Biosorption of cadmium ions using Pleurotus ostreatus: Growth kinetics, isotherm study and biosorption mechanism

Heavy Metal Remediation by Dry Mycelium Membranes: Approaches to Sustainable Lead Remediation in Water

Lead contamination poses significant and lasting health risks, particularly in children. This study explores the efficacy of dried mycelium membranes, distinct from live fungal biomass, for the remediation of lead (Pb(II)) in water. Dried mycelium offers unique advantages, including environmental resilience, ease of handling, biodegradability, and mechanical reliability. The study explores Pb(II) removal mechanisms through sorption and mineralization by dried mycelium hyphae in aqueous solutions. The sorption isotherm studies reveal a high Pb(II) removal efficiency, exceeding 95% for concentrations below 1000 ppm and ∼63% above 1500 ppm, primarily driven by electrostatic interactions. The measured infrared peak shifts and the pseudo-second-order kinetics for sorption suggests a correlation between sorption capacity and the density of interacting functional groups. The study also explores novel surface functionalization of the mycelium network with phosphate to enhance Pb(II) removal, which enables remediation efficiencies >95% for concentrations above 1500 ppm. Scanning electron microscopy images show a pH-dependent formation of Pb-based crystals uniformly deposited throughout the entire mycelium network. Continuous cross-flow filtration tests employing a dried mycelium membrane demonstrate its efficacy as a microporous membrane for Pb(II) removal, reaching remediation efficiency of 85-90% at the highest Pb(II) concentrations. These findings suggest that dried mycelium membranes can be a viable alternative to synthetic membranes in heavy metal remediation, with potential environmental and water treatment applications.

Low cost and renewable H2S-biofilter inoculated with Trichoderma harzianum

The use of biogas to produce hydrogen is currently gaining more attention. One of the drawbacks for the valorization of biogas is the presence of H2S, a hazardous molecule that can cause damage in the metallic internal structures of industries. In this study, the H2S-removal performance of a fungi-based biofilter was investigated. First, an H2S-resistant fungal species was isolated from an industrial digestate and identified as Trichoderma harzianum. The capacity of this microorganism to metabolize H2S in a mineral medium was confirmed. Then, a bioreactor was constructed and put in place to monitor the elimination of gaseous H2S. A mix of cardboard, perlite, woodchips, and wood pellets was used as filling. Microbial development and the outlet gas composition were monitored during a 60-day experimental process during which H2S was completely removed. 97% of the introduced sulphur was detected in the used filling material (fungal species + packing material) by elemental analysis. 24% of the detected sulphur was identified by ion-exchange chromatography as SO42-. Elemental analysis, gas chromatography, and ion-exchange chromatography were used to determine the bioreactor sulphur balance. Metagenomic analysis underlined that H2S elimination was due to the presence of Trichoderma harzianum with a H2S-specific bacterial consortium.

Exploiting fungi in bioremediation for cleaning-up emerging pollutants in aquatic ecosystems

Aquatic pollution negatively affects water bodies, marine ecosystems, public health, and economy. Restoration of contaminated habitats has attracted global interest since protecting the health of marine ecosystems is crucial. Bioremediation is a cost-effective and eco-friendly way of transforming hazardous, resistant contaminants into environmentally benign products using diverse biological treatments. Because of their robust morphology and broad metabolic capabilities, fungi play an important role in bioremediation. This review summarizes the features employed by aquatic fungi for detoxification and subsequent bioremediation of different toxic and recalcitrant compounds in aquatic ecosystems. It also details how mycoremediation may convert chemically-suspended matters, microbial, nutritional, and oxygen-depleting aquatic contaminants into ecologically less hazardous products using multiple modes of action. Mycoremediation can also be considered in future research studies on aquatic, including marine, ecosystems as a possible tool for sustainable management, providing a foundation for selecting and utilizing fungi either independently or in microbial consortia.

Recent advancements in cadmium-microbe interactive relations and their application for environmental remediation: a mechanistic overview

The toxic and persistent nature of cadmium (Cd) in the environment has become a matter of concern with its drastic increase in the concentrations over past few decades. Among the various techniques, the microbial remediation has been accepted as an effective decontamination tool for environmental applications, which is sustainable over a period of time. The Cd decontamination potential of the microbes depends on various internal and external factors that play a crucial role in selection of the microbes for application in a particular environment. Thus, it is important to understand the role of these factors for optimal application of the microbes. This study provides an insight into the mechanisms involved between the microbes and the environmental Cd. The study also briefly reviews the mathematical models that have been used to predict the remediation potential of the microbes and the kinetics involved during the process. A critical analysis of the recent advancements in the techniques for use of bacteria, fungi, and algal cells to remove Cd has been also presented in the manuscript.

Expanding the valorization of waste mushroom substrates in agricultural production: progress and challenges

Waste mushroom substrate (WMS) generated in large quantities from mushroom production process has caused severe environmental pollution. As a sustainable resource, the valorization of WMS in the agricultural field has attracted attention due to the abundant active components. A comprehensive review of valorization of WMS in agricultural production is meaningful to promote the further utilization of this resource. This paper provided an overview of the valorization in sustainable agricultural production using WMS, including animal and crop farming improvement, and agricultural environmental restoration. Moreover, the limitations and the possible development directions of WMS in agricultural production were discussed. Different sustainable cycle models for WMS in agricultural production were proposed. The aim of this review is to provide a feasible solution for the favorable treatment of WMS and improvement of agricultural production quality.

Growth response and mycoremediation of heavy metals by fungus Pleurotus sp

Heavy metal contamination (HMs) in water and soil is the most serious problem caused by industrial and mining processes and other human activities. Mycoremediation is a biotechnology that employs fungi to remove toxic contaminants from the environment in an efficient and cost-effective manner. Pleurotus spp. have been shown to either increase plant growth on metal-contaminated soils by providing more nutrients or by reducing metal toxicity. Pleurotus species (J. Lange), a mushroom that can be eaten, has been observed growing on plantations of wood trees in Kerman's orchards. P. sp. was the subject of this study, which examined the effects of different concentrations of various heavy metals Cobalt (Co), Copper (Cu), and Nickel (Ni) (0, 15, 30, 45, and 60 mg/L) on fungal colony diameters, mycelial dry weights, accumulation of heavy metals, and antioxidative enzymes. The findings revealed that P. sp. was more tolerant of Co than other metals, so the fungus grew more in the presence of low concentrations of Co and Cu. However, even at concentrations as low as 15 mg/L, Ni greatly inhibited the growth of biomass and colony diameter. Heavy metals increased the activity of superoxide dismutases (SOD) and catalase (CAT) up to 45 mg/L, but an increase in metal concentration above 45 mg/L resulted in a significant decrease in SOD. Metals in mycelium also increased as the concentrations of these heavy metals increased.

Optimization of White-Rot Fungi Mycelial Culture Components for Bioremediation of Pharmaceutical-Derived Pollutants

White-rot fungi can degrade a wide spectrum of environmental pollutants, including pharmaceuticals, which are not efficiently removed from wastewater by conventional methods, e.g., the activated sludge method. However, the treatment of wastewater with the use of fungal cultures (mycoremediation) also has significant limitations: among others, the need to use appropriate, often-expensive culture media. We aimed to screen 18 media ingredients, including seven agrifood byproducts for Armillaria mellea, Phanerochaete chrysosporium and Pleurotus ostreatus in submerged cultures to select the low-cost medium optimal for biomass production and laccase activity. We screened nine mathematic models to describe the relation of fungal growth and the amount of the selected byproduct in media. Finally, we tested the ability of the strain with the highest mycelial growth and enzyme-producing ability in the selected medium to degrade eight drug contaminants. Three media variants composed of byproducts provided both efficient growth and laccase production: corn steep liquor + poplar, dried distillers grains with solubles + poplar and corn steep liquor 50%. Among the investigated growth models, the Han–Levenspiel equation described well the specific growth rate in function of the nominal substrate concentration in one-component media. Pleurotus ostreatus, the fungus with the highest ligninolytic enzyme activity, cultured in medium composed of corn steep liquor, removed six of eight drug contaminants with a removal degree of 20–90% in 48 h. The obtained data on the optimal culture media consisting of insoluble components provide initial data for upscaling the process and designing an appropriate type of bioreactor for the process of removing drug contaminants from water.

Myco-remediation: A mechanistic understanding of contaminants alleviation from natural environment and future prospect

Industrialization and modernization of agricultural systems contaminated lithosphere, hydrosphere, and biosphere of the Earth. Sustainable remediation of contamination is essential for environmental sustainability. Myco-remediation is proposed to be a green, economical, and efficient technology over conventional remediation technologies to combat escalating pollution problems at a global scale. Fungi can perform remediation of pollutants through several mechanisms like biosorption, precipitation, biotransformation, and sequestration. Myco-remediation significantly removes or degrades metal metals, persistent organic pollutants, and other emerging pollutants. The current review highlights the species-specific remediation potential, influencing factors, genetic and molecular control mechanism, applicability merits to enhance the bioremediation efficiency. Structure and composition of fungal cell wall is crucial for immobilization of toxic pollutants and a subtle change on fungal cell wall structure may significantly affect the immobilization efficiency. The utilization protocol and applicability of enzyme engineering and myco-nanotechnology to enhance the bioremediation efficiency of any potential fungus was proposed. It is advocated that the association of hyper-accumulator plants with plant growth-promoting fungi could help in an effective cleanup strategy for the alleviation of persistent soil pollutants. The functions, activity, and regulation of fungal enzymes in myco-remediation practices required further research to enhance the myco-remediation potential. Study of the biotransformation mechanisms and risk assessment of the products formed are required to minimize environmental pollution. Recent advancements in molecular "Omic techniques"and biotechnological tools can further upgrade myco-remediation efficiency in polluted soils and water.

Comparative transcriptome analysis reveals the differential response to cadmium stress of two Pleurotus fungi: Pleurotus cornucopiae and Pleurotus ostreatus

Pleurotus has great potential for heavy metal mycoremediation. Using comparative transcriptome analysis, the response of Pleurotus ostreatus and Pleurotus cornucopiae under Cd contamination was evaluated. P. ostreatus and P. cornucopia accumulated 0.34 and 0.46 mg/g Cd in mycelium, respectively. Cd removal elevated with its concentration elevation, which reached 56.47% and 54.60% for P. ostreatus and P. cornucopia with Cd at 20 mg/L. Low-level Cd (≤ 1 mg/L) had no significant influence on either fungus, while varied response was observed under high-level Cd. 705 differentially expressed genes (DEGs) were identified in P. cornucopia at Cd1 and Cd20, whereas 12,551 DEGs in P. ostreatus. Differentially regulated functional categories and pathways were also identified. ATP-binding cassette transporters were involved in Cd transport in P. cornucopia, whereas the endocytosis and phagosome pathways were more enhanced in P. ostreatus. 26 enzymes including peroxisomal enzymes catalase and superoxide dismutase were upregulated in P. ostreatus, whereas only cytosolic catalase was overexpressed in P. cornucopia, suggesting their different Cd detoxification pathways. Also, the mitogen-activated protein kinase signaling pathway involved in Cd resistance in both species instead of glutathione metabolism, although more active in P. ostreatus. These findings provided new insight into the molecular mechanism of mycoremediation and accumulator screening.

Potential Usage of Edible Mushrooms and Their Residues to Retrieve Valuable Supplies for Industrial Applications

Currently, the food and agricultural sectors are concerned about environmental problems caused by raw material waste, and they are looking for strategies to reduce the growing amount of waste disposal. Now, approaches are being explored that could increment and provide value-added products from agricultural waste to contribute to the circular economy and environmental protection. Edible mushrooms have been globally appreciated for their medicinal properties and nutritional value, but during the mushroom production process nearly one-fifth of the mushroom gets wasted. Therefore, improper disposal of mushrooms and untreated residues can cause fungal disease. The residues of edible mushrooms, being rich in sterols, vitamin D2, amino acids, and polysaccharides, among others, makes it underutilized waste. Most of the published literature has primarily focused on the isolation of bioactive components of these edible mushrooms; however, utilization of waste or edible mushrooms themselves, for the production of value-added products, has remained an overlooked area. Waste of edible mushrooms also represents a disposal problem, but they are a rich source of important compounds, owing to their nutritional and functional properties. Researchers have started exploiting edible mushroom by-products/waste for value-added goods with applications in diverse fields. Bioactive compounds obtained from edible mushrooms are being used in media production and skincare formulations. Furthermore, diverse applications from edible mushrooms are also being explored, including the synthesis of biosorbent, biochar, edible films/coating, probiotics, nanoparticles and cosmetic products. The primary intent of this review is to summarize the information related to edible mushrooms and their valorization in developing value-added products with industrial applications.

Removal of Cadmium (II) from Aqueous Medium Using Vigna radiata Leave Biomass: Equilibrium Isotherms, Kinetics and Thermodynamics

In the present study, a novel biosorbent Vigna radiata leaves biomass (L. biomass) was utilized for cadmium (II) extraction from aqueous medium. Cadmium (II) free and cadmium (II) loaded L. biomass was analyzed by Fourier transform infrared (FTIR) spectroscopy. Adsorption of cadmium (II) from aqueous medium was studied under various conditions such as adsorbent dose, agitation time, pH and temperature of the medium to optimize the process variables. Different models including Langmuir, Freundlich, Temkin and Dubinin–Radushkevich (DR) were used to elaborate the insight of adsorption process. Best interpretation of biosorption process was given by Langmuir model. Value of maximum adsorption capacity (qm) calculated from Langmuir isotherm model was found to be 13.44 mg/g. Results indicated the establishment of physical interaction between cadmium (II) ions and functional groups of L. biomass. Kinetic study for adsorption of cadmium (II) ions on L. biomass was done by applying pseudo first order, pseudo second order, elovich and intra-particles diffusion models. Biosorption process best followed the pseudo second order kinetics. Value of standard Gibbs energy (ΔG°) and standard enthalpy change (ΔH°) showed the feasibility, spontaneity and endothermic nature of adsorption process. Percentage removal efficiency of L. biomass for cadmium (II) was successfully maintained for four cycles. Biomass has a potential to be used as an efficient adsorbent for the removal of cadmium (II) from different polluted water samples.

Mycoremediation potential of Pleurotus species for heavy metals: a review

Mycoremediation is one of the biotechniques that recruits fungi to remove toxic pollutants from environment in an efficient and economical manner. Mushrooms, macro-fungi, are among the nature's most important mycoremediators. Pleurotus species (also called oyster mushrooms) are considered to be the most popular and widely cultivated varieties worldwide and this might be attributed to their low production cost and higher yields. Apart from their nutritive and therapeutic properties, Pleurotus species have high biosorption potential due to their extensive biomass, i.e. mycelial production. The genus has been reported to accumulate high levels of heavy metals. The current state-of-the art review mainly summarises previous investigations carried out by researchers on different roles and mechanisms played by Pleurotus species on heavy metals mycoremediation.

Environmental applications of chitosan and its derivatives

Chitosan originates from the seafood processing industry and is one of the most abundant of bio-waste materials. Chitosan is a by-product of the alkaline deacetylation process of chitin. Chemically, chitosan is a polysaccharide that is soluble in acidic solution and precipitates at higher pHs. It has great potential for certain environmental applications, such as remediation of organic and inorganic contaminants, including toxic metals and dyes in soil, sediment and water, and development of contaminant sensors. Traditionally, seafood waste has been the primary source of chitin. More recently, alternative sources have emerged such as fungal mycelium, mushroom and krill wastes, and these new sources of chitin and chitosan may overcome seasonal supply limitations that have existed. The production of chitosan from the above-mentioned waste streams not only reduces waste volume, but alleviates pressure on landfills to which the waste would otherwise go. Chitosan production involves four major steps, viz., deproteination, demineralization, bleaching and deacetylation. These four processes require excessive usage of strong alkali at different stages, and drives chitosan's production cost up, potentially making the application of high-grade chitosan for commercial remediation untenable. Alternate chitosan processing techniques, such as microbial or enzymatic processes, may become more cost-effective due to lower energy consumption and waste generation. Chitosan has proved to be versatile for so many environmental applications, because it possesses certain key functional groups, including - OH and -NH2 . However, the efficacy of chitosan is diminished at low pH because of its increased solubility and instability. These deficiencies can be overcome by modifying chitosan's structure via crosslinking. Such modification not only enhances the structural stability of chitosan under low pH conditions, but also improves its physicochemical characteristics, such as porosity, hydraulic conductivity, permeability, surface area and sorption capacity. Crosslinked chitosan is an excellent sorbent for trace metals especially because of the high flexibility of its structural stability. Sorption of trace metals by chitosan is selective and independent of the size and hardness of metal ions, or the physical form of chitosan (e.g., film, powder and solution). Both -OH and -NH2 groups in chitosan provide vital binding sites for complexing metal cations. At low pH, -NH3 + groups attract and coagulate negatively charged contaminants such as metal oxyanions, humic acids and dye molecules. Grafting certain functional molecules into the chitin structure improves sorption capacity and selectivity for remediating specific metal ions. For example, introducing sulfur and nitrogen donor ligands to chitosan alters the sorption preference for metals. Low molecular weight chitosan derivatives have been used to remediate metal contaminated soil and sediments. They have also been applied in permeable reactive barriers to remediate metals in soil and groundwater. Both chitosan and modified chitosan have been used to phytoremediate metals; however, the mechanisms by which they assist in mobilizing metals are not yet well understood. In addition, microbes have been used in combination with chitosan to remediate metals (e.g., Cu and Zn) in contaminated soils. Chitosan has also been used to remediate organic contaminants, such as oil-based wastewater, dyes, tannins, humic acids, phenols, bisphenoi-A, p-benzoquinone, organo-phosphorus insecticides, among others. Chitosan has also been utilized to develop optical and electrochemical sensors for in-situ detection of trace contaminants. In sensor technology, naturally-derived chitosan is used primarily as an immobilizing agent that results from its enzyme compatibility, and stabilizing effect on nanoparticles. Contaminant-sensing agents, such as enzymes, microbes and nanoparticles, have been homogeneously immobilized in chitosan gels by using coagulating (e.g., alginate, phosphate) or crosslinking agents (e.g., GA, ECH). Such immobilization maintains the stability of sensing elements in the chitosan gel phase, and prevents inactivation and loss of the sensing agent. In this review, we have shown that chitosan, an efficient by-product of a waste biomaterial, has great potential for many environmental applications. With certain limitations, chitosan and its derivatives can be used for remediating contaminated soil and wastewater. Notwithstanding, further research is needed to enhance the physicochemical properties of chitosan and mitigate its deficiencies.

Mushroom as a product and their role in mycoremediation

Mushroom has been used for consumption as product for a long time due to their flavor and richness in protein. Mushrooms are also known as mycoremediation tool because of their use in remediation of different types of pollutants. Mycoremediation relies on the efficient enzymes, produced by mushroom, for the degradation of various types of substrate and pollutants. Besides waste degradation, mushroom produced a vendible product for consumption. However, sometimes they absorb the pollutant in their mycelium (biosorption process) and cannot be consumed due to absorbed toxicants. This article reviews the achievement and current status of mycoremediation technology based on mushroom cultivation for the remediation of waste and also emphasizes on the importance of mushroom as product. This critical review is also focused on the safety aspects of mushroom cultivation on waste.

Biosorption of Cr(VI) by free and immobilized Pediastrum boryanum biomass: equilibrium, kinetic, and thermodynamic studies

BACKGROUND AND PURPOSE

The biosorption of Cr(VI) from aqueous solution has been studied using free and immobilized Pediastrum boryanum cells in a batch system. The algal cells were immobilized in alginate and alginate-gelatin beads via entrapment, and their algal cell free counterparts were used as control systems during biosorption studies of Cr(VI).

METHODS

The changes in the functional groups of the biosorbents formulations were confirmed by Fourier transform infrared spectra. The effect of pH, equilibrium time, initial concentration of metal ions, and temperature on the biosorption of Cr(VI) ion was investigated.

RESULTS

The maximum Cr(VI) biosorption capacities were found to be 17.3, 6.73, 14.0, 23.8, and 29.6 mg/g for the free algal cells, and alginate, alginate-gelatin, alginate-cells, and alginate-gelatin-cells at pH 2.0, which are corresponding to an initial Cr(VI) concentration of 400 mg/L. The biosorption of Cr(VI) on all the tested biosorbents (P. boryanum cells, alginate, alginate-gelatin, and alginate-cells, alginate-gelatin-cells) followed Langmuir adsorption isotherm model.

CONCLUSION

The thermodynamic studies indicated that the biosorption process was spontaneous and endothermic in nature under studied conditions. For all the tested biosorbents, biosorption kinetic was best described by the pseudo-second-order model.