Clinical utility of microarchitecture measurements of trabecular bone

Trabecular Bone Score as a Risk Factor of Major Osteoporotic Fracture in Postmenopausal Women: The First Study in Thailand

OBJECTIVES

To compare the trabecular bone score (TBS) between Thai postmenopausal women with and without major osteoporotic fracture, and to determine whether TBS is associated with fracture risk.

METHODS

All postmenopausal women sent for dual-energy X-ray absorptiometry (DXA) at the Police General Hospital were retrospectively recruited. The hospital's online database and radiographs were reviewed to collect information on underlying disease, medication, previous fractures, bone mineral density, and trabecular bone score. Patients with anti-osteoporotic medication use, skeletal malignancy, fracture from high-energy trauma, and uninterpretable DXA images were excluded.

RESULTS

A total of 407 Thai postmenopausal women were enrolled. They were divided into 292 women without fractures and 115 women with major osteoporotic fractures. The fracture group was older (73.36 ± 9.95 vs. 66.00 ± 8.58, P < 0.001) and had lower serum 25-hydroxyvitamin D levels (23.28 ± 9.09 vs. 26.44 ± 9.20, P = 0.023). The mean TBS was lower in the fracture group, compared to the non-fracture group (1.244 ± 0.101 vs. 1.272 ± 0.099, P = 0.011). The subgroup analysis resulted in noticeably lower TBS in spine fracture, but not other fracture sites. The odds ratio of fracture was 1.355 (P = 0.013) for a decrease in one standard deviation of TBS.

CONCLUSIONS

TBS was significantly lower in postmenopausal women having fractures with an odd ratio of 1.355 (P = 0.013) per SD decrease in TBS. Categorizing by fracture sites, TBS was only found to be noticeably lower in the lumbar spine despite similar lumbar spine bone mineral density.

Do Porous Titanium Granule Grafts Affect Bone Microarchitecture at Augmented Maxillary Sinus Sites? A Pilot Split-Mouth Human Study

BACKGROUND

The aim of this randomized controlled clinical study was to analyze the bone microarchitecture at augmented maxillary sinus sites by using different materials in patients to compare the effect of porous titanium granules as a sinus augmentation material with bone microstructural features.

MATERIALS AND METHODS

Eight subjects with bilateral atrophic posterior maxilla of residual bone height <4 mm included in this study and each patient was treated with bilateral sinus augmentation procedure using xenograft with equine origin (Apatos, Osteobiol; Tecnoss Dental) and xenograft (1 g) + porous titanium (1 g) granules (Natix; Tigran Technologies AB). Sixteen human bone biopsy samples were taken from patients receiving two-stage sinus augmentation therapy during implant installation and analyzed using microcomputerized tomography. Three-dimensional bone structural parameters were analyzed in details: tissue volume, bone volume, percentage of bone volume, bone surface and bone surface density, bone specific surface, trabecular thickness trabecular separation, trabecular number, trabecular pattern factor, structural model index, fractal dimension, and bone mineral density.

RESULTS

No statistically significant differences were found between groups according to bone structural parameters.

CONCLUSIONS

Porous titanium grafts may ensure a space for new bone formation in the granules, which may be a clinical advantage for long-term success.

Osteoporosis prediction from the mandible using cone-beam computed tomography

PURPOSE

This study aimed to evaluate the use of dental cone-beam computed tomography (CBCT) in the diagnosis of osteoporosis among menopausal and postmenopausal women by using only a CBCT viewer program.

MATERIALS AND METHODS

Thirty-eight menopausal and postmenopausal women who underwent dual-energy X-ray absorptiometry (DXA) examination for hip and lumbar vertebrae were scanned using CBCT (field of view: 13 cm×15 cm; voxel size: 0.25 mm). Slices from the body of the mandible as well as the ramus were selected and some CBCT-derived variables, such as radiographic density (RD) as gray values, were calculated as gray values. Pearson's correlation, one-way analysis of variance (ANOVA), and accuracy (sensitivity and specificity) evaluation based on linear and logistic regression were performed to choose the variable that best correlated with the lumbar and femoral neck T-scores.

RESULTS

RD of the whole bone area of the mandible was the variable that best correlated with and predicted both the femoral neck and the lumbar vertebrae T-scores; further, Pearson's correlation coefficients were 0.5/0.6 (p value=0.037/0.009). The sensitivity, specificity, and accuracy based on the logistic regression were 50%, 88.9%, and 78.4%, respectively, for the femoral neck, and 46.2%, 91.3%, and 75%, respectively, for the lumbar vertebrae.

CONCLUSION

Lumbar vertebrae and femoral neck osteoporosis can be predicted with high accuracy from the RD value of the body of the mandible by using a CBCT viewer program.

Osteoporosis, fractures, and diabetes

It is well established that osteoporosis and diabetes are prevalent diseases with significant associated morbidity and mortality. Patients with diabetes mellitus have an increased risk of bone fractures. In type 1 diabetes, the risk is increased by ∼6 times and is due to low bone mass. Despite increased bone mineral density (BMD), in patients with type 2 diabetes the risk is increased (which is about twice the risk in the general population) due to the inferior quality of bone. Bone fragility in type 2 diabetes, which is not reflected by bone mineral density, depends on bone quality deterioration rather than bone mass reduction. Thus, surrogate markers and examination methods are needed to replace the insensitivity of BMD in assessing fracture risks of T2DM patients. One of these methods can be trabecular bone score. The aim of the paper is to present the present state of scientific knowledge about the osteoporosis risk in diabetic patient. The review also discusses the possibility of problematic using the study conclusions in real clinical practice.

Effect of nonviral plasmid delivered basic fibroblast growth factor and low intensity pulsed ultrasound on mandibular condylar growth: a preliminary study

OBJECTIVE

Basic fibroblast growth factor (bFGF) is an important regulator of tissue growth. Previous studies have shown that low intensity pulsed ultrasound (LIPUS) stimulates bone growth. The objective of this study was to evaluate the possible synergetic effect of LIPUS and local injection of nonviral bFGF plasmid DNA (pDNA) on mandibular growth in rats.

DESIGN

Groups were control, blank pDNA, bFGF pDNA, LIPUS, and bFGF pDNA + LIPUS. Treatments were performed for 28 days. Significant increase was observed in mandibular height and condylar length in LIPUS groups. MicroCT analysis showed significant increase in bone volume fraction in bFGF pDNA + LIPUS group. Histomorphometric analysis showed increased cell count and condylar proliferative and hypertrophic layers widths in bFGF pDNA group.

RESULTS

Current study showed increased mandibular condylar growth in either bFGF pDNA or LIPUS groups compared to the combined group that showed only increased bone volume fraction.

CONCLUSION

It appears that there is an additive effect of bFGF + LIPUS on the mandibular growth.

Computational anatomy in the study of bone structure

Osteoporosis is a major public health threat for millions of Americans with billions of dollars per year of national direct costs for osteoporotic fractures. Osteoporosis results in a decrease in overall bone mass and subsequent increase in the risk of bone fracture. Bone strength arises from the combination of bone size and shape, the distribution of bone mass throughout the structure, and the quality of the bone material. Advances in medical imaging have enabled a comprehensive assessment of bone structure through the analysis of high-resolution scans of relevant anatomical sites, eg, the proximal femur. However, conventional imaging analysis techniques use predefined regions of interest that do not take full advantage of such scans. Recently, computational anatomy, a set of imaging-based analysis algorithms, has emerged as a promising technique in studies of osteoporosis. Computational anatomy enables analyses that are not biased to one particular region and provide a more complete assessment of the whole structure. In this article, we review studies that have used computational anatomy to investigate the structure of the proximal femur in relation to age, fracture, osteoporotic treatment, and spaceflight effects.

Imaging technologies for assessment of skeletal health in men

Conventional radiography can detect most fractures, evaluate their healing, and visualize characteristic skeletal abnormalities for some metabolic bone diseases. Dual-energy X-ray absorptiometry (DXA) is used to measure areal bone mineral density (BMD) in order to diagnose osteoporosis, estimate fracture risk, and monitor changes in BMD over time. Vertebral fracture assessment by DXA can diagnose vertebral fractures with less ionizing radiation, greater patient convenience, and lower cost than conventional radiography. Quantitative computed tomography (QCT) measures volumetric BMD separately in cortical and trabecular bone compartments. High resolution peripheral QCT and high resolution magnetic resonance imaging are noninvasive research tools that assess the microarchitecture of bone. The use of these technologies and others has been associated with special challenges in men compared with women, provided insights into differences in the pathogenesis of osteoporosis in men and women, and enhanced understanding of the mechanisms of action of osteoporosis treatments.

[Reimbursement. Case report: Medical implication as precondition for reimbursement by German health insurance on the example of HRpQCT diagnosis of osteoporosis]

The main condition that has to be met for reimbursement is the medical implication of the chosen method. This issue is discussed based on the case of a 72-year-old patient suffering from osteoporotic fractures of the spine. Drug treatment of osteoporosis was observed with a high-resolution peripheral CT (HR-pQCT/XtremeCT). A German court came to the conclusion that there is no added value of the procedure in comparison with the well-established DXA. Judges rejected the need for reimbursement in that particular case and ruled in favor of the insurance company, which had originally refused the refund. 

Antiosteoporotic activity of Davallia formosana

ETHNOPHARMACOLOGICAL RELEVANCE

[corrected] In Taiwanese folk medicine, Davallia formosana is used to treat bone diseases, including osteoporosis.

AIM

This study evaluated the anti-osteoporotic effect of ethanolic extract derived from Davallia formosana (DFE).

MATERIALS AND METHODS

In this in vitro study, we investigated the inhibitory action of DFE on RANKL-stimulated osteoclastogenesis. The in vivo effects of DFE on bone metabolism were evaluated using ovariectomized (OVX) rats orally administered DFE (200, 500 mg/kg), alendronate (2.5 mg/kg, three times a week) or its vehicle for 12 weeks.

RESULTS

This in vitro study demonstrated that DFE inhibited osteoclast differentiation, and also isolated the active component, (-)-epicatechin 3-O-β-D-allopyranoside (ECAP). DFE did not affect the body or vaginal weight in OVX rats. The bone mineral density and bone calcium content in OVX rats were lower in the control group showing that DFE was able to prevent significant bone loss. In addition, the three point bending test and the microcomputer tomography scanning showed that DFE treatment enhanced bone strength and inhibited the deterioration of trabecular microarchitecture. In the biochemical assay, DFE decreased urinary deoxypyridinoline and calcium concentrations, but did not inhibit serum alkaline phosphatase activities, indicating that it ameliorated bone loss via inhibition of bone reabsorption.

CONCLUSIONS

These results suggest that DFE may represent a useful remedy for the treatment of bone reabsorption diseases such as osteoporosis. In addition, ECAP could be used as a marker compound to control the quality of DFE.

MRI of trabecular bone using a decay due to diffusion in the internal field contrast imaging sequence

PURPOSE

To characterize the DDIF (Decay due to Diffusion in the Internal Field) method using intact animal trabecular bone specimens of varying trabecular structure and porosity, under ex vivo conditions closely resembling in vivo physiological conditions. The DDIF method provides a diffusion contrast which is related to the surface-to-volume ratio of the porous structure of bones. DDIF has previously been used successfully to study marrow-free trabecular bone, but the DDIF contrast hitherto had not been tested in intact specimens containing marrow and surrounded by soft tissue.

MATERIALS AND METHODS

DDIF imaging was implemented on a 4.7 Tesla (T) small-bore, horizontal, animal scanner. Ex vivo results on fresh bone specimens containing marrow were obtained at body temperature. Control measurements were carried out in surrounding tissue and saline.

RESULTS

Significant DDIF effect was observed for trabecular bone samples, while it was considerably smaller for soft tissue outside the bone and for lipids. Additionally, significant differences were observed between specimens of different trabecular structure.

CONCLUSION

The DDIF contrast is feasible despite the reduction of the diffusion constant and of T(1) in such conditions, increasing our confidence that DDIF imaging in vivo may be clinically viable for bone characterization.

Bone microarchitecture at oral implant sites in ectodermal dysplasia (ED): a comparison between males and females

OBJECTIVE

The aim of this study was to analyse the microarchitecture of bone in association with implant placement in young ectodermal dysplasia (ED) patients. The general hypothesis was that the structural and morphological features of bone microarchitecture are different between males and females, which may influence clinical outcomes.

MATERIALS AND METHODS

The bone harvesting is not additionally invasive, as the procedure was made at the time and site of implant placement. Twenty one samples (8 female, 13 male) were harvested from nine ED participants whose age ranged between 14 and 21 years and specified by the site of harvesting. Micro-CT analysis at 5 µm resolution was conducted on each sample. Specialized CT analysis of the three-dimensional (3-D) bone microstructure was made to compare structural parameters. In addition, two bone samples (one male, one female) were sent to the University of Michigan and analysed at 9 µm resolution.

RESULTS

No significant difference was found between male and female samples. Bone analysis of particular sites revealed that bone-specific surface (BS/BV) was found to be significantly higher in male than in female samples, whilst the mean values of 10 parameters, the grey scale value histograms and 3-D visualization showed that female samples had higher compact density than male samples.

CONCLUSION

Microstructural analyses indicated that female ED bone was more compact and with greater trabecular connectedness than male bone. These features may enhance resistance to external force transfer of mastication compared with male bone. Further bone samples from other jaw bone areas will provide information on whether there are regional differences in jawbone quality and quantity, which may influence implant treatment outcomes, as well as follow-up analyses of treatment outcomes.

MRI texture analysis of femoral neck: Detection of exercise load-associated differences in trabecular bone

PURPOSE

To assess the ability of co-occurrence matrix-based texture parameters to detect exercise load-associated differences in MRI texture at the femoral neck cross-section.

MATERIALS AND METHODS

A total of 91 top-level female athletes representing five differently loading sports and 20 referents participated in this cross-sectional study. Axial T1-weighted FLASH and T2*-weighted MEDIC sequence images of the proximal femur were obtained with a 1.5T MRI. The femoral neck trabecular bone at the level of the insertion of articular capsule was divided manually into regions of interest representing four anatomical sectors (anterior, posterior, superior, and inferior). Selected co-occurrence matrix-based texture parameters were used to evaluate differences in apparent trabecular structure between the exercise loading groups and anatomical sectors of the femoral neck.

RESULTS

Significant differences in the trabecular bone texture, particularly at the superior femoral neck, were observed between athletes representing odd-impact (soccer and squash) and high-magnitude exercise loading (power-lifting) groups and the nonathletic reference group.

CONCLUSION

MRI texture analysis provides a quantitative method for detecting and classifying apparent structural differences in trabecular bone that are associated with specific exercise loading.

Methods for assessing bone quality: a review

BACKGROUND

Bone mass, geometry, and tissue material properties contribute to bone structural integrity. Thus, bone strength arises from both bone quantity and quality. Bone quality encompasses the geometric and material factors that contribute to fracture resistance.

QUESTIONS/PURPOSES

This review presents an overview of the methods for assessing bone quality across multiple length scales, their outcomes, and their relative advantages and disadvantages.

METHODS

A PubMed search was conducted to identify methods related to bone mechanical testing, imaging, and compositional analysis. Using various exclusion criteria, articles were selected for inclusion.

RESULTS

Methods for assessing mechanical properties include whole-bone, bulk tissue, microbeam, and micro- and nanoindentation testing techniques. Outcomes include structural strength and material modulus. Advantages include direct assessment of bone strength; disadvantages include specimen destruction during testing. Methods for characterizing bone geometry and microarchitecture include quantitative CT, high-resolution peripheral quantitative CT, high-resolution MRI, and micro-CT. Outcomes include three-dimensional whole-bone geometry, trabecular morphology, and tissue mineral density. The primary advantage is the ability to image noninvasively; disadvantages include the lack of a direct measure of bone strength. Methods for measuring tissue composition include scanning electron microscopy, vibrational spectroscopy, nuclear magnetic resonance imaging, and chemical and physical analytical techniques. Outcomes include mineral density and crystallinity, elemental composition, and collagen crosslink composition. Advantages include the detailed material characterization; disadvantages include the need for a biopsy.

CONCLUSIONS

Although no single method can completely characterize bone quality, current noninvasive imaging techniques can be combined with ex vivo mechanical and compositional techniques to provide a comprehensive understanding of bone quality.

Structural parameters of normal and osteoporotic human trabecular bone are affected differently by microCT image resolution

This study employed microCT to investigate whether image resolution affects bone structural parameters differently in healthy normal and osteoporotic trabecular bone. With increasing image voxel size, the originally detected differences between sample groups diminished. The results suggest that structural differences may not be reliably detected with clinical scanners.

INTRODUCTION

Structural parameters of bone reflect its health status, but are highly dependent on the image resolution. We hypothesized that image resolution affects bone structural parameters differently in normal and osteoporotic trabecular bone.

METHODS

Human trabecular bone samples from the iliac crest and the knee were analyzed (normal n = 11, osteoporotic n = 15) using a high-resolution microCT (14 or 18 µm voxel sizes). Images were re-sampled to voxel sizes 1-16 times larger than the original image and thresholded with global or local adaptive algorithms. Absolute and normalized values of each structural parameter were calculated, and the effect of decreasing image resolution was compared between the normal and osteoporotic samples.

RESULTS

Normal and osteoporotic samples had different (p < 0.05) absolute bone volume fractions. However, the normalized values showed that the osteoporotic samples were more prone to errors (p < 0.05) with increased voxel size. The absolute values of trabecular number, trabecular separation, degree of anisotropy, and structure model index were different between the groups at the original voxel size (p < 0.05), but at voxel sizes between 60 and 110 µm, those differences were no longer significant.

CONCLUSIONS

The results suggest that structural differences between osteoporotic and normal trabecular bone may not be reliably detected with clinical CT scanners providing image voxel sizes above 100 µm.

Automated 3D trabecular bone structure analysis of the proximal femur--prediction of biomechanical strength by CT and DXA

SUMMARY

The standard diagnostic technique for assessing osteoporosis is dual X-ray absorptiometry (DXA) measuring bone mass parameters. In this study, a combination of DXA and trabecular structure parameters (acquired by computed tomography [CT]) most accurately predicted the biomechanical strength of the proximal femur and allowed for a better prediction than DXA alone.

INTRODUCTION

An automated 3D segmentation algorithm was applied to determine specific structure parameters of the trabecular bone in CT images of the proximal femur. This was done to evaluate the ability of these parameters for predicting biomechanical femoral bone strength in comparison with bone mineral content (BMC) and bone mineral density (BMD) acquired by DXA as standard diagnostic technique.

METHODS

One hundred eighty-seven proximal femur specimens were harvested from formalin-fixed human cadavers. BMC and BMD were determined by DXA. Structure parameters of the trabecular bone (i.e., morphometry, fuzzy logic, Minkowski functionals, and the scaling index method [SIM]) were computed from CT images. Absolute femoral bone strength was assessed with a biomechanical side-impact test measuring failure load (FL). Adjusted FL parameters for appraisal of relative bone strength were calculated by dividing FL by influencing variables such as body height, weight, or femoral head diameter.

RESULTS

The best single parameter predicting FL and adjusted FL parameters was apparent trabecular separation (morphometry) or DXA-derived BMC or BMD with correlations up to r = 0.802. In combination with DXA, structure parameters (most notably the SIM and morphometry) added in linear regression models significant information in predicting FL and all adjusted FL parameters (up to R(adj) = 0.872) and allowed for a significant better prediction than DXA alone.

CONCLUSION

A combination of bone mass (DXA) and structure parameters of the trabecular bone (linear and nonlinear, global and local) most accurately predicted absolute and relative femoral bone strength.

Radiographic texture analysis of densitometric calcaneal images: relationship to clinical characteristics and to bone fragility

Osteoporotic fractures are related not only to bone mineral density (BMD) but also to bone structure or microarchitecture, which is not assessed routinely with currently available methods. We have developed radiographic texture analysis (RTA) for calcaneal images from a peripheral densitometer as an easy, noninvasive method for assessing bone structure. We conducted a cross-sectional study of the relationship between RTA and prevalent vertebral fractures (n = 148) among 900 subjects (ages 19 to 99 years, 94 males) referred for bone densitometry as part of their routine medical care. RTA features were derived from Fourier-based image analysis of the radiographic texture pattern (including root mean square, first moment, and power spectral analyses). RTA features were associated with age, weight, gender, and race, as well as glucocorticoid use. When controlling for clinical risk factors and BMD (or a summary measure calculated using FRAX algorithms), RTA features were significantly different for subjects with and without prevalent vertebral fractures [adjusted odds ratio (OR) = 1.5 per 1 standard deviation (SD) decrease in RTA feature beta, 95% confidence interval (CI) 1.2-1.8, p = .001]. Gender and use of pharmacologic therapy for osteoporosis did not significantly affect this association, suggesting that RTA can be applied to a wide range of densitometry patients. We conclude that RTA obtained using a portable instrument has a potential as a noninvasive method to enhance identification of patients at increased risk of osteoporotic fractures.

Geodesic topological analysis of trabecular bone microarchitecture from high-spatial resolution magnetic resonance images

In vivo assessment of trabecular bone microarchitecture could improve the prediction of fracture risk and the efficacy of osteoporosis treatment and prevention. Geodesic topological analysis (GTA) is introduced as a novel technique to quantify the trabecular bone microarchitecture from high-spatial resolution magnetic resonance (MR) images. Trabecular bone parameters that quantify the scale, topology, and anisotropy of the trabecular bone network in terms of its junctions are the result of GTA. The reproducibility of GTA was tested with in vivo images of human distal tibiae and radii (n = 6) at 1.5 Tesla; and its ability to discriminate between subjects with and without vertebral fracture was assessed with ex vivo images of human calcanei at 1.5 and 3.0 Tesla (n = 30). GTA parameters yielded an average reproducibility of 4.8%, and their individual areas under the curve (AUC) of the receiver operating characteristic curve analysis for fracture discrimination performed better at 3.0 than at 1.5 Tesla reaching values of up to 0.78 (p < 0.001). Logistic regression analysis demonstrated that fracture discrimination was improved by combining GTA parameters, and that GTA combined with bone mineral density (BMD) allow for better discrimination than BMD alone (AUC = 0.95; p < 0.001). Results indicate that GTA can substantially contribute in studies of osteoporosis involving imaging of the trabecular bone microarchitecture.

In vivo 7.0-tesla magnetic resonance imaging of the wrist and hand: technical aspects and applications

Magnetic resonance imaging (MRI) at 7.0 T has the potential for higher signal-to-noise ratio (SNR), improved spectral resolution, and faster imaging compared with 1.5-T and 3.0-T MR systems. This is especially interesting for challenging imaging regions like the wrist and the hand because of the small size of the visualized anatomical structures; the increase in SNR could then be directly converted into higher spatial resolution of the images. Practically, imaging at 7.0 T poses a variety of technical challenges such as static (B (0)) and radiofrequency (B (1)) homogeneities, shimming, chemical shift artifacts, susceptibility artifacts, alterations in tissue contrast, specific absorption rate limitations, coil construction, and pulse sequence tuning. Despite these limitations, this first experience in anatomical imaging of the wrist and the hand at 7.0 T is very promising. Functional imaging techniques will gain importance at ultra-high-field MRI and need to be assessed in detail in the future.

Imaging of metabolic bone diseases

Bone scintigraphy and X-ray are complementary in the assessment of Paget's disease. Whereas bone scintigraphy allows visualization of the whole skeleton and 'hot spots', X-ray enables visualization of more detailed images of the pagetic bone lesion. X-ray may be invaluable in the diagnosis of osteomalacia, especially in children. As osteomalacia is characterized by impaired bone mineralization, the use of bone density measures may lead to misinterpretation of the condition as osteoporosis. Dual-energy X-ray absorptiometry at the femoral neck is the 'gold standard' for the assessment of osteoporosis. However, all devices are useful to predict the risk of fracture. In the future, high-resolution computer tomography and magnetic resonance imaging may become valuable clinical tools, capturing the architectural aspect of bone strength and improving fracture prediction models.

In vivo trabecular bone morphologic and mechanical relationship using high-resolution 3-T MRI

OBJECTIVE

The purpose of this study was to investigate the in vivo morphologic and elastic parameters of trabecular bone with high-resolution 3-T MRI in a healthy reference population.

SUBJECTS AND METHODS

A series of wrist MR images were acquired with high-spatial-resolution (180 mum) isotropic voxels from 40 subjects without reported bone disease. After image postprocessing, the bone volume-to-total volume ratio, trabecular thickness, trabecular separation, and trabecular number were calculated in the morphologic analysis. Trabecular bone was mechanically simulated using the finite-element method to calculate the apparent elastic modulus parameter. The relationship between morphologic and mechanical parameters was studied. The influence of the analyzed bone volume was also investigated.

RESULTS

Statistically significant sex influences were found on the bone volume-to-total volume ratio (p = 0.003), trabecular thickness (p = 0.02), and apparent elastic modulus (p = 0.01); these parameters were lower in women. However, trends were found only on trabecular separation (p = 0.06) and trabecular number (p = 0.07). Age had no statistically significant influence in any morphologic (bone volume-to-total volume ratio, r = -0.24, p = 0.13; trabecular thickness, r = -0.03, p = 0.88; trabecular separation, r = 0.12, p = 0.47; and trabecular number, r = -0.23, p = 0.16) or elastic (apparent elastic modulus, r = -0.18, p = 0.26) parameter. A statistically significant relationship between apparent elastic modulus and the square of bone volume-to-total volume ratio was found (r = 0.968, p < 0.001). This association was not seen (r = 0.185, p = 0.25) and apparent elastic modulus results were considerably different (p < 0.001) if the volume of analyzed bone was reduced.

CONCLUSION

We found that bone volume-to-total volume ratio, trabecular thickness, and apparent elastic modulus are parameters significantly influenced by sex. Apparent elastic modulus results show a relationship with bone volume-to-total volume ratio. Trabecular bone volume should be maximized for an appropriate mechanical analysis.

Clinical software for the assessment of trabecular bone disease in distal radius based on a magnetic resonance structural analysis

As Bone Mineral Density has been demonstrated to be insufficient to elaborate a correct diagnosis of bone diseases such as osteoporosis, a new software tool called EsTra has been developed in order to estimate the most significant structural parameters of trabecular bone microarchitecture. In EsTra, different techniques as automated segmentation, snakes, filtering, skeletonization, voxel classification and three-dimensional reconstruction are applied to Magnetic Resonance images of distal radius and ulna. A microarchitectural study is also carried out from three different viewpoints involving morphological, topological and fractal analysis. Results can be exported to a database to help the research of the disease and a clinical report is elaborated containing the most significant parameters obtained from the analysis.

Glucocorticoid-Induced osteoporosis: clinical and therapeutic aspects

Glucocorticoid-induced osteoporosis (GIO) is the most common form of secondary osteoporosis. Fractures, which are often asymptomatic, may occur in as many as 30_50% of patients receiving chronic glucocorticoid therapy. Vertebral fractures occur early after exposure to glucocorticoids, at a time when bone mineral density (BMD) declines rapidly. Fractures tend to occur at higher BMD levels than in women with postmenopausal osteoporosis. Glucocorticoids have direct and indirect effects on the skeleton. They impair the replication, differentiation, and function of osteoblasts and induce the apoptosis of mature osteoblasts and osteocytes. These effects lead to a suppression of bone formation, a central feature in the pathogenesis of GIO. Glucocorticoids also favor osteoclastogenesis and as a consequence increase bone resorption. Bisphosphonates are the most effective of the various therapies that have been assessed for the management of GIO. Anabolic therapeutic strategies are under investigation. Teriparatide seems to be also efficacious for the treatment of patients with GIO.

Glucocorticoid-induced osteoporosis: pathophysiology and therapy

Glucocorticoid-induced osteoporosis (GIO) is the most common form of secondary osteoporosis. Fractures, which are often asymptomatic, may occur in as many as 30-50% of patients receiving chronic glucocorticoid therapy. Vertebral fractures occur early after exposure to glucocorticoids, at a time when bone mineral density (BMD) declines rapidly. Fractures tend to occur at higher BMD levels than in women with postmenopausal osteoporosis. In human subjects, the early rapid decline in BMD is followed by a slower progressive decline in BMD. Glucocorticoids have direct and indirect effects on the skeleton. The primary effects are on osteoblasts and osteocytes. Glucocorticoids impair the replication, differentiation and function of osteoblasts and induce the apoptosis of mature osteoblasts and osteocytes. These effects lead to a suppression of bone formation, a central feature in the pathogenesis of GIO. Glucocorticoids also favor osteoclastogenesis and as a consequence increase bone resorption. Bisphosphonates are effective in the prevention and treatment of GIO. Anabolic therapeutic strategies are under investigation.

Subclinical hypothyroidism is related to lower heel QUS in postmenopausal women

Recent findings suggest that thyroid stimulating hormone (TSH) is a negative regulator of skeletal remodeling by reducing both differentiation of osteoblasts and formation of osteoclasts. In addition, increased fracture risk in untreated hypothyroid patients has been reported to begin up to 8 years before diagnosis. The aim of the present study was to evaluate the effect of subclinical hypothyroidism on bone structure by using the heel QUS. Subjects were outpatients without any past or present history of thyroid disease. Among 210 postmenopausal women, 22 of 33 patients (Hypo), who had elevated serum TSH concentration (TSH>or=4 microU/ml) with normal serum free thyroxine (FT4) concentration, agreed to join to this study. We also randomly selected 24 control subjects (Cont) from 176 postmenopausal women with normal thyroid status. Calcaneus osteo sono assessment indices (OSI) of right feet were measured using the ultrasound bone densitometry AOS-100. Serum TSH concentrations in Hypo patients (5.31 +/- 1.3 microU/ml) were higher than those in Cont patients (2.05 +/- 1.1 microU/ml), and there was significant difference of FT(4) concentrations (Cont 1.33 +/- 0.15 ng/dl; Hypo 1.19 +/- 0.17 ng/dl). OSI and its Z-score in Hypo subjects (OSI, 2.138 +/- 0.152; Z-Score -0.322 +/- 0.504 SD, Mean SD) were significantly lower than those in Cont subjects (OSI, 2.347 +/- 0.243; Z-Score 0.322 +/- 0.91 SD, Mean +/- SD). Simple regression statistical analysis showed that OSI decreased according to the increase of serum TSH concentration (n = 47, P<0.037). In addition, multiple regression analysis showed that the elevation of serum TSH concentration was associated with the decrease of OSI. These results suggest that the elevation of serum TSH concentration in subclinical hypothyroidism affects not bone turnover but bone structure as assessed by QUS.