Design of New Camelina Oil-Based Hydrophilic Monomers for Novel Polymeric Materials

Thermo-Responsive Shape-Memory Dual-Cured Polymers Based on Vegetable Oils

The development of thermo-responsive shape-memory polymers has attracted attention due to their ability to undergo reversible deformations based on temperature changes. Vegetable oils are confirmed to be an excellent biorenewable source of starting materials for the synthesis of polymers. Therefore, the objective of this research was to synthesize thermo-responsive shape-memory polymers based on vegetable oils by using the dual-curing technique and obtaining polymers with tailorable properties. Acrylated epoxidized soybean oil and two epoxidized vegetable oils, linseed oil and camelina oil, were chosen for dual curing with m-xylylenediamine. Rheological tests were used to analyze the curing kinetics of systems undergoing radical photopolymerization, thermal cationic polymerization, and dual-curing processes. The rheological, mechanical, and thermal characteristics of the polymers were enhanced by the second curing stage. Dual-cured vegetable oil-based polymers had shape-memory properties with a recovery ratio of 100%, making them suitable for a variety of applications, including electronics, biomedical devices, and robotics.

Bioconjugation of Vegetable Oils with UV Absorbers: New Approach in Skin Photoprotection

We reported the tunable synthesis of new vegetable oil-UV filter bioconjugates using sea buckthorn oil (SBO) and p-methoxycinnamic acid (p-MCA) as an alternative to the common UV filter, ethylhexyl-p-methoxycinnamate (octinoxate). The synthetic strategy is based on the sustainable ring-opening reaction of epoxidized SBO with p-MCA in heterogenous catalysis in eco-friendly solvents. The amount of UV-absorptive moieties grafted on the triglyceride backbone is controlled by different epoxidation degrees as determined by NMR spectroscopy. The performance of the new UV-absorber bioconjugates was assessed by in vitro sun protection factor (SPF) measurements after inclusion in SBO-ethylcellulose (EC) oleogels and comparison with the SPF value of the SBO-EC-octinoxate oleogel with equivalent p-MCA acid moieties (10% wt/wt). The concentration obtained for the SBO-EC oleogel formulated with the bioconjugate with the lowest degree of functionalization, namely 55%, represents 45% of the SPF determined for the SBO-EC-octinoxate oleogel, regardless of the concentration of measured solutions. The new concept of vegetable oil-UV-absorber bioconjugates has potential UV-B photoprotective properties when included in oleogel formulations and deserves further investigation of their properties and stability including association with UV-A absorbers, respectively.

Genetic Improvement of Camelina sativa (L.) Crantz: Opportunities and Challenges

In recent years, a renewed interest in novel crops has been developing due to the environmental issues associated with the sustainability of agricultural practices. In particular, a cover crop, Camelina sativa (L.) Crantz, belonging to the Brassicaceae family, is attracting the scientific community's interest for several desirable features. It is related to the model species Arabidopsis thaliana, and its oil extracted from the seeds can be used either for food and feed, or for industrial uses such as biofuel production. From an agronomic point of view, it can grow in marginal lands with little or no inputs, and is practically resistant to the most important pathogens of Brassicaceae. Although cultivated in the past, particularly in northern Europe and Italy, in the last century, it was abandoned. For this reason, little breeding work has been conducted to improve this plant, also because of the low genetic variability present in this hexaploid species. In this review, we summarize the main works on this crop, focused on genetic improvement with three main objectives: yield, seed oil content and quality, and reduction in glucosinolates content in the seed, which are the main anti-nutritional substances present in camelina. We also report the latest advances in utilising classical plant breeding, transgenic approaches, and CRISPR-Cas9 genome-editing.

Investigating the Synthesis and Characteristics of UV-Cured Bio-Based Epoxy Vegetable Oil-Lignin Composites Mediated by Structure-Directing Agents

Bio-based composites were developed from the epoxy derivatives of Lallemantia iberica oil and kraft lignin (ELALO and EpLnK), using UV radiation as a low energy consumption tool for the oxiranes reaction. To avoid the filler sedimentation or its inhomogeneous distribution in the oil matrix, different structure-directing agents (SDA) were employed: 1,3:2,4-dibenzylidene-D-sorbitol (DBS), 12-hydroxystearic acid (HSA) and sorbitan monostearate (Span 60). The SDA and EpLnK effect upon the ELALO-based formulations, their curing reaction and the performance of the resulting materials were investigated. Fourier-transform Infrared Spectrometry (FTIR) indicates different modes of molecular arrangement through H bonds for the initial ELALO-SDA or ELALO-SDA-EpLnK systems, also confirming the epoxy group's reaction through the cationic mechanism for the final composites. Gel fraction measurements validate the significant conversion of the epoxides for those materials containing SDAs or 1% EpLnK; an increased EpLnK amount (5%), with or without SDA addition, conduced to an inefficient polymerization process, with the UV radiation being partially absorbed by the filler. Thermo-gravimetric and dynamic-mechanical analyses (TGA and DMA) revealed good properties for the ELALO-based materials. By loading 1% EpLnK, the thermal stability was improved to with 10 °C (for Td3%) and the addition of each SDA differently influenced the Tg values but also gave differences in the glassy and rubbery states when the storage moduli were interrogated, depending on their chemical structures. Water affinity and morphological studies were also carried out.

Valorization of camelina oil to biobased materials and biofuels for new industrial uses: a review

Global environmental pollution is a growing concern, especially the release of carbon dioxide from the use of petroleum derived materials which negatively impacts our environment's natural greenhouse gas level. Extensive efforts have been made to explore the conversion of renewable raw materials (vegetable oils) into bio-based products with similar or enhanced properties to those derived from petroleum. However, these edible plant oils, commonly used for human food consumption, are often not suitable raw materials for industrial applications. Hence, there is an increasing interest in exploring the use of non-edible plant oils for industrial applications. One such emerging oil seed crop is Camelina sativa, generally known as camelina, which has limited use as a food oil and so is currently being explored as a feedstock for various industrial applications in both Europe and North America. Camelina oil is highly unsaturated, making it an ideal potential AGH feedstock for the manufacture of lower carbon footprint, biobased products that reduce our dependency on petroleum resources and thus help to combat climate change. This review presents a brief description of camelina highlighting its composition and its production in comparison with traditional plant oils. The main focus is to summarize recent data on valorization of camelina oil by various chemical means, with specific emphasis on their industrial applications in biofuels, adhesives and coatings, biopolymers and bio-composites, alkyd resins, cosmetics, and agriculture. The review concludes with a discussion on current challenges and future opportunities of camelina oil valorization into various industrial products.

Composite Materials from Renewable Resources as Sustainable Corrosion Protection Coatings

Epoxidized linseed oil (ELO) and kraft lignin (LnK) were used to obtain new sustainable composites as corrosion protection layers through a double-curing procedure involving UV radiation and thermal curing to ensure homogeneous distribution of the filler. The crosslinked structures were confirmed by Fourier-transform infrared spectrometry (FTIR), by comparative monitorization of the absorption band at 825 cm^-1, attributed to the stretching vibration of epoxy rings. Thermal degradation behavior under N2 gas indicates that the higher LnK content, the better thermal stability of the composites (over 30 °C of Td10% for ELO + 15% LnK), while for the experiment under air-oxidant atmosphere, the lower LnK content (5%) conducted to the more thermo-stable material. Dynamic-mechanic behavior and water affinity of the new materials were also investigated. The increase of the Tg values with the increase of the LnK content (20 °C for the composite with 15% LnK) denote the reinforcement effect of the LnK, while the surface and bulk water affinity were not dramatically affected. All the obtained composites were tested as carbon steel corrosion protection coatings, resulting in significant increase of corrosion inhibition efficiency (IE) of 140-380%, highlighting the great potential of the bio-based ELO-LnK composites as a future perspective for industrial application.

Harnessing a byproduct from wastewater treatment to obtain improved starch/poly(vinyl alcohol) composites

A rational method to harness a triglyceride-based by-product containing chicken fat traces, extracted from the simulated slaughterhouses wastewater was adopted. Methacrylated linseed oil was used as photo-reactive monomer to "catch" the grease molecules, resulting in a polymeric network (PFrec), further embedded in starch/poly(vinyl alcohol) (St/PVA)-based composites, with or without plasticizer (glycerol-Gly), with enhanced properties. Hydrophobic additive improved the thermal stability of St/PVA blends, an 18 ⁰C increase of Td3 % being registered for PFrec-loaded sample. Mechanical tests revealed that association of PFrec with Gly improved the flexibility and also reinforced the systems, although, no plasticizing effect was observed at PFrec addition. Solubility determinations for the St/PVA-based composite films showed that hydrophobic PFrec increased the water resistance with at least 40 %. According to contact angle measurements a good dispersion of PFrec in the St/PVA network was mediated at the interface by hydrophilic Gly molecules.