Antimicrobial therapy for bone and joint infections

An antibiofilm coating of 5-aryl-2-aminoimidazole covalently attached to a titanium surface

Biofilms, especially those formed by Staphylococcus aureus, play a key role in the development of orthopedic implant infections. Eradication of these infections is challenging due to the elevated tolerance of biofilm cells against antimicrobial agents. In this study, we developed an antibiofilm coating consisting of 5-(4-bromophenyl)-N-cyclopentyl-1-octyl-1H-imidazol-2-amine, designated as LC0024, covalently bound to a titanium implant surface (LC0024-Ti). We showed in vitro that the LC0024-Ti surface reduces biofilm formation of S. aureus in a specific manner without reducing the planktonic cells above the biofilm, as evaluated by plate counting and fluorescence microscopy. The advantage of compounds that only inhibit biofilm formation without affecting the viability of the planktonic cells, is that reduced development of bacterial resistance is expected. To determine the antibiofilm activity of LC0024-Ti surfaces in vivo, a biomaterial-associated murine infection model was used. The results indicated a significant reduction in S. aureus biofilm formation (up to 96%) on the LC0024-Ti substrates compared to pristine titanium controls. Additionally, we found that the LC0024-Ti substrates did not affect the attachment and proliferation of human cells involved in osseointegration and bone repair. In summary, our results emphasize the clinical potential of covalent coatings of LC0024 on titanium implant surfaces to reduce the risk of orthopedic implant infections. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1908-1919, 2019.

Bioceramic Layers with Antifungal Properties

The sol-gel method was used to synthesize the silver doped hydroxyapatite (Ag:HAp) gels in order to produce the antifungal composite layers. The pure Ti disks were used as the substrate for the composite layers. Important information about suspensions used to make Ag:HAp composite layers were obtained from an ultrasonic technique. The identification of the phase composition of the Ag:HAp composite layers was accomplished X-ray diffraction (XRD). The morphology and the thickness of the layers was evaluated using scanning electron microscopy (SEM). The uniform distribution of the constituent elements (Ag, Ca, P, and O) in both analyzed samples was observed. The antifungal activity of the samples against Candida albicans ATCC 10231 microbial strain were investigated immediately after their preparation and six months later. SEM and confocal laser scanning microscopy (CLSM) images showed that the composite layers at the two time intervals exhibited a strong antifungal activity against Candida albicans ATCC 10231 and completely inhibited the biofilm formation.

Covalent immobilization of antimicrobial agents on titanium prevents Staphylococcus aureus and Candida albicans colonization and biofilm formation

OBJECTIVES

Biofilm-associated implant infections represent a serious public health problem. Covalent immobilization of antimicrobial agents on titanium (Ti), thereby inhibiting biofilm formation of microbial pathogens, is a solution to this problem.

METHODS

Vancomycin (VAN) and caspofungin (CAS) were covalently bound on Ti substrates using an improved processing technique adapted to large-scale coating of implants. Resistance of the VAN-coated Ti (VAN-Ti) and CAS-coated Ti (CAS-Ti) substrates against in vitro biofilm formation of the bacterium Staphylococcus aureus and the fungal pathogen Candida albicans was determined by plate counting and visualized by confocal laser scanning microscopy. The efficacy of the coated Ti substrates was also tested in vivo using an adapted biomaterial-associated murine infection model in which control-Ti, VAN-Ti or CAS-Ti substrates were implanted subcutaneously and subsequently challenged with the respective pathogens. The osseointegration potential of VAN-Ti and CAS-Ti was examined in vitro using human bone marrow-derived stromal cells, and for VAN-Ti also in a rat osseointegration model.

RESULTS

In vitro biofilm formation of S. aureus and C. albicans on VAN-Ti and CAS-Ti substrates, respectively, was significantly reduced compared with biofilm formation on control-Ti. In vivo, we observed over 99.9% reduction in biofilm formation of S. aureus on VAN-Ti substrates and 89% reduction in biofilm formation of C. albicans on CAS-Ti substrates, compared with control-Ti substrates. The coated substrates supported osseointegration in vitro and in vivo.

CONCLUSIONS

These data demonstrate the clinical potential of covalently bound VAN and CAS on Ti to reduce microbial biofilm formation without jeopardizing osseointegration.

MRSA in Croatia: prevalence and management

Infections caused by methicillin-resistant Staphylococcus aureus (MRSA) are associated with increased morbidity, mortality and length of hospital stay. MRSA is a major pathogen in hospitals and an important pathogen in community infections with few severe and fatal cases. However, MRSA causes the majority of skin and soft tissue infections in the US. The burden of community MRSA is much smaller in Europe, but there are reports of livestock-associated MRSA (LA-MRSA) isolated from pigs and cattle causing significant infections in the people who are connected to these farms. MRSA has been present in Croatia for more than 45 years, and it exerts a different impact on health-care infections. A remarkable increase in MRSA percentage was noted in primarily sterile samples in 2002 (37%) in comparison to 2001 (31%). This percentage remained quite high until 2008, when the first signs of a reduced trend were observed. The lowest percentage was 22% in 2012.

Tetracycline tethered to titanium inhibits colonization by Gram-negative bacteria

As peri-prosthetic infection is one of the most devastating complications associated with implant placement, we have reasoned that such infection can be largely subverted by development of antibacterial implants. Our previous work demonstrated that covalent coupling of vancomycin to titanium alloy prevented colonization by the Gram-positive pathogens, Staphylococcus aureus and Staphylococcus epidermidis. Some orthopedic devices, including permanent prosthesis anchors, and most dental implants are transcutaneous or transmucosal and can be prone to colonization by Gram-negative pathogens. We report here the successful covalent coupling of the broad-spectrum antibiotic, tetracycline (TET), to titanium surfaces (Ti-TET) to retard Gram-negative colonization. Synthetic progress was followed by changes in water contact angle, while the presence of TET was confirmed by immunofluorescence. Ti-TET actively prevented colonization in the presence of bathing Escherichia coli, both by fluorescence microscopy and direct counting. Finally, the Ti-TET surface supported osteoblastic cell adhesion and proliferation over a 72-h period. Thus, this new surface offers a powerful means to protect transcutaneous implants from adhesion of Gram-negative pathogens, decreasing the need for replacement of this hardware.

Epidemiology of septic arthritis of the knee at Hospital das Clínicas, Universidade de São Paulo

Background

Septic arthritis is an infrequent disease although very important due to the possibility of disastrous outcomes if treatment is not adequately established. Adequate information concerning the epidemiology of septic arthritis is still lacking due to the uncommon nature of the disease as well as the struggle to establish a correct case-definition.

Objective

To epidemiologically characterize the population seen at Hospital das Clínicas, University of São Paulo with a diagnosis of septic arthritis between 2006 and 2011.

Methods

Sixty-one patients diagnosed with septic arthritis of the knee between 2006 and 2011 were retrospectively evaluated. The patients’ clinical and epidemiological characteristics, the microorganisms that caused the infection and the patients’ treatment and evolution were analyzed.

Results

Septic arthritis of the knee was more common among men, with distribution across a variety of age ranges. Most diagnoses were made through positive synovial fluid cultures. The most prevalent clinical comorbidities were systemic arterial hypertension and diabetes mellitus, and the most commonly reported joint disease was osteoarthritis. Staphylococcus aureus was the prevailing pathogen. Fever was present in 36% of the cases. All patients presented elevation in inflammatory tests. Gram staining was positive in only 50.8% of the synovial fluid samples analyzed. Six patients presented complications and unfavorable evolution of their condition.

Conclusion

S. aureus is still the most common pathogen in acute knee infections in our environment. Gram staining, absence of fever and normal leukocyte count cannot be used to rule out septic arthritis.

Osteomyelitis: an overview of antimicrobial therapy

Osteomyelitis is an inflammatory bone disorder caused by infection, leading to necrosis and destruction of bone. It can affect all ages, involve any bone, become a chronic disease and cause persistent morbidity. Treatment of osteomyelitis is challenging particularly when complex multiresistant bacterial biofilm has already been established. Bacteria in biofilm persist in a low metabolic phase, causing persistent infection due to increased resistance to antibiotics. Staphylococcus aureus and Staphylococcus epidermidis are the most common causative organism responsible for more than 50% of osteomyelitis cases. Osteomyelitis treatment implies the administration of high doses of antibiotics (AB) by means of endovenous and oral routes and should take a period of at least 6 weeks. Local drug delivery systems, using non-biodegradable (polymethylmethacrylate) or biodegradable and osteoactive materials such as calcium orthophosphates bone cements, have been shown to be promising alternatives for the treatment of osteomyelitis. These systems allow the local delivery of AB in situ with bactericidal concentrations for long periods of time and without the toxicity associated with other means of administration. This review examines the most recent literature evidence on the causes, pathogeneses and pharmacological treatment of osteomyelitis. The study methodology consisted of a literature review in Google Scholar, Science Direct, Pubmed, Springer link, B-on. Papers from 1979 till present were reviewed and evaluated.

Controlling the biological function of calcium phosphate bone substitutes with drugs

There is a growing interest in bone tissue engineering for bone repair after traumatic, surgical or pathological injury, such as osteolytic tumor or osteoporosis. In this regard, calcium phosphate (CaP) bone substitutes have been used extensively as bone-targeting drug-delivery systems. This localized approach improves the osteogenic potential of bone substitutes by delivering bone growth factors, thus extending their biofunctionality to any pathological context, including infection, irradiation, tumor and osteoporosis. This review briefly describes the physical and chemical processes implicated in the preparation of drug-delivering CaPs. It also describes the impact of these processes on the intrinsic properties of CaPs, especially in terms of the drug-release profile. In addition, this review focuses on the potential influence of drugs on the resorption rate of CaPs. Interestingly, by modulating the resorption parameters of CaP biomaterials, it should be possible to control the release of bone-stimulating ions, such as inorganic phosphate, in the vicinity of bone cells. Finally, recent in vitro and in vivo evaluations are extensively reported.

Vancomycin containing PLLA/β-TCP controls MRSA in vitro

BACKGROUND

Osteomyelitis caused by Methicillin-resistant Staphylococcus aureus (MRSA) often requires surgery and prolonged systemic antibiotic treatment. Local antibiotic delivery systems of bioceramics or polymers have been developed to treat osteomyelitis. A disadvantage of biodegradable polymers is the initial burst of antibiotics into the environment; one advantage of bioceramics is its osteoconductivity. We therefore developed a vancomycin-containing poly-l-lactic acid/β-tricalcium phosphate (PLLA/β-TCP) composite to control antibiotic release and stimulate bone formation.

QUESTIONS/PURPOSES

We (1) characterized these composites, (2) assessed vancomycin release in inhibitory doses, and (3) determined whether they would permit cell adhesion, proliferation, and mineralization in vitro.

METHODS

We molded 250 vancomycin-containing (VC) and 125 vancomycin-free (VUC) composites using PLLA, β-TCP, and chloroform. One hundred twenty-five VC composites were further dip-coated with PLLA (CVC) to delay antibiotic release. Composites were characterized according to their pore structure, size, volume, density, and surface area. Vancomycin release and bioactivity were determined. Adhesion, proliferation, and mineralization were assessed for two and three replicates on Days 3 and 7 with mesenchymal stem (MSC) and Saos type 2 cells.

RESULTS

Pore size, volume, apparent density, and surface area of the CVC were 3.5 ± 1.9 μm, 0.005 ± 0.002 cm(3)/g, 1.18 g/cm(3) and 3.68 m(2)/g, respectively. CVC released 1.71 ± 0.13 mg (63.1%) and 2.49 ± 0.64 mg (91.9%) of its vancomycin on Day 1 and Week 6, respectively. MSC and Saos type 2 cells attached and proliferated on composites on Days 3 and 7.

CONCLUSIONS

Vancomycin-containing PLLA/β-TCP composites release antibiotics in inhibitory doses after dip coating and appeared biocompatible based on adhesion, proliferation, and mineralization.

CLINICAL RELEVANCE

Vancomycin-containing PLLA/β-TCP composites may be useful for controlling MRSA but will require in vivo confirmation.

Calcium Phosphate Ceramics as Bone Drug-Combined Devices

The use of bone grafts is constantly increasing, their employ is principally linked to bone trauma, prosthesis revision surgery, and arthrodesis applications. In the case of biological bone grafts and depending on the origin of the graft, these grafts are classified as autografts, allografts, or xenografts. The autograft is the most commonly used and corresponds to a fresh bone graft harvesting taken from a second operating site, i.e. iliac crest, parietal bone, tibial plateaux or the fibula. The autograft has many advantages in terms of biotolerance and osteogenic potential, which justify its widespread utilization in reconstructive surgery[1]. From a practical point of view, sampling and grafting take place during the same surgical session. However, the longer exposure to the anesthetic and the surgical operation per se increases the risk of complications. For example, this procedure results in sever post-operation pain, iliac hernias, or even haemorrhages[2]. Furthermore, the volume of the bone graft taken is generally limited to 20 cm3. In the case of allografts, it generally leads to an acute inflammatory reaction which participates to the resorption/substitution process. Xenografts are less used since it involves a donor and a recipient from different species.