Effect of Extraction Solvent on Oil and Bioactives Composition of Commercial Indian Niger (Guizotia abyssinica (L.f.) Cass.) Seed

Optimizing niger seed (Guizotia abyssinica) oil quality: A comprehensive analysis of infrared-heat induced changes in bioactive profile, physiochemical attributes, and oxidative stability

Infrared heating (IRH) at 140, 160, and 180°C for varying durations (5, 10, and 15 min) was employed for improving the niger (Guizotia abyssinica) seed oil (NSO) quality for diverse food applications. The study explored changes in phenolic profile, oxidative stability index (OSI), tocopherols, phytosterols, fatty acid profiles, and physicochemical attributes of NSO. Upon IRH at 180°C for 10 min, the oil yield, total phenolic, and flavonoid contents increased from 33.09% to 40.56%, 6.67 to 173.62 mg GAE/kg, and 24.76 to 120.64 mg QE/kg, respectively. The viscosity, chlorophylls, carotenoids, radical scavenging activity, OSI, caffeic, protocatechuic, vanillic, and syringic acids were highest upon IRH at 180°C for 15 min. The tocopherols and phytosterols initially augmented while decremented upon raising IRH conditions. The infrared spectra indicated no adverse impact of IRH on NSO quality. The appropriate IRH conditions can be considered for improving NSO quality and making it valuable for various edible products.

Comparative study on quality characteristics of Bischofia polycarpa seed oil by different solvents: Lipid composition, phytochemicals, and antioxidant activity

Bischofia polycarpa seed oil is rich in nutrition and positively affects on human health. We analyzed and compared the chemical compositions, antioxidant activities, and quality characteristics of Bischofia polycarpa seed oils using different solvents and cold-pressing. Hx: Iso (n-hexane/isopropanol, 3:2 v/v) had the highest lipid yield (35.13 %), while Folch (chloroform/methanol, 2:1 v/v) had the highest linolenic acid (50.79 %), LnLnLn (43.42 %), and LnLnL (23.43 %). Tocopherols (2108.99 mg/kg) were extracted most efficiently with Folch, whereas phytosterols (3852.97 mg/kg) and squalene (55.21 mg/kg) were extracted most efficiently with petroleum ether. Although the lower phytosterol was obtained using isopropanol, the polyphenol content (271.34 mg GAE/kg) was significantly higher than other solvents, showing the best antioxidant ability. Additionally, polyphenols were observed to be the most significant factor predicting antioxidant activity from the correlation analysis. The above information can provide a useful reference for manufacturers to obtain satisfactory Bischofia polycarpa seed oil.

Effect of Different Solvents on the Extraction of Oil from Peony Seeds (Paeonia suffruticosa Andr.): Oil Yield, Fatty Acids Composition, Minor Components, and Antioxidant Capacity

Peony seed oil is full of nutrition and exert positive effects on human's health. The influences of seven solvents (isopropanol, acetone, Hx:Iso (n-hexane/isopropanol, 3:2 v/v), Chf:Me (chloroform/methanol, 1:1 v/v), ethyl acetate, n-hexane, and petroleum ether) on the oil yields, lipid composition, minor components and antioxidant capacity of peony seed oil were compared in this study. Results indicated that the highest oil yield (35.63%) was obtained using Hx:Iso, while Chf:Me showed the best extraction efficiency for linolenic acid (43.68%), trilinolenoyl-glycerol (15.00%), and dilinolenoyl-linoleoyl-glycerol (18.01%). For minor components, Chf:Me presented a significant advantage in the extraction of tocopherol (601.49 mg/kg), and the peony seed oil extracted with petroleum ether had the highest sterols (4089.82 mg/kg) and squalene contents (66.26 mg/kg). Although the use of isopropanol led to a lower sterol content, its extracts showed a significant higher polyphenol content (68.88 mg GAE/kg) than other solvents and exhibited the strongest antioxidant capacity. Additionally, correlation analysis revealed that polyphenols were the most important minor component for predicting the antioxidant capacity of peony seed oil. The above information is valuable for manufacturers to select suitable solvents to produce peony seed oil with the required levels of fatty acids and minor components for targeted end-use.

Fatty Acid Profile, Total Phenolic Content, and Antioxidant Activity of Niger Seed (Guizotia abyssinica) and Linseed (Linum usitatissimum)

Fatty acid composition and antioxidant content are major determinants of vegetable oil quality. Antioxidants are important food components, and there is an increasing interest of replacing synthetic antioxidants with those from natural sources for food industry. The objective of this study was to evaluate fatty acid composition, total phenolic, carotenoid and chlorophyll contents, and antioxidant capacity of different varieties of two oilseed crops. Five niger seed and eight linseed varieties were used. For the analysis of fatty acid composition of the seed oil, gas chromatography method was used. Standard methods were used for total phenolic, carotenoid and chlorophyll contents, and antioxidant properties. In niger seed oil, linoleic acid (C18:2) was the dominant fatty acid, accounting for 73.3% (variety Esete) to 76.8% (variety Ginchi) of the total fatty acids. In linseed oil, linolenic acid (C18:3) was the dominant fatty acid accounting for 55.7 (variety Chilalo) to 60.1 (variety Belaye-96). The total phenolic content ranged from 22.4 mg GAE/g (variety Esete) to 27.9 mg GAE/g (variety Ginchi) in niger seed and from 20.5 mg GAE/g (variety Belay-96) to 25.4 mg GAE/g (variety Ci-1525) in linseed. In niger seed, variety Fogera had the highest values for FRAP and radical scavenging activity. The carotenoid content also showed significant variation among the varieties ranging from 2.57 (Esete) to 8.08 (Kuyu) μmol/g for niger and 4.13 (Tole) to 8.66 (Belay-96) μmol/g for linseed. The FRAP assay showed that variety Fogera of niger seed and variety Chilalo of linseed came on top among their respective varieties with values of 57.2 and 30.6, respectively. Both niger seed and linseed were shown to be rich in bioactive compounds. However, significant variation was observed among the varieties of each crop and among the two crops in their total phenolic and carotenoid contents as well as ferric reducing potential and radical scavenging capacity. Principal component analysis revealed the presence of more than one group in both niger seed and linseed. Hence, genetic variation among the varieties should be utilized for improving their desirable characteristics through breeding. Both oil crops can be used as the source of antioxidants for replacing synthetic compounds.

Lipidome, nutraceuticals and nutritional profiling of Pyrus pashia Buch.-ham ex D. Don (Kainth) seeds oil and its antioxidant potential

Kainth fruit, as traditional medicine, has been used in the Himalayan region for its health-promoting properties. However, the phytochemicals and lipidomes of Kainth Seed Oil (KSO) are still scarce. Here, we investigated the physicochemical characterization of KSO and its nutraceuticals, antioxidant potentials. Kainth seeds contain 19-20% oil rich in polyunsaturated fatty acids (PUFA, 82.22%), particularly linoleic acid (C18:2). Lipidome analysis of KSO using high-resolution mass spectrometry showed that trilinoleate (C54:6) was the dominant triacylglycerol (TAG) species. Further, the characteristics of PUFA-rich oil were validated by Fourier transforms infrared spectroscopy (FTIR) and Differential Scanning calorimetry (DSC). The nutraceuticals profiling of KSO depicted the presence of tocopherols (86.72 mg) and phytosterols (32.25 mg) in 100 g oil with significant antioxidant activity. The oil cake contained 19.09% protein and minerals and can be a source for dietary protein. Collectively these results suggest that KSO will be a suitable source for PUFA and nutraceuticals potential.

Synergistic effects of ultrasound and extraction solvent on the bioactive compound in kenaf seed oil

Kenaf seed oil was extracted with 3 different solvents, i.e. hexane, ethanol and aqueous enzymatic medium with or without ultrasonic assistance. The synergistic effects of ultrasound and extraction solvent on the content of bioactive compound in kenaf seed oil was investigated. Results show that ultrasound-assisted extraction with hexane obtained the highest yield (84.71%), while yield with aqueous enzymatic medium was the lowest (51.12%). Two endothermic peaks exhibited on the melting curve of kenaf seed oil at the temperature range - 37 to - 25 °C and - 12 to - 2 °C, respectively. Linoleic, oleic and palmitic acid are the major fatty acids, accounting for above 96% of the total fatty acids. The content of vitamin E, phosphatide, total phenols and sterol are 92.38-105.01 mg/100 g oil, 0.38-22.28 g/kg, 0.51-71.02 mg GAE/100 g and 161.79-533.12 mg/100 g, respectively. The solvent employed has significant effect (p < 0.05) on the thermal property, fatty acid composition and bioactive constituents of the extracted kenaf seed oil. The oil extracted with ethanol contained more nervonic acid and bioactive components such as β-carotene, phosphatide, total phenols and sterols. The introduction of ultrasound reduced the extraction time remarkably. The results demonstrate that extraction with ethanol combined with ultrasound is an effective method to extract kenaf seed oil, as more reasonable fatty acid composition and higher content of bioactive components can be achieved.

The Effect of Different Solvent Types and Extraction Methods on Oil Yields and Fatty Acid Composition of Safflower Seed

The aim of this study was to determine the effect of different extraction solvents (petroleum benzene, hexane, diethyl ether and acetone) and extraction methods (hot and cold) on oil yield of safflower seeds and its fatty acid compositions. Oil contents of safflower seeds extracted by hot extraction system were changed between 37.40% (acetone) and 39.53% (petroleum benzene), while that of cold extraction was varied between 39.96% (petroleum benzene) and 39.40% (diethyl ether). Regarding the extraction solvents, the highest oil yield (39.53%) was obtained with petroleum benzene, while the minimum value (37.40%) was found with acetone under hot extraction condition. The main fatty acids observed in all extracted oil samples were linoleic, oleic and palmitic acids. Oleic acid contents of safflower oils extracted by hot extraction system was ranged between 41.20% (acetone) and 42.54% (hexane), its content in oils obtained by cold extraction method was varied between 40.58% (acetone) and 42.10% (hexane and diethyl ether). Linoleic content of safflower oil extracted by hot extraction system was found between 48.23% (acetone) and 49.62% (hexane), while that oil extracted by cold method range from 48.07 (hexane) to 49.09% (acetone). The fatty acid composition of safflower seeds oil showed significant (p < 0.05) differences depending on solvent type and extraction method. The results of this study provide relevant information that can be used to improve organic solvent extraction processes of vegetable oil.

Subcritical Fluid Extraction of Chinese Quince Seed: Optimization and Product Characterization

Chinese quince seed (CQS) is an underutilized oil source and a potential source of unsaturated fatty acids and α-tocopherol-rich oil. Subcritical fluid (SCF) extraction is executed at lower pressures and temperatures than the pressures and temperatures used in supercritical fluid extraction. However, no studies on the SCF extraction of CQS oil are reported. Therefore, the objective of this study was to evaluate the use of SCF for the extraction of CQS oil and to compare the use of SCF with the classical Soxhlet (CS) and supercritical CO₂ (SC-CO₂) extraction methods. Response surface methodology (RSM) was used to investigate the extraction conditions: temperature (45–65 °C), time (30–50 min), and solvent/solid ratio (5–15 mL/g). The optimization results showed that the highest yield (27.78%) was obtained at 56.18 °C, 40.20 min, and 12.57 mL/g. The oil extracted by SCF had a higher unsaturated fatty acid content (86.37%–86.75%), higher α-tocopherol content (576.0–847.6 mg/kg), lower acid value (3.97 mg/g), and lower peroxide value (0.02 meq O₂/kg) than extractions using CS and SC-CO₂ methods. The SCF-defatted meal of oilseed exhibited the highest nitrogen solubility index (49.64%) and protein dispersibility index (50.80%), demonstrating that SCF extraction was a promising and efficient technique as an alternative to CS and SC-CO₂ methods, as very mild operating conditions and an eco-friendly solvent can be used in the process with maximum preservation of the quality of the meal.