Acetabular component positioning using anatomic landmarks of the acetabulum

A novel intraoperative acetabular reaming center locating method in total hip arthroplasty for Crowe type IV developmental dysplasia of the hip: a retrospective cohort study

PURPOSE

Although the principles of hip reconstruction are consistent, due to lack of reliable anatomical landmarks, how to decide the acetabular cup reaming centre intraoperatively in Crowe IV patients with developmental dysplasia of the hip (DDH) remains unclear. This study aims to address this question.

METHODS

Fifty-eight Crowe IV patients were enrolled from 2017 to 2019. By examining our previous clinical data, we analyzed the anatomical morphology of Crowe IV acetabulum and proposed a method of locating intraoperative reaming centering for implantation of a standard-sized acetabular cup, which is the upper two thirds of the posterior border of the true acetabulum. All patients included in this study were reamed according to this method. The average postoperative follow-up was 4.1 years (3-5 years). The position of the centre of rotation (COR), cup coverage (CC), and optimal range of joint motion (ROM) were examined by 3D computer simulation measurement. Postoperative complications and hip Harris score were collected and analyzed.

RESULTS

The morphology of the type IV DDH true acetabulum was mostly triangular. The intraoperative reaming centre were centered on the upper two thirds of the posterior border of the true acetabulum. The postoperative 3D CC was 80.20% ± 7.63% (64.68-90.24%, 44-48-mm cup size). The patients' mean Harris score improved from 39.7 ± 20.4 preoperatively to 91.5 ± 8.12 at the last follow-up.

CONCLUSION

Our study demonstrated that satisfactory CC and clinical results could be achieved by implanting a standard-sized cup with the reaming centre on the upper two thirds of the posterior border of the true acetabulum.

Outcomes of Hybrid Total Hip Arthroplasty for Subchondral Insufficiency Fracture of the Femoral Head

Background

The purpose of this study was to evaluate functional outcomes, radiologic results, and complications after hybrid total hip arthroplasty (THA) in patients with subchondral insufficiency fractures (SIFs) of the femoral head.

Methods

From June 2009 to December 2020, among 985 patients who underwent hybrid THA at our hospital, 19 patients diagnosed with SIF through a retrospective chart review were included. Those under 50 years of age, with radiographic findings of osteonecrosis on the contralateral side of surgery, a history of organ transplantation, and alcohol abuse, were excluded. Functional evaluation was performed using a modified Harris Hip Score (HHS). After surgery, inclination and anteversion of the acetabular cup and version of the femoral system were measured using postoperative x-ray. The outpatient follow-up was performed at 6 weeks, 3 months, 9 months, and 12 months after surgery and every year thereafter. Complications including dislocation, implant loosening, stem subsidence, and periprosthetic infection were observed on follow-up radiographs.

Results

The average follow-up time was 29.3 ± 9.1 months (range, 24-64 months) with no loss to follow-up. The mean modified HHS was 83.4 ± 9.6 (range, 65-100) at the last outpatient clinic follow-up. The average inclination of the acetabular cup was 41.9° ± 3.4° (range, 37°-48°), and the anteversion was 27.5° ± 6.7° (range, 18°-39°). The version of the femoral stem was 19° ± 5.7° (range, 12°-29°). There was no case of intraoperative fracture. There were no cases of dislocation, loosening of the cup, subsidence of the femoral stem, intraoperative or periprosthetic fracture, or periprosthetic infection on the follow-up radiographs.

Conclusions

In our study, hybrid THA showed favorable outcomes in patients diagnosed with SIF, and there were no further special considerations as for THA performed due to other diseases or fractures.

Optimization of Acetabular Cup Abduction by Adjusting Pelvic Pitch

Background

The purposes of this study were to determine the accuracy of our cup positioning method and to evaluate the dislocation rate after total hip arthroplasty (THA).

Methods

After positioning the patient in the lateral decubitus position on the operation table, an anteroposterior view of the hip was taken. The pelvic pitch was measured on the X-ray. A positive pitch was defined as the caudal rotation of the upper hemipelvis. Our target abduction of the cup was 43°. We used the cup holder to guesstimate the cup abduction. In a preliminary study, we found that the weight of the cup holder increased the pelvic pitch by 5°. Thus, the target abduction of the cup holder was calculated by a formula: 43° - pelvic pitch - 5°. During the cup insertion, the cup holder was anteverted to the calculated target according to the concept of combined anteversion. We evaluated 478 THAs (429 patients), which were done with the use of the method.

Results

The mean cup abduction was 43.9° (range, 32.0°-53.0°) and the mean error of cup abduction was 2.4° (standard deviation [SD], 2.0°; range, 0.0°-11.0°). The mean cup anteversion was 28.5° (range, 10.0°-42.0°) and the mean error of cup anteversion was 6.7° (SD, 5.2°; range, 0.0°-27.6°). Of all, 82.4% of the cups (394 / 478) were within the safe zone: 30°-50° abduction and 10°-35° anteversion. During 2- to 5-year follow-up, no hip dislocated.

Conclusions

Our adjusting method according to the pelvic pitch can be a reliable option for optimizing the cup abduction in THA.

CT-based, robotic-arm assisted total hip arthroplasty (Mako) through anterior approach provides improved cup placement accuracy but no difference in clinical outcomes when compared to conventional technique

BACKGROUND

With the restoration of the natural hip biomechanics, a successful total hip arthroplasty (THA) and long-term survival is pursued. Although robotic THA (rTHA) has been developed to increase accuracy of implant positioning, leg lengths and offsets, discussions about its radiological and clinical advantages over conventional THA (cTHA) continues.

OBJECTIVE

The aim of this study was to compare clinical and radiological outcomes of robotic and conventional THA.

METHODS

This retrospective study compares functional and radiological outcomes of 82 rTHA with a matched group of 82 cTHA in terms of age, sex, body mass index and preoperative functional scores. The minimum follow up was 12 months for all patients. Functional outcomes were Harris Hip Score (HHS) and the Western Ontario and McMaster University Osteoarthritis index (WOMAC) evaluated pre- and postoperatively. Radiological evaluations included position of cup placement according to Lewinnek and Callanan safe zones, Canal Fill Ratio (CFR), Leg Length Discrepancy (LLD), Lateral offset (LO) and Femoral Component Alignment (FCA). Complications were also evaluated.

RESULTS

In the rTHA group, 91.5% (75 out of 82) of the acetabular cups were positioned within the safe zone whereas it was 63.4% (52 out of 82) for the cTHA group (p< 0.001). According to Callanan, they were 84.1% and 50%, respectively (p< 0.001). Between the groups, no statistically significant difference was found in CFR, LLD, HO, FCA, AI, AA, WOMAC, HHS and major complication rates.

CONCLUSION

rTHA is superior to cTHA in terms of accuracy and reproducibility of the cup placement, however no apparent clinical benefit was found in short term follow.

Anatomical cup implantation assisted with dynamic 3D planning improves functional outcomes in primary total hip arthroplasty: A retrospective study

BACKGROUND

Anatomical cup implantation is a promising approach in primary total hip arthroplasty (THA) and improves functional outcomes.

OBJECTIVE

We aimed to evaluate the cup position and functional outcomes in primary THA with preoperative dynamic 3D planning.

METHODS

We retrospectively reviewed 54 hips in 48 patients who underwent primary THA with anatomical cup implantation (mean follow-up time: 52 months). Cup positions were evaluated based on patient-specific morphology, the acetabular fossa and the combined anteversion test. Functional outcomes were assessed after THA. The paired-sample t-test was performed for surgical and contralateral native hips among 42 patients who underwent unilateral THA.

RESULTS

Two hips suffered intraoperative trochanteric fracture, but no hip dislocations occurred. No patients reported groin or thigh pain, and all patients were capable of deep squatting and one-leg standing. The mean Harris hip score, WOMAC score, and physical SF-36 score were 94.46 ± 6.16, 10.41 ± 3.62, and 95.19 ± 8.74, respectively. Except for acetabular offset, THA restored biomechanics to those of contralateral native hip, including cup anteversion, abduction, femoral offset and acetabular height (P> 0.05).

CONCLUSION

This study provided evidence for the application of anatomical cup implantation assisted with dynamic 3D planning in primary THA, which restored morphology and improved functional outcomes.

Anterior and Lateral Femoroacetabular Excursion Angles Are Helpful for Assessing Femoroacetabular Impingement Syndrome: A Cross-Sectional Cohort Study

PURPOSE

To develop a radiographic measurement to evaluate the femoroacetabular space using 3-dimensional (3D) hip models in asymptomatic hips, and to evaluate the reliability and validity of the femoroacetabular excursion angle (FAEA) in symptomatic patients.

METHODS

From January 2020 to December 2020, we recruited patients with healthy hips to establish 3D models. Through the simulation of 14 activities of daily living (ADLs), anterior and lateral impingement-free FAEAs were measured. Another cross-sectional cohort was formed from consecutive symptomatic subjects with impingement signs during the same period. In the validation cohort, anterior and lateral FAEAs were assessed on modified Dunn's and anteroposterior views of the hip, respectively. We evaluated the reliability and clinical implications of the FAEAs.

RESULTS

In the discovery cohort (n = 33), hips with collisions tended to have smaller computed tomography-based FAEAs than collision-free hips, although alpha and lateral center-edge (CE) angles were comparable. Additionally, hips with a lower quartile of FAEAs had a significantly higher number of ADLs with collisions. In the validation cohort (n = 411), the FAEA measurement was highly reliable (kappa statistics >0.95 for both interobserver and intraobserver reliabilities). The femoroacetabular impingement syndrome (FAIS) group (n = 165) showed significantly smaller anterior and lateral FAEAs than the non-FAIS group (all P < .001, Cramer V = .420). The optimal cut-off values for anterior and lateral FAEAs were 32.6° and 48.9°, respectively. In univariate regression, anterior (odds ratio [OR] = 0.91; 95% confidence interval [CI] = 0.89-0.94) and lateral (OR = 0.91; 95% CI = 0.89-0.93) FAEAs were significantly associated with FAIS. Moreover, in multivariate regression adjusted for alpha and lateral CE angles, anterior FAEA remained a significant predictor (OR = 0.96; 95% CI = 0.93-0.99), and small FAEA was an independent risk factor for FAIS (OR = 1.99; 95% CI = 1.06-3.71) for any small FAEA (OR = 2.88; 95% CI = 1.32-6.31) for both small FAEAs.

CONCLUSION

The FAEA is a valid measurement for FAIS with high reliability. Small FAEA was an independent risk factor for FAIS in the multivariate regression model, even after adjusting for alpha and lateral CE angles.

LEVEL OF EVIDENCE

Level III, diagnostic study.

Effect of Total Hip Arthroplasty on Ipsilateral Lower Limb Alignment and Knee Joint Space Width: Minimum 5-Year Follow-up

BACKGROUND

This study aimed to 1) assess the effect of total hip arthroplasty (THA) on coronal limb alignment, namely, the hip-knee-ankle angle (HKA), 2) identify factors that determine changes in the HKA, and 3) determine whether alignment changes influence the knee joint space width.

METHODS

We retrospectively evaluated 266 limbs of patients who underwent THA. Three types of prostheses with neck shaft angles (NSAs) of 132°, 135°, and 138° were used. Several radiographic parameters were measured in the preoperative and final radiographs (at least 5 years after THA). A paired t-test was used to confirm the effect of THA on HKA change. Multiple regression analysis was performed to identify radiographic parameters related to HKA changes following THA and changes in knee joint space width. Subgroup analyses were performed to reveal the effect of NSA change on the HKA change, and the proportion of total knee arthroplasty usage and changes in radiographic parameters between maintained joint space and narrowed joint space groups were compared.

RESULTS

The preoperative mean HKA was 1.4° varus and increased to 2.7° varus after THA. This change was related to changes in the NSA, lateral distal femoral angle, and femoral bowing angle. In particular, in the group with a decrease in NSA of > 5°, the preoperative mean HKA was largely changed from 1.4° varus to 4.6° varus after THA. The prostheses with NSA of 132° and 135° also led to greater varus HKA changes than those with an NSA of 138°. Narrowing of the medial knee joint space was related to changes in the varus direction of the HKA, decrease in NSA, increase in femoral offset.

CONCLUSION

A large reduction in NSA can lead to considerable varus limb alignment after THA, which can have adverse effects on the medial compartment of the ipsilateral knee.

Ten to 13-Year Results of Delta Ceramic-on-Ceramic Total Hip Arthroplasty in Patients Less Than 30 Years Old

BACKGROUND

We previously reported mid-term results of total hip arthroplasty (THA) using Delta ceramic-on-ceramic (CoC) bearings in 72 patients (86 hips) who were <30 years old. Noise was noted in 8 (9.3%) of the hips, no osteolysis or loosening was detected, and no patient required reoperation. The purpose of this study was to assess clinical and radiographic outcomes, complications, and survivorship at >10 years after THA using Delta CoC bearings in patients who were <30 years old.

METHODS

Cementless THA with a Delta CoC bearing was performed between March 2008 and January 2012 in 91 hips of 76 patients who were <30 years old. Eighty-five hips in 71 patients (44 men and 27 women) with a mean age of 25.9 years (range, 16 to 29 years) at surgery were followed for a mean of 10.9 years (range, 10 to 13 years).

RESULTS

No ceramic bearings fractured. The incidence of squeaking increased to 5.9% (5 of 85), but the squeaking was not reproducible within individual patients. Periprosthetic osteolysis developed in 3 hips (3 patients): around the stem in 2 and around the metal shell in 1. The stem in 1 hip underwent revision because of a Vancouver type-B2 periprosthetic femoral fracture. One patient with systemic lupus erythematosus underwent irrigation and debridement for periprosthetic joint infection. Survivorship free of reoperation for any reason was 92.4% (95% confidence interval, 82.4% to 100%) at 13 years.

CONCLUSIONS

The long-term results and survivorship of Delta CoC THA in patients <30 years old were favorable.

LEVEL OF EVIDENCE

Therapeutic Level II. See Instructions for Authors for a complete description of levels of evidence.

Achieving Precise Cup Positioning in Direct Anterior Total Hip Arthroplasty: A Narrative Review

Malpositioned implants in total hip arthroplasty are associated with impingement, increased wear, and dislocations, thus precise cup positioning is crucial. However, significant deviations between targeted and actually achieved cup positions have been found even in patients operated by experienced surgeons. When aiming for higher accuracy, various methods based on freehand positioning lead by anatomic landmarks, C-arm fluoroscopy, imageless navigation, or robotic-assisted-surgery have been described. There is a constant development of new products aiming to simplify and improve intraoperative guidance. Both the literature and expert opinions on this topic are often quite controversial. This article aims to give an overview of the different methods and systems with their specific advantages and potential pitfalls while also taking a look into the future of cup positioning in anterior hip replacements.

A 10- to 12-year follow-up study of delta ceramic-on-ceramic total hip arthroplasty

BACKGROUND

We previously reported five-to-seven-year results of total hip arthroplasty (THA) with the use of delta ceramic-on-ceramic (CoC) bearing. We conducted an extension study with a CT scan at a minimum of 10 years after surgery.

METHODS

From March 2009 to March 2011, 273 patients (310 hips) received cementless THA with delta CoC bearing, porous-coated cup and hydroxyapatite-coated stem. In this extended study, 252 patients (144 men and 108 women) (288 hips) with a mean age of 49.7 years (16-83) at surgery were followed for a mean of 10.4 years (10-12) with CT scans in 133 hips (46.2%, 133/288). Clinical and radiographic evaluations were made at each follow-up and Kaplan-Meier survival analysis was performed with revision and reoperation as endpoints.

RESULTS

There were no more ceramic fractures. Compared to mid-term results, the incidence of squeaking and RLLs increased to 3.1% (9/288) and 19.4% (56/288), respectively. The RLL progressed to focal osteolysis in 3 hips (5.4%, 3/56). No hip had detectable wear or prosthetic loosening. Two hips were reoperated due to periprosthetic joint infection and periprosthetic femoral fracture in each. The survivorship decreased to 98.3% (96.7-99.9%) at 12 years.

CONCLUSION

During the extended follow-up, no additional ceramic fracture occurred, and the incidence of squeak increased by 0.7%. The long-term survivorship of Delta CoC THA was encouraging. However, focal osteolysis occurred around the hydroxyapatite-coated stem in 1% (3/288).

LEVEL OF EVIDENCE

II (Prospective cohort study).

Anterior pelvic plane estimation for total hip arthroplasty using a joint ultrasound and statistical shape model based approach

Orienting properly the prosthetic cup in total hip arthroplasty is key to ensure the postoperative stability. Several navigation solutions have been developed to assist surgeons in orienting the cup regarding the anterior pelvic plane (APP), defined by both anterior superior iliac spines (ASIS) and the pubic symphysis. However acquiring the APP when the patient is ready for surgery, i.e., mainly in lateral decubitus, is difficult due to the contralateral ASIS being against the operating table. We propose a method to determine the APP from both (1) alternative anatomical landmarks which are easy to acquire with a navigated ultrasound probe and (2) a Statistical Shape Model (SSM) of the pelvis. After creating a pelvic SSM from 40 data, a SSM-based morphometric analysis has been carried out to identify the best anatomical landmarks allowing the easy determination of the APP. The proposed method has then been assessed with both in silico and in vivo experiments on respectively forty synthetic data, and five healthy volunteers. The in silico experiment shows the feasibility to determine the APP with an average error of 4.7^∘ by only acquiring the iliac crest, the anterior superior iliac spine, the anterior inferior iliac spine, and the pubic symphysis. The average in vivo error using the ultrasound modality was 7.3^∘ with an estimated impact on both the cup anteversion and inclination of 4.0^∘ and 1.7^∘ respectively. The proposed method shows promising results that could allow the determination of the APP in lateral decubitus with a clinically acceptable impact on the computation of the cup orientation.

Acetabular Retroversion: Dysplasia in Disguise that Leads to Early Arthritis of the Hip

We aimed to assess the prevalence of acetabular retroversion (AR) in patients undergoing total hip replacement (THA) based on age. We retrospectively compared preoperative anteroposterior pelvic radiographs of patients younger than 40 years of age who underwent THA with the age- and body mass index-matched control of 40 years and older patients. Retroversion was determined based on the presence of cross-over sign, ischial spine sign, posterior wall sign, and elephant's ear sign with data stratified based on presence of dysplasia.

Improved accuracy and fewer outliers with a novel CT-free robotic THA system in matched-pair analysis with manual THA

Accurate component orientation and restoration of hip biomechanics remains a continuing challenge in total hip arthroplasty (THA). The goal of this study was to analyze the accuracy/reproducibility of a novel CT-free and pin-less robotic-assisted THA (RA-THA) platform compared to manual THA (mTHA). This matched-pair cadaveric study compared this RA-THA system to mTHA (n = 33/arm), both using the assistance of fluoroscopic imaging, in a group of 14 high-volume arthroplasty surgeons. In both groups, surgeons were asked to aim for 40°/15° for cup inclination/version, and 0 mm of leg length discrepancy (LLD). A validated and accurate method using radio-opaque markers measured cup inclination/version and LLD. The accuracy and reproducibility (fewer outliers) of cup inclination was significantly improved in the robotic group (1.8° ± 1.3° vs 6.4° ± 4.9°, respectively, robotic vs manual; p < 0.001), with no significant difference between groups for version. The reproducibility of LLD was significantly improved in the robotic group (p = 0.003). For all parameters studied, the robotic group had an improved accuracy and lower variance (fewer outliers). The percentage of cases within the more restrictive Callanan safe zone was 100% for RA-THA vs 73% for mTHA (p = 0.002). The CT-free RA-THA platform, using only fluoroscopic imaging, demonstrated more accurate acetabular cup positioning, when compared to the mTHA procedures performed by high-volume hip surgeons (naive to this RA-THA platform), with respect to cup inclination and placement within the Lewinnek/Callanan safe zones. Future study must incorporate economic factors, lower volume surgeons, clinical and patient-centric outcomes, and other radiographic parameters in controlled studies in large sample sizes.

Orthopedic Surgeons' Accuracy When Orienting an Acetabular Cup. A Comparison with Untrained Individuals

Background and Objectives: Previous studies demonstrated a huge variability among surgeons when it comes to reproducing the position of an acetabular cup in total hip arthroplasty. Our main objective is to determine if orthopedic surgeons can replicate a given orientation on a pelvic model better than untrained individuals. Our secondary objective is to determine if experience has any influence on their ability for this task. Materials and Methods: A group of specialist orthopedic hip surgeons and a group of volunteers with no medical training were asked to reproduce three given (randomly generated) acetabular cup orientations (inclination and anteversion) on a pelvic model. Error was measured by means of a hip navigation system and comparisons between groups were made using the appropriate statistical methods. Results: The study included 107 individuals, 36 orthopedic surgeons and 71 untrained volunteers. The mean error among surgeons was slightly greater as regards both inclination (7.84 ± 5.53 vs. 6.70 ± 4.03) and anteversion (5.85 ± 4.52 vs. 5.48 ± 3.44), although statistical significance was not reached (p = 0.226 and p = 0.639, respectively). Similarly, although surgeons with more than 100 procedures a year obtained better results than those with less surgical experience (8.01 vs. 7.67 degrees of error in inclination and 5.83 vs. 5.87 in anteversion), this difference was not statistically significant, either (p = 0.852 and p = 0.981). Conclusions: No differences were found in the average error made by orthopedic surgeons and untrained individuals. Furthermore, the surgeons' cup orientation accuracy was not seen to improve significantly with experience.

The 2021 Association Research Circulation Osseous Classification for Early-Stage Osteonecrosis of the Femoral Head to Computed Tomography-Based Study

BACKGROUND

The Association Research Circulation Osseous developed a novel classification for early-stage (precollapse) osteonecrosis of the femoral head (ONFH). We hypothesized that the novel classification is more reliable and valid when compared to previous 3 classifications: Steinberg, modified Kerboul, and Japanese Investigation Committee classifications.

METHODS

In the novel classification, necrotic lesions were classified into 3 types: type 1 is a small lesion, where the lateral necrotic margin is medial to the femoral head apex; type 2 is a medium-sized lesion, with the lateral necrotic margin being between the femoral head apex and the lateral acetabular edge; and type 3 is a large lesion, which extends outside the lateral acetabular edge. In a derivation cohort of 40 early-stage osteonecrotic hips based on computed tomography imaging, reliabilities were evaluated using kappa coefficients, and validities to predict future femoral head collapse by chi-squared tests and receiver operating characteristic curve analyses. The predictability for future collapse was also evaluated in a validation cohort of 104 early-stage ONFH.

RESULTS

In the derivation cohort, interobserver reliability (k = 0.545) and intraobserver agreement (63%-100%) of the novel method were higher than the other 3 classifications. The novel classification system was best able to predict future collapse (P < .05) and had the best discrimination between non-progressors and progressors in both the derivation cohort (area under the curve = 0.692 [0.522-0.863], P < .05) and the validation cohort (area under the curve = 0.742 [0.644-0.841], P = 2.46 × 10^-5).

CONCLUSION

This novel classification is a highly reliable and valid method of those examined. Association Research Circulation Osseous recommends using this method as a unified classification for early-stage ONFH.

LEVEL OF EVIDENCE

Level III, diagnostic study.

Cup placement in primary total hip arthroplasty: how to get it right without navigation or robotics

Acetabular component orientation and position are important factors in the short- and long-term outcomes of total hip arthroplasty.

Different definitions of inclination and anteversion are used in the orthopaedic literature and surgeons should be aware of these differences and understand their relationships.

There is no universal safe zone.

Preoperative planning should be used to determine the optimum position and orientation of the cup and assess spinopelvic characteristics to adjust cup orientation accordingly.

A peripheral reaming technique leads to a more accurate restoration of the centre of rotation with less variability compared with a standard reaming technique.

Several intraoperative landmarks can be used to control the version of the cup, the most commonly used and studied is the transverse acetabular ligament.

The use of an inclinometer reduces the variability associated with the use of freehand or mechanical alignment guides.

Third-Generation Ceramic-on-Ceramic Total Hip Arthroplasty in Patients with Osteonecrosis of the Femoral Head: A 10- to 16-year Follow-up Study

BACKGROUND

Long-term follow-up results of ceramic-on-ceramic (COC) total hip arthroplasty (THA), specifically, in patients with osteonecrosis of the femoral head (ONFH) are unknown. We evaluated (1) clinical results and radiological outcomes, (2) ceramic-related complications: noise and ceramic fracture, (3) osteolysis, and (4) survivorship after alumina COC THA in ONFH patients with longer than 10-year follow-up.

METHODS

From May 2003 to June 2009, 325 ONFH patients (403 hips) underwent primary THAs at our department. Among them, 231 patients (293 THAs) were followed for 10 to 16 (mean, 12.9) years. There were 148 men and 83 women, their mean age at the time of THA was 47.2 years, and their mean body index was 24.0 kg/m2. The postoperative CT scans were done in 160 hips.

RESULTS

Grinding sensation or squeak was noted in 6.8% (20/293), ceramic head fracture occurred in 2.4% (7/293) and acetabular osteolysis developed in 0.7% (2/293). All 7 ceramic fractures occurred in 28-mm short-neck heads. There was no detectable wear or prosthetic loosening, and the 16-year survivorship was 96.0% (95% confidence interval; 93.8% to 98.2%). The mean Harris hip score was 91.7 (range, 84 to 100) points at the final follow-up.

CONCLUSIONS

The 10- to 16-year results of alumina COC THAs were encouraging with an excellent survivorship. However, ceramic fracture and noise still remain matters of concern. We recommend not to use 28-mm short-neck ceramic head to avoid ceramic head fractures.

LEVEL OF EVIDENCE

III.

Cementless Hip Arthroplasty in Patients with Subchondral Insufficiency Fracture of the Femoral Head

BACKGROUND

Subchondral insufficiency fracture of the femoral head (SIFFH) occurs in elderly patients and might be confused with osteonecrosis of the femoral head (ONFH). Subchondral insufficiency fracture of the femoral head is an insufficiency fracture at the dome of the femoral head and has been known to be associated with osteoporosis, hip dysplasia, and posterior pelvic tilt. This study's aims were to evaluate (1) surgical complications, (2) radiological changes, (3) clinical results, and (4) survivorship of THA in patients with SIFFH.

METHODS

From November 2010 to June 2017, 21 patients (23 hips); 5 men (5 hips) and 16 women (18 hips) underwent cementless THA due to SIFFH at our institution. Their mean age was 71.9 years (range, 57 to 86) at the time of surgery, and mean T-score was -2.2 (range, -4.2 to 0.2). The mean lateral center-edge angle, abduction, and anteversion of the acetabulum were 29.9° (range, 14.8° to 47.5°), 38.5° (range, 31° to 45°), and 20.0° (range, 12° to 25°), respectively. The mean pelvic incidence, lumbar kyphotic angle and posterior pelvic tilt were 56.4° (range, 39° to 79°), 14.7° (range, -34° to 43°), and 13.0° (range, 3° to 34°), respectively.

RESULTS

An intraoperative calcar crack occurred in 1 hip. The mean anteversion and abduction of cup were 29.0° (range, 17° to 43°) and 43.3° (range, 37° to 50°), respectively. One patient sustained a traumatic posterior hip dislocation 2 weeks after the procedure, and was treated with open reduction. At a mean follow-up of 35.4 months (range, 24 to 79 months), no hip had prosthetic loosening or focal osteolysis. At the latest follow-up, the mean modified Harris hip score was 79.1 (range, 60 to 100) points, and mean UCLA activity score was 4.2 (range, 2 to 7) points. The survivorship was 95.7% (95% CI, 94.9% to 100%) at 6 years.

CONCLUSIONS

Cementless THA is a favorable treatment option for SIFFH in elderly patients.

LEVEL OF EVIDENCE

3.

High Risk of Neck-liner Impingement and Notching Observed with Thick Femoral Neck Implants in Ceramic-on-ceramic THA

BACKGROUND

Recently, impingement between the femoral stem and ceramic liner, which appears as a notch in the stem neck on radiographs, has emerged as a new complication. However, the proportion of impingement, potential risk factors, and related complications are poorly elucidated.

QUESTION/PURPOSES

In patients who underwent ceramic-on-ceramic (CoC) THA and had at least 10 years of follow-up, we asked: (1) What proportion had radiographic evidence of stem neck-ceramic liner impingement (notching of the stem), and what implant design, implantation factors, or complications such as ceramic fracture or metallosis are associated with impingement? (2) How common are the complications of noise and ceramic fracture? (3) What are the radiologic changes (including fixation of femoral and acetabular components, osteolysis, and heterotopic ossification) and clinical outcomes as determined by the modified Harris hip score (mHHS) for this cohort? (4) What is the survivorship with implant revision as the endpoint and with reoperation for any reason as the endpoint after CoC THA using a thick-neck stem design?

METHODS

Between May 2003 and April 2010, 643 patients underwent primary THA at a tertiary referral hospital. After excluding patients with metal-on-polyethylene and with ceramic-on-polyethylene implants, 621 patients were considered eligible for this study. All patients received the same hemispherical titanium cup, a standard-length tapered titanium stem, and a CoC bearing. Of those, 19% (115) were lost to follow-up before 10 years, and 8% (50) were excluded because they died before the minimum follow-up duration of 10 years, leaving 73% (456) for analysis. Patients had a mean age of 50 ± 14 years and were followed for a median (range) of 13 years (10 to 17). The mean cup abduction was 38° ± 5°, and the mean cup anteversion was 26° ± 7°. To determine the proportion of patients with the neck-liner impingement, we analyzed the plain radiographs of every patient during follow-up to detect notches around the stem. The detection of stem neck notches on the radiographs was reliable (intraobserver reliability: κ = 0.963; p < 0.001 and interobserver reliability: κ = 0.975; p < 0.001). To evaluate factors related to notching, we compared the possible confounding factors including gender, age, BMI, implant position, neck length, and head diameter. Complications such as ceramic fracture, noise, dislocation, and periprosthetic joint infection were recorded. Noise was evaluated via interview and with the Hip Noise Assessment Questionnaire, which assessed the noise qualitatively. For clinical outcome, we assessed the mHHS, which includes pain and function scales (0 [worst] to 100 [best]), every visit. Tilting of at least 4° or migration of at least 4 mm was the criteria for cup loosening; subsidence more than 3 mm, any change in position, or a continuous radiolucent line greater than 2 mm was the criteria for stem loosening. To evaluate osteolysis, we performed CT scans in 57% (262 of 456) of patients. Kaplan-Meier survivorship analysis was performed using the endpoints of survivorship free from implant revision and survivorship free from reoperation for any cause.

RESULTS

The proportion of stem neck notching was 11% (49 of 456). There were no differences in cup abduction and anteversion between hips with notches and those without notches. Notched hips were more likely to have 28-mm than 32-mm heads (90% [44 of 49] versus 70% [285 of 407]; odds ratio 3.77 [95% CI 1.46 to 9.73]; p = 0.004). None of the 49 notched hips had a ceramic head or liner fracture or evidence of metallosis. A ceramic head fracture was reported in 2% (9 of 456); all fractures occurred in 28-mm short neck heads. A ceramic liner fracture occurred in 0.2% (1 of 456), and noise was noted in 6% (27 of 456). Acetabular osteolysis developed in 2% (7 of 456). The mHHS was 91 ± 12 points at the final follow-up. The survivorship free from implant revision was 97% (95% CI 96% to 99%), and the survivorship free from reoperation for any cause was 96% (95% CI 95% to 98%) at 13 years.

CONCLUSION

The proportion of stems with neck-ceramic liner impingement and ceramic component fracture were unacceptably high after the use of a thick-neck stem design, especially when a 28-mm head was used. We have discontinued the use of this stem design and we recommend that such stems should not be used when CoC bearings are used. As these findings might be generalized to other bearing couples, further studies focused on polyethylene liner wear and local metallosis due to thick stem neck are warranted.

LEVEL OF EVIDENCE

Level III, therapeutic study.

Smartphone Application Helps Improve the Accuracy of Cup Placement by Young, Less-Experienced Surgeons during Primary Total Hip Arthroplasty

BACKGROUND

Dislocation after total hip arthroplasty (THA) partly under the surgeon's control, by appropriate placement of the components. We aimed in this study to determine the accuracy of using intra-operative smartphone applications (Apps) to place the acetabular cup within the safe abduction angle by less experienced surgeons during THA surgery when compared to the conventional freehand technique for cup placement.

METHODS

Sixty primary THAs were performed, 30 using the conventional freehand technique (control group) and 30 using the smartphone app technique (study group) to determine the acetabular cup abduction angle by the same young surgeon with less than one year of experience. Postoperative mean cup abduction angle, mean cup anteversion angle, and the percentage of cups within the safe abduction zone as measured on radiographs were compared between the two groups.

RESULTS

In the study group, the mean cup abduction angle was significantly lower (P=0.0008), and the acetabular cup was placed within the safe zone in a significantly higher (P<0.001) percentage of patients (93% vs 63%) when compared to the control group. However, there was no significant difference (P=0.40) between the two groups when the mean cup anteversion angle was compared.

CONCLUSION

The smartphone app technique may help achieve an accurate acetabular cup abduction angle and a higher percentage of cups placed within the safe zone of abduction by a less experienced surgeon when compared to the conventional freehand technique. Using tools such as the smartphone app to measure the acetabular cup position can reduce intraoperative errors by young and less experienced surgeons during THA surgery.

Is Restoration of Hip Center Mandatory for Total Hip Arthroplasty of Protrusio Acetabuli?

Purpose

While initial fixation using a press-fit of the acetabular cup is critical for the durability of the component, restoration of the hip center is regarded as an attributable factor for implant survival and successful outcome. In protrusio acetabuli (PA), obtaining both restoration of the hip center and the press-fit of the acetabular cup simultaneously might be difficult during total hip arthroplasty (THA). We tested the hypothesis that use of a medialized cup, if press-fitted, will not result in compromise of the implant stability and outcome after cementless THA of PA.

Materials and Methods

A total of 26 cementless THAs of 22 patients with PA were reviewed. During THA, press-fit of the cup was prioritized rather than hip center restoration. A press-fit was obtained in 24 hips. A press-fit could not be obtained in the two remaining hips; therefore, reinforcement acetabular components were used. Restoration of the hip center was achieved in 17 cups; 15 primary cups and two reinforcement components; it was medialized in nine cups. Implant stability and modified Harris hip score (mHHS) between the two groups were compared at a mean follow-up of 5.1 years (range, 2-16 years).

Results

Twenty-six cups; 17 restored cups and nine medialized press-fitted cups, remained stable at the latest follow-up. A similar final mHHS was observed between the restored group and the medialized group (83.6±12.1 vs 83.8±10.4, P=0.786).

Conclusion

Implant stability and favorable results were obtained by press-fitted cups, irrespective of hip center restoration. THA in PA patients showed promising clinical and radiological results.

Distribution and outliers of anteversion of short-length cementless stem

INTRODUCTION

Inadequate stem version might lead to impingement and instability after cementless total hip arthroplasty (THA). We evaluated (1) the distribution of short-stem anteversion, (2) the proportion of stems with an anteversion less than 5° or larger than 25°, (3) combined cup and stem anteversion, and (4) dislocation rate.

MATERIALS AND METHODS

We evaluated the native femoral anteversion and stem anteversion in 340 patients (340 THAs): 144 men and 196 women. Their mean age was 56.2 (22-87) years and mean body mass index was 25.1 (15.2-40.7) kg/m². The femoral neck anteversion was measured on pre-operative CT scan and the stem anteversion was obtained during the operation. The safe zone of the stem anteversion was defined as 5 to 25°.

RESULTS

The femoral neck anteversion ranged from -15 to 61° (mean, 15.0°; SD, ±10.6°). The stem anteversion ranged -7 to 50° (mean, 15.7°; SD, ±9.5°). It was optimal (5-25°) in 71.2% (242/340), insufficient (<5°) in 13.3% (45/340), and excessive (>25°) in 15.6% (53/340). The stem anteversion had a medium correlation with the femoral neck anteversion (correlation coefficient = 0.449). The combined anteversion was 42.0° (range, 35.2-52.3°; SD, ±2.8°). During two to four year follow-up, no hip dislocated.

CONCLUSIONS

Short-length stem had a great variability in the anteversion and considerable portion (28.9%, 98/340) of stems had an anteversion outside the safe zone. Surgeons should be aware of this variability of stem anteversion to compensate for abnormal stem anteversion, which might lead to impingement and instability after THA.

Improved accuracy and fewer outliers with a novel CT-free robotic THA system in matched-pair analysis with manual THA

Accurate component orientation and restoration of hip biomechanics remains a continuing challenge in total hip arthroplasty (THA). The goal of this study was to analyze the accuracy/reproducibility of a novel CT-free and pin-less robotic-assisted THA (RA-THA) platform compared to manual THA (mTHA). This matched-pair cadaveric study compared this RA-THA system to mTHA (n = 33/arm), both using the assistance of fluoroscopic imaging, in a group of 14 high-volume arthroplasty surgeons. In both groups, surgeons were asked to aim for 40°/15° for cup inclination/version, and 0 mm of leg length discrepancy (LLD). A validated and accurate method using radio-opaque markers measured cup inclination/version and LLD. The accuracy and reproducibility (fewer outliers) of cup inclination was significantly improved in the robotic group (1.8° ± 1.3° vs 6.4° ± 4.9°, respectively, robotic vs manual; p < 0.001), with no significant difference between groups for version. The reproducibility of LLD was significantly improved in the robotic group (p = 0.003). For all parameters studied, the robotic group had an improved accuracy and lower variance (fewer outliers). The percentage of cases within the more restrictive Callanan safe zone was 100% for RA-THA vs 73% for mTHA (p = 0.002). The CT-free RA-THA platform, using only fluoroscopic imaging, demonstrated more accurate acetabular cup positioning, when compared to the mTHA procedures performed by high-volume hip surgeons (naive to this RA-THA platform), with respect to cup inclination and placement within the Lewinnek/Callanan safe zones. Future study must incorporate economic factors, lower volume surgeons, clinical and patient-centric outcomes, and other radiographic parameters in controlled studies in large sample sizes.

Robotic-arm assisted versus manual total hip arthroplasty: Systematic review and meta-analysis of radiographic accuracy

BACKGROUND

We systematically reviewed the radiological outcomes of studies comparing robotic-assisted (RA-THA) and manual total hip arthroplasty (mTHA).

METHODS

The PubMed, Embase, and Cochrane databases were queried from 1994-2021 for articles comparing radiographic outcomes between RA-THA and mTHA cohorts. A meta-analysis was conducted whenever sufficient data was present for common outcomes.

RESULTS

Our analysis included 20 articles reporting on 4140 patients (RA-THA: n = 1228; mTHA: n = 2912). No differences were demonstrated for acetabular inclination or anteversion. However, RA-THA demonstrated higher rates of cup orientation within the Lewinnek and Callanan safe zones, improved femoral stem alignment, and lower global offset difference (GOD) and limb length discrepancy (all p-values <0.05). Superior femoral canal fill and combined offset were seen among RA-THA patients.

CONCLUSION

Our review found that the use of RA-THA yields superior radiographic outcomes compared to mTHA counterparts. This information can inform healthcare systems considering investing in and implementing these technologies.

Measuring Acetabular Version after Total Hip Arthroplasty: A Comparison of Two Radiographic Methods

Objective  The objective of the present work was to compare the measurement of acetabular component version on anteroposterior (AP) and on cross-table radiographs after total hip arthroplasty (THA).

Methods  Radiographs of 60 hips with a primary THA were selected. Version was calculated on the AP radiograph using the Lewinnek method and, on the cross-table, using the Woo and Morrey direct method.

Results  Mean and standard deviation (SD) were different on both radiographs, being 9.7° ± 5.5° on the AP, whereas in the cross-table the measurements were 20.6° ± 8.4° ( p  < 0.001). Minding our aim of 10°, the cross-table measurements were statistically different from it ( p  < 0.001), while the AP measurement did not differ ( p  = 0.716).

Conclusion  The present study showed that the best way to correctly evaluate the acetabular component positioning following a THA is by measuring anteversion and abduction on an AP radiograph after confirming, in a cross-table radiograph, that the component is not retroverted.

Preventing ceramic liner fracture after Delta ceramic-on-ceramic total hip arthroplasty

BACKGROUND

The results of total hip arthroplasty (THA) with use of Delta ceramic articulation were successful at medium term follow-up. The use of this newest ceramic has markedly reduced the incidence of ceramic head fractures, but not the incidence of ceramic liner fractures. We tested a hypothesis that the ceramic fractures are prevented by use of a metal shell with 18° inner taper angle and a stem design with a reduced neck geometry.

METHODS

We conducted a prospective multicenter study of cementless THA with use of 32/36-mm Delta ceramic bearing, Exceed ABT metal shell and Taperloc stem. We evaluated ceramic fracture, noise, clinical results, radiological changes and survival rate at a minimum of 5-year follow-up.

RESULTS

From April 2010 to February 2012, 246 patients (274 THAs) were enrolled. Among them, 224 patients (130 men and 94 women, 250 hips) were followed-up for 5-8 years (mean 6.0 years). Ceramic malseating or fracture did not occur in any patient. Eight patients (8 hips, 3.2%) reported noise. Mean Harris hip score was 84 points at the latest follow-up. All acetabular and femoral components had bone-ingrown stability. Two hips were revised due to recurrent dislocation and periprosthetic fracture. The survival rate was 99.6% at 8 years postoperatively.

CONCLUSION

Ceramic fractures can be prevented by a use of (1) 32/36-mm Delta ceramic bearing, (2) metal shell with 18° taper angle, and (2) stem with a reduced neck geometry. However, noise remains a concern of the Delta ceramic bearing.

LEVEL OF EVIDENCE

Therapeutic level II.

No Clinically Important Differences in Thigh Pain or Bone Loss Between Short Stems and Conventional-length Stems in THA: A Randomized Clinical Trial

BACKGROUND

Short-length stems were developed to reduce bone loss of the proximal femur and potentially decrease the incidence of thigh pain after cementless THA. However, it remains unknown whether short stems indeed reduce bone loss or the frequency of thigh pain.

QUESTIONS/PURPOSES

Is there a difference between short- and standard-length stems in terms of: (1) the frequency or severity of thigh pain, (2) modified Harris hip scores, (3) implant loosening, or (4) bone mineral density as measured by dual-energy x-ray absorptiometry?

METHODS

Between March 2013 and January 2014, three surgeons performed 205 primary THAs. To be eligible, patients needed to be at least 20 years of age, have not undergone previous history of hip surgery, and have no metabolic bone disease. A total of 100 patients were randomized to receive THA either with a short stem (n = 56) or with a standard-length stem (n = 44). Both stems were proximally coated, tapered, cementless stems. Compared with standard stems, short stems typically were 30- to 35-mm shorter. A total of 73% (41 of 56) and 77% (34 of 44) of those groups, respectively, were accounted for at a minimum of 5 years and were analyzed. The presence of thigh pain during activity was evaluated using a 10-point VAS, and the modified Harris hip score was calculated by research assistants who were blinded to the treatment groups. Plain radiographs were taken at 6 weeks, 6 months, and 12 months postoperatively, and every 1 year thereafter; loosening was defined as subsidence > 3 mm or a position change > 3° on serial radiographs. Radiological assessment was performed by two researchers who did not participate in the surgery and follow-up evaluations. Bone mineral density of the proximal femur was measured using dual-energy x-ray absorptiometry at 4 days, 1 year, 2 years, and 5 years postoperatively. The primary endpoint of our study was the incidence of thigh pain during 5-year follow-up. Our study was powered at 80% to detect a 10% difference in the proportion of patients reporting thigh pain at the level of 0.05.

RESULTS

With the numbers available, we found no difference between the groups in the proportion of patients with thigh pain; 16% (9 of 56) of patients in the short-stem group and 14% (6 of 44) of patients in the standard-stem group experienced thigh pain during the follow-up period (p = 0.79). In all patients, the pain was mild or moderate (VAS score of 4 or 6 points). Among the 15 available patients who reported thigh pain, there was no difference between the implant groups in mean severity of thigh pain (4.3 ± 0.8 versus 4.2 ± 0.7; p = 0.78). There were no between-group differences in the short versus standard-length stem groups in terms of mean modified Harris hip score by 5 years after surgery (89 ± 13 versus 95 ± 7 points; p = 0.06). No implant was loose and no hip underwent revision in either group. Patients in the short-stem group showed a slightly smaller decrease in bone mineral density in Gruen Zones 2, 3, and 5 than those in the standard-stem group did; the magnitude of the difference seems unlikely to be clinically important.

CONCLUSION

We found no clinically important differences (and few differences overall) between short and standard-length THA stems 5 years after surgery in a randomized trial. Consequently, we recommend that clinicians use standard-length stems in general practice because standard-length stems have a much longer published track record in other studies, and short stems can expose patients to the uncertainty associated with novelty, without any apparent offsetting benefit.

LEVEL OF EVIDENCE

Level I, therapeutic study.

Targeting the safe zones for cup position without fluoroscopic guidance in total hip arthroplasty: does the surgical approach affect the outcomes?

BACKGROUND

Proper acetabular cup positioning is crucial for achieving implant longevity and stability in total hip arthroplasty (THA). One of the elements that may affect the accuracy and precision of the positioning of the cup is the type of surgical approach used. This study compares the accuracy and the precision of conventional free-hand acetabular cup positioning relative to different "safe zones" in two groups of patients operated with THA using two different surgical approach.

METHODS

Retrospective radiological comparative matched-pair controlled study of two groups of patients operated with primary THA: the first group was operated in supine decubitus with a mini-invasive direct anterior approach (DA group), the second group was operated in lateral decubitus with a conventional posterolateral approach (PL group). Cup inclination and anteversion were assessed using the digital planning software TraumaCad. Cup position in the two groups were compared in terms of accuracy and precision.

RESULTS

Forty four patients were enrolled for each group. The DA group showed a less inclined and less anteverted cup compared to the PL group (respectively 38.5 ± 5.2 vs. 49.6 ± 5.6 and 16.2 ± 3.6 vs. 22.9 ± 6.4; p < 0.01). The DA group showed a significantly higher percentage of cups within the "safe zone" in 4 out of 6 reference zones and a significantly lower variance in anteversion (12.96 vs. 40.96, p < .01). There was no difference in the variance for inclination.

CONCLUSIONS

Our study found greater accuracy and precision in the positioning of the cup when surgery was performed through a direct anterior approach compared to the posterolateral approach due to the supine position of the patient which allows greater stability of the pelvis during surgery and makes it easier to target the desired angular references for cup positioning.

Orientation of Transverse Acetabular Ligament With Reference to Anterior Pelvic Plane

Background

Transverse acetabular ligament (TAL) is a 3-dimensional structure which cannot be defined by a single plane. Therefore, we aimed at describing the orientation of different parts of TAL with respect to anterior pelvic plane (APP) and correlate it with gender, body mass index (BMI), and Lewinnek’s safe zone.

Methods

A total of 109 consecutive patients undergoing imageless navigated THA were prospectively studied. Computer navigation was used as the measurement tool. APP was registered for navigation. After excision of osteophytes, a trial component matching the size of unreamed acetabular cavity was aligned with acetabular rim, outer and inner margins, and middle of TAL to record cup orientation with computer tracker.

Results

Ninety-nine patients (41 males and 58 females, mean BMI of 28.8kg/m²) were studied after applying exclusion criteria. Mean acetabular inclination was 55.15°, 53.00°, 47.70°, and 42.60° respectively, for acetabular rim, outer, middle, and inner margins of the TAL. Corresponding mean acetabular anteversion was 6.63°, 7.41°, 11.23° and 14.90°respectively. Overall, 17.17%, 28.28%, 47.47% and 71.71% of cup orientation corresponding to acetabular rim, outer, middle, and inner margin of TAL respectively, were within Lewinnek’s safe zone. No association was established between BMI and acetabular orientation. Males had overall lesser anteversion than females.

Conclusion

We describe orientation of outer, middle, and inner margins of TAL, as reference planes for TAL, in relation to APP. The anteversion differs significantly with gender. A knowledge about these will assist surgeon in component placement during THA, with inner margin of TAL providing the best chance of orientation out of the studied landmarks.

Total Hip Arthroplasty With Trochanteric Ostectomy for Patients With Angular Deformity of the Proximal Femur

BACKGROUND

Total hip arthroplasty (THA) of patients with a proximal femoral deformity is technically demanding. This deformity poses the risk of femoral fracture or perforation; stem malposition; and failed stem fixation. To insert a femoral stem in neutral position with a good fit, we removed the greater trochanter in case of a varus deformity, and the lesser trochanter in case of valgus deformity, while performing THA. We aimed to evaluate stem position, implant stability, clinical results, and radiological changes after THAs using this technique.

METHODS

Fifteen patients (17 hips; 11 varus hips and 6 valgus hips) underwent cementless THA using the trochanteric osteotomy technique in one institution. We evaluated procedure-specific complications: intraoperative femoral fracture, stem malposition, weakness of the abductor power and limp. Modified Harris Hip Score, radiological changes, and the stability of stems were assessed at a mean of 7.1 years of follow-up (range 2.0-15.5).

RESULTS

Femoral fracture occurred during the insertion of the stem in 4 hips. All stems were aligned in neutral position. At the latest follow-up, the mean power of the abductor was 4.3 (range 3-5). Eleven patients had slight limp and 4 patients had moderate limp. All stems had bone-ingrown stability and no stem was revised. The mean modified Harris Hip Score improved from 50 points at the preoperative evaluation to 81 points at the final follow-up.

CONCLUSION

The trochanteric excision enabled neutral insertion of cementless stem in patients with varus/valgus deformity of the proximal femur, and THA using this technique rendered favorable results.

Use of ceramic-on-ceramic bearing in total hip arthroplasty for posttraumatic arthritis of the hip

PURPOSE

We aimed to evaluate (1) the intraoperative parameters, (2) cup position, (3) complications, (4) long-term results, and (5) the survivorship of cementless total hip arthroplastys (THAs) with use of ceramic bearings in patients with a history of acetabular fracture.

METHODS

We compared 57 THAs in patients, who were treated due to previous acetabular fracture (posttraumatic group), with 57 propensity score-matched THAs in patients, who were operated due to femoral head osteonecrosis (osteonecrotic group), at a minimum of 5-year follow-up.

RESULTS

The operation time was longer ( p = 0.008), and the volume of transfusion was larger ( p = 0.0.23) in the posttraumatic group. The cup abduction (39.4° ± 6.0° vs. 39.7°±4.8°) and anteversion (24.7° ± 8.0° vs. 26.7°±7.7°) were similar between the two groups. There was one dislocation in the posttraumatic group. There was no ceramic fracture in either group. One posttraumatic patient underwent excision of exuberant heterotrophic ossification at 3 years after the arthroplasty. The mean University of California, Los Angeles activity improved from 3.6 to 4.9 points in the posttraumatic group and 3.5 to 5.2 points in the osteonecrotic group. All acetabular cups and femoral stems had bone-ingrown stability. When reoperation for any reason was used as the end point, the 10-year survival rate was 98.3% (95% CI: 95.0-100) in the posttraumatic group and 100% in the osteonecrotic group.

CONCLUSION

In our study, posttraumatic patients had longer operation time and larger volume of transfusion than osteonecrotic patients. However, medium-term results and survivorship were similar with those of osteonecrotic patients.

Normal Ischiofemoral Distance and Its Associated Factors: Computed Tomography-Based Study

PURPOSE

The purposes of this study are (1) to measure the ischiofemoral distance (IFD) in nondiseased hips and (2) to reveal patient demographic and anatomical factors associated with IFD.

METHODS

In this retrospective study, we identified patients who had unilateral osteonecrosis of the femoral head on computed tomography (CT) scan from November 2005 to July 2018 and assessed the unaffected contralateral hips of the patients. Among the contralateral hips, we excluded hips with hip pain, incomplete or poor-quality CT image, incomplete medical record, degenerative arthritis of the hip, or previous hip surgery. IFD was measured on the axial CT image, and correlated demographic factors (age, sex, height, weight, and body mass index) and anatomical parameters (neck-shaft angle of the femur and femoral anteversion) with IFD were evaluated.

RESULTS

Five hundred seventeen patients (517 hips) were evaluated. There were 302 men and 215 women, and their mean age was 51.7 years (range 15-83 years). The mean IFD was 33.2 (±9.2) mm in men and 24.3 (±8.9) mm in women (P < .001). Interobserver and intraobserver reliability (intraclass correlation coefficients) were 0.99 (95% confidence interval 0.98-1.0) and 0.98 (95% confidence interval 0.97-0.99), respectively. The mean neck-shaft angle was 129.31° ± 5.04° in males and 129.93° ± 6.29° in females. The mean femoral anteversion was 9.72° ± 7.95° in males and 12.61° ± 8.91° in females. IFD was positively correlated with height (correlation coefficient [r] = 0.464, P < .001) and weight (0.286, P < .001), whereas it was negatively correlated with age (-0.198, P < .001), neck-shaft angle (-0.123, P = .005), and femoral anteversion (-0.346, P < .001). There was no correlation between body mass index and IFD (P = .522). In multivariate regression analysis, IFD was positively associated with height (β = .632), and negatively associated with neck-shaft angle of the femur and femoral anteversion (β = -0.155 and -0.328. respectively).

CONCLUSIONS

In asymptomatic hips, the mean IFD was 33.2 ± 9.2 mm in males and 24.3 ± 8.9 mm in females. The IFD was positively correlated with height and negatively with neck-shaft angle of the femur and femoral anteversion.

LEVEL OF EVIDENCE

Level III, retrospective comparative study.

Which one is more affected by navigation-assisted cup positioning in total hip arthroplasty: Anteversion or inclination? A retrospective matched-pair cohort study in Asian physique

INTRODUCTION

The purpose of this study was to compare acetabular cup positioning using an imageless navigation-assisted total hip arthroplasty (THA) to a case-matched control group using the conventional technique in Asian physique.

METHODS

Case matching controlled study using retrospectively collected data for THAs was done. Matching criteria were gender, age ± 5 years, and body mass index ± 5 kg/m². Thirty patients who had navigation THAs were manually matched to a conventional group of 30 patients. After measuring anteversion and inclination on 3-D CT, final cup anteversion was calculated using the mathematical formula (anteversion = arctan [tan (anatomic anteversion) × sin (inclination)]).

RESULTS

No significant difference was observed between mean inclination ( p = 0.420), anteversion ( p = 0.697), and the mean deviation from 15° for anteversion ( p = 0.649). However, there was a statistical significant difference for mean deviation from 40° for inclination ( p = 0.027). There was a significant difference in the percentage of correctly placed acetabular cup in safe zones with inclination ( p = 0.039).

CONCLUSIONS

Although soft tissue overlying the pubic tubercle interfered with registration of the bony landmark and thereby induced inaccuracy of anteversion angles in the navigation group, the use of imageless navigation-assisted technique increases the placement within the safe zone for inclination and enhances the accuracy and the precision of inclination of the acetabular cup relative to the conventional THA rather than anteversion. This finding may be due to the effect of the patient's physique on the anterior pelvic plane (APP)-based reference system of imageless navigation.

A novel positioner for accurately sitting the acetabular component: a retrospective comparative study

Introduction

In this study, we described a positioner which allows a combination of preoperative plan and intraoperative insertion of the cup to improve the reconstruction of the rotation center of the hip.

Materials and methods

A retrospective study was conducted on 32 consecutive patients (group A) using this positioner and 40 consecutive patients (group B) using conventional method; radiological parameters and clinical measurements before operation and at last follow-up were collected and evaluated.

Results

Group A had a reconstructed center of rotation (COR) that was 0.19 mm closer to the anatomic COR in height (P < 0.005), compared with group B with 3.45 mm vertical dislocation. There were no statistically significant differences in the horizontal displacement between the two groups. The accuracy of cup inclination was 42.14 ± 3.57 in the group A and 38.73 ± 7.65 in the group B (P = 0.015). The accuracy of cup anteversion was 14.82 ± 1.44 in the group A and 13.08 ± 5.95 in the group B (P = 0.082). All cups in the group A were radiologically stable, while one cup in the group B was radiologically unstable and was successfully treated with second-stage revision. Both of the groups obtained a higher mean postoperative Harris Hip Score.

Conclusions

Utilizing this positioner helps to restore the COR position more precisely and provides satisfactory radiological and clinical outcomes in the short term, and more studies are required before its widespread adoption for complicated cases.

The effects of total hip arthroplasty in treating hip bony fusion in young and middle-aged patients with ankylosing spondylitis

Background

This study aims to investigate the curative effects of total hip arthroplasty (THA) in treating hip bony fusion for young and middle-aged patients with ankylosing spondylitis (AS).

Methods

The clinical data of 26 young and middle-aged patients with AS (31 coxae), who were treated with THA and followed-up for more than 3 years in the period between February 1998 and May 2013, were retrospectively analyzed. Among these patients, 22 patients were male (25 coxae) and 4 patients were female (6 coxae). Patients’ age ranged within 19–50 years old, with an average of 31.5 years old. The intervals from arthroplasty to the occurrence of hip joint lesions caused by AS ranged within 2–26 years, with an average of 11.2 years. The average Harris score before the surgery was 19.0 ± 11.5 points.

Results

Femoral proximal cleavage fracture occurred in one coxa during the surgery and was fixed by the steel wire cerclage. Sciatic nerve traction injury occurred in one coxa after the surgery, which recovered after 6 months. Posterior hip dislocation occurred in one coxa and was immediately treated with manual reduction. All patients were followed-up, and follow-up duration ranged within 36–123 months, with an average of 46.5 months. In the last follow-up, the average Harris score was 87.1 ± 13.1 points, total passive range of motion was 215.0 ± 22.0°, and passive range of flexion was 90.8 ± 9.3°. All these indexes significantly increased compared with pretreatment (P < 0.01). A periacetabular radiolucent line occurred in one coxa with a width of < 2 mm, and no femoral radiolucent line was found during follow-ups in any patient. Heterotopic ossification occurred in four coxae.

Conclusion

THA treatment for hip bony fusion caused by AS can achieve satisfactory hip function recovery and excellent prosthesis survival rate.

Incidence, risk factors and prognosis of transient pseudosubluxation after total hip arthroplasty

INTRODUCTION:

Pseudosubluxation is a transient separation of the prosthetic femoral head from the acetabular liner during the anaesthetic period after total hip arthroplasty (THA). However, little is known about the frequency, pathomechanism, risk factors or natural history.

METHODS:

To determine the incidence, direction of the displacement, risk factors and subsequent instability of pseudosubluxation, we evaluated 1099 primary cementless THAs (943 patients), which were performed during 8 years at one institution. Immediately after THA, postoperative radiographs were obtained for all hips. If a subluxation was noted, the operated hip was examined by fluoroscope within 1 hour of the detection and repeat radiographs were taken on the postoperative day 1.

RESULTS:

The pseudosubluxation was identified in 2.6% (28/1059). All of the 28 heads subluxed anteriorly and reduced in flexion-internal rotation. In multivariate analysis: (1) operative decrease of the femoral offset (odds ratio; 1.161 (95% confidence interval [CI]; 1.077-1.251), p = 0.001); and (2) medialisation of acetabular cup (odds ratio; 3.402 (95% CI; 1.482-7.813), p = 0.009) were found as risk factors for pseudosubluxation. None of the 28 hips dislocated during 3- to 8-year follow-up.

CONCLUSIONS:

Our results provide information about the incidence, risk factors and natural history of pseudosubluxation after primary THA. Surgeons should be aware of the risk of pseudosubluxation when performing THA in patients with coxa vara, who have a large femoral offset, and in those with dysplastic or deficient acetabulum, who have a lateral centre of rotation.

What is the tolerated width of periacetabular osteophytes to avoid impingement in cementless THA?: a three-dimensional simulation study

BACKGROUNDS

Impingement is a risk factor for instability and prosthetic failure following total hip arthroplasty (THA). If the periacetabular osteophytes are not removed at surgery, impingement could occur between the osteophytes and the femoral stem following THA. However, excessive removal of the osteophytes could lead to bleeding from the bone. The aim of our study, therefore, was to locate the site of the impingement and to determine the width of tolerable osteophytes, which does not induce impingement during activities of daily living (ADL), using a three-dimensional simulation.

METHODS

On 35 hip models, virtual THA was performed. The acetabular cups were positioned at 45° abduction and 20° anteversion, and the anteversion of femoral stems was 15°. Circular osteophytes with a 30-mm rim were built around the acetabular cup. Fourteen ADL motions were simulated, and the osteophytes were removed until there was no impingement. A clock face was used to map the location and the width of tolerable osteophytes.

RESULTS

The impingement mainly occurred in antero-superior and posterior portions around the acetabular cup. Only 4.2-6.2-mm osteophytes were tolerable at the antero-superior portion (12-3 o'clock) and 6.3-7.2-mm osteophytes at the posterior portion (8-10 o'clock) following a total hip arthroplasty. In antero-inferior and postero-superior portions, over-20-mm osteophytes did not induce any impingement.

CONCLUSION

Osteophytes in the antero-superior and posterior portion of the acetabulum should be excised during a THA to avoid impingement of the femur-stem construct on the acetabular osteophytes during ADLs.

Hip malformation is a very common finding in young patients scheduled for total hip arthroplasty

INTRODUCTION

In Denmark, 20% of all registered total hip arthroplasties (THA) from 1995 to 2014 has been patients younger than 60 years with primary idiopathic osteoarthritis (OA). It is speculated that hip malformations may be a major contributor to early OA development. It has been shown that hip malformation may compromise implant position and, therefore, identifying and knowing the incidence of malformations is important. Our aim was to assess the prevalence and type of hip malformations in a cohort of younger patients undergoing THA.

MATERIALS AND METHODS

In this prospective two center cohort study, 95 consecutive patients (106 hips) met the inclusion criteria. One observer performed radiographic measurements for malformations and radiographic OA. Inter- and intraobserver variability was assessed.

RESULTS

From 95 patients (male n = 52 and female n = 43) age ranged from 35 to 59 years and prevalences of hip malformations were; CAM-deformity 50.9 and 25.5%, coxa profunda 33 and 27.4%, acetabular retroversion 33 and 29.2%, and acetabular dysplasia 10.4 and 3.8%. All patients showed minimum of one malformation. Prevalences of Tönnis grade 0-1 were 22.6% and 2-3 were 77.4%.

CONCLUSION

All patients showed malformations, especially high prevalences were found for CAM-deformity, coxa profunda and acetabular retroversion. Identifying these malformations is fairly simple and recognizing the high prevalence may help surgeons avoid pitfalls during implant positioning in THA surgery. Further, focus on hip malformations may facilitate correct referral to joint-preserving surgery before OA develops.

Mid-term results of the BIOLOX delta ceramic-on-ceramic total hip arthroplasty

Aims

We conducted a prospective study of a delta ceramic total hip arthroplasty (THA) to determine the rate of ceramic fracture, to characterise post-operative noise, and to evaluate the mid-term results and survivorship.

Patients and Methods

Between March 2009 and March 2011, 274 patients (310 hips) underwent cementless THA using a delta ceramic femoral head and liner. At each follow-up, clinical and radiological outcomes were recorded. A Kaplan-Meier analysis was undertaken to estimate survival.

Results

Four patients (four hips) died and 18 patients (20 hips) were lost to follow-up within five years. The remaining 252 patients (286 hips) were followed for a mean of 66.5 months (60 to 84). There were 144 men (166 hips) and 108 women (120 hips) with a mean age of 49.7 years (16 to 83) at surgery. The mean pre-operative Harris Hip Score of 47.1 points improved to 93.8 points at final follow-up. Six patients reported squeaking in seven hips; however, none were audible. Radiolucent lines involving Gruen zones one and/or seven were seen in 52 hips (18.2%). No hip had detectable wear, focal osteolysis or signs of loosening. One hip was revised because of fracture of the ceramic liner, which occurred due to an undetected malseating of the ceramic liner at the time of surgery. One hip was revised for a periprosthetic fracture of the femur, and one hip was treated for periprosthetic joint infection. The six-year survivorship with re-operation for any reason as the endpoint was 99.0% (95% confidence interval 97.8% to 100%).

Discussion

The rate of delta ceramic fracture was 0.3% (one of 286). While ceramic head fracture was dominant in previous ceramic-on-ceramic THA, fracture of the delta ceramic liner due to malseating is a concern. Cite this article: Bone Joint J 2017;99-B:741–8.

Rigid Patient Positioning is Unreliable in Total Hip Arthroplasty

BACKGROUND

To our knowledge, no study has assessed the ability of rigid patient positioning devices to afford arthroplasty surgeons with ideal acetabular orientation throughout surgery. The purpose of this study is to use robotic arm-assisted computer navigation to assess the reliability of pelvic position in total hip arthroplasty performed on patients positioned with rigid positioning devices.

METHODS

A prospective cohort of 100 hips (94 patients) underwent robotic-guided total hip arthroplasty in the lateral decubitus position from the posterior approach, 77 stabilized by universal lateral positioner, and 23 by peg board. Before reaming, computed tomography-templated computer software generated true values of pelvic anteversion and inclination based on the position of the robot arm registered to the patient's preoperative pelvic computed tomography.

RESULTS

Mean alteration in anteversion and inclination values was 1.7° (absolute value, 5.3°; range, -20° to 20°) and 1.6° (absolute value, 2.6°; range, -8° to 10°), respectively. And 22% of anteversion values were altered by >10° and 41% by >5°. There was no difference between hip positioners used (P = .36). Anteversion variability was correlated with body mass index (P = .02).

CONCLUSION

Despite the use of rigid patient positioning devices-a lateral hip positioner or peg board-this study reveals clinically important malposition of the pelvis in many cases, especially with regard to anteversion. These results show a clear need to pay particular attention to anatomic landmarks or computer-assisted techniques to assure accurate acetabular cup positioning. Patient positioning should not be solely trusted.

Total hip arthroplasty using a monobloc cementless femoral stem for patients with childhood Perthes’ disease

Aims

Modular or custom-made femoral components have been preferred for total hip arthroplasty (THA) in patients with a history of Perthes’ disease because of the distortion in the anatomy of the proximal femur. However, it has not been established whether a monobloc cementless stem will fit the distorted proximal femur or whether the results of the procedure are satisfactory in this group of patients.

Patients and Methods

We reviewed 68 consecutive patients who had undergone THA for childhood Perthes’ disease between June 2003 and December 2008. There were 35 men and 33 women with a mean age of 48 years (16 to 73) at the time of index arthroplasty. Their mean body mass index was 24.4 (18.3 to 32.9). Of the 68 hips, 32 were classified as Stulberg class III and 36 as class IV. The mean pre-operative shortening of the affected leg was 17.2 mm (5 to 34). The minimum follow-up was five years (mean 8.5 years; 5.2 to 10).

Results

An intra-operative calcar fracture occurred in eight hips (11.8%) and was successfully treated by cerclage wiring. The mean stem version was 14.6° (-2.3 to 30; standard deviation (sd) 7.3). The mean acetabular component abduction was 40.2° (23.7 to 56.0; sd 6.5) and the mean anteversion 28.3° (6.4 to 43.0; sd 7.6), respectively. The mean follow-up was 8.5 years (5.2 to 10). No dislocations occurred and no hips were revised during the course of the study. At final follow-up, the mean Harris Hip Score was 91 points (59 to 100) and the mean University of California, Los Angeles activity score was 3.2 (2 to 8).

Conclusion

Monobloc cementless stems reliably restore the anatomy in Perthes’ disease at THA without the need for custom-made or modular implants. Cite this article: Bone Joint J 2017;99-B:440–444.

Could larger diameter of 4th generation ceramic bearing decrease the rate of dislocation after THA?

BACKGROUND

Fourth generation (Delta) ceramic bearing was developed to reduce dislocation after total hip arthroplasty (THA) by increasing the head diameter. We tested a hypothesis that 32/36 mm Delta ceramic bearing decreases the dislocation rate. We also evaluated ceramic-related complications and early outcome of this thin liner-on-large head ceramic bearing.

METHODS

We performed a prospective study on patients who underwent THA with use of 32/36 mm Delta ceramic bearing. The dislocation rate was compared with the historical dislocation rate of third generation 28 mm ceramic bearing. We also evaluated ceramic fracture, squeak, short-term results and survival. Follow-up period was minimum 2 years.

RESULTS

Between April 2010 and February 2012, we enrolled 250 consecutive patients (278 hips). All patients received cementless prostheses. Four patients (4 hips) who received metal shells ≤ 46 mm and 28 mm heads were excluded. Three patients died and 2 patients were lost within 2 years. The remaining 241 patients (269 hips) were followed for 24-46 months. There were 142 men (161 hips) and 99 women (108 hips) with a mean age of 53.7 years (range, 17-75 years) at the index operation. Dislocation occurred in three hips (1.1%). An old age was a risk factor for dislocation. Ceramic fracture and squeaking did not occur in any patient. Mean Harris hip score was 90.3 points at the latest follow-up. All acetabular and femoral components had bone-ingrowth stability. No hip had detectable wear or osteolysis. The survival was 99.3% in the best case scenario and 97.8% in the worst at 48 months.

CONCLUSIONS

Total hip arthroplasty with use of 32/36 mm Delta ceramic bearing showed lower incidence of hip dislocation compared with 28 mm third generation ceramic bearing. A caution should be paid to prevent a fall in senile patients even though a large head is used. The short-term results of THA with this type of ceramic articulation are encouraging and we did not find any ceramic-related complications.

Acetabular Dysplasia and Surgical Approaches Other Than Direct Anterior Increases Risk for Malpositioning of the Acetabular Component in Total Hip Arthroplasty

BACKGROUND

Persistent acetabular dysplasia (AD) after periacetabular osteotomy has been hypothesized to increase the risk for malpositioning of the acetabular component. In this study, we investigate whether AD is an independent risk factor for cup malpositioning during primary total hip arthroplasty (THA).

METHODS

Patient demographics, surgical approach, presence of AD assessed using the lateral center-edge angle, and acetabular cup positioning determined using Martell Hip Analysis Suite were investigated in 836 primary THA patients enrolled in a prospective multicenter study.

RESULTS

We found that presence of AD, defined as the lateral center-edge angle of <25°, is an independent risk factor for malpositioning of the acetabular component during primary THA. Surgical approach other than direct anterior was also independently associated with malpositioned cups.

CONCLUSIONS

Surgeons should therefore take special care during placement of the acetabular component in patients with AD.

A Kirschner wire as a transverse-axis guide to improve acetabular cup positioning

PURPOSE

To compare cup-positioning accuracy in total hip arthroplasty (THA) with or without use of a Kirschner wire as a transverse-axis guide for pelvic alignment.

METHODS

Records of 18 men and 73 women (mean age, 60 years) who underwent primary THA with (n=49) or without (n=42) use of a Kirschner wire as a transverse-axis guide for pelvic alignment were reviewed. A 2.4-mm Kirschner wire as a transversea-xis guide was inserted to the anterior superior iliac spine and was parallel to a line linking the left and right anterior superior iliac spine. The safe zone for cup positioning was defined as 30º to 50° abduction and 10º to 30º anteversion. Of the 5 operative surgeons, 2 were classified as experienced (total surgical volume >300) and 3 as inexperienced (total surgical volume of <50). The proportion of patients with the cup in the safe zone was compared in patients with or without use of the transverse-axis guide and in experienced and inexperienced surgeons.

RESULTS

For inexperienced surgeons, the use of the transverse-axis guide significantly improved the proportion of patients with the cup in the safe zone from 90% to 100% for abduction, from 50% to 82.4% for anteversion, and from 40% to 82.4% for both. Patients with the cup inside or outside the safe zone were comparable in terms of body height, weight, BMI, subcutaneous fat thickness, incision length, and acetabular cup size.

CONCLUSION

The use of the transverse-axis guide improved the accuracy of cup positioning by inexperienced surgeons.

Accuracy of an adjustable patient-specific guide for acetabular alignment in hip replacement surgery (Optihip)

Implant malalignment in hip arthroplasty increases the risk of revision surgery due to problems such as hip instability, wear, and impingement. Traditional instrumentation lacks accuracy and does not individualize the goal. Computer-assisted surgery (CAS) and patient-specific solutions improve accuracy but add considerably to the cost, amongst other drawbacks. We developed an adjustable mechanical device, called Optihip, which is set to a patient-specific goal preoperatively and is independent of pelvis position intraoperatively. The purpose of the present study was to evaluate Optihip's accuracy ex vivo. Acetabular components were implanted into six cadaveric specimens, 12 hips, by two surgeons, with the device individually adjusted according to preoperative templating on computed tomography (CT) images relative to defined acetabular rim landmarks; options also exist for templating on single or biplanar X-rays. Intraoperatively, the device was positioned on the corresponding anatomical landmarks allowing the insertion of a guide pin, which then defined the desired orientation of the acetabular cup during impaction. Mean absolute difference between the preoperatively planned cup alignment and final acetabular cup orientation, measured from postoperative CT images, was 2.5±1.2° for inclination and 2.5±2.2° for version with maximum values of 4.7° and 6.8°, respectively. Compared with previous in vivo reports, Optihip guided the acetabular cup orientation more accurately than conventional hip arthroplasty, and comparably to CAS or patient-specific systems, while fitting into the normal surgical workflow. Although clinical testing is required to confirm these experimental results, the positive ex vivo accuracy suggests good potential for improving revision rates and patient functional outcome.

Contemporary ceramic total hip arthroplasty in patients with cerebral palsy: does it work?

Background

Adult patients with cerebral palsy (CP), who have advanced degenerative arthritis of the hip, have been treated with resection arthroplasty and arthrodesis. Although total hip arthroplasty (THA) has also been used as one of the alternative options, there are few studies on contemporary bearings used in THA. Therefore, we evaluated the results of the contemporary ceramic-on-ceramic THA in adult patients with CP.

Methods

From January 2005 to December 2007, five adult CP patients (5 hips) underwent THA using contemporary ceramic-on-ceramic bearings. All patients were able to stand or ambulate with intermittent use of assistive devices at home. We retrospectively reviewed the series to determine the results of THA in terms of pain relief, improved function, and durability of prosthesis.

Results

There were 3 men and 2 women with a mean age of 35.9 years. All patients had pain relief without decline in mobility postoperatively. One hip was dislocated, which was treated successfully with closed reduction and an abduction brace for 2 months. There was no ceramic fracture, loosening, or osteolysis during the mean follow-up of 6.8 years (range, 5.8 to 8.3 years).

Conclusions

Cementless THA using contemporary ceramic-on-ceramic bearings is a useful option for the treatment of advanced degenerative arthritis of the hip in ambulatory adults with CP.

Comparison of topical and intravenous tranexamic acid on blood loss and transfusion rates in total hip arthroplasty

The objective of this study was to determine whether topical tranexamic acid (TXA) carried similar hemostatic effect compared with intravenous TXA in total hip arthroplasty (THA). Three hundred and three THA patients were enrolled and randomized into 3 groups: no TXA group, topical and intravenous TXA group. The results showed that the topical and intravenous TXA group had reduced but similar blood transfusion rates (5.88% v. s. 5.94%, P = 0.816). No significant difference was detected in total blood loss between the two TXA groups [(963.4 ± 421.3) ml vs. (958.5 ± 422) ml P = 0.733]. We conclude that topical use of TXA was equally effective and safe compared with intravenous TXA in reducing blood loss and transfusion rate following THA without substantial complications.

Comparison of robotic-assisted and conventional acetabular cup placement in THA: a matched-pair controlled study

BACKGROUND

Improper acetabular component orientation in THA has been associated with increased dislocation rates, component impingement, bearing surface wear, and a greater likelihood of revision. Therefore, any reasonable steps to improve acetabular component orientation should be considered and explored.

QUESTIONS/PURPOSES

We therefore sought to compare THA with a robotic-assisted posterior approach with manual alignment techniques through a posterior approach, using a matched-pair controlled study design, to assess whether the use of the robot made it more likely for the acetabular cup to be positioned in the safe zones described by Lewinnek et al. and Callanan et al.

METHODS

Between September 2008 and September 2012, 160 THAs were performed by the senior surgeon. Sixty-two patients (38.8%) underwent THA using a conventional posterior approach, 69 (43.1%) underwent robotic-assisted THA using the posterior approach, and 29 (18.1%) underwent radiographic-guided anterior-approach THAs. From September 2008 to June 2011, all patients were offered anterior or posterior approaches regardless of BMI and anatomy. Since introduction of the robot in June 2011, all THAs were performed using the robotic technique through the posterior approach, unless a patient specifically requested otherwise. The radiographic cup positioning of the robotic-assisted THAs was compared with a matched-pair control group of conventional THAs performed by the same surgeon through the same posterior approach. The safe zone (inclination, 30°-50°; anteversion, 5°-25°) described by Lewinnek et al. and the modified safe zone (inclination, 30°-45°; anteversion, 5°-25°) of Callanan et al. were used for cup placement assessment. Matching criteria were gender, age ± 5 years, and (BMI) ± 7 units. After exclusions, a total of 50 THAs were included in each group. Strong interobserver and intraobserver correlations were found for all radiographic measurements (r > 0.82; p < 0.001).

RESULTS

One hundred percent (50/50) of the robotic-assisted THAs were within the safe zone described by Lewinnek et al. compared with 80% (40/50) of the conventional THAs (p = 0.001). Ninety-two percent (46/50) of robotic-assisted THAs were within the modified safe zone described by Callanan et al. compared with 62% (31/50) of conventional THAs p (p = 0.001). The odds ratios for an implanted cup out of the safe zones of Lewinnek et al. and Callanan et al. were zero and 0.142, respectively (95% CI, 0.044, 0.457).

CONCLUSIONS

Use of the robot allowed for improvement in placement of the cup in both safe zones, an important parameter that plays a significant role in long-term success of THA. However, whether the radiographic improvements we observed will translate into clinical benefits for patients-such as reductions in component impingement, acetabular wear, and prosthetic dislocations, or in terms of improved longevity-remains unproven.