In Vitro Susceptibility Testing in Fungi: What is its Role in Clinical Practice?

New Antifungal Susceptibility Test Based on Chitin Detection by Image Cytometry

The antifungal susceptibility tests used in clinical laboratories have several limitations. We developed a new test, SensiFONG, based on the detection of chitin levels after exposure to antifungal drugs. The optimal culture conditions were 30°C for 6 h for yeast strains and 26°C for 16 h for molds. The strains were exposed to a range of echinocandin or azole concentrations. Chitin was stained with calcofluor white. The percentage of fungal cells with high chitin levels was determined with an automatic epifluorescence microscope. The SensiFONG results were compared to those with the EUCAST method. Image acquisition and analysis were performed with ScanR software. Fifty-nine strains (28 Candida albicans, 17 Candida glabrata, and 14 Aspergillus fumigatus) were analyzed. Thresholds for the classification of strains as resistant or susceptible were determined for each fungal species. The strains displaying an increase in chitin content of ≥32% for C. albicans, ≥6% for C. glabrata, and ≥17% for A. fumigatus were considered susceptible. The application of these thresholds to all 59 strains resulted in a sensitivity of 0.87, 0.93, and 1.00 and a specificity of 0.93, 0.84, and 0.82 for C. albicans, C. glabrata, and A. fumigatus, respectively. The correlation between the results obtained in the SensiFONG and EUCAST assays was excellent. We developed a new test, SensiFONG, based on a new concept. While current assays assess growth inhibition, our test detects changes in chitin levels after exposure to antifungal drugs. Here, we present preliminary results and we propose a proof of concept of this methodology.

Evaluation of a novel oxiconazole nitrate formulation: The thermosensitive gel

Superficial fungal infections caused by Candida species are common skin diseases. Therefore, this study aimed to develop a new formulation containing oxiconazole nitrate, which is an azole group derivative for antifungal treatment, as a thermosensitive gel since there has been no literature study until now. MIC value of the novel thermosensitive formulation against three Candida species was calculated and time-dependent antifungal activity analysis was performed. Viscosity, transition temperature Tsol-gel (°C) and gelation time of the thermosensitive gel formulation were also determined in the viscometer. The measurements performed on the tensilometer device were analyzed for adhesion hardness and elongation percentages of the formulation. In the FT-IR spectrometer, the spectrum of solution and gel state was compared between 650 and 4000 cm-1 and it was found that there is no difference between them. It was found that the temperature is reversible on the formulation and did not cause any disruption of its components. Characterization parameters of the thermosensitive gel formulation containing oxiconazole nitrate and time-dependent activity against Candida species was observed to be the same as those of the solution containing only oxiconazole nitrate. MIC, MFC and time-dependent antifungal analysis did not show any particular difference between formulation and oxiconazole nitrate itself. Thermosensitive gel formulation containing oxiconazole nitrate was found to be effective on superficial fungal infections. We believe it is also appropriate for in vivo usage, but it is necessary to perform animal and human research. It is also needed to evaluate the formulation against other etiologic agents of superficial fungal infections.

The future of fungal susceptibility testing

ABSTRACT 

The antifungal treatment failures and the emergence of resistant fungal strains have stimulated the need for reproducible and clinically relevant antifungal susceptibility testing (AFST). While the standard reference methods are not intended for routine use, commercial methods are widely used for performing AFST. However, to accelerate AFST and to improve the detection of antifungal resistance, which is the most challenging goal of AFST, novel assays have been developed. Following brief drug exposures of fungal cells, the new antifungal susceptibility end points seem to provide a reliable means of identifying fungal isolates, which harbor mutations that have been associated with antifungal resistance. This article summarizes the recent progress in AFST that is destined to enhance its clinical utility in the near future.

Echinocandin and triazole antifungal susceptibility profiles for clinical opportunistic yeast and mold isolates collected from 2010 to 2011: application of new CLSI clinical breakpoints and epidemiological cutoff values for characterization of geographic and temporal trends of antifungal resistance

The SENTRY Antimicrobial Surveillance Program monitors global susceptibility and resistance rates of newer and established antifungal agents. We report the echinocandin and triazole antifungal susceptibility patterns for 3,418 contemporary clinical isolates of yeasts and molds. The isolates were obtained from 98 laboratories in 34 countries during 2010 and 2011. Yeasts not presumptively identified by CHROMagar, the trehalose test, or growth at 42°C and all molds were sequence identified using internal transcribed spacer (ITS) and 28S (yeasts) or ITS, translation elongation factor (TEF), and 28S (molds) genes. Susceptibility testing was performed against 7 antifungals (anidulafungin, caspofungin, micafungin, fluconazole, itraconazole, posaconazole, and voriconazole) using CLSI methods. Rates of resistance to all agents were determined using the new CLSI clinical breakpoints and epidemiological cutoff value criteria, as appropriate. Sequencing of fks hot spots was performed for echinocandin non-wild-type (WT) strains. Isolates included 3,107 from 21 Candida spp., 146 from 9 Aspergillus spp., 84 from Cryptococcus neoformans, 40 from 23 other mold species, and 41 from 9 other yeast species. Among Candida spp., resistance to the echinocandins was low (0.0 to 1.7%). Candida albicans and Candida glabrata that were resistant to anidulafungin, caspofungin, or micafungin were shown to have fks mutations. Resistance to fluconazole was low among the isolates of C. albicans (0.4%), Candida tropicalis (1.3%), and Candida parapsilosis (2.1%); however, 8.8% of C. glabrata isolates were resistant to fluconazole. Among echinocandin-resistant C. glabrata isolates from 2011, 38% were fluconazole resistant. Voriconazole was active against all Candida spp. except C. glabrata (10.5% non-WT), whereas posaconazole showed decreased activity against C. albicans (4.4%) and Candida krusei (15.2% non-WT). All agents except for the echinocandins were active against C. neoformans, and the triazoles were active against other yeasts (MIC90, 2 μg/ml). The echinocandins and triazoles were active against Aspergillus spp. (MIC90/minimum effective concentration [MEC90] range, 0.015 to 2 μg/ml), but the echinocandins were not active against other molds (MEC90 range, 4 to >16 μg/ml). Overall, echinocandin and triazole resistance rates were low; however, the fluconazole and echinocandin coresistance among C. glabrata strains warrants continued close surveillance.

Brazilian guidelines for the management of candidiasis - a joint meeting report of three medical societies: Sociedade Brasileira de Infectologia, Sociedade Paulista de Infectologia and Sociedade Brasileira de Medicina Tropical

Candida infections account for 80% of all fungal infections in the hospital environment, including bloodstream, urinary tract and surgical site infections. Bloodstream infections are now a major challenge for tertiary hospitals worldwide due to their high prevalence and mortality rates. The incidence of candidemia in tertiary public hospitals in Brazil is approximately 2.5 cases per 1000 hospital admissions. Due to the importance of this infection, the authors provide a review of the diversity of the genus Candida and its clinical relevance, the therapeutic options and discuss the treatment of major infections caused by Candida. Each topography is discussed with regard to epidemiological, clinical and laboratory diagnostic and therapeutic recommendations based on levels of evidence.

Progress in antifungal susceptibility testing of Candida spp. by use of Clinical and Laboratory Standards Institute broth microdilution methods, 2010 to 2012

Antifungal susceptibility testing of Candida has been standardized and refined and now may play a useful role in managing Candida infections. Important new developments include validation of 24-h reading times for all antifungal agents and the establishment of species-specific epidemiological cutoff values (ECVs) for the systemically active antifungal agents and both common and uncommon species of Candida. The clinical breakpoints (CBPs) for fluconazole, voriconazole, and the echinocandins have been revised to provide species-specific interpretive criteria for the six most common species. The revised CBPs not only are predictive of clinical outcome but also provide a more sensitive means of identifying those strains with acquired or mutational resistance mechanisms. This brief review serves as an update on the new developments in the antifungal susceptibility testing of Candida spp. using Clinical and Laboratory Standards Institute (CLSI) broth microdilution (BMD) methods.

Rapid identification of Aspergillus terreus from bronchoalveolar lavage fluid by PCR and electrospray ionization with mass spectrometry

We describe the application of PCR and electrospray-ionization with mass spectrometry (PCR/ESI-MS) to culture-negative bronchoalveolar lavage (BAL) fluid in order to identify septate hyphae noted by Gomori methenamine silver (GMS) staining of the fluid that was obtained from an immunocompromised woman with neutropenia following induction chemotherapy for treatment of acute myelogenous leukemia (AML). The patient was treated with empirical antifungal therapy, including intrathecal amphotericin B, while results of fungal cultures were pending. Ultimately, Aspergillus terreus, an amphotericin-resistant mold, was cultured from bilateral brain abscesses. PCR/ESI-MS correctly identified the mold.