Spectroscopic and DFT evaluation of the positional effect of amino group on the properties of aminobenzenesulphonic acid: solvents interactions

Exploration of electronic and vibrational properties of sulfanilic acid through periodic and non-periodic DFT calculations

CONTEXT

The electronic, discrete water solvation, and vibrational properties of zwitterionic sulfanilic acid were thoroughly investigated using periodic and non-periodic DFT approaches. The periodic-DFT results, obtained by employing the PBE-TS functional (Perdew-Burke-Ernzerhof (PBE) functional with the Tkatchenko and Scheffler (TS) dispersion correction) were first presented in order to analyze the band structures of the studied crystal. An attentive reading of the predicted band structures has shown three lowest gap energies calculated at 4.23, 4.24, and 4.29 eV arising from the Γ→Γ, Γ→Z, and Γ→S transitions, respectively. Then, non-periodic calculations were carried out, at the B3LYP-D3 level of theory (B3LYP functional with the D3 Grimme dispersion correction) in order to optimize the sulfanilic acid-(H2O)10 complex. Starting from the optimized structure, non-covalent interaction calculations were performed and the H-bonding, van der Waals, and steric effect interactions were identified. Finally, the PBE-TS calculations were strengthened by conducting anharmonic B3LYP-D3 calculations in order to achieve a complete decryption of the experimental IR spectrum of sulfanilic acid. The spectral analysis is not limited only to the interpretation of both the NH/CH stretching and fingerprint regions but also extended to the 1800-2600 cm-1 region, which is characterized by a strong anharmonic effect. In the latter wavenumber region, the large experimental IR band centered at 1937 cm-1 is reproduced theoretically employing the anharmonic B3LYP-D3 calculations. The similarity of this band with those usually considered as a fingerprint of zwitterionic amino acids is observed, and its origin is elucidated theoretically. In the vibrational spectroscopy field, the calculations presented in this study are probably the most appropriate for achieving vast analysis and accurate assignments of vibrational spectra of hydrogen bonding compounds recorded in the solid state.

METHOD

The periodic and non-periodic calculations were conducted within the Density Functional Theory (DFT) using the Generalized Gradient Approximation (GGA) at the PBE-TS level of theory and B3LYP-D3 functional with the 6-311++G(d,p) basis set, respectively. The PBE-TS and B3LYP-D3/6-311++G(d,p) calculations were performed using the CASTEP and Gaussian 09 programs, respectively. In addition, The non-covalent interactions were calculated by the Multiwfn 3.8 software. The obtained results for different calculations were visualized by employing the visualization tools in Materials Studio, GaussView, VMD, and Gnuplot programs.

First mesomorphic and DFT characterizations for 3- (or 4-) n-alkanoyloxy benzoic acids and their optical applications

New liquid crystalline hydrogen bonded 3- (or 4)-n-alkanoyloxy benzoic acids were synthesized and probed theoretically and experimentally. The molecular structures of these compounds were elucidated by proton NMR, carbon-13 NMR and elemental analyses. Differential scanning calorimetry (DSC) was used to investigate the thermal and mesomorphic properties of all the symmetrical dimers that bearing identical alkanoyloxy chains. Moreover, polarized optical microscopy (POM) was used to determine their mesophases. The findings show that all the designed symmetrical dimers exhibit the smectic mesophase with relative thermal stability that depends on the length of their terminal side chain. Additionally, the experimental findings of the mesomorphic behavior are further supported by DFT calculations. The alkanoyloxy benzoic acid para-derivatives (In) were shown to be more stable than their meta-substituted (IIn) analogues due to stronger hydrogen bonding interactions. The computed reactivity parameters showed that the position of ester moiety has a significant impact on the acids reactivity. The absorbance spectra of both the 3- (or 4)-n-alkanoyloxy benzoic acids revealed a blue shift with the increment of the of alkyl chain size; however, the energy band gaps of 3-n-alkanoyloxy benzoic derivatives were found to be slightly higher than those of the 4-n-alkanoyloxy benzoic acids. Moreover, the photoluminescence spectrum of the prepared materials is rather broad, and exhibited a red shift as the alkyl chain length increases. The fluorescence lifetime shown to rise as alkyl chain length grows longer, and 3-n-alkanoyloxy benzoic acids have slightly longer lifetime compared to their 4-n-alkanoyloxy benzoic analogues.

Novel Imidazole Liquid Crystals; Experimental and Computational Approaches

The liquid crystalline materials named (E)-4-(2-(4-oxo-5,5-diphenyl-4,5-dihydro-1H-imidazol-2-yl)hydrazineylidene)methyl)phenyl and 4-(alkoxy)benzoate, In, were synthesized and their mesomorphic behaviors were examined. The chemical structures of the produced compounds were confirmed by Fourier-transform infrared spectroscopy (FT-IR), NMR, and elemental analysis. Differential scanning calorimetry (DSC) and polarized optical microscopy were used to investigate the mesomorphic properties of designed heterocyclic derivatives. All the compounds tested had suitable thermal stability and enantiotropic behavior of smectogenic temperature ranges. Furthermore, the enantiotropic smectic C phases were observed to cover all the homologues. Moreover, computational investigations corroborated the experimental findings of the mesomorphic behavior. The reactivity parameters were computed for the derivatives and linked with the experimental data. Theoretical calculations revealed that the polarizability of the studied series increases with the chain length, whereas the HOMO–LUMO energy gap or other reactivity descriptors were less sensitive to the size of the system. On the other hand, the predicted thermodynamic parameters revealed the size dependence of thermal stability of the compounds.

Experimental and Theoretical Investigations of Three-Ring Ester/Azomethine Materials

New three-ring ester/azomethine homologues series, (E)-4-((4-hydroxybenzylidene)amino)phenyl 4-(alkoxy)benzoate In, were prepared and their properties were investigated experimentally and theoretically. FT-IR, NMR, and elemental analyses were used to confirm the chemical structures of the synthesized compounds. The mesomorphic activities of the planned homologues were evaluated using differential scanning calorimetry (DSC) and polarized optical microscopy. All of the homologous examined were found to have non-mesomorphic properties. Theoretical calculations using the density functional theory (DFT) were used to validate the experimental data and determine the most stable conformation of the synthesized compounds. All calculated conformers' thermal properties, dipole moments, and polarizability were discussed. The results show that the terminal alkoxy chain length affects the thermal parameters of the conformers. The correlations between these parameters' values and the conformer type were demonstrated. The base component was expected to be in two conformers according to the orientation of the N atom of imine-linkage. DFT calculations revealed the more probable of the two possible conformers, and the incorporation of the alkoxy terminal chain in one position affect its geometrical and mesomerphic characteristics.

Synthesis, Phase Behavior and Computational Simulations of a Pyridyl-Based Liquid Crystal System

A homologous set of liquid crystalline materials (Tn) bearing Schiff base/ester linkages were prepared and investigated via experimental and theoretical techniques. Terminal flexible groups of different chain lengths were connected to the end of phenylbenzoate unit while the other end of molecules was attached to the heterocyclic pyridine moiety. The molecular structures of the designed molecules were evaluated by FT-IR, NMR spectroscopic analyses, whereas their mesomorphic properties were investigated by polarized optical microscopy (POM) and differential scanning calorimetry (DSC). They all exhibited dimorphic properties with the exception of the members having the shortest and longest terminal flexible chains (n = 6 and 16), which were monomorphic. The T16 derivative was further found possessing purely smectic A (SmA) mesophase while others have their lengths covered by nematic (N) phase. Moreover, the computational evaluation of the azomethine derivatives was carried out using a DFT approach. The polarity of the investigated derivatives was predicted to be appreciably sensitive to the size of the system. Furthermore, the Frontier molecular orbitals analysis revealed various distributions of electron clouds at HOMO and LUMO levels.

Novel sulphonic acid liquid crystal derivatives: experimental, computational and optoelectrical characterizations

A novel liquid crystal homologous series based on the benzene sulphonic acid moiety, namely (E)-4-((4-((4-(alkoxy)benzoyl)oxy)benzylidene)amino)benzenesulfonic acid (Sn), was synthesized and examined via different experimental and theoretical measurements. The four synthesized members have terminally connected alkoxy chain groups, which vary between 6 and 12 carbons. FT-IR and NMR spectroscopy, as well as elemental analyses, were used to confirm their molecular structures. Mesomorphic and optical investigations of the prepared homologues were also conducted using differential scanning calorimetry (DSC) and polarized optical microscopy (POM). The DSC and POM characterization revealed that all of the synthesized sulphonic acid members are monomorphic, exhibiting a pure smectic A (SmA) mesophase with enantiotropic properties. Moreover, all compounds in the group have high thermal transition temperatures. The terminal electron-withdrawing group -SO3H plays a considerable role in the stabilization of the molecule, which in return resulted in high thermal SmA stability. Furthermore, the experimental data relating to the mesophase behavior were substantiated via computational studies using the DFT approach. In addition, the terminal -SO3H moiety has an essential impact on the thermal and physical parameters of possible geometries. All members of the synthesized Sn series exhibit ohmic behavior with electrical resistance in the GΩ range, as revealed by electrical measurements. The S10 electrode had the highest electrical conductivity: 35.16 pS. It also showed two direct optical band gaps of 3.58 and 3.23 eV with Urbach energies of 1261.1 and 502.4 meV. Upon decreasing the number of carbon atoms to n = 6, the main bandgap for S6 reduced to 3.3 eV. The highest conductivity, good absorption, and two large bandgaps recorded for the chain derivative S10 make it suitable for investigations relating to energy-based applications.

Induced Nematic Phase of New Synthesized Laterally Fluorinated Azo/Ester Derivatives

A new series of laterally fluorinated mesomorphic compounds, namely 2-fluoro-4-((4-(alkyloxy)phenyl)diazenyl)phenyl 4-substitutedbenzoate (Inx) were prepared and evaluated for their mesophase behavior. The synthesized series constitutes five members that possess different terminally attached polar groups (X). Their molecular structures were confirmed by elemental analyses and both FT-IR and NMR spectroscopy. Examination of the prepared derivatives was conducted via experimental and theoretical tools. Mesomorphic investigations were carried by polarized optical microscopy (POM) and differential scanning calorimetry (DSC). DSC and POM measurements indicated that except for the un-substituted analogue, all other derivatives were purely nematogenic, possessing their nematic (N) mesophase enantiotropically. This is to say that insertions of terminal polar substituents on their mesogenic structures induced the N phase. In addition, the location of lateral and terminal polar moieties played a considerable role in achieving good thermal N stability. Computational calculations were investigated to determine the deduced optimized molecular structures. Theoretical data indicated that both size and polarity of the terminal substituent (X) have essential impact on the thermal parameters and optical properties of possible geometries.

Effect of the Relative Positions of Di-Laterally Substituted Schiff Base Derivatives: Phase Transition and Computational Investigations

Two new laterally di-substituted derivatives namely, (E)-4-(((2-Chlorophenyl)imino)methyl)-3-methoxyphenyl 4-(alkoxy)benzoate, were designed and investigated for their mesomorphic properties. Elucidation of their molecular structures was carried out by elemental analyses, NMR and FT-IR, spectroscopy. Phase transitions were examined by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). The optimized geometrical architectures of both compounds were deduced theoretically using GAUSSIAN 09 program. In order to establish the most probable conformation for each compound, four probable conformations were predicted for their positional isomers which vary according to the orientations of the two lateral groups. The results were used to correlate the experimental measurements with the predicted conformations. The study revealed that the investigated derivatives are non-mesomorphic and the orientations, as well as positions of the two-lateral groups, have a significant effect on the molecular packing of the molecules, their geometrical and thermal parameters.

Synthetic, Mesomorphic, and DFT Investigations of New Nematogenic Polar Naphthyl Benzoate Ester Derivatives

Four new non-symmetrical derivatives based on central naphthalene moiety, 4-((4–(alkoxy)phenyl) diazenyl)naphthalen–1–yl 4–substitutedbenzoate (I_n/x), were prepared, and their properties were investigated experimentally and theoretically. The synthesized materials bear two wing groups: an alkoxy chain of differing proportionate length (n = 6 and 16 carbons) and one terminal attached to a polar group, X. Their molecular structures were elucidated via elemental analyses and FT-IR and NMR spectroscopy. Differential scanning calorimetry (DSC) and polarized optical microscopy (POM) were carried out to evaluate their mesomorphic properties. The results of the experimental investigations revealed that all the synthesized analogues possess only an enantiotropic nematic (N) mesophase with a high thermal stability and broad range. Density functional theory (DFT) calculations were in accordance with the experimental investigations and revealed that all prepared materials are to be linear and planar. Moreover, the rigidity of the molecule increased when an extra fused ring was inserted into the center of the structural shape, so its thermal and geometrical parameters were affected. Energy gap predictions confirmed that the I_16/c derivative is more reactive than other compounds.