Catalytic process modeling and sensitivity analysis of alkylation of benzene with ethanol over MIL-101(Fe) and MIL-88(Fe)

Synthesis and characterization of Fe3O4@SiO2 -supported metal-organic framework PAEDTC@MIL-101 (Fe) for degradation of chlorpyrifos and diazinon pesticides

In this study, a new core-shell Fe3O4@SiO2/PAEDTC@MIL-101 (Fe) photocatalyst was prepared by sol-gel method and used to degrade diazinon (DZN) and chlorpyrifos (CPS) from aqueous solutions. The characteristics analyzed by various techniques indicate that the core-shell photocatalyst with a specific surface area of 992 m2/g, pore size of 1.35 nm and saturation magnetization of nanocomposite was 12 emu/g has been successfully synthesized and can be separated from the reaction solution by a magnetic field. The maximum efficiencies of DZN (98.8%) and CPS (99.9%) were provided at pH of 5, photocatalyst dosage of 0.6 g/L, pollutant concentration of 25 mg/L, radiation intensity of 15 W, and time of 60 min. The presence of anions such as sulfate, nitrate, bicarbonate, phosphate, and chloride had a negative effect on the performance of the photocatalysis system. Compared to the adsorption and photolysis systems alone, the photocatalytic process based on Fe3O4@SiO2/PAEDTC@MIL-101 (Fe) under two UV and visible light sources showed a high efficiency of 90% in the reaction time of 60 min. The BOD5/COD ratio improved after 50 min to above 0.4 with TOC and COD removal rates >80%. Scavenging tests showed that •OH radical, hole (h+), electron (e-), and O2•- anion were produced in the reaction reactor, and the •OH radical was the dominant species in the degradation of DZN and CPS. The stability tests confirmed the recyclability of the photocatalyst in 360 min of reactions, with a minimum reduction of 7%. Energy consumption for the present system during different reactions was between 15.61 and 25.06 kWh/m3 for DZN degradation and 10-22.87 kWh/m3 for CPS degradation.

Application of a novel composite of Fe3O4@SiO2/PAEDTC surrounded by MIL-101(Fe) for photocatalytic degradation of penicillin G under visible light

The novel photocatalyst of Fe3O4@SiO2/PAEDTC@MIL-101(Fe) was prepared based on the sol-gel method, and its structure and morphology were determined by SEM mapping, TEM, XRD, FTIR, and N2 adsorption-desorption analyses. The photocatalytic activity of nanocomposite was evaluated in comparison with other particles as well as adsorption and photolysis processes. The effect of operating parameters showed that the complete degradation of penicillin G (PNG) can be provided at a photocatalyst dosage of 0.6 g/L, radiation intensity of 36 W, pH of 5, and time of 60 min. In the optimum condition, 84% TOC removal was attained and the BOD5/COD rate for the treated effluent was above 0.4, which was representative of the high biodegradability of the treated effluent compared to the raw sample. The findings of energy consumption showed that PNG can be easily and effectively treated by the photocatalytic process based on magnetic MIL-101(Fe) with electrical energy per order between 10 and 20.87 kWh/m3. Due to the excellent interaction between the MIL-101(Fe) and Fe3O4@SiO2/PAEDTC, the photocatalyst stability test showed a recyclability of the particles for 5 consecutive reaction cycles with a minimum reduction of 7%. Solution treated with photocatalyst under UV and visible light sources explained that the toxicity of the effluent after treatment is significantly reduced with the growth of Escherichia coli. Scavenging experiments showed that •OH radical and hole (h+) are the main agents in degrading PNG to CO2, H2O, and biodegradable and low-toxicity products. Finally, the findings of the diagnostic analysis and comparative experiments proved that with the interaction of Fe3O4@SiO2, NH2, and MIL-101(Fe), a lower band gap can be prepared for more absorption of photons and pollutant and also more and faster production of active radicals.

Recyclable TPA-Modified MIL-88-Supported Ionic Pt as a Highly Efficient Catalyst for Alkene Hydrosilylation

The hydrosilylation reaction driven by a homogeneous catalyst has been widely used in the industrial synthesis of functionalized silicone compounds. However, the homogeneous catalyst for hydrosilylation has the shortcomings of nonrecyclability, undesirable side reactions, and high cost. In this work, a highly efficient heterogeneous catalyst was prepared by loading Pt ions on MIL-88 modified with trimethoxy[3-(phenylamino)propyl]silane. In comparison with previous research studies, the resulting catalyst can exhibit high catalytic activity and excellent stability during the hydrosilylation reaction, which was attributed to the presence of a pyrrolic nitrogen structure between TPA-MIL-88 and the Pt ion. Besides them, 1.2%Pt/TPA-MIL-88 showed the highest catalytic activity and can be reused five times without significant deactivation. Importantly, 1.2%Pt/TPA-MIL-88 also achieved satisfactory results when it was used to catalyze the hydrosilylation reaction for other olefins, implying great potential for application in the silicone industry.

Reusable composite membranes for highly efficient chromium removal from real water matrixes

Natural or industrial hexavalent chromium water pollution continues to be a worldwide unresolved threat. Today, there is intense research on new active and cost-effective sorbents for Cr(VI), but most still exhibit a critical limitation: their powdered nature makes their recovery from water cost and energy consuming. In this work, Al(OH)₃, MIL-88-B(Fe), and UiO-66-NH₂ Cr(VI) sorbents were immobilized into a poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) polymeric substrate to develop an easily reactivable and reusable water filtering technology. The immobilization of the sorbents into the PVDF-HFP porous matrix modified the macro and meso-porous structure of the polymeric matrix, tuning in parallel its wettability. Although a partial blocking of the Cr(VI) adsorptive capacity was observed for of Al(OH)₃ and MIL-88-B(Fe) when immobilized into composite membranes, PVDF-HFP/UiO-66-NH₂ filter (i) exceeded the full capacity of the non-immobilized sorbent to trap Cr(VI), (ii) could be reactivated and reusable, and (iii) it was fully functional when applied in real water effluents.

Reaction pathways and deactivation mechanisms of isostructural Cr and Fe MIL-101 during liquid-phase styrene oxidation by hydrogen peroxide

Isostructural MIL-101(Cr, Fe) is investigated as a modular platform to quantify differences in reactivity, selectivity, and deactivation as functions of intrinsic material properties for styrene oxidation by hydrogen peroxide at mild conditions.