A review of salting-out effect and sugaring-out effect: driving forces for novel liquid-liquid extraction of biofuels and biochemicals

Measuring the Surface Tension of Atmospheric Particles and Relevant Mixtures to Better Understand Key Atmospheric Processes

Aerosol and aqueous particles are ubiquitous in Earth's atmosphere and play key roles in geochemical processes such as natural chemical cycles, cloud and fog formation, air pollution, visibility, climate forcing, etc. The surface tension of atmospheric particles can affect their size distribution, condensational growth, evaporation, and exchange of chemicals with the atmosphere, which, in turn, are important in the above-mentioned geochemical processes. However, because measuring this quantity is challenging, its role in atmospheric processes was dismissed for decades. Over the last 15 years, this field of research has seen some tremendous developments and is rapidly evolving. This review presents the state-of-the-art of this subject focusing on the experimental approaches. It also presents a unique inventory of experimental adsorption isotherms for over 130 mixtures of organic compounds in water of relevance for model development and validation. Potential future areas of research seeking to better determine the surface tension of atmospheric particles, better constrain laboratory investigations, or better understand the role of surface tension in various atmospheric processes, are discussed. We hope that this review appeals not only to atmospheric scientists but also to researchers from other fields, who could help identify new approaches and solutions to the current challenges.

Albumen exosomes alleviate LPS-induced inflammation of intestinal epithelial cells via miR-22/ATM/p53/NF-κB axis

Biological macromolecules identified in albumen were found benefit to intestinal health, whether albumen contains exosomes and function of their cargos in intestinal inflammation remain unknown. This study aimed to investigate characteristics and cargos of albumen exosomes, as well as their potential roles in alleviating inflammation in intestinal epithelial cells. Our results demonstrated that albumen contains exosomes that are cup-shaped morphology vesicles with diameter ranging from 50 to 200 nm. There were 278 miRNAs and 45 proteins with higher expression levels in albumen exosomes, and they were mainly involved in immune responses and programmed cell death pathways, including apoptosis and p53 signaling pathway. LPS induced overexpression of pro-inflammatory cytokines IL-1β and TNF-α and excessive apoptosis, which could be reversed by albumen exosomes. The beneficial effects of exosomes could be mainly attributed to miRNA cargos and their inhibition on inflammatory response signaling pathways (p53 and NF-κB pathways). Mechanically, exosome miR-22 targeted ATM and inhibited p53/NF-κB pathway, alleviating LPS-induced overexpression of Caspase-3 and Bax, and inflammatory response. Collectively, albumen exosomes alleviate inflammation of intestinal epithelial cells via miR-22/ATM/p53/NF-κB axis and these findings may provide theoretical basis to the potential application of albumen exosomes for intestinal inflammation.

Microextraction with smartphone detection of thiocyanate in saliva of tobacco smokers using paper-based analytical method

This study presents a novel, cost-effective approach involving spectrophotometric and smartphone paper-based (SPB) methods and a distinctive salting-out air-assisted dispersive microextraction procedure to quantify thiocyanate in saliva samples. The method relies on the inhibitory effect of thiocyanate on quinoneimine dye formation during the Emerson reaction with sodium hypochlorite. Spectrophotometry quantifies the extracted dye by monitoring quinoneimine color intensity reduction at 525 nm. In the SPB method, extracted dye is applied to a paper strip, a smartphone captures the colored paper, and an application analyzes red, green, and blue components. All analyte determination and extraction variables were explored. Both methods exhibit good linearity (10-100 μg/L) with a coefficient of determination of 0.9991 and a limit of detection of 7.5 μg/L for the spectrophotometric method, and a coefficient of determination of 0.9988 and a limit of detection of 8.8 μg/L for the SPB method. The calculated values for the enrichment factor and extraction recovery of the developed extraction methodology were 46% and 93%, respectively. The methods detect thiocyanate in saliva samples, producing results comparable to a validated method.

Improving greenness and sustainability of standard analytical methods by microextraction techniques: A critical review

Since environmental awareness has increased in analytical chemistry, the demand for green sample preparation methods continues to grow. Microextractions such as solid-phase microextraction (SPME) and liquid-phase microextraction (LPME) miniaturize the pre-concentration step and are a more sustainable alternative to conventional large-scale extractions. However, the integration of microextractions in standard and routine analysis methods is rare, although these applications are used most frequently and have a role model function. Therefore, it is important to highlight that microextractions are capable to replace large-scale extractions in standard and routine methods. This review discusses the greenness, benefits, and drawbacks of the most common LPME and SPME variants compatible with gas chromatography based on the following key evaluation principles: Automation, solvent consumption, hazards, reusability, energy consumption, time efficiency, and handling. Furthermore, the need to integrate microextractions into standard and routine analytical methods is presented by using method greenness evaluation metrics AGREE, AGREEprep, and GAPI applied to USEPA methods and their replacements.

Screening of New Industrially Important Bacterial Strains for 1,3-Propanediol, 2,3-Butanediol and Ethanol Production through Biodiesel-Derived Glycerol Fermentations

A study on the ability of new microbial strains to assimilate biodiesel-derived glycerol at low purity (75% w/w) and produce extra-cellular platform chemical compounds of major interest was carried out. After screening several bacterial strains under different fermentation conditions (e.g., pH, O₂ availability, glycerol purity), three of the screened strains stood out for their high potential to produce valued-added products such as 2,3-butanediol (BDO), 1,3-propanediol (PDO) and ethanol (EtOH). The results indicate that under aerobic conditions, Klebsiella oxytoca ACA-DC 1581 produced BDO in high yield (Y_BDO/Gly = 0.46 g/g, corresponding to 94% of the maximum theoretical yield; Y_mt) and titer, while under anaerobic conditions, Citrobacter freundii NRRL-B 2645 and Enterobacter ludwigii FMCC-204 produced PDO (Y_PDO/Gly = 0.56 g/g, 93% of Y_mt) and EtOH (Y_EtOH/Gly = 0.44 g/g, 88% of Y_mt), respectively. In the case of C. freundii, the regulation of pH proved to be mandatory, due to lactic acid production and a subsequent drop of pH that resulted in fermentation ceasing. In the fed-batch culture of K. oxytoca, the BDO maximum titer reached almost 70 g/L, the Y_BDO/Gly and the mean productivity value (Pr_BDO) were 0.47 g/g and 0.4 g/L/h, respectively, while no optimization was imposed. The final BDO production obtained by this wild strain (K. oxytoca) is among the highest in the international literature, although the bioprocess requires optimization in terms of productivity and total cost. In addition, for the first time in the literature, a strain from the species Hafnia alvei (viz., Hafnia alvei ACA-DC 1196) was reported as a potential BDO producer. The strains as well as the methodology proposed in this study can contribute to the development of a biorefinery that complements the manufacture of biofuels with high-value biobased chemicals.

Lipid Recovery from Microalgae Biomass Using Sugaring-Out Extraction in Liquid Biphasic Flotation System

The increase in global temperature calls for ambitious action to reduce the release of greenhouse gases into the atmosphere. The transportation sector contributes up to 25% of the total emissions released, mainly from the burning of vehicle fuel. Therefore, scientists from all around the world are focusing on finding a sustainable alternative to conventional vehicle fuel. Biofuel has attracted much attention, as it shows great potential for the replacement of traditional fossil fuels. However, the main bottlenecks of biofuel are the ongoing controversial conflict between food security with biofuel production. Therefore, this study focuses on a sustainable extraction of lipids from microalgae for the production of biofuel using a liquid biphasic flotation system coupled with sugaring-out method. This is the first study to combine the methods of liquid biphasic flotation system with the sugaring-out technique. It represents a holistic study of optimum and effective conditions needed to extract lipids from the system and to understand the reliability of sugar solution as the agent of cell disruption. At the 15-min flotation time, 150 g/L of fructose solution with a 1:2 mass separating agent-acetonitrile ratio successfully extracted up to 74% of lipid from Chlorella sorokiniana CY-1. Two types of fatty acid methyl esters were recovered from the study, with C5:0 being the main component extracted.

Ultrasound enhanced solubilization of forest biorefinery hydrolysis lignin in mild alkaline conditions

In the forest biorefinery, hydrolysis lignin (HL) is often dissolved with high concentration NaOH solution, followed by acid precipitation to obtain purified HL. For the first time, this study evaluates the effect of ultrasound (US) on the dissolution of industrially produced HL in aqueous NaOH solutions and the acid precipitation yield of HL. The solubility of HL in mild aqueous NaOH solutions was studied with and without US treatment at 20 kHz concerning the solid-to-liquid ratio, molecular weight of dissolved fractions and structural changes in dissolved HL. Results showed that the solubility of HL at 25 °C was strongly dependent on NaOH concentration. However, the US treatment significantly improved the solubility of HL, reaching a solubility plateau at 0.1 NaOH/HL ratio. US treatment enhanced the solubilization of HL molecules with higher MW compared to conventional mixing. The increase of HL solubility was up to 30 % and the recovery yield of purified lignin with acid precipitation was 37 % higher in dilute NaOH solution. A significant result was that the M_w of dissolved HL in homogeneous alkali solutions decreased with US treatment. SEC, HSQC and ³¹P NMR analyses of dissolved HL characteristics showed that both, the mechanoacoustic and sonochemical solubilization pathways contribute to the dissolution process. However, US does not cause major changes in the HL structure compared to the native lignin. Indeed, US technology has the potential to advance the dissolution and purification of HL in biorefineries by reducing the amount of chemicals required; thus, more controlled and environmentally friendly conditions can be used in HL valorization.

Fire Retardancy and Leaching Resistance of Furfurylated Pine Wood (Pinus sylvestris L.) Treated with Guanyl-Urea Phosphate

Guanyl-urea phosphate (GUP) was introduced into furfurylated wood in order to improve fire retardancy. Modified wood was produced via vacuum-pressure impregnation of the GUP–furfuryl alcohol (FA) aqueous solution, which was then polymerized at elevated temperature. The water leaching resistance of the treated wood was tested according to European standard EN 84, while the leached water was analyzed using ultra-performance liquid chromatography (UPLC) and inductively coupled plasma–sector field mass spectrometry (ICP-SFMS). This new type of furfurylated wood was further characterized in the laboratory by evaluating its morphology and elemental composition using optical microscopy and electron microscopy coupled with energy-dispersive X-ray spectrometry (SEM-EDX). The chemical functionality was detected using infrared spectroscopy (FTIR), and the fire resistance was tested using cone calorimetry. The dimensional stability was evaluated in wet–dry soaking cycle tests, along with the mechanical properties, such as the Brinell hardness and bending strength. The fire retardancy of the modified furfurylated wood indicated that the flammability of wood can be depressed to some extent by introducing GUP. This was reflected in an observed reduction in heat release rate (HRR2) from 454.8 to 264.9 kW/m2, without a reduction in the material properties. In addition, this leaching-resistant furfurylated wood exhibited higher fire retardancy compared to conventional furfurylated wood. A potential method for producing fire-retardant treated furfurylated wood stable to water exposure has been suggested.

Advances in downstream processes and applications of biological carboxylic acids derived from organic wastes

Recovering carboxylic acids derived from organic wastes from fermentation broth is challenging. To provide a reference for future study and industrial application, this review summarized recent advances in recovery technologies of carboxylic acids including precipitation, extraction, adsorption, membrane-based processes, etc. Meanwhile, applications of recovered carboxylic acids are summarized as well to help choose suitable downstream processes according to purity requirement. Integrated processes are required to remove the impurities from the complicated fermentation broth, at the cost of loss and expense. Compared with chemical processes, biological synthesis is better options due to low requirements for the substrates. Generally, the use of toxic agents, consumption of acid/alkaline and membrane fouling hamper the sustainability and scale-up of the downstream processes. Future research on novel solvents and materials will facilitate the sustainable recovery and reduce the cost of the downstream processes.

Separation of the Mixture 2-Propanol + Water by Heterogeneous Azeotropic Distillation with Isooctane as an Entrainer

Advanced processes, which are alternatives to ordinary distillation, are essential to dehydrate azeotropic alcoholic mixtures for biofuel production. In that regard, this work focuses on the analysis of heterogeneous azeotropic distillation for the separation of a 2-propanol + water mixture in order to recover the alcohol with a sufficiently low water content. By comparing the performances of various entrainers on the basis of ternary maps, isooctane was selected for further process analysis. An advantage it poses is related to the fact that traces of it within the recovered dehydrated alcohol are highly welcome with a view to its subsequent use as a fuel. Aspen Plus® V11 software was employed for the simulation of the process, thus filling the gap existing in the literature due to the lack of studies on the process analysis of the heterogeneous azeotropic distillation of the 2-propanol + water system using isooctane as an entrainer.

Solid-phase extraction methods for nucleic acid separation. A review

The separation and purification of biomacromolecules such as nucleic acid is a perpetual topic in separation processes and bioengineering (fine chemicals, biopharmaceutical engineering, diagnostics, and biological characterization). In principle, the solid-phase extraction for nucleic acid exhibits efficient phase separation, low pollution risk, and small sample demand, compared to the conventional liquid-phase extraction. Herein, solid-phase extraction methods are systematically reviewed to outline research progress and explore additional solid-phase sorbents and devices for novel, flexible, and high-efficiency nucleic acid separation processes. The functional materials capture nucleic acid, magnetic and magnetic-free solid-phase extraction methods, separation device design and optimization, and high-throughput automatable applications based on high-performance solid-phase extraction are summarized. Finally, the current challenges and promising topics are discussed.