Vibrational spectroscopic imaging for the evaluation of matrix and mineral chemistry

Fluoride-induced osteoporosis via interfering with the RANKL/RANK/OPG pathway in ovariectomized rats: Oophorectomy shifted skeletal fluorosis from osteosclerosis to osteoporosis

Osteosclerosis and osteoporosis are the two main clinical manifestations of skeletal fluorosis. However, the reasons for the different clinical manifestations are unclear. In this study, we established the fluoride (F) -exposed ovariectomized (OVX) and non-OVX rat models to assess the potential role of ovarian function loss in osteosclerosis and osteoporosis. Micro-CT scanning showed that excessive F significantly induced a high bone mass in non-OVX rats. In contrast, a low bone mass manifestation was presented in OVX F-exposed rats. Also, a prominent feature of increasing trabecular connectivity, collagen area, growth plate thickness, and reduced trabecular space was found by histopathological morphology in non-OVX F-exposed rats; an opposite result was observed in OVX F-exposed. These alterations indicated ovariectomy was a vital factor leading to osteosclerosis or osteoporosis in skeletal fluorosis. Furthermore, levels of bone alkaline phosphatase (BALP) and tartrate-resistant acid phosphatase (TRAP) increased, combined with the increasing osteoclasts number, showing a sign of high bone turnover in both OVX and non-OVX F-exposed rats. Mechanistically, oophorectomy considerably activated the RANKL/RANK/OPG signaling pathway. Meanwhile, it was discovered that upregulated NF-κB positively facilitated the accumulation of nuclear factor of activated T-cells 1 (NFATC1), significantly promoting osteoclast differentiation. To sum up, this study greatly enriched the causes of clinical skeletal fluorosis and provided a new perspective for studying the pathogenesis of skeletal fluorosis.

Long-Term Fate and Efficacy of a Biomimetic (Sr)-Apatite-Coated Carbon Patch Used for Bone Reconstruction

Critical bone defect repair remains a major medical challenge. Developing biocompatible materials with bone-healing ability is a key field of research, and calcium-deficient apatites (CDA) are appealing bioactive candidates. We previously described a method to cover activated carbon cloths (ACC) with CDA or strontium-doped CDA coatings to generate bone patches. Our previous study in rats revealed that apposition of ACC or ACC/CDA patches on cortical bone defects accelerated bone repair in the short term. This study aimed to analyze in the medium term the reconstruction of cortical bone in the presence of ACC/CDA or ACC/10Sr-CDA patches corresponding to 6 at.% of strontium substitution. It also aimed to examine the behavior of these cloths in the medium and long term, in situ and at distance. Our results at day 26 confirm the particular efficacy of strontium-doped patches on bone reconstruction, leading to new thick bone with high bone quality as quantified by Raman microspectroscopy. At 6 months the biocompatibility and complete osteointegration of these carbon cloths and the absence of micrometric carbon debris, either out of the implantation site or within peripheral organs, was confirmed. These results demonstrate that these composite carbon patches are promising biomaterials to accelerate bone reconstruction.

The extracellular matrix of human bone marrow adipocytes and glucose concentration differentially alter mineralization quality without impairing osteoblastogenesis

Bone marrow adipocytes (BMAds) accrue in various states of osteoporosis and interfere with bone remodeling through the secretion of various factors. However, involvement of the extracellular matrix (ECM) produced by BMAds in the impairment of bone marrow mesenchymal stromal cell (BM-MSC) osteoblastogenesis has received little attention. In type 2 diabetes (T2D), skeletal fragility is associated with several changes in bone quality that are incompletely understood, and BMAd quantity increases in relationship to poor glycemic control. Considering their altered phenotype in this pathophysiological context, we aimed to determine the contribution of the ECM of mature BMAds to osteoblastogenesis and mineralization quality in the context of chronic hyperglycemia.

Human BM-MSCs were differentiated for 21 days in adipogenic medium containing either a normoglycemic (LG, 5.5 mM) or a high glucose concentration (HG, 25 mM). The ECM laid down by BMAds were devitalized through cell removal to examine their impact on the proliferation and differentiation of BM-MSCs toward osteoblastogenesis in LG and HG conditions. Compared to control plates, both adipocyte ECMs promoted cell adhesion and proliferation. As shown by the unmodified RUNX2 and osteocalcin mRNA levels, BM-MSC commitment in osteoblastogenesis was hampered by neither the hyperglycemic condition nor the adipocyte matrices. However, adipocyte ECMs or HG condition altered the mineralization phase with perturbed expression levels of type 1 collagen, MGP and osteopontin. Despite higher ALP activity, mineralization levels per cell were decreased for osteoblasts grown on adipocyte ECMs compared to controls. Raman spectrometry revealed that culturing on adipocyte matrices specifically prevents type-B carbonate substitution and favors collagen crosslinking, in contrast to exposure to HG concentration alone. Moreover, the mineral to organic ratio was disrupted according to the presence of adipocyte ECM and the glucose concentration used for adipocyte or osteoblast culture. HG concentration and adipocyte ECM lead to different defects in mineralization quality, recapitulating contradictory changes reported in T2D osteoporosis.

Our study shows that ECMs from BMAds do not impair osteoblastogenesis but alter both the quantity and quality of mineralization partly in a glucose concentration-dependent manner. This finding sheds light on the involvement of BMAds, which should be considered in the compromised bone quality of T2D and osteoporosis patients more generally.

•

Glucose level alters the Extracellular Matrix composition of Bone Marrow adipocytes.

•

Osteoblastogenesis on adipocyte ECMs is unaltered but produced less mineral amount.

•

The quality of the mineral is altered differently by adipocyte ECMs or glucose levels.

•

The presence of BM adipocytes should be valued in damaged osteoporosis bone quality.

Instrumented nanoindentation in musculoskeletal research

Musculoskeletal tissues, such as bone, cartilage, and muscle, are natural composite materials that are constructed with a hierarchical structure ranging from the cell to tissue level. The component differences and structural complexity, together, require comprehensive multiscale mechanical characterization. In this review, we focus on nanoindentation testing, which is used for nanometer to sub-micrometer length scale mechanical characterization. In the following context, we will summarize studies of nanoindentation in musculoskeletal research, examine the critical factors that affect nanoindentation testing results, and briefly summarize other commonly used techniques that can be conjoined with nanoindentation for synchronized imaging and colocalized characterization.

Material and nanomechanical properties of bone structural units of cortical and trabecular iliac bone tissues from untreated postmenopausal osteoporotic women

The differences in bone nanomechanical properties between cortical (Ct) and trabecular (Tb) bone remain uncertain, whereas knowing the respective contribution of each compartment is critical to understand the origin of bone strength. Our purpose was to compare bone mechanical and intrinsic properties of Ct and Tb compartments, at the bone structural unit (BSU) level, in iliac bone taken from a homogeneous untreated human population.

Among 60 PMMA-embedded transiliac bone biopsies from untreated postmenopausal osteoporotic women (64 ± 7 year-old), >2000 BSUs were analysed by nanoindentation in physiological wet conditions [indentation modulus (elasticity), hardness, dissipated energy], by Fourier transform infrared (FTIRM) and Raman microspectroscopy (mineral and organic characteristics), and by X-ray microradiography (degree of mineralization of bone, DMB). BSUs were categorized based on tissue age, osteonal (Ost) and interstitial (Int) tissues location and bone compartments (Ct and Tb).

Indentation modulus was higher in Ct than in Tb BSUs, both in Ost and Int. dissipated energy was higher in Ct than Tb, in Int BSUs. Hardness was not different between Ct and Tb BSUs. In Ost or Int BSUs, mineral maturity (conversion of non-apatitic into apatitic phosphates) was higher in Ct than in Tb, as well as for collagen maturity (Ost). Mineral content assessed as mineral/matrix (FTIRM and Raman) or as DMB, was lower in Ct than in Tb. Crystallinity (FTIRM) was similar in BSUs from Ct and Tb, and slightly lower in Ct than in Tb when measured by Raman, indicating that the crystal size/perfection was quite similar between Ct and Tb BSUs. The differences found between Ost and Int tissues were much higher than the difference found between Ct and Tb for all those bone material properties. Multiple regression analysis showed that Indentation modulus and dissipated energy were mainly explained by mineral maturity in Ct and by collagen maturity in Tb, and hardness by mineral content in both Ct and Tb.

In conclusion, in untreated human iliac bone, Ct and Tb BSUs exhibit different characteristics. Ct BSUs have higher indentation modulus, dissipated energy (Int), mineral and organic maturities than Tb BSUs, without difference in hardness. Although those differences are relatively small compared to those found between Ost and Int BSUs, they may influence bone strength at macroscale.

Treatment of postmenopausal osteoporosis patients with teriparatide for 24 months reverts forming bone quality indices to premenopausal healthy control values

Postmenopausal osteoporosis (PMOP) therapies are frequently evaluated by bone mineral density (BMD) gains against patients receiving placebo (calcium and vitamin D supplementation, a mild bone turnover-suppressing intervention), which is not equivalent to either healthy or treatment-naive PMOP. The aim of the present observational study was to assess the effects of TPTD treatment in PMOP (20 μg, once daily) at 6 (TPTD 6m; n = 28, age 65 ± 7.3 years), and 24 (TPTD 24m; n = 32, age 67.4 ± 6.15 years) months on bone quality indices at actively forming trabecular surfaces (with fluorescent double labels). Data from the TPTD-treated PMOP patients were compared with those in healthy adult premenopausal women (HC; n = 62, age 40.5 ± 10.6 years), and PMOP receiving placebo (PMOP-PLC; n = 94, age 70.6 ± 4.5 years). Iliac crest biopsies were analyzed by Raman microspectroscopy at three distinct tissue ages: mid-distance between the second label and the bone surface, mid-distance between the two labels, and 1 μm behind the first label. Mineral to matrix ratio (MM), mineral maturity/crystallinity (MMC), tissue water (TW), glycosaminoglycan (GAGs), and pyridinoline (Pyd) content were determined. Outcomes were compared by ANCOVA with subject age and tissue age as covariates, and health status as a fixed factor, followed by Sidak's post-hoc testing (significance assigned to p < 0.05). Both TPTD groups increased MM compared to PMOP-PLC. While TPTD 6m had values similar to HC, TPTD 24m had higher values compared to either HC or TPTD 6m. Both TPTD groups had lower MMC values compared to PMOP-PLC and similar to HC. TPTD 6m patients had higher TW content compared to HC, while TPTD 24m had values similar to HC and lower than either PMOP-PLC or TPTD 6m. Both TPTD groups had lower GAG content compared to HC group, while TPTD 6m had higher values compared to PMOP-PLC. Finally, TPTD 6m patients had higher Pyd content compared to HC and lower compared to PMOP-PLC, while TPTD 24m had lower values compared to PMOP-PLC and TPTD 6m, and similar to HC group. The results of the present study indicate that effects of TPTD on forming trabecular bone quality indices depend on treatment duration. At the recommended length of 24 m, TPTD restores bone mineral and organic matrix quality indices (MMC, TW, Pyd content) to premenopausal healthy (HC) levels.

Chronological Age Estimation of Male Occipital Bone Based on FTIR and Raman Microspectroscopy

Age-related changes in bone tissue have always been an important part of bone research, and age estimation is also of great significance in forensic work. In our study, FTIR and Raman microspectroscopy were combined to explore the structural and chronological age-related changes in the occipital bones of 40 male donors. The FTIR micro-ATR mode not only achieves the comparison of FTIR and Raman efficiency but also provides a new pattern for the joint detection of FTIR and Raman in hard tissue. Statistical analysis and PCA results revealed that the structure had little effect on the FTIR and Raman results. The FTIR and Raman mineral/matrix ratio, carbonate/phosphate ratio, crystallinity, and collagen maturity of the whole showed an increasing trend during maturation, and a significant correlation was found between FTIR and Raman by comparing four outcomes. Furthermore, the results indicated that the cutoff point of the change in the relative proportion of organic matrix and inorganic minerals in males was between 19 and 35 years old, and the changes in the relative proportion of organic matrix and inorganic minerals may play a key role in age estimation. Ultimately, we established age estimation regression models. The FTIR GA-PLS regression model has the best performance and is more suitable for our experiment (RMSECV = 10.405, RMSEP = 9.2654, R²CV = 0.814, and R²Pred = 0.828). Overall, FTIR and Raman combined with chemometrics are an ideal method to estimate chronological age based on age-dependent component changes in male occipital bones. Our experiment provides a proof of concept and potential experimental method for chronological age estimation.

Subchondral involvement in osteonecrosis of the femoral head: insight on local composition, microstructure and vascularization

OBJECTIVE

To determine changes of subchondral bone composition, micro-structure, bone marrow adiposity and micro-vascular perfusion in end-stage osteonecrosis of the femoral head (ONFH) compared to osteoarthritis (OA) using a combined in vivo and ex vivo approach.

DESIGN

Male patients up to 70 years old referred for total hip replacement surgery for end-stage ONFH were included (n = 14). Fifteen patients with OA were controls. Pre-operative MRI was used to assess bone perfusion (dynamic contrast-enhanced (DCE) sequences) and marrow fat content (chemical shift imaging). Three distinct zones of femoral head subchondral bone - necrotic, sclerotic, distant - were compared between groups. After surgery, plugs were sampled in these zones and Raman spectroscopy was applied to characterize bone mineral and organic components (old and newly-formed), and contrast-enhanced micro-computed tomography (CE-μCT) to determine bone micro-structural parameters and volume of bone marrow adipocytes, using conventional 2D histology as a reference.

RESULTS

In the necrotic zone of ONFH patients compared to OA patients: 1) the subchondral plate did not exhibit significant changes in composition nor structure; 2) the volume fraction of subchondral trabecular bone was significantly lower; 3) type-B carbonate substitution was less pronounced, 4) collagen maturity was more pronounced; and 5) bone marrow adipocytes were significantly depleted. The sclerotic zone from the ONFH group showed greater trabecular thickness, and higher DCE-MRI AUC and K_trans. Volume fraction of subchondral bone, trabecular number, and K_ep were significantly lower in the distant zone of the ONFH group.

CONCLUSIONS

This study demonstrated alterations of subchondral bone microstructure, composition, perfusion and/or adipose content in all zones of the femoral head.

Nanoscale Imaging and Analysis of Bone Pathologies

Understanding the properties of bone is of both fundamental and clinical relevance. The basis of bone’s quality and mechanical resilience lies in its nanoscale building blocks (i.e., mineral, collagen, non-collagenous proteins, and water) and their complex interactions across length scales. Although the structure–mechanical property relationship in healthy bone tissue is relatively well characterized, not much is known about the molecular-level origin of impaired mechanics and higher fracture risks in skeletal disorders such as osteoporosis or Paget’s disease. Alterations in the ultrastructure, chemistry, and nano-/micromechanics of bone tissue in such a diverse group of diseased states have only been briefly explored. Recent research is uncovering the effects of several non-collagenous bone matrix proteins, whose deficiencies or mutations are, to some extent, implicated in bone diseases, on bone matrix quality and mechanics. Herein, we review existing studies on ultrastructural imaging—with a focus on electron microscopy—and chemical, mechanical analysis of pathological bone tissues. The nanometric details offered by these reports, from studying knockout mice models to characterizing exact disease phenotypes, can provide key insights into various bone pathologies and facilitate the development of new treatments.

The effect of universal adhesives on dentine collagen

OBJECTIVES

The purpose of the study was to evaluate the integrity of dentine type I collagen after self-etching (SE) treatments with strong and mild universal adhesives.

METHODS

Coronal dentine specimens (n=10/product) were imaged by optical microscopy and analyzed by ATR-FTIR spectroscopy before and after treatment with 32% phosphoric acid gel (PA-negative control), 17% neutral EDTA (ED-positive control) conditioners and Adhese Universal (AD), Clearfil Universal Bond Quick (CQ), G-Premio Bond (GP), Prelude One (PR) and Scotchbond Universal (SB) adhesives. From the spectroscopic analysis the following parameters were determined: a) Extent of dentine demineralization (DM%) and b) percentage area of the Amide I curve-fitted components of β-turns, 3₁₀-helix/β-turns, α-helix, random coils, β-sheets and collagen maturation (R) index. Statistical analysis was performed by one-way ANOVA (DM%), paired t-test/Wilcoxon test (Amide I components) and Spearman correlation coefficient (DM% vs Amide I components) at an a=0.05 level.

RESULTS

PA, ED and GP removed the smear-layer and opened tubule orifices, whereas all other treatments removed only the intratubular smear-layer fraction. The ranking of the statistically significant differences in DM% was PA>GP>ED>AD, SB, CQ, PR, with AD being significantly different from PR. Regarding the Amide I components, PA demonstrated a significant reduction in β-turns, α-helices and an increase in β-sheets, GP a reduction in β-turns, AD an increase in β-turns and random coils, and CQ an increase in β-turns. PR, SB and ED showed insignificant differences in all the Amide I components. Significant correlations were found between DM%-random coils and DM%-R.

SIGNIFICANCE

The universal adhesives used in the SE mode induced none to minimal changes in dentine collagen structure, without evidence of the destabilization pattern observed after conventional phosphoric acid treatments.

Patterned, organoid-based cartilaginous implants exhibit zone specific functionality forming osteochondral-like tissues in vivo

Tissue engineered constructs have the potential to respond to the unmet medical need of treating deep osteochondral defects. However, current tissue engineering strategies struggle in the attempt to create patterned constructs with biologically distinct functionality. In this work, a developmentally-inspired modular approach is proposed, whereby distinct cartilaginous organoids are used as living building blocks. First, a hierarchical construct was created, composed of three layers of cartilaginous tissue intermediates derived from human periosteum-derived cells: (i) early (SOX9), (ii) mature (COL2) and (iii) (pre)hypertrophic (IHH, COLX) phenotype. Subcutaneous implantation in nude mice generated a hybrid tissue containing one mineralized and one non-mineralized part. However, the non-mineralized part was represented by a collagen type I positive fibrocartilage-like tissue. To engineer a more stable articular cartilage part, iPSC-derived cartilage microtissues (SOX9, COL2; IHH neg) were generated. Subcutaneous implantation of assembled iPSC-derived cartilage microtissues resulted in a homogenous cartilaginous tissue positive for collagen type II but negative for osteocalcin. Finally, iPSC-derived cartilage microtissues in combination with the pre-hypertrophic cartilage organoids (IHH, COLX) could form dual tissues consisting of i) a cartilaginous safranin O positive and ii) a bony osteocalcin positive region upon subcutaneous implantation, corresponding to the pre-engineered zonal pattern. The assembly of functional building blocks, as presented in this work, opens possibilities for the production of complex tissue engineered implants by embedding zone-specific functionality through the use of pre-programmed living building blocks.

Interplay between mineral crystallinity and mineral accumulation in health and postmenopausal osteoporosis

Osteoporosis is characterized by an imbalance between bone formation and resorption rates, resulting in bone loss. For ethical reasons, effects of antiosteoporosis drugs are compared against patients receiving vitamin D and calcium supplementation which is a mild antiresorptive regimen. Bone formation may be resolved into two phases: the initial formation of mineral crystals (primary nucleation) and the subsequent mineral accumulation (secondary nucleation and mineral growth) on them. In this study, we used Raman microspectroscopic analysis of iliac crest biopsies from healthy females (N = 108), postmenopausal osteoporosis patients receiving vitamin D and calcium supplementation (PMOP-S; N = 66), and treatment-naïve postmenopausal osteoporosis patients (PMOP-TN; N = 12) to test the hypothesis that at forming trabecular surfaces, mineral maturity / crystallinity of the youngest crystallites associates with the amount of subsequent mineral accumulation. The surfaces of analysis were chosen based on the presence of fluorescent double labels, defining three distinct tissue ages. The results indicated that when adjusted for age and tissue age, there were no differences in amount of mineral formed between healthy females and either PMOP-S or PMOP-TN, while both PMOP-S and PMOP-TN had larger crystallites compared to healthy females. Moreover, significant differences existed between PMOP-S and PMOP-TN in size of initial crystals formed as well as rate of mineral accumulation and maturation. These findings suggest an additional mechanism that may contribute to the decreased mineral content evident in PMOP, and provide a potential target for the development of new interventions. STATEMENT OF SIGNIFICANCE: We used Raman microspectroscopic analysis of iliac crest biopsies from healthy females and postmenopausal osteoporosis patients (PMOP) receiving placebo to test the hypothesis that at forming trabecular surfaces, mineral maturity / crystallinity (MMC) of the youngest crystallites associates with the amount of subsequent mineral accumulation. This can affect bone mechanical properties as larger crystallites have been shown to result in compromised mechanical attributes; and larger crystallites grow slower compared to smaller ones. The results of the present analysis indicate that increased MMC of the youngest formed mineral may contribute to the bone mineral loss evident in PMOP and the accompanying increased fracture risk independently of bone turnover rate.

Mineral and organic matrix composition at bone forming surfaces in postmenopausal women with osteoporosis treated with either teriparatide or zoledronic acid

The ability of bone to resist fracture is dependent on the composite nature of its mineral and organic matrix content. Teriparatide (TPTD) and zoledronic acid (ZOL) are approved anabolic and antiresorptive therapies, respectively, to reduce fracture risk in women with postmenopausal osteoporosis. In the SHOTZ study, postmenopausal women with osteoporosis were treated with TPTD (20 μg daily, subcutaneous) or ZOL (5 mg/year, intravenous infusion) for 24 months. Iliac crest biopsies were obtained at 6 months and again at 24 months from approximately one third of the original study cohort. To investigate the early effects of these two drugs on the quality of newly formed bone, we used vibrational spectroscopic techniques to analyze tetracycline-labelled transiliac biopsies obtained from participants at the 6-month time point. Raman spectra were acquired at forming trabecular and intra-cortical surfaces (identified by fluorescent double labels), to determine mineral, organic matrix, glycosaminoglycan, and tissue water content, as well as mineral maturity/crystallinity at three specific tissue ages (1-5, 15, and ≥25 days). Fourier transformed infrared microspectroscopy was used to determine pyridinoline/divalent collagen cross-link ratios. At 6 months, treatment with TPTD versus ZOL resulted in lower mineral and higher organic matrix content, increased tissue water content, and lower mineral/matrix, mineral maturity/crystallinity, glycosaminoglycan content, and pyridinoline/divalent enzymatic collagen cross-link ratio. Our results suggest that TPTD and ZOL have differential effects on material properties of newly formed bone at individual remodeling sites, highlighting their different mechanisms of action.

Mineralization of dental tissues and caries lesions detailed with Raman microspectroscopic imaging

Dental caries is the most common oral disease that causes demineralization of the enamel and later of the dentin. Depth-wise assessment of the demineralization process could be used to help in treatment planning. In this study, we aimed to provide baseline information for the development of a Raman probe by characterizing the mineral composition of the dental tissues from large composition maps (6 × 3 mm2 with 15 μm step size) using Raman microspectroscopy. Ten human wisdom teeth with different stages of dental caries lesions were examined. All of the teeth were cut in half at representative locations of the caries lesions and then imaged with a Raman imaging microscope. The pre-processed spectral maps were combined into a single data matrix, and the spectra of the enamel, dentin, and caries were identified by K-means cluster analysis. Our results showed that unsupervised identification of dental caries is possible with the K-means clustering. The compositional analysis revealed that the carious lesions are less mineralized than the healthy enamel, and when the lesions extend into the dentin, they are even less mineralized. Furthermore, there were more carbonate imperfections in the mineral crystal lattice of the caries tissues than in healthy tissues. Interestingly, we observed gradients in the sound enamel showing higher mineralization and greater mineral crystal perfection towards the tooth surface. To conclude, our results provide a baseline for the methodological development aimed at clinical diagnostics for the early detection of active caries lesions.

Combining polarized Raman spectroscopy and micropillar compression to study microscale structure-property relationships in mineralized tissues

Bone is a natural composite possessing outstanding mechanical properties combined with a lightweight design. The key feature contributing to this unusual combination of properties is the bone hierarchical organization ranging from the nano- to the macro-scale. Bone anisotropic mechanical properties from two orthogonal planes (along and perpendicular to the main bone axis) have already been widely studied. In this work, we demonstrate the dependence of the microscale compressive mechanical properties on the angle between loading direction and the mineralized collagen fibril orientation in the range between 0° and 82°. For this, we calibrated polarized Raman spectroscopy for quantitative collagen fibril orientation determination and validated the method using widely used techniques (small angle X-ray scattering, micro-computed tomography). We then performed compression tests on bovine cortical bone micropillars with known mineralized collagen fibril angles. A strong dependence of the compressive micromechanical properties of bone on the fibril orientation was found with a high degree of anisotropy for both the elastic modulus (E_a/E_t=3.80) and the yield stress (σ_a^y/σ_t^y=2.54). Moreover, the post-yield behavior was found to depend on the MCF orientation with a transition between softening to hardening behavior at approximately 50°. The combination of methods described in this work allows to reliably determine structure-property relationships of bone at the microscale, which may be used as a measure of bone quality.

Collagen maturity and mineralization in mesenchymal stem cells cultured on the hydroxyapatite-based bone scaffold analyzed by ATR-FTIR spectroscopic imaging

Modern bone tissue engineering is based on the use of implants in the form of biomaterials, which are used as scaffolds for osteoprogenitor or stem cells. The task of the scaffolds is to temporarily sustain the function, proliferation and differentiation of bone tissue to enable its regeneration. The aim of this work is to use the macro ATR-FTIR spectroscopic imaging for analysis of the ceramic-based biomaterial (chitosan/β-1,3-glucan/hydroxyapatite). Specifically, during long-term culture of mesenchymal cells derived from adipose tissue (ADSCs) and bone marrow (BMDSCs) on the surface of scaffold. Infrared spectroscopy allows the acquisition of information on both the organic and inorganic parts of the tested composite. This innovative spectroscopic approach proved to be very suitable for studying the formation of new bone tissue and ECM components, sample staining and demineralization are not required and consequently the approach is rapid and cost-effective. The novelty of this study focuses on the innovatory use of ATR-FTIR imaging to evaluate the molecular structure and maturity of collagen as well as mineral matrix formation and crystallization in the context of bone regenerative medicine. Our research has shown that the biomaterial investigated on this work facilitates the formation of valid bone ECM of the stem cells types studied, as a result of the synthesis of type I collagen and mineral content deposition. Nevertheless, ADSC cells have been proven to produce a greater amount of collagen with a lower content of helical secondary structures, at the same time showing a higher mineralization intensity compared to BMDSC cells. Considering the above results, it could be stated that the developed scaffold is a promising material for biomedical applications, including modification of bone implants to increase their biocompatibility.

Mechano-chemistry of human femoral diaphysis revealed by correlative Brillouin-Raman microspectroscopy

Brillouin–Raman microspectroscopy is presented as an innovative label-free all-optical investigation approachable to characterize the chemical composition and the mechanical properties of human tissues at micrometric resolution. Brillouin maps unveil mechanical heterogeneities in a human femoral diaphysis, showing a ubiquitous co-existence of hard and soft components, even in the most compact sections. The novel correlative analysis of Brillouin and Raman maps shows that the relative intensity of Brillouin peaks is a good proxy for the fraction of mineralized fibers and that the stiffness (longitudinal elastic modulus) of the hard component is linearly dependent on the hydroxyapatite concentration. For the soft component, a gradient of composition is found, ranging from an abundance of proteins in the more compact, external, bone to abundance of lipids, carotenoids, and heme groups approaching the trabecular, inner, part of the diaphysis. This work unveils the strong potential of correlative mechano-chemical characterization of human tissues at a micrometric resolution for both fundamental and translational research.

Raman and Fourier transform infrared imaging for characterization of bone material properties

As the application of Raman spectroscopy to study bone has grown over the past decade, making it a peer technology to FTIR spectroscopy, it has become critical to understand their complimentary roles. Recent technological advancements have allowed these techniques to collect grids of spectra in a spatially resolved fashion to generate compositional images. The advantage of imaging with these techniques is that it allows the heterogenous bone tissue composition to be resolved and quantified. In this review we compare, for non-experts in the field of vibrational spectroscopy, the instrumentation and underlying physical principles of FTIR imaging (FTIRI) and Raman imaging. Additionally, we discuss the strengths and limitations of FTIR and Raman spectroscopy, address sample preparation, and discuss outcomes to provide researchers insight into which techniques are best suited for a given research question. We then briefly discuss previous applications of FTIRI and Raman imaging to characterize bone tissue composition and relationships of compositional outcomes with mechanical performance. Finally, we discuss emerging technical developments in FTIRI and Raman imaging which provide new opportunities to identify changes in bone tissue composition with disease, age, and drug treatment.

Raman microspectroscopic analysis of the tissue-specific composition of the human osteochondral junction in osteoarthritis: A pilot study

This study investigates the influence of osteoarthritis (OA) disease severity on the bio-composition of the osteochondral junction at the human tibial plateau using Raman microspectroscopy. We specifically aim to analyze the spatial composition of mineralized osteochondral tissues, i.e., calcified cartilage (CC) and subchondral bone plate (SBP) from unfixed, hydrated specimens. We hypothesize that the mineralization of CC and SBP decreases in advanced OA. Twenty-eight cylindrical osteochondral samples (d = 4 mm) from tibial plateaus of seven cadaveric donors were harvested and sorted into three groups following histopathological grading: healthy (n = 5), early OA (n = 8), and advanced OA (n = 15). Raman spectra were subjected to multivariate cluster analyses to identify different tissues. Finally, the tissue-specific composition was analyzed, and the impact of OA was statistically evaluated with linear mixed models. Cluster analyses of Raman spectra successfully distinguished CC and SBP as well as a tidemark region and uncalcified cartilage. CC was found to be more mineralized and the mineral was more crystalline compared with SBP. Both tissues exhibited similar compositional changes as a function of histopathological OA severity. In early OA, the mineralization tends to increase, and the mineral contains fewer carbonate substitutions. Compared with early OA, mineral crystals are rich in carbonate while the overall mineralization decreases in advanced OA. This Raman spectroscopic study advances the methodology for investigating the complex osteochondral junction from native tissue. The developed methodology can be used to elucidate detailed tissue-specific changes in the chemical composition with advancing OA. STATEMENT OF SIGNIFICANCE: In this study, Raman microspectroscopy was utilized to investigate the influence of osteoarthritic degeneration on the tissue-specific biochemical composition of the human osteochondral junction. Multivariate cluster analyses allowed us to characterize subtle compositional changes in the calcified cartilage and subchondral bone plate as well as in the tidemark region. The compositional differences found between the calcified cartilage and subchondral bone plate in both organic and mineral phases will serve as critical benchmark parameters when designing biomaterials for osteochondral repair. We found tissue-specific changes in the mineralization and carbonate substitution as a function of histopathological OA severity. Our developed methodology can be used to investigate the metabolic changes in the osteochondral junction associated with osteoarthritis.

Impact microindentation assesses subperiosteal bone material properties in humans

Impact microindentation (IMI) is a Reference Point Indentation technique measuring tissue-level properties of cortical bone in humans in vivo. The nature, however, of the properties that can affect bone strength is incompletely understood. In the present study we examined bone material properties in transiliac bone biopsies obtained concurrently with measurements of Bone Material Strength index (BMSi) by IMI in 12 patients with different skeletal disorders and a wide range of BMD, with or without fractures (8 males, 4 females, mean age 48±12.2 (SD) years, range 15-60 years). IMI was performed in the mid-shaft of the right tibia with a hand-held microindenter (OsteoProbe). Cancellous and cortical bone mineralization density distributions (BMDD) were measured in the entire biopsy bone area by quantitative backscattered electron imaging. Raman measurements were obtained right at the outer edge of the cortex, and 5, 50, 100, 500μm inwards. The calculated parameters were: i) Mineral and organic matrix content as well as the mineral / matrix ratio. ii) Nanoporosity. iii) Glycosaminoglycan content. iv) Pyridinoline content. v) Maturity/crystallinity of the apatite crystallites. There was no relationship between BMSi values with any measurement of mineral content of whole bone tissue (BMD, BMDD) or maturity/crystallinity of bone mineral. On the other hand, a positive correlation between BMSi and local mineral content, and an inverse correlation between BMSi and nanoporosity at the mineralized subperiosteal edge of the sample and at 5μm inwards was found. A positive correlation was also observed between BMSi and pyridinoline content at the same locations. These results indicate that local mineral content, nanoporosity and pyridinoline content at the subperiosteal site in the transiliac bone biopsy are linked to the BMSi values measured in the tibia. As both high porosity at the nano level and low pyridinoline content of the bone matrix can negatively impact bone strength, our findings suggest that BMSi most likely assesses subperiosteal bone material properties.

Characterization of the Biological Fingerprint and Identification of Associated Parameters in Stress Fractures by FTIR Spectroscopy

Introduction

The stress fractures (SFs) are a common condition in athletes and military recruits, characterized by partial fracture caused by repetitive applications of stresses that are lower than the stress required to fracture the bone in a single loading. Fourier transform infrared (FTIR) spectroscopy gives information about the bone composition and also can determine the amount of a molecule. For this reason, the FTIR spectroscopy may be used as a tool for diagnosis of certain bone diseases related to the bone strength. In this research, we established the contributions of mineral and collagen properties to SF risk through FTIR spectroscopy, analyzing the biochemical profile differences between the healthy bone and the bone with an SF.

Materials and Methods

Previous written informed consent was obtained, and samples of the hip with an SF (n = 11) and healthy bone from the femur with traumatic fracture (n = 5) were obtained and analyzed employing FTIR spectroscopy and its biochemical mapping function. Then, using FTIR spectra and the map, the collagen content and ratios corresponding to matrix maturity, mineralization, carbonate substitution, acid phosphate substitution, and crystallinity were calculated. Moreover, a histopathological analysis through Masson's staining was conducted.

Results

The biochemical analysis showed that the bone with an SF presented a bone immaturity characterized by a higher content of collagen, lower matrix maturity, mineralization, carbonate and acid phosphate substitutions, and greater crystallinity compared to the healthy bone, being checked by the ratio analysis and biochemical mapping. Besides, Masson's stain showed a higher collagen content in the bone with an SF.

Conclusions

The bone with an SF presented alterations in its biochemical composition, showing bone immaturity, which broadens the panorama of the condition to investigate future treatments or prophylactic techniques.

Investigation of changes in bone density and chemical composition associated with bone marrow oedema-type appearances in magnetic resonance images of the equine forelimb

Background

The aetiology of bone marrow oedema-like abnormalities (BMOA) seen on magnetic resonance imaging (MRI) is as yet not fully understood. The current study aimed to investigate the potential of projection radiography and Raman microspectroscopy to provide information regarding the underlying physiological changes associated with BMOA in equine bone samples.

Methods

MRI was used to assess 65 limbs from 43 horses. A subset of 13 limbs provided 25 samples, 8 with BMOA present and 17 as controls; these were examined with projection radiography to assess bone mineral density and Raman spectroscopy to assess bone composition. Statistical analysis was conducted using SPSS, the relationship between BMOA and age was tested using binary logistic regression, other outcome measures via unpaired t-tests.

Results

Overall BMOA was found to be associated with locally increased bone density (p = 0.011), suggesting increased bone formation; however, no measurable changes relating to bone remodelling were found, and there were no detectable changes in the chemical composition of bone.

Conclusions

BMOA is associated with locally increased bone density, without an associated change in the chemical composition of bone, suggesting this is not linked to BMOA. The presence of increased bone density associated with BMOA does appear to suggest that an increased amount of bone formation is occurring in these regions, but as Raman microspectroscopy data do not demonstrate any significant changes in bone chemical composition associated with BMOA, it would appear that the increased bone volume is due to a greater amount of bone being formed rather than an imbalance in relation to bone remodelling.

The study provides a proof of principle for the use of Raman microspectroscopy and projection radiography in in vitro studies of BMOA.

Electronic supplementary material

The online version of this article (10.1186/s12891-019-2693-y) contains supplementary material, which is available to authorized users.

Bone matrix hypermineralization associated with low bone turnover in a case of Nasu-Hakola disease

Analysis of tissue from a 34-years-old male patient from Austrian origin with a history of multiple fractures associated with painful episodes over the carpal, tarsal and at the end of the long bones respectively is presented. Radiographic images and axial 3DCT scans showed widespread defects in trabecular bone architecture and ill-defined cortices over these skeletal sites in the form of discrete cystic-like lesions. Family history indicated two sisters (one half and one full biological sisters) also with a history of fractures. Whole exome sequencing revealed two heterozygous missense mutations in TYROBP (MIM 604142; NM_003332.3) gene encoding for a cell-surface adaptor protein, which is part of a signaling complex triggering activation of immune responses. It is expressed in cells of the ectoderm cell linage such as NK and dendritic cells, macrophages, monocytes, myeloid cells, microglia cells and osteoclasts. The phenotype and genotype of the patient were consistent with the diagnosis of Nasu-Hakola disease (NHD) (OMIM 221770). Investigations at the bone material level of a transiliac bone biopsy sample from the patient using polarized light microscopy and backscatter electron imaging revealed disordered lamellar collagen fibril arrangement and extensively increased matrix mineralization. These findings are the first bone material data in a patient with NHD and point toward an osteoclast defect involvement in this genetic condition.

Narrowband-autofluorescence imaging for bone analysis

We present a new autofluorescence-imaging method for bone analysis. This method, based on the autofluorescence of bone, provides color images in microscopic scale. The color images are created from three monochrome images acquired with optimal excitation- and emission-wavelengths combinations. The choice of these combinations were determined from the study of two-dimensional distributions of bone-features-bispectral autofluorescence in the visible- and ultraviolet-spectral range. We demonstrate that main-bone features visualized with MG-staining method can also be visualized in the autofluorescence-color image. Furthermore, the autofluorescence-color image presents features hardly distinguished in a histological-bone section.

Multiscale analyses reveal native-like lamellar bone repair and near perfect bone-contact with porous strontium-loaded bioactive glass

The efficient healing of critical-sized bone defects using synthetic biomaterial-based strategies is promising but remains challenging as it requires the development of biomaterials that combine a 3D porous architecture and a robust biological activity. Bioactive glasses (BGs) are attractive candidates as they stimulate a biological response that favors osteogenesis and vascularization, but amorphous 3D porous BGs are difficult to produce because conventional compositions crystallize during processing. Here, we rationally designed a porous, strontium-releasing, bioactive glass-based scaffold (pSrBG) whose composition was tailored to deliver strontium and whose properties were optimized to retain an amorphous phase, induce tissue infiltration and encourage bone formation. The hypothesis was that it would allow the repair of a critical-sized defect in an ovine model with newly-formed bone exhibiting physiological matrix composition and structural architecture. Histological and histomorphometric analyses combined with indentation testing showed pSrBG encouraged near perfect bone-to-material contact and the formation of well-organized lamellar bone. Analysis of bone quality by a combination of Raman spectral imaging, small-angle X-ray scattering, X-ray fluorescence and focused ion beam-scanning electron microscopy demonstrated that the repaired tissue was akin to that of normal, healthy bone, and incorporated small amounts of strontium in the newly formed bone mineral. These data show the potential of pSrBG to induce an efficient repair of critical-sized bone defects and establish the importance of thorough multi-scale characterization in assessing biomaterial outcomes in large animal models.

Estrogen depletion alters mineralization regulation mechanisms in an ovariectomized monkey animal model

Ovariectomized animal models have been extensively used in osteoporosis research due to the resulting loss of bone mass. The purpose of the present study was to test the hypothesis that estrogen depletion alters mineralization regulation mechanisms in an ovariectomized monkey animal model. To achieve this we used Raman microspectroscopy to analyze humeri from monkeys that were either SHAM-operated or ovariectomized (N = 10 for each group). Measurements were made as a function of tissue age and cortical surface (periosteal, osteonal, endosteal) based on the presence of calcein fluorescent double labels. In the present work we focused on osteoid seams (defined as a surface with evident calcein labels, 1 μm distance away from the mineralizing front, and for which the Raman spectra showed the presence of organic matrix but not mineral), as well as the youngest mineralized tissue between the second fluorescent label and the mineralizing front, 1 μm inwards from the front with the phosphate mineral peak evident in the Raman spectra (TA1). The spectroscopically determined parameters of interest were the relative glycosaminoglycan (GAG) and pyridinoline (Pyd) contents in the osteoid, and the mineral content in TA1. At all three cortical surfaces, significant correlations were evident in the SHAM-operated animals between osteoid GAG (negative) and Pyd content, and mineral content, unlike the OVX animals. These results suggest that in addition to the well-established effects on turnover rates and bone mass, estrogen depletion alters the regulation of mineralization by GAGs and Pyd.

Fourier Transform Infrared Imaging of Bone

Fourier transform infrared imaging (FTIRI) is a technique that can be used to analyze the material properties of bone using tissue sections. This chapter describes the basic principles of FTIR and the methods for capturing and analyzing FTIR images in bone sections.

Clinical infrared microscopic imaging: An overview

New developments in Mid-infrared microscopic imaging instrumentation and data analysis have turned this method into a conventional technique. This imaging method offers a global analysis of samples, with a resolution close to the cellular level enabling the acquisition of local molecular expression profiles. It is possible to get chemo-morphological information about the tissue status, which represents an essential benefit for future analytical interpretation of pathological changes of tissue. In this review, we give an overview of Mid-infrared microscopic imaging and its applications in clinical research.

Side-Effects of Convulsive Seizures and Anti-Seizure Therapy on Bone in a Rat Model of Epilepsy

The severe sole effects of seizures on the cortical part of bone were reported in our previous study. However, the side effects of anti-epileptic drug therapy on bones has not been differentiated from the effects of the convulsive seizures, yet. This study provides the first report on differentiation of the effects of seizures and carbamazepine (a widely used antiepileptic drug) therapy on bones; 50 mg/kg/day drug was given to genetically induced absence epileptic rats for five weeks. Distinct bone regions including cortical, trabecular, and growth plate in each of tibia, femur, and spine tissues were studied using Fourier transform infrared (FT-IR) imaging and Vickers microhardness test. Blood levels of vitamin D and bone turnover biomarkers were also measured. According to the FT-IR imaging results, both seizure and carbamazepine-treated groups, more dominantly the drug-treated group, had lower mineral content with altered collagen crosslinks and higher crystallinity, implying reduced bone strength. Lower microhardness values also supported lower mechanical strength in bones. The most affected bone tissue and region from seizures and treatment was found as the spine and cortical, respectively. While there was a reduction in vitamin D and calcium levels in both seizure and carbamazepin-treated groups, significantly elevated PTH and bone turnover biomarkers were only seen in the drug-treated group.

Effect of osteoporosis treatment agents on the cortical bone osteocyte microenvironment in adult estrogen-deficient, osteopenic rats

Though osteoporosis is a significant cause of disability worldwide, treatment with pharmacologic agents decreases risk of fragility fracture. Though these treatments act through the bone remodeling system to improve bone mass, it is unclear if they alter the response of bone to mechanical loading at the level of the osteocyte. This pre-clinical study determined the relationship between microstructural bone tissue properties and osteocyte lacunar size and density to strain around osteocytes with standard osteoporosis treatment or sequential therapies. Six-month-old female ovariectomized (OVX) Sprague-Dawley rats were cycled through various sequences of pharmacological treatments [alendronate (Aln), raloxifene (Ral) and human parathyroid hormone-1,34 (PTH)] for three month intervals, over nine months. Linear nanoindentation mapping was used to determine Young's modulus in perilacunar and bone matrix regions around cortical bone osteocyte lacunae. Measurements of lacunar diameter and density were completed. Treatment-related differences in Young's modulus in the perilacunar and bone matrix regions were not observed. We confirmed previous data that showed that the bone matrix region was stiffer than the perilacunar matrix region. Whole bone material properties were correlated to perilacunar matrix stiffness. Finite element models predicted a range of mechanical strain amplification factors estimated at the osteocyte across treatment groups. In summary, though the perilacunar matrix near cortical osteocyte lacuna is not as stiff as bone matrix further away, osteoporosis treatment agents do not affect the stiffness of bone tissue near osteocyte lacunae.

•

Monotherapy with osteoporosis treatment agents does not affect the stiffness of bone tissue around osteocyte lacunae.

•

Sequential use of osteoporosis treatment agents does not affect bone tissue stiffness around osteocyte lacunae.

•

Perilacunar cortical bone tissue is not as stiff as bone matrix further from osteocyte lacunae.

•

Whole bone material properties are negatively correlated to the stiffness of perilacunar bone tissue.

Raman spectroscopic imaging for quantification of depth-dependent and local heterogeneities in native and engineered cartilage

Articular cartilage possesses a remarkable, mechanically-robust extracellular matrix (ECM) that is organized and distributed throughout the tissue to resist physiologic strains and provide low friction during articulation. The ability to characterize the make-up and distribution of the cartilage ECM is critical to both understand the process by which articular cartilage undergoes disease-related degeneration and to develop novel tissue repair strategies to restore tissue functionality. However, the ability to quantitatively measure the spatial distribution of cartilage ECM constituents throughout the tissue has remained a major challenge. In this experimental investigation, we assessed the analytical ability of Raman micro-spectroscopic imaging to semi-quantitatively measure the distribution of the major ECM constituents in cartilage tissues. Raman spectroscopic images were acquired of two distinct cartilage tissue types that possess large spatial ECM gradients throughout their depth: native articular cartilage explants and large engineered cartilage tissue constructs. Spectral acquisitions were processed via multivariate curve resolution to decompose the "fingerprint" range spectra (800-1800 cm-1) to the component spectra of GAG, collagen, and water, giving rise to the depth dependent concentration profile of each constituent throughout the tissues. These Raman spectroscopic acquired-profiles exhibited strong agreement with profiles independently acquired via direct biochemical assaying of spatial tissue sections. Further, we harness this spectroscopic technique to evaluate local heterogeneities through the depth of cartilage. This work represents a powerful analytical validation of the accuracy of Raman spectroscopic imaging measurements of the spatial distribution of biochemical components in a biological tissue and shows that it can be used as a valuable tool for quantitatively measuring the distribution and organization of ECM constituents in native and engineered cartilage tissue specimens.

Bone quality changes associated with aging and disease: a review

Bone quality encompasses all the characteristics of bone that, in addition to density, contribute to its resistance to fracture. In this review, we consider changes in architecture, porosity, and composition, including collagen structure, mineral composition, and crystal size. These factors all are known to vary with tissue and animal ages, and health status. Bone morphology and presence of microcracks, which also contribute to bone quality, will not be discussed in this review. Correlations with mechanical performance for collagen cross-linking, crystallinity, and carbonate content are contrasted with mineral content. Age-dependent changes in humans and rodents are discussed in relation to rodent models of disease. Examples are osteoporosis, osteomalacia, osteogenesis imperfecta (OI), and osteopetrosis in both humans and animal models. Each of these conditions, along with aging, is associated with increased fracture risk for distinct reasons.

The Relationship of Collagen Structural and Compositional Heterogeneity to Tissue Mechanical Properties: A Chemical Perspective

Collagen is the primary protein component in mammalian connective tissues. Over the last 20 years, evidence has mounted that collagen matrices exhibit substantial heterogeneity in their hierarchical structures and that this heterogeneity plays important roles in both structure and function. Herein, an overview of studies addressing the nanoscale compositional and structural heterogeneity is provided and connected to work exploring the mechanical implications for a number of tissues.

Applying Full Spectrum Analysis to a Raman Spectroscopic Assessment of Fracture Toughness of Human Cortical Bone

A decline in the inherent quality of bone tissue is a † Equal contributors contributor to the age-related increase in fracture risk. Although this is well-known, the important biochemical factors of bone quality have yet to be identified using Raman spectroscopy (RS), a nondestructive, inelastic light-scattering technique. To identify potential RS predictors of fracture risk, we applied principal component analysis (PCA) to 558 Raman spectra (370-1720 cm^-1) of human cortical bone acquired from 62 female and male donors (nine spectra each) spanning adulthood (age range = 21-101 years). Spectra were analyzed prior to R-curve, nonlinear fracture mechanics that delineate crack initiation (K_init) from crack growth toughness (K_grow). The traditional ν₁phosphate peak per amide I peak (mineral-to-matrix ratio) weakly correlated with K_init (r = 0.341, p = 0.0067) and overall crack growth toughness (J-int: r = 0.331, p = 0.0086). Sub-peak ratios of the amide I band that are related to the secondary structure of type 1 collagen did not correlate with the fracture toughness properties. In the full spectrum analysis, one principal component (PC5) correlated with all of the mechanical properties (K_init: r = - 0.467, K_grow: r = - 0.375, and J-int: r = - 0.428; p < 0.0067). More importantly, when known predictors of fracture toughness, namely age and/or volumetric bone mineral density (vBMD), were included in general linear models as covariates, several PCs helped explain 45.0% (PC5) to 48.5% (PC7), 31.4% (PC6), and 25.8% (PC7) of the variance in K_init, K_grow, and J-int, respectively. Deriving spectral features from full spectrum analysis may improve the ability of RS, a clinically viable technology, to assess fracture risk.

Vibrational spectroscopic techniques to assess bone quality

Although musculoskeletal diseases such as osteoporosis are diagnosed and treatment outcome is evaluated based mainly on routine clinical outcomes of bone mineral density (BMD) by DXA and biochemical markers, it is recognized that these two indicators, as valuable as they have proven to be in the everyday clinical practice, do not fully account for manifested bone strength. Thus, the term bone quality was introduced, to complement considerations based on bone turnover rates and BMD. Bone quality is an "umbrella" term that incorporates the structural and material/compositional characteristics of bone tissue. Vibrational spectroscopic techniques such as Fourier transform infrared microspectroscopy (FTIRM) and imaging (FTIRI), and Raman spectroscopy, are suitable analytical tools for the determination of bone quality as they provide simultaneous, quantitative, and qualitative information on all main bone tissue components (mineral, organic matrix, tissue water), in a spatially resolved manner. Moreover, the results of such analyses may be readily combined with the outcomes of other techniques such as histology/histomorphometry, small angle X-ray scattering, quantitative backscattered electron imaging, and nanoindentation.

Hypodynamia Alters Bone Quality and Trabecular Microarchitecture

Disuse induces a rapid bone loss in humans and animals; hypodynamia/sedentarity is now recognized as a risk factor for osteoporosis. Hypodynamia also decreases bone mass but its effects are largely unknown and only few animal models have been described. Hypodynamic chicken is recognized as a suitable model of bone loss but the effects on the quality have not been fully explored. We have used ten chickens bred in a large enclosure (FREE group); ten others were confined in small cages with little space to move around (HYPO group). They were sacrificed at 53 days and femurs were evaluated by microcomputed tomography (microCT) and nanoindentation. Sections (4 µm thick) were analyzed by Fourier Transform InfraRed Microspectroscopy (FTIR) to see the effects on mineralization and collagen and quantitative backscattered electron imaging (qBEI) to image the mineral of the bone matrix. Trabecular bone volume and microarchitecture were significantly altered in the HYPO group. FTIR showed a significant reduction of the mineral-to-matrix ratio in the HYPO group associated with an increase in the carbonate content and an increase in crystallinity (calculated as the area ratio of subbands located at 1020 and 1030 cm^-1) indicating a poor quality of the mineral. Collagen maturity (calculated as the area ratio of subbands located at 1660 and 1690 cm^-1) was significantly reduced in the HYPO group. Reduced biomechanical properties were observed at the tissue level. Confined chicken represents a new model for the study of hypodynamia because bone changes are not created by a surgical lesion or a traumatic method. Animals have a reduced bone mass and present with an altered bone matrix quality which is less mineralized and whose collagen contains less crosslinks than in control chicken.

Effects of losartan treatment on the physicochemical properties of diabetic rat bone

Inhibitors of the renin-angiotensin system used to treat several diseases have also been shown to be effective on bone tissue, suggesting that angiotensin-converting enzyme inhibitors and angiotensin receptor blockers may reduce fracture risk. The present study investigated the effects of losartan on the physicochemical and biomechanical properties of diabetic rat bone. Losartan (5 mg/kg/day) was administered via oral gavage for 12 weeks. Bone mineral density (BMD) was measured using dual-energy X-ray absorptiometry. Whole femurs were tested under tension to evaluate the biomechanical properties of bone. The physicochemical properties of bone were analyzed by Fourier transform infrared spectroscopy. Although losartan did not recover decreases in the BMD of diabetic bone, it recovered the physicochemical (mineral and collagen matrix) properties of diabetic rat bone. Furthermore, losartan also recovered ultimate tensile strength of diabetic rat femurs. Losartan, an angiotensin II type 1 receptor blocker, has a therapeutic effect on the physicochemical properties of diabetic bone resulting in improvement of bone strength at the material level. Therefore, specific inhibition of this pathway at the receptor level shows potential as a therapeutic target for diabetic patients suffering from bone diseases such as osteopenia.

Vitamin D and calcium supplementation for three years in postmenopausal osteoporosis significantly alters bone mineral and organic matrix quality

Prospective, controlled clinical trials in postmenopausal osteoporosis typically compare effects of an active drug with placebo in addition to vitamin D and calcium supplementation in both treatment arms. While clinical benefits are documented, the effect of this supplementation in the placebo arm and in clinical practice on bone material composition properties is unknown. The purpose of the present study was to evaluate these bone quality indices (specifically mineral/matrix, nanoporosity, glycosaminoglycan content, mineral maturity/crystallinity, and pyridinoline content) in patients that either received long-term vitamin D (400-1200IU) and calcium (1.0-1.5g) supplementation, or did not. We have analyzed by Raman microspectroscopy the bone forming trabecular surfaces of iliac crest in pre-treatment samples of a teriparatide study and the endpoint biopsies of the control arm obtained from the HORIZON trial. In general, the mineral/matrix ratio and the glycosaminoglycan (GAG) content was higher while nanoporosity, (a surrogate for tissue water content), the mineral maturity/crystallinity (MMC) and the pyridinoline (Pyd) content was lower in patients without long-term supplementation. Moreover, all indices were significantly dependent on tissue age. In conclusion, vitamin D and calcium supplementation is associated with altered mineral and organic matrix properties.

Raman Spectroscopic Analyses of Jaw Periosteal Cell Mineralization

To achieve safer patient treatments, serum-free cell culture conditions have to be established for cell therapies. In previous studies, we demonstrated that serum-free culture favored the proliferation of MSCA-1⁺ osteoprogenitors derived from the jaw periosteum. In this study, the in vitro formation of bone-specific matrix by MSCA-1⁺ jaw periosteal cells (JPCs, 3 donors) was assessed and compared under serum-free and serum-containing media conditions using the marker-free Raman spectroscopy. Based on a standard fluorescence assay, JPCs from one patient were not able to mineralize under serum-containing culture conditions, whereas the other cells showed similar mineralization levels under both conditions. Raman spectra from mineralizing MSCA-1⁺ JPCs revealed higher levels of hydroxyapatite formation and higher mineral to matrix ratios under serum-free culture conditions. Higher carbonate to phosphate ratios and higher crystallinity in JPCs cultured under serum-containing conditions indicated immature bone formation. Due to reduced collagen production under serum-free conditions, we obtained significant differences in collagen maturity and proline to hydroxyproline ratios compared to serum-free conditions. We conclude that Raman spectroscopy is a useful tool for the assessment and noninvasive monitoring of in vitro mineralization of osteoprogenitor cells. Further studies should extend this knowledge and improve JPC mineralization by optimizing culture conditions.

Investigation of intervertebral disc degeneration using multivariate FTIR spectroscopic imaging

Traditionally tissue samples are analysed using protein or enzyme specific stains on serial sections to build up a picture of the distribution of components contained within them. In this study we investigated the potential of multivariate curve resolution-alternating least squares (MCR-ALS) to deconvolute 2nd derivative spectra of Fourier transform infrared (FTIR) microscopic images measured in transflectance mode of goat and human paraffin embedded intervertebral disc (IVD) tissue sections, to see if this methodology can provide analogous information to that provided by immunohistochemical stains and bioassays but from a single section. MCR-ALS analysis of non-degenerate and enzymatically in vivo degenerated goat IVDs reveals five matrix components displaying distribution maps matching histological stains for collagen, elastin and proteoglycan (PG), as well as immunohistochemical stains for collagen type I and II. Interestingly, two components exhibiting characteristic spectral and distribution profiles of proteoglycans were found, and relative component/tissue maps of these components (labelled PG1 and PG2) showed distinct distributions in non-degenerate versus mildly degenerate goat samples. MCR-ALS analysis of human IVD sections resulted in comparable spectral profiles to those observed in the goat samples, highlighting the inter species transferability of the presented methodology. Multivariate FTIR image analysis of a set of 43 goat IVD sections allowed the extraction of semi-quantitative information from component/tissue gradients taken across the IVD width of collagen type I, collagen type II, PG1 and PG2. Regional component/tissue parameters were calculated and significant correlations were found between histological grades of degeneration and PG parameters (PG1: p = 0.0003, PG2: p < 0.0001); glycosaminoglycan (GAG) content and PGs (PG1: p = 0.0055, PG2: p = 0.0001); and MRI T2* measurements and PGs (PG1: p = 0.0021, PG2: p < 0.0001). Additionally, component/tissue parameters for collagen type I and II showed significant correlations with total collagen content (p = 0.0204, p = 0.0127). In conclusion, the presented findings illustrate, that the described multivariate FTIR imaging approach affords the necessary chemical specificity to be considered an important tool in the study of IVD degeneration in goat and human IVDs.

Novel Raman Spectroscopic Biomarkers Indicate That Postyield Damage Denatures Bone's Collagen

Raman spectroscopy has become a powerful tool in the assessment of bone quality. However, the use of Raman spectroscopy to assess collagen quality in bone is less established than mineral quality. Because postyield mechanical properties of bone are mostly determined by collagen rather than the mineral phase, it is essential to identify new spectroscopic biomarkers that help infer the status of collagen quality. Amide I and amide III bands are uniquely useful for collagen conformational analysis. Thus, the first aim of this work was to identify the regions of amide bands that are sensitive to thermally induced denaturation. Collagen sheets and bone were thermally denatured to identify spectral measures that change significantly following denaturation. The second aim was to assess whether mechanical damage denatures the collagen phase of bone, as reflected by the molecular spectroscopic biomarkers identified in the first aim. The third aim was to assess the correlation between these new spectroscopic biomarkers and postyield mechanical properties of cortical bone. Our results revealed five peaks whose intensities were sensitive to thermal and mechanical denaturation: ∼1245, ∼1270, and ∼1320 cm(-1) in the amide III band, and ∼1640 and ∼1670 cm(-1) in the amide I band. Four peak intensity ratios derived from these peaks were found to be sensitive to denaturation: 1670/1640, 1320/1454, 1245/1270, and 1245/1454. Among these four spectral biomarkers, only 1670/1640 displayed significant correlation with all postyield mechanical properties. The overall results showed that these peak intensity ratios can be used as novel spectroscopic biomarkers to assess collagen quality and integrity. The changes in these ratios with denaturation may reflect alterations in the collagen secondary structure, specifically a transition from ordered to less-ordered structure. The overall results clearly demonstrate that this new spectral information, specifically the ratio of 1670/1640, can be used to understand the involvement of collagen quality in the fragility of bone. © 2015 American Society for Bone and Mineral Research.

Technologies for assessment of bone reflecting bone strength and bone mineral density in elderly women: an update

Reduced bone mineral density is a strong risk factor for fracture. The WHO's definition of osteoporosis is based on bone mineral density measurements assessed by dual x-ray absorptiometry. Several on other techniques than dual x-ray absorptiometry have been developed for quantitative assessment of bone, for example, quantitative ultrasound and digital x-ray radiogrammetry. Some of these techniques may also capture other bone properties than bone mass that contribute to bone strength, for example, bone porosity and microarchitecture. In this article we give an update on technologies which are available for evaluation primarily of bone mass and bone density, but also describe methods which currently are validated or are under development for quantitative assessment of other bone properties.

Aging Versus Postmenopausal Osteoporosis: Bone Composition and Maturation Kinetics at Actively-Forming Trabecular Surfaces of Female Subjects Aged 1 to 84 Years

Bone strength depends on the amount of bone, typically expressed as bone mineral density (BMD), determined by dual-energy X-ray absorptiometry (DXA), and on bone quality. Bone quality is a multifactorial entity including bone structural and material compositional properties. The purpose of the present study was to examine whether bone material composition properties at actively-forming trabecular bone surfaces in health are dependent on subject age, and to contrast them with postmenopausal osteoporosis patients. To achieve this, we analyzed by Raman microspectroscopy iliac crest biopsy samples from healthy subjects aged 1.5 to 45.7 years, paired biopsy samples from females before and immediately after menopause aged 46.7 to 53.6 years, and biopsy samples from placebo-treated postmenopausal osteoporotic patients aged 66 to 84 years. The monitored parameters were as follows: the mineral/matrix ratio; the mineral maturity/crystallinity (MMC); nanoporosity; the glycosaminoglycan (GAG) content; the lipid content; and the pyridinoline (Pyd) content. The results indicate that these bone quality parameters in healthy, actively-forming trabecular bone surfaces are dependent on subject age at constant tissue age, suggesting that with advancing age the kinetics of maturation (either accumulation, or posttranslational modifications, or both) change. For most parameters, the extrapolation of models fitted to the individual age dependence of bone in healthy individuals was in rough agreement with their values in postmenopausal osteoporotic patients, except for MMC, lipid, and Pyd content. Among these three, Pyd content showed the greatest deviation between healthy aging and disease, highlighting its potential to be used as a discriminating factor.

The Influence of Alcohol Consumption in Conjunction with Sex Hormone Deficiency on Ca/P Ratio in Rats

Deficiency of sex hormones and excessive alcohol consumption are factors that have been related to alterations in the pattern of bone mineralization and osteoporosis. The aim of this study was to evaluate possible alterations in the calcium/phosphorus (Ca/P) ratio in the femur of rats subjected to sex hormone deficiency and/or alcohol consumption. Methods. Female and male Wistar rats (n = 108) were divided into ovariectomized (Ovx), orchiectomized (Orx), or sham-operated groups and subdivided according to diet: alcoholic diet (20% alcohol solution), isocaloric diet, and ad libitum diet. The diets were administered for 8 weeks. The Ca/P ratio in the femur was analyzed by energy dispersive micro-X-ray spectrometer (μEDX). Results. Consumption of alcohol reduced the Ca/P ratio in both females and males. The isocaloric diet reduced the Ca/P ratio in females. In groups with the ad libitum diet, the deficiency of sex hormones did not change the Ca/P ratio in females or males. However, the combination of sex hormone deficiency and alcoholic diet presented the lowest values for the Ca/P ratio in both females and males. Conclusions. There was a reduced Ca/P ratio in the femur of rats that consumed alcohol, which was exacerbated when combined with a deficiency of sex hormones.

The micro-architecture of human cancellous bone from fracture neck of femur patients in relation to the structural integrity and fracture toughness of the tissue

Osteoporosis is clinically assessed from bone mineral density measurements using dual energy X-ray absorption (DXA). However, these measurements do not always provide an accurate fracture prediction, arguably because DXA does not grapple with ‘bone quality’, which is a combined result of microarchitecture, texture, bone tissue properties, past loading history, material chemistry and bone physiology in reaction to disease. Studies addressing bone quality are comparatively few if one considers the potential importance of this factor. They suffer due to low number of human osteoporotic specimens, use of animal proxies and/or the lack of differentiation between confounding parameters such as gender and state of diseased bone. The present study considers bone samples donated from patients (n = 37) who suffered a femoral neck fracture and in this very well defined cohort we have produced in previous work fracture toughness measurements (FT) which quantify its ability to resist crack growth which reflects directly the structural integrity of the cancellous bone tissue. We investigated correlations between BV/TV and other microarchitectural parameters; we examined effects that may suggest differences in bone remodelling between males and females and compared the relationships with the FT properties. The data crucially has shown that TbTh, TbSp, SMI and TbN may provide a proxy or surrogate for BV/TV. Correlations between FT critical stress intensity values and microarchitecture parameters (BV/TV, BS/TV, TbN, BS/BV and SMI) for osteoporotic cancellous tissue were observed and are for the first time reported in this study. Overall, this study has not only highlighted that the fracture model based upon BMD could potentially be improved with inclusion of other microarchitecture parameters, but has also given us clear clues as to which of them are more influential in this role.

•

first time ever study to relate microarchitecture to the fracture toughness of cancellous bone from the femoral head of FNF victims

•

reduction in bone mass relates to a reduction in the number of trabeculae and trabecular thickness and an increase in trabeculae spacing

•

bone loss observed appears to be a consequence of thinning of the trabeculae in males and perforation of the trabeculae in females

•

study hints that TbTh, TbSp, SMI and TbN may provide a proxy or surrogate for BV/TV

•

fracture models can be improved by including microarchitecture, BMD and the bone mineral quality of osteoporotic cancellous bone

Microscopy techniques for investigating the control of organic constituents on biomineralization

This article addresses recent advances in the application of microscopy techniques to characterize crystallization processes as they relate to biomineralization and bio-inspired materials synthesis. In particular, we focus on studies aimed at revealing the role organic macromolecules and functionalized surfaces play in modulating the mechanisms of nucleation and growth. In nucleation studies, we explore the use of methods such as in situ transmission electron microscopy, atomic force microscopy, and cryogenic electron microscopy to delineate formation pathways, phase stabilization, and the competing effects of free energy and kinetic barriers. In growth studies, emphasis is placed on understanding the interactions of macromolecular constituents with growing crystals and characterization of the internal structures of the resulting composite crystals using techniques such as electron tomography, atom probe tomography, and vibrational spectromicroscopy. Examples are drawn from both biological and bio-inspired synthetic systems.

Anisotropy in bone demineralization revealed by polarized far-IR spectroscopy

Bone material is composed of an organic matrix of collagen fibers and apatite nanoparticles. Previously, vibrational spectroscopy techniques such as infrared (IR) and Raman spectroscopy have proved to be particularly useful for characterizing the two constituent organic and inorganic phases of bone. In this work, we tested the potential use of high intensity synchrotron-based far-IR radiation (50–500 cm⁻¹) to gain new insights into structure and chemical composition of bovine fibrolamellar bone. The results from our study can be summarized in the following four points: (I) compared to far-IR spectra obtained from synthetic hydroxyapatite powder, those from fibrolamellar bone showed similar peak positions, but very different peak widths; (II) during stepwise demineralization of the bone samples, there was no significant change neither to far-IR peak width nor position, demonstrating that mineral dissolution occurred in a uniform manner; (III) application of external loading on fully demineralized bone had no significant effect on the obtained spectra, while dehydration of samples resulted in clear differences. (IV) using linear dichroism, we showed that the anisotropic structure of fibrolamellar bone is also reflected in anisotropic far-IR absorbance properties of both the organic and inorganic phases. Far-IR spectroscopy thus provides a novel way to functionally characterize bone structure and chemistry, and with further technological improvements, has the potential to become a useful clinical diagnostic tool to better assess quality of collagen-based tissues.