Failure of the Durom Metasul acetabular component

Long-Term Outcomes of Birmingham Hip Resurfacing Arthroplasty: A Systematic Review of Independent Series with At Least 10 Years of Follow-up

Background

Hip resurfacing arthroplasty (HRA) provides an attractive alternative to total hip arthroplasty (THA) for the management of osteoarthritis in younger, more active patients; however, concerns persist over complications specific to HRA. The aims of this systematic review were to assess the documented long-term survival rates of the metal-on-metal BIRMINGHAM HIP Resurfacing System at a follow-up of at least 10 years and to analyze the functional outcomes and cause of failures.

Methods

A systematic review was undertaken of all published cohort studies available in the MEDLINE, Cochrane, Embase, and PubMed research databases up to December 2021, as recommended by the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Data extraction was focused on survival rates, causes of failure, and functional outcomes. Survival estimates at 10 years were pooled in a meta-analysis, with each series weighted by its variance. Causes of failure were presented as a percentage of the pooled revisions.

Results

A total of 11 studies were identified, encompassing 3,129 cases. Across the 9 studies that had reported a mean follow-up, the mean follow-up was 11.7 years (range, 9.55 to 13.7 years). We found a pooled 10-year survival rate of 95.5% (95% confidence interval, 93.4% to 97.1%). There were 149 revisions among the studies (range, 4 to 38 revisions per study), a rate of 4.8% of the total procedures performed. The 2 main causes of revision were aseptic loosening (20.1% of revisions) and adverse reactions to metal debris (20.1%). There were no revisions for dislocation. Of the studies that reported preoperative functional scores, all reported significant improvement in mean scores postoperatively except for 1 study in which the mean Tegner activity score did not significantly improve.

Conclusions

When performed for appropriate indications, patients undergoing an HRA with use of the BIRMINGHAM HIP Resurfacing System can expect good implant survivorship at 10 years with acceptable functional results and low rates of dislocation and infection. This systematic review, however, confirms concerns regarding adverse reactions to metal debris as a leading cause of revision.

Level of Evidence

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Metal-on-Metal Hips: Ten-Year Clinical and Radiographic Outcomes of the ADEPT Metal-on-Metal Hip Resurfacing and Modular Total Hip Arthroplasty

BACKGROUND

The aim of this study is to update the 10-year follow-up survivorship and metal ions levels of a cohort of metal-on-metal (MoM) hip resurfacing (HR) and large-diameter-head (LDH) total hip arthroplasty (THA).

METHODS

The study is a retrospective analysis of prospectively collected data that compared the outcomes of 24 MoM HR (21 patients) and 15 (11 patients) modular LHD MoM THA at >10 years follow-up. Baseline characteristics as well as intraoperative and postoperative information were collected, including complications, revisions, clinical and radiographic outcomes, and serum metal ions level (Cobalt, Chromium). Metal ion levels were compared using a two-tailed unpaired t-test and Wilcoxon signed-rank test (jamovi v2.3.3.0, Sydney, NSW, AU).

RESULTS

No significant differences were detected in gender, BMI, and ASA score between the two groups. Patients in the modular THA group were significantly older (57 years vs. 46 years; p < 0.05). The HR overall survivorship was 91.7% (22 of 24 hips) with survivorship from implant failure and/or aseptic loosening and/or metal debris related 100% of problems. The modular THA overall survivorship was 86.7% (13 of 15 hips) with survivorship from implant aseptic loosening and metal ions complications of 93.4% (14 of 15 hips). No significant difference was noted when comparing clinical outcomes. Metal ions were significantly lower in the HR group (Co 25.8 nmol/L vs. 89 nmol/L; p < 0.001-Cr 33.5 nmol/L vs. 55.2 nmol/L; p = 0.026).

CONCLUSION

Both implants reported excellent and comparable clinical outcomes at >10 years follow-up. The Adept HR reported remarkable survivorship, in line with the registry data, proving once again its reliability in young active males. The modular LDH THA, despite being discontinued, presented higher reliability and a lower failure rate when compared with similar withdrawn MoM implants. Trunnionosis did not appear to be a significant problem in this particular modular design.

Repeated metal ion measurements and long-term outcome of Durom/MMC total hip arthroplasty

Background and purpose - Data regarding long-term behavior of metal ion levels in metal-on-metal total hip arthroplasty (MoM THA) patients is scarce. Therefore, we assessed whether there is any change in whole blood (WB) chromium (Cr), and cobalt (Co) ion measurements in Durom and MMC MoM THA patients over time. The secondary aim was to report the clinical outcomes using these devices in a single district. Patients and methods - Durom and MMC cups were used in 249 MoM THAs from 2005 to 2011 in our district. Median follow-up time was 12 years for Durom THA (interquartile range [IQR] = 3) and 9 years for MMC THA (IQR = 1). A random coefficient model was used to compare individual differences in repeated WB Cr and Co ion measurements. The Kaplan-Meier estimator was used to analyze implant survival with any reason for revision as the endpoint. Results - Geometric means of Cr in Durom THA and MMC THA patients decreased from 2.2 ppb (geometric standard deviation [SD] = 1.9) to 1.5 ppb (geometric SD = 2.5, p< 0.001) and from 1.8 ppb (geometric SD = 1.8) to 1.1 ppb (geometric SD = 2.8, p = 0.01) respectively. The geometric means of Co values remained unchanged. The 10-year survival of Durom THA was 82%, and that of MMC THA 89% for any revision reason as endpoint. Interpretation - WB Cr levels decreased over time, and Co levels remained unchanged at long-term follow-up. Despite this we recommend continuing the follow-up of these devices due to relatively low implant survival.

Comparison of the long-term cause of failure and survivorship of four hundred and twenty seven metal-on-metal hip arthroplasties: resurfacing versus large head total hip arthroplasty

Introduction

Comparison of mid- to long-term cause of failure and survivorship of metal-on-metal (MoM) resurfacing hip arthroplasty (RHA) and large head total hip arthroplasty (THA) remains sparse. This study aimed to identify and compare the cause of failure and survivorship of MoM RHA and THA at a minimum ten year follow-up.

Methods

Four hundred twenty-seven MoM hip arthroplasties (286 THA and 141 RHA) were retrospectively analyzed at a mean follow-up of 13 ± three years. Causes of failure were reported as MoM specific (i.e., adverse reaction to metal debris (ARMD) and painful hip with ion elevation) or MoM non-specific (i.e., fracture, infection, and dislocation). Chromium (Cr) and cobalt (Co) ion levels and Co/Cr ratio were compared. Survivorship was compared according to the cause of failure with revision as the endpoint.

Results

The rate of ARMD was significantly higher in THA (OR = 2.9 [95%-CI: 1–7]; p = 0.02). No significant difference was detected in failure rate due to other causes between the two groups (p = 0.2–0.9). Ion levels and Co/Cr ratio were both significantly higher in THA (p < 0.01). Survivorship was significantly lower in THA compared to RHA at ten years [89% (95%-CI: 85%–91%) vs 96% (95%-CI: 91%–98%); p = 0.01] and 15 years [73% (95%-CI: 67%–78%) vs 83% (95%-CI: 73%–90%); p = 0.01].

Conclusion

RHA survivorship was significantly higher at any time point. Failure rate due to ARMD was significantly higher in THA while no significant difference in other causes of failure was observed between the two groups. This result emphasizes the role of fretting corrosion at the head-neck junction (i.e., trunnionosis) with significantly higher ion levels and Co/Cr ratio dissociation in THA.

Long-term comparative study of large-diameter metal-on-metal bearings: Resurfacing versus total arthroplasty with large-diameter Durom™ bearing

INTRODUCTION

Short-term results in total hip arthroplasty (THA) with large-diameter metal-on-metal (MoM) bearings were encouraging, but high failure rates have been reported in the long term, notably implicating corrosion due to modularity. Several studies compared resurfacing (to which modularity does not apply) versus large-diameter MoM THA; but, to our knowledge, none compared the same bearing in the two situations with more than 10 years' follow-up. We therefore conducted a retrospective case-control study, using a single cup model (Durom™, Zimmer, Warsaw, USA) for both resurfacing (R) and large-diameter THA, to determine the role of modularity in failure of large-diameter MoM bearings. The study compared (1) metallic ion levels, and (2) survival, functional scores and complications rates between R and THA.

HYPOTHESIS

Large-diameter MoM bearing failure implicates not bearing wear but head-neck junction modularity in larger-diameter MoM THA.

MATERIAL AND METHOD

Eighty-three THAs and 90 Rs were included between February 2004 and March 2006. All patients had clinical and radiologic follow-up with chromium (Cr) and cobalt (Co) ion blood assay.

RESULTS

In the THA group, 24 of the 83 patients (28.9%) underwent revision for adverse reaction to metal debris (ARMD), versus none in the R group. Ten-year all-cause survival was significantly better in R (97.7%; 95% CI, 96.2-99.2) than THA (67.1%; 95% CI, 60.9-73.3). Median blood ion level was higher in THA (with a difference between Co and Cr: 5.75μg/L (range, 3.82-19.2) versus 1.75μg/L (range, 1.34-2.94) respectively) than in R (no difference: 0.89μg/L (range, 0.67-2.89) and 1.07μg/L (range, 0.67-1.65) respectively). In the THA group, there were positive correlations between Co and Cr elevation and implant revision (both p<0.0001). Co/Cr ratio was significantly higher in THA (2.57) than R (0.88) (p<0.0001), and higher again in the 24 cases of THA revision (4.67). There was no significant difference in mean PMA score (THA: 17.08±1.82 (range, 7-18); R: 17.50±0.74 (range, 15-18)), whereas mean Oxford score was better in R (14.32±2.5 (range, 12-24)) than THA (18.17±8.05 (range, 12-42)) (p=0.02).

DISCUSSION

The present study confirmed the incontrovertible implication of modularity in failure of large-diameter MoM THA, by analyzing the same bearing in THA and in resurfacing. Trunnionosis was observed in the 24 cases of revision, with the THA adaptation ring inducing serious metallic ion release (with dissociated Co/Cr ratio), accounting for the high rate of revision.

LEVEL OF EVIDENCE

III, case-control study.

[Mid-term effectiveness of large-head metal-on-metal total hip arthroplasty]

Objective

To explore the mid-term effectiveness of large-head metal-on-metal total hip arthroplasty (THA).

Methods

A retrospective analysis was made on the clinical date of 40 patients (43 hips) who were treated with the large-head metal-on-metal THA between April 2009 and June 2010. There were 18 males (20 hips) and 22 females (23 hips) with an average age of 55.1 years (range, 20-85 years). Unilateral hip was involved in 37 cases and bilateral hips in 3 cases. The disease causes included osteonecrosis of the femoral head in 14 cases (15 hips), osteoarthritis in 6 cases (7 hips), rheumatoid arthritis in 4 cases (4 hips), femoral neck fracture in 4 cases (4 hips), and developmental dysplasia of the hip in 12 cases (13 hips). Before operation, the Harris score and University of California Los Angeles (UCLA) score were 38.51±5.62 and 4.21±1.43, respectively. The visual analogue scale (VAS) score was 6.78±0.95.

Results

All patients were followed up 6.7-8.3 years (mean 7.5 years). All incisions healed primarily and no neurovascular injury, infection, and hip dislocation occurred. At last follow-up, the Harris score and UCLA score were 93.33±3.21 and 7.32±1.45, respectively, showing significant differences when compared with preoperative scores ( t=51.753, P=0.000; t=23.232, P=0.000). The thigh pain occurred in 3 cases (3 hips) in whom the inflammatory pseudotumor of soft tissues was found in 1 case (1 hip). Postoperative X-ray films showed that the acetabular abduction angle and anteversion angle were (46.5±3.2)° and (14.8±3.6) °, respectively. The initial stability of femoral stem prosthesis was excellent in 39 hips and good in 4 hips according to Mulliken standard. Osteolysis occurred in 2 hips and revision was performed in 1 hip of secondary loosening of prosthesis. The rest patients had no prosthesis loosening or sinking.

Conclusion

The mid-term effectiveness of large-head mental-on-mental THA in treatment of the terminal diseases of hips are good.

Surgical Approach May Influence Survival of Large-Diameter Head Metal-on-Metal Total Hip Arthroplasty: A 6- to 10-Year Follow-Up Study

Large-diameter head (LDH) metal-on-metal (MoM) total hip arthroplasty (THA) has lost popularity because of metal allergy or ALTRs (adverse local tissue reactions) in the past decade. Whether the surgical approach may influence the survival of LDH-MoM-THA has not been reported. From 2006 to 2009, we performed 96 LDH-MoM-THAs on 80 patients using an in situ head-neck assembly technique through a modified Watson-Jones approach. With a mean follow-up of 8.4 years (range, 6.3–10.1 years), the implant survival rate was 100%. All patients were satisfied with the results and the Harris Hip Score improved from 52 points to 98 points. No ALTRs were found, but 17.7% of the 96 hips (17 adverse events) experienced adverse events related to the cup, including 5 cases of outlier cup malposition, 11 cases of inadequate cup seating, and 1 acetabular fracture. The tissue tension that was improved by a muscle-sparing approach might lessen the chance of microseparation or edge-loading that is taken as the major risk for early implant failure. Further investigation of whether these LDH-MoM-THAs would fail or not would require a longer follow-up or even retrieval analysis in the future.

Mechanical Stability of the Taper Connection of Large Metal Femoral Heads With Adapter Sleeves in Total Hip Arthroplasty Analyzed Using Explicit Finite Element Simulations

BACKGROUND

Large diameter heads (LDHs) of metal-on-metal bearings in total hip arthroplasty provide increased range of motion and reduced dislocation rates. However, major concerns grew over high wear rates from the modular connection between femoral stem and head, especially in combination with adapter sleeves.

METHODS

A computational study on the taper connection stability of LDH (50 mm) with adapter sleeves of different lengths (S, M, L, and XL) compared with a standard femoral head (32 mm) without adapter sleeves was conducted using explicit finite element analyses. Four different impact configurations were considered resulting from varied mallet mass (0.5 vs 1.0 kg) and velocity (1.0 vs 2.0 m/s). The taper stability was evaluated by determination of the pull-off forces and micromotions due to simulated joint loads during walking (2 kN and 7.9 Nm, respectively). Moreover, the deformations of the adapter sleeves and the contact area in the taper connections were evaluated.

RESULTS

Although the pull-off forces of the LDH with different-sized adapter sleeves were comparable, contact area decreased and adapter sleeve deformations increased (up to 283%) with an increasing adapter sleeve length. Moreover, the micromotions of LDH with adapter sleeves were up to 7-times higher, as compared with the standard femoral head without an adapter sleeve.

CONCLUSION

The present numerical study confirms that the assembly technique of LDH with adapter sleeves reveals increased micromotions compared with standard femoral head sizes. We could demonstrate that deviations of the stem trunnion geometry and improper surgical instructions led to worse mechanical stability of the taper connection.

The Outcomes Following Revision of Monoblock Metal on Metal Acetabular Components for Painful Micromotion in the Absence of Adverse Local Tissue Reaction to Metal

BACKGROUND

Revision hip arthroplasty for metal-on-metal arthroplasty (MOMA) in the presence of an adverse local tissue reaction (ALTR) has been associated with compromised outcomes. We hypothesized that revision of MOMA for painful micromotion of the cup, in the absence of ALTR, would have a more favorable outcome.

METHODS

We reviewed our database for Durom acetabular shell revision with minimum 24 months (24 months to 8 years) follow-up. Patients with a diagnosis of painful micromotion in the absence of pseudotumor was identified.

RESULTS

At mid-term follow-up, 71 patients had undergone revision of a Durom MOMA. Twenty-seven of these (38%) were for painful micromotion (9 total hip arthroplasty, 18 hip resurfacing) of the cup alone. Following revision surgery, all patients reported resolution of the preoperative pain, as well as satisfactory outcome measures (mean scores: The Western Ontario and McMaster Universities Arthritis Index [WOMAC] 84.6, oxford hip score 84.7, Short Form Health Survey (SF-16) 51, University of California, Los Angeles (UCLA) 7.3). Radiologically, all cases demonstrated osseointegration of the revision shells; 1 case had zone-3 radiolucency that was nonprogressive. One patient had a dislocation treated by closed reduction at 10 weeks.

CONCLUSION

Revision MOMA for painful micromotion of the shell in the absence of ALTR is not similar to revision for ALTR and is associated with predictable improvement in pain and quality of life.

Short to Midterm Follow-Up of the Tritanium Primary Acetabular Component: A Cause for Concern

BACKGROUND

Several acetabular components utilizing novel ultraporous metal substrates have been introduced over the past decade. Collectively by design, they have a lower modulus of elasticity to reduce stress shielding, a higher coefficient of friction to enhance interference fit, and ultraporous surfaces to enhance osseointegration. However, little literature exists regarding their clinical performance.

METHODS

This study compared the clinical and radiographic results of 109 hips in 95 patients using a Tritanium primary cup (Stryker, Mahwah, NJ) to an age, body mass index, and gender-matched cohort of 100 patients that received a contemporary cup (Stryker Trident PSL HA).

RESULTS

At an average 4.24 + 1.49 years, implant survivorship of the Tritanium primary cup was 98.2%, with 2 cups revised for failure of osseointegration. One-year radiographs revealed radiolucent and radiosclerotic lines in 2 or more DeLee zones in 30.3% of cups and 3 zone involvement in 8.2%. These proportions increased (40.0% and 17.1%, respectively) at minimum 5-year follow-up. A comparison of 1 year and last follow-up radiographs revealed progression in 13.8%. Tritanium primary components with radiolucency in 2 or more zones exhibited significantly lower HHS at 2 years compared to all Trident peripheral self-locking (PSL) components (P < .0001) and Tritanium primary components with 1 zone or no radiolucency (P = .026). Scanning electron microscopy of a retrieved cup revealed local inflammatory reaction and no evidence of osseointegration.

CONCLUSION

Despite adequate implant survivorship, over one third of Tritanium primary cups had 2 or more zone radiolucency at minimum 5-year follow-up with associated lower Harris hip scores.

Metal on Metal or Ceramic on Ceramic for Cementless Total Hip Arthroplasty: A Meta-Analysis

BACKGROUND

Hard bearings, metal on metal (MOM) and ceramic on ceramic (COC), have been developed to overcome polyethylene wear-related osteolysis, but comparisons between these 2 hard bearings are limited. We performed a meta-analysis to determine revision rates for (1) any reason, (2) aseptic loosening, (3) periprosthetic joint infection (PJI), and (4) recurrent dislocation between MOM and COC bearings in cementless total hip arthroplasty.

METHODS

This analysis included 3 studies comparing COC and MOM bearings and 56 studies reporting outcomes of MOM or COC bearings. We conducted a comparison meta-analysis (with a fixed-effects model) on the 3 comparative studies and a proportional meta-analysis on the data from the 59 articles to determine a consensus.

RESULTS

In the comparison meta-analysis, MOM showed higher revision rate than COC for any reason (odds ratio = 2.39, P = .046) and PJI (odds ratio = 6.21, P = .015). In the proportion meta-analysis, the MOM group showed significantly higher revision rate than COC group for any reason, aseptic loosening, and PJI.

CONCLUSION

MOM bearings were associated with a higher risk of revision for any reason and PJI than COC bearings after cementless total hip arthroplasty.

Highly cross-linked polyethylene improves wear and mid-term failure rates for young total hip arthroplasty patients

We compared clinical outcomes and polyethylene wear for 2 young primary THA patient cohorts (<50 years of age) at mid-term follow-up. In total, 72 patients (84 hips) received a coventional polyethylene liner (CPE) and 84 patients (89 hips) received a highly cross-linked polyethylene liner (HXLPE). Mean Harris Hip Score improved to 81 points for both groups. UCLA activity scores were higher for HXLPE patients (6.0 vs 5.3, p = 0.03), with lower mean linear wear (0.02 vs 0.13 mm/year, p<0.001) and lower mean volumetric wear (75.1 vs 229.8 mm3, p<0.001) at an average of 70 months follow-up. No HXLPE patient required revision for wear related concerns, compared to 5 CPE patients with revision for aseptic loosening or impending radiographic failure (0% vs 5.9%, p = 0.02). HXLPE is associated with reduced wear among young, active THA patients without increased risk of early mechanical failure.

Aseptic loosening of cobalt chromium monoblock sockets after hip resurfacing

INTRODUCTION

Acetabular component loosening is a leading cause for revision after metal-on-metal hip resurfacing arthroplasty (MMHRA). We aimed to identify potential risk factors and determine radiographic signs associated with this mode of failure.

METHODS

From a series of 1375 hips treated with MMHRA, 21 (20 patients) underwent revision surgery secondary to aseptic loosening of the acetabular component and 6 patients had a radiographically loose acetabular component. A control group of 27 hips (26 patients) was selected among the patients that did not have a revision, and was matched for age, gender, component size and diagnosis.

RESULTS

Mean time to revision in the loosening group was 103.0 months and the mean time of follow-up in the control group was 161.4 months. We found greater activity levels, range of motion scores, and cup abduction angles in the loosening group. The centre-edge (CE) angle of Wiberg was 10° lower in the loosening group compared with the control group. In addition, 11 of the hips from the study group presented a sclerotic halo superior to the cup on the last radiograph vs. none in the control group. There was no difference in the prevalence of postoperative reaming gaps or radiographic signs of neck-cup impingement between the 2 groups.

DISCUSSION

Risk factors for acetabular loosening included hip dysplasia with low CE angle, and a large cup abduction angle. The patient's level of activity influences the appearance of symptoms and the time to revision. We recommend selecting patients with a sufficient CE angle and properly orienting the cup.

Hip resurfacing: history, current status, and future

Hip resurfacing arthroplasty (HRA) presents several advantages over conventional total hip arthroplasty (THA), including conservation and preservation of bone, reduced risk of dislocation, easy replication of hip biomechanics and easy revision if needed. It is a particularly appealing procedure for young patients. HRA has been performed for over 40 years following the same technological advances as THA. The bearing material used by most designs is metal-on-metal (MoM), which has the best compromise between strength and wear properties. However, MoM HRA has a specific set of possible complications. Aseptic femoral failures were initially the most prevalent cause for revision but progress in patient selection and surgical technique seem to have resolved this problem. Wear-related failures (high metal ion levels and adverse local tissue reactions) are now the main concern, and are essentially associated with poor acetabular component design and orientation, to which MoM is more sensitive than other bearing materials. The concept of functional coverage is key to understanding how MoM bearings are affected by edge wear. Only a 3-D assessment of cup position (e.g., the contact patch to rim distance) provides the necessary information to determine the role of cup positioning in relationship with abnormal bearing wear.The concept of hip resurfacing is more valid today than ever as the age of the patients in need of hip arthroplasty keeps getting lower. The recent publication of several excellent long-term survivorship results suggests that selection of a well-designed resurfacing system and accuracy in the placement of the cup can achieve long-term durability.

Migration pattern of a cobalt-chrome monoblock acetabular component after metal-on-metal hip resurfacing

OBJECTIVES

The purpose of this study was to study the initial fixation and migration pattern of a monoblock acetabular component used for a metal on metal hip resurfacing using Einzel Bild Roentgen Analyse (EBRA).

METHODS

99 patients with a mean age of 49.6 years (range 28.5-66.3 years) of whom 14 were bilateral underwent a hip resurfacing (Conserve Plus®, MicroPort, Memphis, TN) for a total of 113 resurfacings. Acetabular component orientation was noted with 35 of the 113 components (31.0%) having a lucency &gt;2 mm on the immediate postoperative radiograph.

RESULTS

The mean follow-up for our cohort of 113 hips is 50 months (2-79 months). When examining the 2-year migration mark, 37 of the 113 hips exceeded the threshold of 0.5 mm/year with a median total migration of 1.40 mm (range 1.02-4.24). 6 resurfacings underwent revision surgery for aseptic loosening of the acetabular component at a mean time of 43.6 months. Presence of initial lucency (OR 2.29, p = 0.05) was the only significant predictor of migration over threshold at 2-years. Those that had migrated over the threshold (1.0 mm) at 2 years were at significantly greater risk of continued migration at 4 years.

CONCLUSIONS

The migration pattern of this component raises concerns about long term performance, with postoperative lucencies representing a significant factor for future migration.

High Re-Operation Rates Using Conserve Metal-On-Metal Total Hip Articulations

Introduction:

Metal-on-metal hip articulations have been intensely debated after reports of adverse reactions and high failure rates. The aim of this study was to retrospectively evaluate the implant of a metal-on.metal total hip articulation (MOM THA) from a single manufacture in a two-center study.

Materials and Methods:

108 CONSERVE^® MOM THA were implanted in 92 patients between November 2005 and December 2010. Patients had at time of retrospective evaluation their journals reviewed for re-operations and adverse reactions.

Results:

20 hips were re-operated (18.4%) at a mean follow up of 53 months. 4 pseudotumors were diagnosed at time of follow up but no substantiated link was made between adverse reactions and re-operations.

Conclusion:

The high re-operation rates found in this study raised concern about the usage of the MOM THA and subsequently lead to the termination of implantation of this MOM THA at the two orthopaedic departments.

Clinical and radiological outcomes with the Durom™ acetabular cup for large-diameter total hip arthroplasty: 177 implants after a mean of 80 months

BACKGROUND

Large-diameter metal-on-metal hip prostheses are no longer used, but their outcomes after more than 5 years are unknown. We conducted a retrospective study with a 6.8-year mean follow-up to assess clinical outcomes after Durom™ cup implantation, including the dislocation rate, comparatively to the reference metal-on-polyethylene bearing. We determined the rate of failure ascribable to Durom™ cup use. We also looked for a sharp drop in the implant survival curve during the follow-up period and for factors associated with adverse reactions to metal debris (ARMDs).

HYPOTHESIS

We hypothesised that clinical outcomes after Durom™ cup implantation were similar to those seen with a metal-on-polyethylene bearing, except for a lower rate of dislocation.

PATIENTS AND METHODS

We included 177 consecutive THA procedures that were performed between 2005 and 2008 in 165 patients with a mean age of 57.6 ± 9.4 years (range, 31-76 years) and involved the implantation of a Durom™ cup, a femoral head greater than 36mm in diameter, and a PF(®) femoral stem (Zimmer, Etupes, France). The mini-posterior approach was used, with 2mm of acetabular overreaming in 82% of cases, a short femoral neck in 75% of cases, and a mean cup inclination of 34 ± 5° (range, 21-50°).

RESULTS

Outcomes were assessed for 156 THA procedures in 146 patients after a mean follow-up of 6 years 8 months. The mean Postel-Merle d'Aubigné score improved from 9.7 ± 2.7 (range, 4-14) to 17.4 ± 1.7 (range, 15-18) and the mean Harris hip score from 45.2 ± 15.3 (range, 9-83) to 96.3 ± 7 (75-100). No episodes of dislocation were recorded. We identified 7 failures ascribable to the Durom™ cup including 6 due to ARMD and 1 to aseptic loosening. Implant survival after a mean of 80months was 95.5% (95% CI, 93.1-99.2), with no sharp drop in the survival curve.

CONCLUSION

The Durom™ cup eliminates the risk of hip dislocation and produces similar functional outcomes to those seen with metal-on-polyethylene bearings after a mean follow-up of 80 months. Nevertheless, given the difficulty in predicting ARMD and hypersensitivity reactions, the Durom™ cup has been discarded and patients carrying it are monitored closely.

Large-diameter metal-on-metal total hip arthroplasty: dislocation infrequent but survivorship poor

BACKGROUND

Use of large-diameter metal-on-metal (MoM) articulations in THA increased, at least in part, because of the possibility of achieving improved joint stability and excellent wear characteristics in vitro. However, there have been subsequent concerning reports with adverse reactions to metal debris (ARMD), pseudotumors, and systemic complications related to metal ions.

QUESTIONS/PURPOSES

The purpose of this study was to determine at a minimum of 2 years' followup (1) the proportion of patients who experienced a dislocation; (2) the short-term survivorship obtained with these implants; (3) the causes of failure and the proportion of patients who developed ARMD; and (4) whether there were any identifiable risk factors for revision.

METHODS

We reviewed the results of 1235 patients who underwent 1440 large-diameter MoM primary THAs at our institution using two acetabular devices from a single manufacturer with minimum 2-year followup. Large-diameter MoM devices were used in 48% (1695 of 3567) of primary THAs during the study period. We generally used these implants in younger, more active, higher-demand patients, in patients considered at higher risk of instability, and in patients with adequate bone stock to achieve stable fixation without use of screws. Clinical records and radiographs were reviewed to determine the incidence and etiology of revision. Patients whose hips were revised were compared with those not revised to identify risk factors; Kaplan-Meier survivorship analysis was performed as was multivariate analysis to account for potential confounding variables when evaluating risk factors. Minimum followup was 2 years (average, 7 years; range, 2-12 years); complete followup was available in 85% of hips (1440 of 1695).

RESULTS

Dislocation occurred in one hip overall (<1%; one of 1440). Kaplan-Meier analysis revealed survival free of component revision was 87% at 12 years (95% confidence interval, 84%-90%). The two most common indications for revision were ARMD (48%; 47 of 108 hips revised) and loosening or failure of ingrowth (31%; 34 of 108). Risk factors for component revision were younger age at surgery (relative risk [RR] 0.98 per each increased year; p=0.02), higher cup angle of inclination (RR 1.03 per each increased degree; p=0.04), and female sex (RR 1.67; p=0.03).

CONCLUSIONS

Large-diameter MoM THAs are associated with a very low dislocation rate, but failure secondary to ARMD and loosening or lack of ingrowth occur frequently. Patients with MoM THA should be encouraged to return for clinical and radiographic followup, and clinicians should maintain a low threshold to perform a systematic evaluation. Early diagnosis and appropriate treatment are recommended to prevent the damaging effects of advanced ARMD.

LEVEL OF EVIDENCE

Level IV, Therapeutic study.

Revisions of monoblock metal-on-metal THAs have high early complication rates

BACKGROUND

A relatively high percentage of monoblock metal-on-metal total hip arthroplasties (THAs) undergo early revision. Revision of these THAs poses challenges unique to this implant type. The early complications after these revisions remain unreported as do the clinical and demographic factors associated with these complications.

QUESTIONS/PURPOSES

We describe (1) the frequency of early complications after revision of monoblock metal-on-metal THA; and (2) the clinical and demographic factors associated with complications.

METHODS

A review of our institution's total joint registry identified 107 patients who underwent 114 revisions of monoblock metal-on-metal THAs. Mean patient age at revision was 60 years (range, 17-84 years), and 65% of the patients were women. Mean followup after revision was 14 months (range, 0-122 months). Revision diagnoses included metallosis (51%), aseptic loosening (27%), infection (7%), pain (6%), malposition (4%), instability (3%), iliopsoas impingement (2%), and periprosthetic fracture (1%). Major complications (instability, infection, aseptic loosening, and wound complications) were documented and included in the analysis. Minor postoperative complications such as urinary tract infection were excluded.

RESULTS

Twenty-three of 114 procedures (20%) involved at least one early complication after revision of monoblock metal-on-metal THA with 18 (16%) undergoing at least one additional subsequent surgery. The most common complications included aseptic loosening (6%), deep infection (6%), dislocation (4%), and acetabular fracture (3%). Patients who sustained a complication after revision surgery were older on average than those who did not (66 years versus 58 years, p=0.003). There were no differences in complication rate with respect to sex, time to revision, or revision diagnosis.

CONCLUSIONS

Complications and reoperations occur frequently after revision for failed monoblock metal-on-metal THA (20% and 16%, respectively), and older patients appear to be at greater risk for complications after these revisions. Aseptic loosening, deep infection, and instability are all of great concern after revision and surgeons should be aware of these potential complications when undertaking revision of these THAs.

LEVEL OF EVIDENCE

Level IV, therapeutic study. See Instructions for Authors for a complete description of levels of evidence.

Cementless total hip arthroplasty with large diameter metal-on-metal heads: short-term survivorship of 8059 hips from the Finnish Arthroplasty Register

BACKGROUND AND AIMS

Population-based register data from the National Joint Register of Australia and England and Wales have revealed that the mid-term outcome of cementless large diameter head metal-on-metal total hip arthroplasty is inferior to that of conventional cemented metal-on-polyethylene total hip arthroplasty. The aim of this study was to compare the results of cementless large diameter head metal-on-metal total hip arthroplasty with conventional cemented arthroplasty in Finland. The second aim of this study was to compare the cementless large diameter head metal-on-metal models with each other.

MATERIAL AND METHODS

Based on the data extracted from the Finnish Arthroplasty Register, the risk of revision of 8059 cementless large diameter head metal-on-metal total hip arthroplasties performed during 2002-2009 was analyzed using Cox regression model. The revision risk of these hips was compared to that of 16,978 cemented metal-on-polyethylene total hip arthroplasties performed during the same time period.

RESULTS

In the Cox regression analysis, there was no difference in revision risks between cementless large diameter head metal-on-metal total hip arthroplasty and cemented metal-on-polyethylene total hip arthroplasty (relative risk = 0.90, confidence interval = 0.74-1.10, p = 0.3). However, in female patients aged 55 years or above, cementless large diameter head metal-on-metal total hip replacements showed a significantly increased risk of revision as compared to cemented total hip replacements (relative risk = 1.33, confidence interval = 1.04-1.70). Compared to the reference implant in this study (cementless Synergy stem combined with Birmingham Hip Resurfacing [BHR] cup), the CementLess Spotorno (CLS) stem combined with Durom cup had a 2.9-fold (95% confidence interval = 1.17-6.90) increased risk of revision.

CONCLUSIONS

We found that cementless large diameter head metal-on-metal total hip arthroplasty had short-term survivorship compared with cemented total hip arthroplasty at a nation-wide level. However, in female patients aged 55 years or above, cementless large diameter head metal-on-metal total hip arthroplasty showed inferior results. Furthermore, implant design had an influence on revision rates. Longer follow-up time is needed to assess the success of large diameter head metal-on-metal total hip arthroplasty.

Results of Birmingham hip resurfacing at 12 to 15 years

We report a 12- to 15-year implant survival assessment of a prospective single-surgeon series of Birmingham Hip Resurfacings (BHRs). The earliest 1000 consecutive BHRs including 288 women (335 hips) and 598 men (665 hips) of all ages and diagnoses with no exclusions were prospectively followed-up with postal questionnaires, of whom the first 402 BHRs (350 patients) also had clinical and radiological review.

Mean follow-up was 13.7 years (12.3 to 15.3). In total, 59 patients (68 hips) died 0.7 to 12.6 years following surgery from unrelated causes. There were 38 revisions, 0.1 to 13.9 years (median 8.7) following operation, including 17 femoral failures (1.7%) and seven each of infections, soft-tissue reactions and other causes. With revision for any reason as the end-point Kaplan–Meier survival analysis showed 97.4% (95% confidence interval (CI) 96.9 to 97.9) and 95.8% (95% CI 95.1 to 96.5) survival at ten and 15 years, respectively. Radiological assessment showed 11 (3.5%) femoral and 13 (4.1%) acetabular radiolucencies which were not deemed failures and one radiological femoral failure (0.3%).

Our study shows that the performance of the BHR continues to be good at 12- to 15-year follow-up. Men have better implant survival (98.0%; 95% CI 97.4 to 98.6) at 15 years than women (91.5%; 95% CI 89.8 to 93.2), and women < 60 years (90.5%; 95% CI 88.3 to 92.7) fare worse than others. Hip dysplasia and osteonecrosis are risk factors for failure. Patients under 50 years with osteoarthritis fare best (99.4%; 95% CI 98.8 to 100 survival at 15 years), with no failures in men in this group.

Cite this article: Bone Joint J 2014;96-B:1298–1306.

A minimum 5-year follow-up of an oxidized zirconium femoral prosthesis used for total knee arthroplasty

BACKGROUND

Bearing surface wear remains a potential concern amongst younger patients undergoing total knee arthroplasty (TKA). Because of the potential for lower prosthetic wear rates, oxidized zirconium is a potentially attractive bearing surface for TKA in young, active patients. This material is also well suited for patients with suspected nickel sensitivities as it has no measurable nickel content, in contrast to standard femoral bearings made of cobalt-chromium alloys. Although in vitro testing on knee wear simulators has demonstrated favorable wear characteristics of oxidized zirconium compared to traditional cobalt-chrome bearings, in vivo clinical outcome data with this novel bearing surface are sparse.

METHODS

We retrospectively reviewed 109 consecutive TKAs in 82 patients at a minimum of five years postoperatively to determine prosthetic survivorship and to assess whether any adverse clinical consequences could be attributed to this bearing. Knees were evaluated with Knee Society scores, UCLA activity scores, clinical examinations, and radiographs. The mean age for this cohort was 58.7 years.

RESULTS

Survivorship free of bearing related complications was 100% at a minimum of five years post-surgery. There were no revisions for loosening, osteolysis, implant failure, or deep infection. There were no knees with radiographic failure, visible wear, loosening, or osteolysis.

CONCLUSION

Oxidized zirconium remains an attractive option for patients with nickel sensitivities and in those patients at risk for prosthetic wear due to young age or high activity levels.

Metal-on-metal hip resurfacing compared with 28-mm diameter metal-on-metal total hip replacement: a randomised study with six to nine years' follow-up

A total of 219 hips in 192 patients aged between 18 and 65 years were randomised to 28-mm metal-on-metal uncemented total hip replacements (THRs, 107 hips) or hybrid hip resurfacing (HR, 112 hips). At a mean follow-up of eight years (6.6 to 9.3) there was no significant difference between the THR and HR groups regarding rate of revision (4.0% (4 of 99) vs 5.8% (6 of 104), p = 0.569) or re-operation rates without revision (5.1% (5 of 99) vs 2.9% (3 of 104), p = 0.428). In the THR group one recurrent dislocation, two late deep infections and one peri-prosthetic fracture required revision, whereas in the HR group five patients underwent revision for femoral head loosening and one for adverse reaction to metal debris. The mean University of California, Los Angeles activity scores were significantly higher in HR (7.5 (sd 1.7) vs 6.9 (sd 1.7), p = 0.035), but similar mean Western Ontario and McMaster Universities Osteoarthritis Index scores were obtained (5.8 (sd 9.5) in HR vs 5.1 (sd 8.9) in THR, p = 0.615) at the last follow-up. Osteolysis was found in 30 of 81 THR patients (37.4%), mostly in the proximal femur, compared with two of 83 HR patients (2.4%) (p < 0.001). At five years the mean metal ion levels were < 2.5 μg/l for cobalt and chromium in both groups; only titanium was significantly higher in the HR group (p = 0.001). Although revision rates and functional scores were similar in both groups at mid-term, long-term survival analysis is necessary to determine whether one procedure is more advantageous than the other.

Early failure of the Durom prosthesis in metal-on-metal hip resurfacing in Chinese patients

Hip resurfacing (HR) is being used increasingly as an alterative to total hip arthroplasty in osteonecrosis (ON) and ankylosing spondylitis (AS) of the hip. We performed 141 consecutive HR arthroplasties in 111 patients comprising 3 etiology groups: ON, AS, and osteoarthritis (OA). After retrospective study of retrieved components, we hypothesized that the main reason for revision was femoral loosening in the ON group (4 of 46 hips; 8.7%) and femoral-neck fracture in the AS group (3 of 58 hips; 5.2%). Necrotic areas were seen on femoral heads retrieved from patients with femoral loosening, whereas femoral heads were fixed tightly to components in patients with femoral-neck fractures. Etiology may be an important risk factor for postoperative complications.

The Effect Of Different Bearing Surfaces On Metal Ion Levels In Urine Following 28 Mm Metal-On-Metal And 28 Mm Metal-On-Polyethylene Total Hip Arthroplasty

Background and Aims:

Recent advancements in manufacturing technology have enabled more precise tolerances and surface finishes using metal-on-metal bearing surfaces in total hip arthroplasty. The aim of this study was to compare the level of metal ions in urine after implantation of a 28-mm metal-on-metal bearing manufactured from high-carbon wrought alloy and a 28-mm metal-on-polyethylene bearing.

Material and Methods:

A total of 92 total hip arthroplasty patients were prospectively randomized into two groups: those receiving metal-on-metal bearings and those receiving metal-on-polyethylene bearings. Chromium, cobalt, and molybdenum ion levels in urine were measured preoperatively and at 1 year and 2 years postoperatively.

Results:

In the metal-on-polyethylene group, there was a slight increase in mean chromium and cobalt concentrations at 2-year follow-up compared to the preoperative level (p = 0.02 for both chromium and cobalt). In the metal-on-metal group, there was a 15-fold increase in chromium and a 26-fold increase in cobalt at 2-year follow-up compared to the preoperative level (p < 0.001 for both chromium and cobalt). However, the quantity of chromium and cobalt in urine from the metal-on-metal group was not higher at 2-year follow-up than at 1-year follow-up (p = 0.5 and p = 0.6, respectively).

Conclusions:

The 28-mm metal-on-metal bearings yield chromium and cobalt concentrations in urine that can be higher than those recommended for occupational exposure. However, our results also indicate that a steady state in wear and ion production using metal-on-metal total hip arthroplasty can occur.

Poor short term outcome with a metal-on-metal total hip arthroplasty

Metal-on-metal (MoM) bearings for total hip arthroplasty (THA) have come under scrutiny with reports of high failure rates. Clinical outcome studies with several commercially available MoM THA bearings remain unreported. We evaluated 78 consecutive MoM THAs from a single manufacturer in 68 patients. Sixty-six received cobalt-chrome (CoCr) monoblock and 12 received modular titanium acetabular cups with internal CoCr liners. Femoral components were titanium with modular necks. At average 2.1 years postoperatively, 12 THAs (15.4%) demonstrated aseptic failure (10 revisions, 2 revision recommended). All revised hips demonstrated capsular necrosis with positive histology reaction for aseptic lymphocytic vasculitis-associated lesions/adverse local tissue reactions. Prosthetic instability following revision surgery was relatively common. Female gender was a strong risk factor for failure, though smaller cups were not. Both monoblock and modular components fared poorly. Corrosion was frequently observed around the proximal and distal end of the modular femoral necks.

Incidence of pseudotumor and acute lymphocytic vasculitis associated lesion (ALVAL) reactions in metal-on-metal hip articulations: a meta-analysis

We systematically reviewed the peer-reviewed literature to determine a pooled estimate of the incidence of pseudotumor and acute lymphocytic vasculitis associated lesions (ALVAL) in adult patients with primary metal-on-metal (MoM) total hip arthroplasty or resurfacing. Fourteen eligible articles were identified, with a total of 13,898 MoM hips. The incidence of pseudotumor/ALVAL ranged from 0% to 6.5% of hips with a mean follow-up ranging from 1.7 to 12.3 years across the studies. The pooled estimated incidence of pseudotumor/ALVAL is 0.6% (95% CI: 0.3% to 1.2%). The rate of revision for any reason ranged from 0% to 14.3% of hips, with a pooled estimate of 3.9% (95% CI: 2.7% to 5.3%).

Early failures in large head metal-on-metal total hip arthroplasty

Concerns have recently been raised about large head metal-on-metal total hip arthroplasties (LDH THA). Metal ion release due to wear may cause osteolysis, pseudotumours and necrosis. In addition, fixation of certain acetabular components is thought to be suboptimal. We present the short term outcome of the Durom LDH THA. Retrospectively, a consecutive series of 64 implants in 60 patients was analysed with a mean follow-up of 37 months. Clinical and radiological evaluation was performed on a regular basis, followed by additional evaluations when indicated. The 10-year revision percentage was calculated and compared with National Institute for Health and Clinical Excellence (NICE) standards. Six patients (six hips) underwent cup revision (9%). Four of these cups showed no or minimal bone fixation. Three patients had a pseudotumour. In two revision cases, ALVAL (aseptic lymphocyte-dominated vasculitis-associated lesion) was present. Lack of bone ingrowth and the presence of ARMD (adverse reaction to metal debris) seem to contribute to a high failure rate of the Durom LDH THA. The predicted ten-year revision rate of 14.2% (95% CI 5.6-22.8) is, given the broad confidence interval, not significantly outside NICE recommended standards. However, it is not clear which factors, if any, predict implant failure. Therefore, we do not advocate the use of this implant.

The Durom acetabular component. a concise follow-up of early revision rates at a minimum of 2 years

We report our experience with 143 Durom acetabular components. Our data show a survivorship of 99.2% at 5 years, (95% CI 94.8-99.9), which is not consistent with other reports in the literature of high early failure rates. The true natural history of this component is yet to unfold completely.

Are implant designer series believable? Comparison of survivorship between designer series and national registries

Performance of hip and knee implants reported by the designing surgeon(s) is often felt to be more optimistic than those observed in non-designer series. The purpose of this study is to compare the survivorship of hip and knee prostheses in series reported by designers with those in national joint registries. Fifteen different hip and knee implant results published by designers were identified and compared to four national registries. Thirty-two percent of comparisons performed demonstrated greater survivorship in the designer series compared to the registry, while 0% reported lower, and 68% demonstrated no difference. Two implants accounted for the majority (12/16) of the discordances. There was a lower (62%) concordance rate between the registries than between the designer series and registries (68%).

Cementless total hip arthroplasty in patients with osteonecrosis after kidney transplantation

This study was to determine the mid- to long-term survivorship of cementless metal-on-metal THA in 52 patients (74 hips) who underwent THA for osteonecrosis of the femoral head with a cementless THA. The mean follow-up was 10.2 years. The mean age at operation was 42.1 years (range, 25-62 years). The survivorship analysis with revision as the end point estimated a 96.6% chance of THA survival during 16.4 years. The average Harris hip score at last follow-up was 89.2 points (range, 74-100). Two patients (two hips) required revision surgery for extensive acetabular osteolysis at 9 years and acetabular liner dissociation at 2 years. The survival rates of cementless THA in these patients are encouraging. However, the possibility of metallic wear related complications are raising concern.

[Revision rates in journal publications on joint prostheses with noticeably high failure rates in register data sets]

BACKGROUND AND AIM OF STUDY

The value of outcome quality data from clinical studies is an issue of controversial debate particularly in the context of adverse events. The aim of this study is to present and evaluate the data available from clinical studies for products that show inferior outcome in registers and to assess the possibility to draw valid conclusions from these data. STUDY DESIGN AND ANALYTICAL METHODS: Based on a structured literature research, a comparative analysis was made of the revision rates of 12 products showing significantly inferior average results in registers. The primary outcome parameter was the revision rate for any reason calculated using a standardized methodology and the parameter of revisions per 100 observed component years.

RESULTS

For 5 out of 12 products not a single comparable study was available and relatively few data were available for the remaining products. A conventional meta-analysis revealed that only three products showed results that were comparable with those from registers. For 75% of products good results were published. There was not a single case where it would have been possible to identify or isolate the problems that had led to the underperformance observed on the basis of clinical studies alone.

DISCUSSION

Clinical sample-based studies are not a suitable and reliable means to recognize potential product or handling problems and avoid risks for patients and physicians. In this respect registers can provide an essential contribution.

Bone remodelling around uncemented metallic and ceramic acetabular components

Stress shielding–induced bone resorption around cementless acetabular components has been indicated as a potential failure mechanism that may threaten long-term fixation. Using a bone remodelling algorithm in combination with three-dimensional finite element models of intact and implanted pelvises and musculoskeletal loading during normal walking, the objectives of the study were to investigate the deviations in load transfer due to implantation and bone adaptation around cementless metallic and ceramic acetabular components. Variations in implant–bone interfacial condition affected strain shielding and bone remodelling; strain shielding was higher for the bonded condition as compared to the debonded condition. For bonded interfacial condition, severe bone resorption, 20%–50% bone density reduction, was observed within the acetabulum. Considering debonded implant–bone interface, bone density increase of 50%–60% was observed around the supero-posterior part of acetabulum, whereas bone density reductions were low (2%–15%) in other locations. The implant–bone interface appeared less likely to fail, post-operatively and after bone remodelling. Moreover, the implant–bone micromotion was found to be low, less than 100 µm. Strain shielding and bone remodelling were almost similar for the metallic and ceramic components. Based on the results of this study, the ceramic acetabular component appeared to be a viable alternative to metal.

Patients report improvement in quality of life and satisfaction after hip resurfacing arthroplasty

BACKGROUND

A number of reconstructive procedures are available for the management of hip osteoarthritis. Hip resurfacing arthroplasty is now an accepted procedure, with implant survivorship comparable to THA at up to 10 years' followup in certain series. Most reports focus on implant survivorship, surgeon-derived results, or complications. Fewer data pertain to patient-reported results, including validated measures of quality of life (QoL) and satisfaction and baseline measures from which to determine magnitude of improvement. Validated patient-reported results are essential to guide patients and surgeons in the current era of informed and shared decision making.

QUESTIONS/PURPOSES

We determined whether patients reported improvement in disease-specific, joint-specific, and generic QoL after hip resurfacing arthroplasty; whether patients were satisfied with the results of the procedure; and latest activity level and return to sport.

METHODS

We retrospectively reviewed 127 patients (100 men, 27 women) who underwent 143 hip resurfacing procedures between 2002 and 2006. Mean patient age was 52 years. Patients completed the WOMAC, Oxford Hip Score, and SF-12 at baseline and again at minimum 2-year followup (mean, 2.5 years; range, 2-6 years). At latest followup, patients completed a validated satisfaction questionnaire and UCLA activity score.

RESULTS

All QoL scores improved (normalized to a 0-100 scale, where 100 = best health state). WOMAC improved from 46 to 95, Oxford Hip Score from 42 to 95, SF-12 (physical) from 34 to 54, and SF-12 (mental) from 46 to 56. Patient satisfaction score was 96. UCLA activity score was 8.

CONCLUSIONS

The majority of patients reported improvement in QoL, were very satisfied with their outcome, and returned to a high level of activity after hip resurfacing arthroplasty.

LEVEL OF EVIDENCE

Level IV, therapeutic study. See the Instructions for Authors for a complete description of levels of evidence.

Graduated introduction of orthopaedic implants: encouraging innovation and minimizing harm

There is continued pressure for the development of innovative orthopaedic surgical devices and techniques to meet the demands of increasingly younger and more active patients. However, as demonstrated by several recent orthopaedic implant withdrawals and recalls, clinically important unknown modes of failure for newly introduced devices may not become apparent for several years after widespread adoption, affecting a large number of patients. Different reasons have been implicated for this problem, including weaknesses in the United States medical device approval process, as well as deficiencies in mechanisms for post approval implant performance monitoring. Several remedies have been proposed over the past decades. We aim to stimulate discussion concerning the adoption of orthopaedic technology by describing the concept of a graduated implant approval process for orthopaedic devices that builds on recommendations previously made by other authors; by explaining how this will benefit patients, surgeons, and device manufacturers; and by clarifying why the time has come for the orthopaedic community to reconsider the adoption of such a process.

Corrosion at the cone/taper interface leads to failure of large-diameter metal-on-metal total hip arthroplasties

BACKGROUND

Metal-on-metal (MoM) THAs have reduced wear rates compared with metal-on-polyethylene. However, elevated serum metal ion levels and pseudotumors have been reported in large MoM articulations.

QUESTIONS/PURPOSES

We therefore determined (1) if corrosion occurred at the cone/taper interface leading to instability in patients with large-diameter THAs; (2) how patients presented clinically and radiographically; (3) if adverse periprosthetic tissue reactions occurred; (4) whether metal was released from the implants into the periprosthetic tissues; and (5) if head size correlated with metal release.

METHODS

We reviewed 114 patients who had revisions of large-diameter head MoM articulations. Mean time of implantation was 46 months. To identify adverse reactions and particle load, tissues were stained by hematoxylin and eosin and CD3/CD20/CD68 antibodies. Periprosthetic tissues were analyzed for metal content and distribution in different regions. Electrochemical reactions between the stem and adapter were investigated by a minicell electrode.

RESULTS

Electrochemical studies on the stem and the head adapter showed a risk for galvanic corrosion. Ninety-four percent of patients had instability at the cone/taper interface. All patients presented with early clinical symptoms; 59 patients had radiographic signs of loosening. One hundred four patients had foreign body reactions and necrosis. The largest amounts of metal released were titanium or iron. We found no correlation between head size and metal ion release.

CONCLUSIONS

These findings suggest that in modular cone/taper connections, friction of the MoM articulations may cause failure of the cone/taper interface leading to galvanic corrosion and loosening. It is unclear whether the design of this MoM system provides sufficient stability at the taper.

What are the risks accompanying the reduced wear benefit of low-clearance hip resurfacing?

BACKGROUND

Clearance is an important determinant of metal-metal bearing function. Tribologic theory and laboratory evidence suggest low clearance (LC) reduces wear but with a potential to increase friction and clinical reports show LC resurfacings have high implant failure rates. Thus, the role of LC is unclear.

QUESTIONS/PURPOSES

We asked: is in vivo wear as reflected by cobalt (Co) and chromium (Cr) levels reduced in LC bearings, and if so, is this benefit offset by increased friction as assessed by implant-bone interface changes?

METHODS

We retrospectively reviewed 26 patients with LC resurfacings. We assessed Co and Cr levels in blood and urine, hip function, and radiographic adverse features. These data were compared with those from 26 patients with a similar resurfacing but with conventional clearance (CC) from a previous study. Minimum followup was 4.0 years (mean, 4.1 years; range, 4.0-4.7 years).

RESULTS

Co and Cr ion comparisons showed three phases: in the first 2 months, there was no difference between the cohorts; at 2 to 24 months, the CC group showed higher levels; and subsequently, levels in the two groups converged. A mean Oxford hip score of 13 and step activity of 1.9 million cycles per year in the LC group were similar to those of the CC group. Cup radiolucencies were seen in three patients in the LC group and none in the CC group.

CONCLUSIONS

Lower Co and Cr levels suggest lower wear in the LC resurfacings in the intermediate term, but the presence of radiolucencies raises the concern that higher bearing friction is affecting implant fixation. A larger clearance than the theoretically predicted ideal may be required to allow for minor manufacturing imperfections, component deformation, and progressive changes in the in vivo lubricant.

LEVEL OF EVIDENCE

Level III, therapeutic study. See the Guidelines for Authors for a complete description of levels of evidence.

Incidence and natural course of initial polar gaps in Birmingham Hip Resurfacing cups

The purpose of this study was to retrospectively investigate the incidence of initial polar gaps and their effect on clinical results in Birmingham Hip Resurfacing cups. A total of 151 hips in 134 patients who underwent hip resurfacing at a mean age of 50 years were examined. The mean follow-up period was 7 years. A polar gap was identified in 47 hips (31%) with a mean width of 2.1 mm. Gaps of 2 mm or more were identified in 21 hips, 6 of which showed reductions in cup inclination during the initial 3 months. After 3 months, no progressive cup migration was observed. There was no cup revision. All gaps were filled with bone within 2 years of surgery. The initial polar gaps had no significant influence on the stability of hydroxyapatite-coated Porocast cobalt-chromium hemispherical monoblock cups (Midland Medical Technologies Ltd, Birmingham, UK), although gaps of 2 mm or more had a higher risk of early migration.

Chemical speciation of nanoparticles surrounding metal-on-metal hips

Spectromicroscopy of tissue surrounding failed CoCr metal-on-metal hip replacements detected corroded nanoscale debris in periprosthetic tissue in two chemical states, with concomitant mitochondrial damage. The majority of debris contained Cr(3+), with trace amounts of oxidised cobalt. A minority phase containing a core of metallic chromium and cobalt was also observed.

Pseudotumors are common in well-positioned low-wearing metal-on-metal hips

BACKGROUND

Pseudotumors are sterile inflammatory lesions found in the soft tissues surrounding metal-on-metal (MOM) and metal-on-polyethylene hip arthroplasties. In patients with MOM hip arthroplasties, pseudotumors are thought to represent an adverse reaction to metal wear debris. However, the pathogenesis of these lesions remains unclear. Currently, there is inconsistent evidence regarding the influence of adverse cup position and increased wear in the formation of pseudotumors.

QUESTIONS/PURPOSES

We therefore determined whether pseudotumor formation was associated with (1) adverse cup position, (2) raised metal ion levels, and (3) increased wear rates of the retrieved components.

METHODS

We retrospectively reviewed all 352 patients for whom we had retrieved specimens from revisions of a current-generation MOM hip prosthesis between February 2008 and September 2010; of these, 105 met our inclusion criteria. We used multivariate logistic regression analysis to compare acetabular orientation, metal ion levels before revision, and component wear rates between patients with (n = 72) and without (n = 33) pseudotumors, according to findings on metal artifact reduction sequence MRI.

RESULTS

The proportion of patients demonstrating evidence of a pseudotumor in well-positioned hips was similar to those with adverse cup positions (67% and 66%, respectively). Patients revised with pseudotumors had similar whole-blood metal ion levels and component wear rates to those who were not revised.

CONCLUSIONS

Pseudotumors were not associated with increased wear or metal ion levels, suggesting patient susceptibility is likely to be more important.