Novel application of the esterification product of 2,3-dihydroxybutanedioic acid and cellulosic biomass for cobalt ion adsorption

Removal of Toxic Lead from Wastewater by Lupinus albus Seed Hull

In this work, we address two concerns at once: waste reduction and the development of a lead removal adsorbent. The potential of Lupinus albus seed hull (LSH) powder as an efficient, innovative, and economical adsorbent for Pb(II) absorption was examined in this study. Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, and scanning electron microscopy investigations were used to determine the structural and morphological properties of the LSH adsorbent. The adsorption process was studied in batch mode with multiple process variables (adsorbent dosage of 4.0-20 g/L; solution pH of 1.5-5.5; contact time of 15-70 min). By fitting the equilibrium data to the Langmuir isotherm model, the maximum adsorption capacity of Pb(II) was 357.14 mg/g at optimized pH (5.5), LSH dose (0.4 g), and interaction time (60 min) with starting Pb(II) concentration of 50 mg L-1. As for the reaction kinetics, the pseudo-second-order model was shown to be a convenient match. LSH can be reused after four desorption/adsorption cycles and has a high potential for eliminating Pb(II) from wastewater.

Experimental evaluation of cobalt adsorption capacity of walnut shell by organic acid activation

Cobalt, from industrial waste and nuclear laundry, possess health risk to human beings, animals and plants. Number of methods, other than adsorption, have been reported in literature for Co removal from waste water. In this research walnut shell powder after modification has been utilized for Co adsorption. First step of modification involved chemical treatment by four different organic acids for 72 h. Samples were collected at 24, 48 and 72 h. Second step involved thermal treatment of 72 h samples. Unmodified and modified particles have been analyzed by chemical methods and instruments i.e. UV spectrometer, FTIR, cyclic voltammetry (CV) and microscopic imaging. Thermally treated samples have shown augmented Co adsorption. CV analysis showed thermally treated samples with better capacitance. Particles modified by oxalic acid presented better Co adsorption. Oxalic acid treated particles activated for 72 h with thermal treatment provided maximum adsorption capacity 1327 ± 20.6 mg/g against Co(II) at pH 7, stirring 200 rpm, initial concentration 20 ml, adsorbent dosage (5 mg) and contact time 240 min at room temperature.