THA using an anatomic stem in patients with femoral head osteonecrosis

Japanese Orthopaedic Association 2019 Guidelines for osteonecrosis of the femoral head

PURPOSE

The Clinical Practice Guidelines for Osteonecrosis of the Femoral Head (ONFH) 2019 Edition, written by the working group for ONFH guidelines of the Japanese Investigation Committee (JIC) for ONFH under the auspices of the Japanese Ministry of Health, Labour, and Welfare and endorsed by the Japanese Orthopaedic Association, were published in Japanese in October 2019. The objective of this guideline is to provide a support tool for decision-making between doctors and patients.

METHODS

Procedures for developing this guideline were based on the Medical Information Network Distribution Service Handbook for Clinical Practice Guideline Development 2014, which proposed an appropriate method for preparing clinical guidelines in Japan.

RESULTS

This clinical practice guideline consists of 7 chapters: epidemiology; pathology; diagnosis; conservative therapy; surgical treatment: bone transplantation/cell therapy; surgical treatment: osteotomy; and surgical treatment: hip replacement. Twelve background questions and 13 clinical questions were determined to define the basic features of the disease and to be addressed when deciding treatment in daily practice, respectively.

CONCLUSIONS

The clinical practice guidelines for the ONFH 2019 edition will be useful for physicians, investigators, and medical staff in clinical practice, as well as for patients, during the decision-making process when defining how to treat ONFH.

Ultra-Short Anatomic Uncemented Femoral Stem and Ceramic-on-Ceramic Bearing in Patients With Idiopathic or Ethanol-Induced Femoral Head Osteonecrosis

BACKGROUND

Long-term result of the ultra-short anatomic cementless stem in the patients with idiopathic or ethanol-induced osteonecrosis of the femoral head has not been assessed. The aim of this study is to evaluate the long-term clinical, radiographic, computed tomography scan, and dual-energy X-ray absorptiometry scanning results, and survivorship of this specific femoral stem in patients with idiopathic or ethanol-induced femoral head osteonecrosis.

METHODS

Two hundred fifty-six patients (335 hips) with an average age of 49.8 years (range 20-63) were enrolled in the current study. All patients underwent dual-energy X-ray absorptiometry scanning of the acetabulum and proximal femur preoperatively and at final follow-up. Computed tomography scan was obtained in all patients at final follow-up. The mean follow-up was 14.7 years (range 13-16).

RESULTS

At final follow-up, the average Harris hip score, Western Ontario and McMaster Universities Osteoarthritis Index score, and University of California, Los Angeles activity score were 94 points, 12 points, and 8 points, respectively. Four stems (1%) underwent revision for aseptic loosening. One acetabular component (0.3%) was revised for recurrent dislocation. No hip was revised for squeaking or clicking sound. Survivorship of the femoral stem was 99.0% (95% confidence interval 94-100) and that of the acetabular component was 99.4% (95% confidence interval 95-100) at 14.7 years.

CONCLUSION

Ultra-short proximal loading anatomic uncemented femoral stems with ceramic-on-ceramic bearings have excellent survivorship free from aseptic loosening and good clinical results at long term.

LEVEL OF EVIDENCE

Level IV.

Hip arthroplasty for treatment of advanced osteonecrosis: comprehensive review of implant options, outcomes and complications

Surgical treatment for late stage (post-collapse) osteonecrosis of the femoral head is controversial. In these situations, the outcome of joint preservation procedures is poor. There are several arthroplasty options for late-stage disease. The clinical outcomes of hemiarthroplasty and hemiresurfacing are unpredictable because of progressive acetabular cartilage degeneration. Total hip resurfacing may be associated with further vascular insult to the femoral head and early failure of the implant. Total hip replacement with metal-on-conventional polyethylene bearing surfaces has been the gold standard, but implant survivorship is limited in young active patients due to wear and osteolysis. Newer alternative bearing surfaces may have improved wear characteristics, but their durability must be confirmed in longer-term studies.

An integrated CAD/CAM/robotic milling method for custom cementless femoral prostheses

Aseptic loosening is the primary cause of cementless femoral prosthesis failure and is related to the primary stability of the cementless femoral prosthesis in the femoral cavity. The primary stability affects both the osseointegration and the long-term stability of cementless femoral prostheses. A custom cementless femoral prosthesis can improve the fit and fill of the prosthesis in the femoral cavity and decrease the micromotion of the proximal prosthesis such that the primary stability of the custom prosthesis can be improved, and osseointegration of the proximal prosthesis is achieved. These results will help to achieve long-term stability in total hip arthroplasty (THA). In this paper, we introduce an integrated CAD/CAM/robotic method of milling custom cementless femoral prostheses. The 3D reconstruction model uses femoral CT images and 3D design software to design a CAD model of the custom prosthesis. After the transformation matrices between two units of the robotic system are calibrated, consistency between the CAM software and the robotic system can be achieved, and errors in the robotic milling can be limited. According to the CAD model of the custom prosthesis, the positions of the robotic tool points are produced by the CAM software of the CNC machine. The normal vector of the three adjacent robotic tool point positions determines the pose of the robotic tool point. In conclusion, the fit rate of custom pig femur stems in the femoral cavities was 90.84%. After custom femoral prostheses were inserted into the femoral cavities, the maximum gaps between the prostheses and the cavities measured less than 1 mm at the diaphysis and 1.3 mm at the metaphysis.

Cementless THA for the treatment of osteonecrosis at 10-year follow-up: have we improved compared to cemented THA?

Results of cementless THA for osteonecrosis were evaluated at a minimum of 10-year follow-up and compared to our previous report of cemented THA for osteonecrosis. Eighty cementless THAs in 66 patients with osteonecrosis were followed for a minimum of 10 years. Evaluation consisted of need for revision; radiographic evidence of loosening, wear and osteolysis; activity monitoring with an accelerometer; UCLA, Tegner, WOMAC, and Harris hip scores. Results were compared to 48 cemented THAs performed for osteonecrosis with comparable follow-up. At a minimum of 10 years, 10 hips required reoperation. Loosening and revision for loosening were significantly lower in the cementless group compared to the cemented historical control. Cementless fixation in THAs for osteonecrosis demonstrated durable results with bearing surface wear being the major long-term problem.

High 10-year survival rate with an anatomic cementless stem (SPS)

BACKGROUND

Proximal cementless fixation using anatomic stems reportedly increases femoral fit and avoids stress-shielding. However, thigh pain was reported with the early stem designs. Therefore, a new anatomic cementless stem design was based on an average three-dimensional metaphyseal femoral shape. However, it is unclear whether this stem reduces the incidence of thigh pain.

QUESTIONS/PURPOSES

We asked whether this stem design was associated with a low incidence of thigh pain and provided durable fixation and high function.

METHODS

One hundred seventy-one patients (176 THAs) who had the anatomic proximal hydroxyapatite-coated stem implanted were reviewed. Eleven (6%) patients were lost to followup and 34 (20%) died without revision surgery. We used the Harris hip score (HHS) to assess pain and function. We evaluated femoral stem fixation and stability with the score of Engh et al. and also calculated a 10-year survival analysis. We assessed 126 patients (131 hips) at a mean followup of 10 years (range, 8-11 years)

RESULTS

At last followup, two patients described slight thigh pain that did not limit their physical activities. All stems appeared radiographically stable and one stem was graded nonintegrated but stable. Five patients had revision surgery: one on the femoral side (for posttraumatic fracture) and four on the acetabular side. Considering stem revision for aseptic loosening as the end point, survivorship was 100% (range, 95.4%-99.9%) at 10 years.

CONCLUSION

This anatomic cementless design using only metaphyseal fixation with a wide mediolateral flare, a sagittal curvature, and torsion, allowed durable proximal stem stability and fixation.

Analysis of bone matrix composition and trabecular microarchitecture of the femoral metaphysis in patients with osteonecrosis of the femoral head

Osteonecrosis of the femoral head (ONFH) usually affects young individuals. In advanced stages of ONFH, total hip replacement is the golden standard. However, survivorship after total hip replacement has been reported to be poorer in patients with ONFH compared to patients with primary osteoarthritis (OA). In radiological and histological studies, an impaired bone quality was found not only for the femoral head, but also for the intertrochanteric and metaphyseal region. We hypothesize that alterations of bone quality in the femoral metaphysis might contribute to early stem loosening. The objective of this study was to assess the gene expression levels of factors regulating bone formation and remodeling of the intertrochanteric regions and the proximal femoral canal in patients with ONFH and those with primary OA. The cellular and macromolecular composition of the bone matrix was assessed by osteocalcin immunohistochemistry, and the three-dimensional organization of trabecular bone was characterized by microCT analysis. Gene expression of BMP-2 is twofold higher in the proximal femur in the region of the greater trochanter of patients with ONFH compared to those with OA. The number of osteoblasts in the greater trochanter of patients with ONFH (253/mm(2)) is increased compared to patients with OA (156/mm(2)). Trabecular properties in ONFH bone are altered for bone volume (OA: 32 mm(3), ONFH: 51 mm(3)) and structure model index (OA: 2.2, ONFH: 1.6) in the proximal femoral canal, but not in the trochanteric regions. These alterations in bone metabolism and architecture might contribute to the higher rates of stem loosening after total hip replacement in patients with ONFH, however, further experimental and clinical studies are needed to support our findings.

Second-generation extensively porous-coated THA stems at minimum 10-year followup

The relatively high prevalence of thigh pain and stress shielding associated with the AML porous-coated cementless femoral component led to the development of the Prodigy, a femoral component with more extensive porous-coating and a distal polished bullet tip with medial diaphyseal relief to potentially decrease the flexural rigidity. We prospectively evaluated a cohort of 100 consecutive cementless total hip arthroplasties performed using this device. The minimum followup was 10 years (mean, 11.4 years; range, 10-12 years). At 10-year followup, 69 of the 86 patients (82 hips) were living, 14 patients with 15 hips were deceased, and three patients with three hips were lost to followup. No hips required a stem revision. Two patients (two hips) complained of thigh pain. All hips were bone ingrown. Distal tip radiolucencies and osteolysis occurred in 13 hips (17%) and none, respectively. Twenty-one hips (28%) demonstrated moderate or severe stress shielding. Only further followup will determine if this could be a clinical problem or one with revision surgery. These results encourage the authors to continue using second-generation extensively coated stems in their primary total hip arthroplasty constructs.