Drug-eluting stents for cardiovascular disorders

Coronary stent CD31-mimetic coating favours endothelialization and reduces local inflammation and neointimal development in vivo

AIMS

The rapid endothelialization of bare metal stents (BMS) is counterbalanced by inflammation-induced neointimal growth. Drug-eluting stents (DES) prevent leukocyte activation but impair endothelialization, delaying effective device integration into arterial walls. Previously, we have shown that engaging the vascular CD31 co-receptor is crucial for endothelial and leukocyte homeostasis and arterial healing. Furthermore, we have shown that a soluble synthetic peptide (known as P8RI) acts like a CD31 agonist. The aim of this study was to evaluate the effect of CD31-mimetic metal stent coating on the in vitro adherence of endothelial cells (ECs) and blood elements and the in vivo strut coverage and neointimal growth.

METHODS AND RESULTS

We produced Cobalt Chromium discs and stents coated with a CD31-mimetic peptide through two procedures, plasma amination or dip-coating, both yielding comparable results. We found that CD31-mimetic discs significantly reduced the extent of primary human coronary artery EC and blood platelet/leukocyte activation in vitro. In vivo, CD31-mimetic stent properties were compared with those of DES and BMS by coronarography and microscopy at 7 and 28 days post-implantation in pig coronary arteries (n = 9 stents/group/timepoint). Seven days post-implantation, only CD31-mimetic struts were fully endothelialized with no activated platelets/leukocytes. At day 28, neointima development over CD31-mimetic stents was significantly reduced compared to BMS, appearing as a normal arterial media with the absence of thrombosis contrary to DES.

CONCLUSION

CD31-mimetic coating favours vascular homeostasis and arterial wall healing, preventing in-stent stenosis and thrombosis. Hence, such coatings seem to improve the metal stent biocompatibility.

Comparison of the linking arm effect on the biological performance of a CD31 agonist directly grafted on L605 CoCr alloy by a plasma-based multistep strategy

Stents are cardiovascular implants deployed on atherosclerotic arteries that aid in reopening, sustaining, and avoiding their collapse. Nevertheless, postimplantation complications exist, and the risk of the renewal of the plaque subsists. Therefore, enhanced properties are mandatory requirements for clinics. For that purpose, a novel approach allowing the direct-grafting of bioactive molecules on cobalt-chromium devices (L605) has been developed. This original strategy involves the direct plasma functionalization of metallic surfaces with primary amines (-NH₂). These groups act as anchor points to covalently graft biomolecules of interest, herein a peptide derived from CD31 (P23) with proendothelialization and antithrombotic properties. However, the biological activity of the grafted peptide could be impacted by its conformation. For this study, glutaric anhydride (GA), a short chain spacer, and polyethylene glycol (PEG) with antifouling properties were used as linking arms (LAs). The covalent grafting of the CD31 agonist on L605 by different LAs (GA-P23 and PEG-P23) was confirmed by XPS and ToF-SIMS analyses. The biological performance of these functionalized surfaces showed that, compared to the electropolished (EP) alloy, grafting the P23 with both LA increases adhesion and proliferation of endothelial cells (ECs) since day 1: EP = 68 ± 10%, GA-P23 = 101 ± 7%, and PEG-P23 = 106 ± 5% of cell viability. Moreover, ECs formed a complete monolayer at the surface, preventing clot formation (hemoglobin-free >80%). The potential of this plasma-based strategy for cardiovascular applications was confirmed by promoting a fast re-endothelialization, by improving the hemocompatibility of the alloy when coupled with the CD31 agonist and by its transfer onto commercial L605 stents, as confirmed by ToF-SIMS.

New developments in ureteral stent design, materials and coatings

Ureteral stents are used in a variety of urological diseases and procedures. The majority of patients with indwelling ureteral stents experience bothersome symptoms and are at increased risk for urinary tract infection. Stent encrustation and the associated complications can also result in significant patient morbidity. The development of new stent designs using novel biomaterials, stent coatings and drug-eluting technologies are being applied to reduce the disadvantageous features of ureteral stents.

Drug-eluting stent restenosis: effect of drug type, release kinetics, hemodynamics and coating strategy

Restenosis following stent implantation diminishes the procedure's efficacy influencing long-term clinical outcomes. Stent-based drug delivery emerged a decade ago as an effective means of reducing neointimal hyperplasia by providing localized pharmacotherapy during the acute phase of the stent-induced injury and the ensuing pathobiological mechanisms. However, drug-eluting stent (DES) restenosis may still occur especially when stents are used in complex anatomical and clinical scenarios. A DES consists of an intravascular metallic frame and carriers which allow controlled release of active pharmaceutical agents; all these components are critical in determining drug distribution locally and thus anti-restenotic efficacy. Furthermore, dynamic flow phenomena characterizing the vascular environment, and shear stress distribution, are greatly influenced by stent implantation and play a significant role in drug deposition and bioavailability within local vascular tissue. In this review, we discuss the performance of DES and the interaction of the different DES components with the hemodynamic milieu emphasizing on the inhibition of clinical restenosis.

Factors that affect mass transport from drug eluting stents into the artery wall

Coronary artery disease can be treated by implanting a stent into the blocked region of an artery, thus enabling blood perfusion to distal vessels. Minimally invasive procedures of this nature often result in damage to the arterial tissue culminating in the re-blocking of the vessel. In an effort to alleviate this phenomenon, known as restenosis, drug eluting stents were developed. They are similar in composition to a bare metal stent but encompass a coating with therapeutic agents designed to reduce the overly aggressive healing response that contributes to restenosis. There are many variables that can influence the effectiveness of these therapeutic drugs being transported from the stent coating to and within the artery wall, many of which have been analysed and documented by researchers. However, the physical deformation of the artery substructure due to stent expansion, and its influence on a drugs ability to diffuse evenly within the artery wall have been lacking in published work to date. The paper highlights previous approaches adopted by researchers and proposes the addition of porous artery wall deformation to increase model accuracy.

Vitamin A: a drug for prevention of restenosis/reocclusion after percutaneous coronary intervention?

The re-establishment of adequate blood flow in a vessel with a reduced lumen due to an atherosclerotic plaque by percutaneous vascular intervention is a well established procedure. However, the long-term outcome of such interventions is negatively influenced by the development of intimal hyperplasia/restenosis. Although extensively researched, this still represents a significant clinical problem. Retinoids, i.e. natural and synthetic derivates of vitamin A, represent a potential therapeutic compound, since they have been shown to influence the vast majority of processes that ultimately lead to reocclusion of the injured vessel. Retinoids exert their effects at the transcriptional level through their nuclear receptors. Targeting multiple processes, i.e. proliferation, migration, extracellular matrix composition and cell differentiation, as well as coagulation/fibrinolysis, should increase their future role in the prevention of restenosis. The purpose of this review is to summarize the diverse effects of retinoids on pathobiological and biological processes activated at sites of vascular injury with particular emphasis on intimal hyperplasia/restenosis after endovascular interventions.

Drug-eluting stents: a multidisciplinary success story

Coronary stenting is the most common form of interventional treatment for symptomatic coronary artery disease. In-stent restenosis following bare metal stent (BMS) placement is the most common cause of procedural failure and occurs as a result of vessel wall trauma secondary to balloon angioplasty and stent deployment that results in an overly aggressive healing response (neointimal hyperplasia) that overgrows the stent lumen and causes vascular narrowing. Drug-eluting stents (DES) are specialized vascular stents capable of delivering drugs to the arterial wall in a controlled manner such that neointimal hyperplasia is reduced or prevented, luminal patency is preserved, coronary blood flow is maintained and the patient is spared a repeat procedure to re-open the vessel. The objectives of the review are to provide an overview of the major contributions that a broad range of disciplines have made to the design and development of drug-eluting stents and to summarize future directions of these fields of research. Engineers and biomaterials scientists have explored relationships between stent design and stent performance and work continues to optimize stent design and biocompatibility of stent biomaterials. Pharmaceutical scientists are continually expanding the range of candidate drugs for pharmacological intervention, and improving the technology using novel coatings to modulate drug release. Clinical scientists are investigating issues such as long-term safety and efficacy, new applications of drug-eluting stents and optimal deployment techniques.

Technology insight: Novel ureteral stent materials and designs

Ureteral stents are an important tool for aiding upper urinary tract drainage, but can cause significant patient morbidity. Common problems include stent-induced pain, hematuria, dysuria, infection, and encrustation. From a urologist's perspective, stents must be easy to maneuver in the urinary tract, radiopaque, and affordable. Since the development of the modern day stent in 1978, stents have evolved to include softer biomaterials that are more resistant to encrustation and infection. An ideal biomaterial is one that is not affected by its environment and does not elicit reactive changes in surrounding tissues. To date, the ideal biomaterial or stent does not exist. This review discusses developments that address the issues of infection, biofilm formation, encrustation, and patient comfort. Stent materials including polyurethane, silicone, biodegradable substances and new combination polymers are reviewed, in addition to novel stent coatings such as heparin, hydrogel, and silver nitrate. Ureteral stent technologies currently lag behind vascular stents, particularly drug-eluting stents, but new developments will continue to improve these essential urological tools.

Drug-eluting stents: caution and concerns for long-term outcome

Recent publications on drug-eluting stents (DES) report a significant reduction in restenosis rates as compared to bare metal stents in patients mostly with single vessel disease. We have recently observed however, late stent thrombosis following CYPHER DES implantation. The patient developed a hypersensitivity reaction around stent struts limited to the polymer with aneurysmal dilatation and extensive inflammation of the arterial wall in the absence of vascular healing. This incidence promotes a cautionary view and perhaps supports the use of DES only in high-risk patients.

Intra-arterial device infections

As an increasing number and variety of prosthetic devices are used in cardiovascular medicine, novel infectious complications have been described. Infection of intra-arterial devices, including arterial closure devices, prosthetic carotid patches, coronary artery stents and endovascular stents, and stent-grafts, is now being reported. Prosthetic vascular graft infection is an older, more common, and better-characterized entity, but recent developments in the surgical management of these infections have prompted a re-examination of the syndrome. Staphylococcal species account for most intra-arterial device infections, and often, morbidity and mortality rates are high. An update on intra-arterial device infections is warranted.