Influence of the Addition of Ovalbumin and Emulsifier on the Physical Properties and Stability of Yacon (Smallanthus sonchifolius) Juice Foams Prepared for Foam Mat Drying Process

Optimization of Mulberry Extract Foam-Mat Drying Process Parameters

Mulberry powder was created from the extract using a foam-mat drying process. The studies aimed to evaluate the effects of egg albumin, carboxymethyl cellulose (CMC), digestion-resistant maltodextrin (DRM) contents, and whipping time (5 to 15 min) on the foam properties. The impact of different drying temperatures (60 to 75 °C) on the quality of the finished mulberry powder was also noted. The best foam expansion/stability value was determined using multiple regression models as a function of egg albumin, CMC, DRM, and whipping time. The results indicated that the main influencing factors for the foam properties were whipping time followed by egg albumin, CMC, and DRM. Optimum values of foam expansion and stability were achieved at 467.9% and 97.02%, respectively. The foam had a porous structure and good stability for subsequent drying, with optimal contents of egg albumin, CMC, and DRM used at 7.6%, 0.4%, and 2%, respectively, along with a whipping time of 14.5 min. The established models had a high coefficient of determination (R2 > 0.9) and a high correlation between the predicted and observed values. Therefore, the model could be adjusted to determine the characteristics of the foam suitable for subsequent drying. The optimal values were then also verified. Minimal fluctuations (1.78−2.98%) between the experimental data and the optimal value were found. The drying temperature also significantly affected the quality of the mulberry powder. The foam was dried at 65 °C for 4 h to produce apowder with a beautiful light color (L* = 62.65), a characteristic purple-red color of mulberry (a* = 5.97). The moisture, water activity, and anthocyanin content of the finished mulberry powder were 4.57%, 0.3, and 5.4 mg/g, respectively.

Response Surface Approach to Optimize the Conditions of Foam Mat Drying of Plum in relation to the Physical-Chemical and Antioxidant Properties of Plum Powder

This research was done to optimize the influence of various egg albumin (EA) concentrations of 2, 4, and 6% as a foaming agent and whipping times of 5, 10, and 15 minutes, on physicochemical and antioxidant properties of plum powder produced using response surface methodology (RSM). Physical properties of the foam such as density, porosity, and expansion were determined. After drying and powder manufacturing, physical properties, namely, the water absorption index (WAI) and water solubility index (WSI), as well as chemical characteristics such as pH, titratable acidity, and browning index, were assessed. Finally, antioxidant capabilities such as the total phenol content (TPC), DPPH scavenging activity, beta carotene, and total flavonoid content (TFC) were measured. According to the findings, both whipping duration and EA concentration had a substantial effect on the foam forming characteristics. Foam expansion increased significantly with EA concentration and whipping time increase, but foam density exhibited an inverse relationship as expected. Increases in EA concentration and whipping duration both raised pH values whereas titratable acidity exhibited an inverse tendency as variable quantity rose. The browning index dropped as EA concentration increased. Antioxidant qualities were retained in dried sample powder as compared with the fresh sample, and they were also altered by variable changes. Overall, a 4% EA concentration for 10 to 15 minutes produced the best dehydration effects with the most antioxidant retention.