditions. The redox peak current of FA (I_FA) increased with increases in the FA concentration (C_FA). There was a linear relationship between I_FA and C_FA in the range of 0.1 μM to 10 μM, and the determination limit was 30 nM. The ZIF-67/AgNWs@SPCE was used as an electrochemical sensor for FA which maintained a good stability over 7 days and showed good determination performance in real samples with a high recovery rate (100.9-102.1%, n = 6).