Investigation of short-term stability in high efficiency polymer : nonfullerene solar cells via quick current-voltage cycling method

Low-Voltage Organic Nonvolatile Memory Transistors with Water-Soluble Polymers Containing Thermally Induced Radical Dipoles

A water-soluble acidic polymer, poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPSA), was applied as a gate-insulating layer for organic field-effect transistors (OFETs). Before depositing the poly(3-hexylthiophene) (P3HT) channel layers, the PAMPSA layers were subjected to thermal treatment at various temperatures from 140 to 230 °C. The OFET performance was greatly enhanced by thermal treatment between 140 and 170 °C, whereas it became very poor at higher temperatures (200-230 °C). In particular, the transfer curves showed pronounced hysteresis phenomena at 170 °C. Various measurements including thermogravimetric analysis and X-ray photoelectron spectroscopy disclosed that the PAMPSA chains underwent thermal degradation from ca. 160 °C and could generate carbon radicals leading to the formation of dipoles with the nitrogen lone pair electrons. The carbon-nitrogen dipoles delivered hysteresis phenomena to the OFETs with the PAMPSA layers treated at 170 °C, which exhibited excellent memory retention characteristics up to 10 000 cycles even at -1 V. Hence, it is expected that the thermally treated PAMPSA layers can be used as one of the viable gate-insulating memory materials for low-voltage transistor-type organic memory devices (TOMDs).

Multistacked Detectors with Transparency-Controlled Polymer:Nonfullerene Bulk Heterojunction Sensing Layers for Visible Light Communications

Here, we report multistacked organic photodiodes (OPDs) for potential light-fidelity (Li-Fi) detectors in visible light communications. The multistacked detectors were fabricated by integrating semitransparent inverted-type OPDs with polymer:nonfullerene bulk heterojunction (BHJ) layers. The thickness of BHJ sensing layers in the inverted-type OPDs was controlled to 30, 60, and 100 nm for top, middle, and bottom cells in the multistacked detectors, respectively, while 30 nm thick metal (silver) electrodes were used for securing both electrical conductivity and optical transparency. Results showed that each OPD cell in the multistacked detectors could deliver exact current signals upon illumination with a modulated white light from inorganic light-emitting diode lamp. The current signal from each OPD cell was linearly decreased as the modulation frequency of white light increased, supporting a stable operation of the multistacked detectors. Finally, the present multistacked detectors were able to exactly detect the programmed Li-Fi signals with a particular digitized information.

Synthesis of indacenodithienothiophene-based conjugated polymers containing electron-donating/accepting comonomers and their phototransistor characteristics

IDTT-based conjugated polymers with electron-accepting comonomers exhibit higher hole mobility (10-fold) and photoresponsivity (2-fold) than those with electron-donating comonomers.