Exchangeable Femoral Neck (Dual-Modular) THA Prostheses Have Poorer Survivorship Than Other Designs: A Nationwide Cohort of 324,108 Patients

Reasons for malpractice claims after primary total hip arthroplasty in France: Insurance data from 240 claims from 2014 to 2017

INTRODUCTION

Total hip arthroplasty (THA) is one of the most frequent orthopedic surgery procedures, and orthopedic surgeons are among the most frequently accused of malpractice by their patients. Identifying the main reasons for malpractice claims after THA is a prior condition to reducing their frequency. The quality of the preoperative risk information given to the patient by the surgeon is crucial for these purposes. Data specific to THA are sparse in France, and we therefore conducted a retrospective study (1) to determine whether the outcome of medico-legal expert appraisal correlated with the quality and traceability of preoperative information, and (2) to identify the most frequent grounds for complaint after primary THA.

HYPOTHESIS

The quality of patient information partly determines expert appraisal.

MATERIAL AND METHOD

A retrospective study was conducted based on data from the Branchet medical professional insurance agency for malpractice claims following THA over the period 2014-2017, with 240 complete files, for 125 women and 115 men. Data comprised: type of procedure, main grounds of complaint (complications), positive or negative expert appraisal, quality of preoperative patient information, amounts of compensation accorded and fees paid, and the practitioner's liability. We assessed correlations between information quality and liability.

RESULTS

Surgical site infection and neurologic deficit were the two main grounds for malpractice claims. In the 240 files, cases for 106 operations (44.2%) were submitted to arbitration, 95 (39.6%) were brought to court, and 39 (16.2%) were settled out of court. The practitioner was held at least partly liable in 40 files (16.7%). Information to the patient was deemed imperfect or poor for 119 files (49.6%) and good in 121 (50.4%). Mean compensation was €30,940 (range, €0 to €198,100). In 27 of the 40 cases of liability (67.5%), the information to the patient was deemed imperfect or poor. Twenty-six of the 40 cases (65%) were settled out of court. In case of poor information, there was a significant risk for the practitioner to be held liable: 7.5 vs. 25% (p=0.003).

DISCUSSION

The present study listed the main complications underlying malpractice claims after THA: infection, neurologic complications, and limb-length discrepancy. This should enable practitioners to improve patient information so as to reduce the rate of malpractice claims or at least decrease the practitioner's liability, as the study found a correlation between information quality and expert appraisal.

LEVEL OF EVIDENCE

IV; retrospective study.

Dislocation of primary total hip arthroplasty: Analysis of risk factors and preventive options

Total hip arthroplasty (THA) is one of the most successful elective operations in orthopedic surgery for improving pain and functional disability in patients with end-stage joint disease. However, dislocation continues to be a troublesome complication after THA, as it is a leading cause of revision and is associated with substantial social, health, and economic costs. It is a relatively rare, usually early occurrence that depends on both the patients' characteristics and the surgical aspects. The most recent and important finding is the special attention to be given preoperatively to spinopelvic mobility, which is closely related to the incidence of dislocation. Consequently, clinical and radiographic assessment of the lumbar spine is mandatory to identify an altered pelvic tilt that could suggest a different positioning of the cup. Lumbar spinal fusion is currently considered a risk factor for dislocation and revision regardless of whether it is performed prior to or after THA. Surgical options for its treatment and prevention include the use of prostheses with large diameter of femoral head size, dual mobility constructs, constrained liners, and modular neck stems.

Fracture of femoral neck in modular total hip arthroplasty: a systematic review of the literature

BACKGROUND

Modular femoral stems have the advantage of anatomic hip reconstruction by restoring the femoral offset thus minimising the bearing surface wear, implant loosening and dislocation.

AIM

This study aims to investigate the existing literature on modular neck fractures, to identify predisposing factors and guide the decision-making process in the management of these difficult cases.

METHODS

A systematic literature review was conducted until July 2022. PRISMA guidelines were followed, eligibility criteria were set, and methodology assessment of included studies was conducted based on MINORS criteria, size and primary outcome. Data were extracted and analysed thoroughly.

RESULTS

5657 studies were initially screened; the full texts of 124 records were assessed and finally, 32 reports were included. There were 7 clinical studies and 25 case reports. A total of 4825 patients (5204 hips) with a mean age 62.38 years and a mean BMI 29.06 kg/m2 were analysed in the 7 clinical studies. The reported overall weighted revision rate was 0.86%, while the weighted mean modular neck fracture rate was 0.26%. The usual history was sudden experience of hip pain and instability. The average time interval to neck fracture was 4.57 (range 3-4.7) years and a long modular neck was identified in 91.17% of them. Data from case reports showed a mean age and average BMI of 55.85 and 31.63 kg/m2. 82.35% of the patients were male. Necks were fractured after an average time interval of 64.5 ± 8.8 months.

CONCLUSIONS

The incidence of modular neck fracture is significant. The profile of a male, obese patient with a long modular neck increased risk of neck fracture. Microstructural investigation of the retrieved implants demonstrated a higher incidence of fracture line in the base of the neck junction and at its anterolateral distal part. Surgeons should be aware of this complication while using or revising such protheses.

15-year survivorship of a unique dual-modular femoral stem in primary hip arthroplasty

BACKGROUND

Hip offset, version, and length are interdependent femoral variables which determine stability and leg length. Balancing these competing variables remains a core challenge in hip arthroplasty. The potential benefits of modular femoral stems have been overshadowed by higher rates of failure. The objective of this study was to assess the survivorship of a unique dual-modular femoral stem at an average 15-year follow-up period.

METHODS

The records of all patients with osteoarthritis who underwent primary total hip arthroplasty with this device between 2004-2009 were reviewed. There were no exclusions for BMI or other factors. We examined the data with Kaplan-Meier survival analysis. The primary endpoint for survival was mechanical failure of the modular neck-body junction.

RESULTS

The survivorship of this device in 172 subjects was 100% with none experiencing mechanical failure of the modular junction at an average of 15 years. 60 patients died of causes unrelated to their THA and 9 patients were lost to follow-up. There were three early (≤ 12 months) dislocations (1.7%), and seven total dislocations (4.1%). 16 patients underwent reoperations during the follow-up period, none for any complication of the modular junction. Radiographic results showed well-fixed femoral stems in all cases. There were no leg length discrepancies of greater than 10 mm, and 85% were within 5 mm.

CONCLUSION

There were no mechanical failures of the modular junction in any of the subjects over the average 15-year period, demonstrating that this dual-modular design is not associated with increased failure rates. We achieved a 1.7% early dislocation rate and a 4.1% total dislocation rate without any clinically significant leg length discrepancies.

Comparison of single taper and dual taper versions of the same stem design in total hip arthroplasty for primary osteoarthritis

BACKGROUND

In total hip arthroplasty (THA), the outcomes of single taper (ST) and dual taper (DT) versions of the same stem design have been scarcely studied. A registry study comparing ST and DT versions of the same stem design was designed, aiming to assess: (1) the survival rates and the hazard ratios for failure; (2) the survival rates and the hazard ratios for failure using stem-focused endpoints.

MATERIAL AND METHODS

A regional arthroplasty registry was interrogated about stem designs with ST and DT versions in cementless THAs performed for primary osteoarthritis. Only the same cup and ceramic-on-ceramic bearings were included: the DT stems had a titanium-on-titanium modularity. Demographic and implant features were recorded. Survival rates and hazard ratios were evaluated and compared. Stem-focused endpoints were also investigated.

RESULTS

A total of 5359 THAs were included, with three stem designs. The two versions of every stem showed different demographics and implant-related features: ST versions were preferentially implanted in heavier young men. For each stem, the two versions had similar survival rates at 5 years (p = 0.076; p = 0.319; p = 0.616) and similar adjusted hazard ratios for failures (p = 0.084; p = 0.308; p = 0.729). When stem-focused endpoints were adopted, the ST and DT versions of the three stems achieved similar survival rates (p = 0.710; p = 0.784; p = 0.983) and similar adjusted hazard ratios (p = 0.647; p = 0.858; p = 0.787). Three neck breakages occurred (0.0007% of all the modular implants).

CONCLUSIONS

ST and DT versions of the same stem design did not show any differences in terms of survival rates and hazard ratios for failures at 5 years.

LEVEL OF EVIDENCE

IV.

Titanium modular stems in total hip arthroplasty due to developmental dysplasia: a registry comparison with single-taper implants

INTRODUCTION

The routine use of proximal femoral modularity was discouraged in total hip arthroplasties (THAs). However, titanium dual-taper (DT) implants may provide some advantages over single-taper (ST) stems in cases of complex deformity. A registry study comparing ST and DT stems in dysplasia was designed, aiming to assess: (1) survival rates at long-term; (2) reasons for revision; (3) the profile of failed implants.

METHODS

The arthroplasty registry RIPO was investigated for cementless THAs performed for dysplasia since 2000. ST implants were compared to titanium-on-titanium DT stems. Demographics and implant features were collected. Survival rates and reasons for revision were compared. The profile of DT stem failures in dysplasia was defined.

RESULTS

6429 implants were included in the study, 3642 ST and 2787 DT. The demographic and implant features of the 2 cohorts were not comparable. The DT cohort achieved higher survival rates at long-term (93.9% vs. 91.6%, p = 0.018). DT implants showed a higher rate of implant breakage (0.6%, p = 0.011) and a lower rate of aseptic loosening (p = 0.005). There were no differences in terms of revisions for dislocation. No metallosis occurred. There were more revisions in DT implants in males <65 years, with a 28-mm head size or smaller.

CONCLUSIONS

Modularity did not result in lower survival rates in dysplastic patients and may even reduce the rate of aseptic loosening in comparison to ST stems. The rate of implant breakage is not negligible. Younger males are not good candidates for titanium DT stems.

Bimodular femoral stems in primary total hip arthroplasty

INTRODUCTION

This review critically examines the efficacy of dual-modular stems in primary total hip arthroplasty. Given the variability and non-comparability of certain femoral stem designs and stem-neck couplings, with some even being withdrawn from the market, this review offers an in-depth analysis of predominant implant performances.

AREAS COVERED

The paper explores a brief historical summary related to dual-modular stems, including the complications associated with their use, diagnostic tools for evaluation, analysis of both recalled and currently available models, as well as alternative therapeutic options. This information is pertinent for both clinical and research domains.

EXPERT OPINION

While dual-modular systems were initially touted to offer several advantages, the evidence substantiating these benefits has been ambiguous. Further, these systems introduce the risk of alternative complications. In specific cases involving patients with developmental hip dysplasia and certain proximal femoral deformities requiring complex reconstructions, dual-modular systems might be relevant. Nonetheless, the use of long interchangeable necks in patients with a body mass index above 30 kg/m2 is discouraged, and pairing a long varus-oriented neck with an extra-long femoral head should be avoided in all patients.

Dual-Modular Versus Single-Modular Stems for Primary Total Hip Arthroplasty: A Long-Term Survival Analysis

Background and Objectives: Increased revision rate of dual-modular (DM) femoral stems in primary total hip arthroplasty (THA) because of modular-neck breakage and adverse local tissue reactions (ALTRs) to additional junction damage products is well established and some designs have been recalled from the market. However, some long-term studies of specific DM stems did not confirm the inferiority of these stems compared to standard single-modular (SM) stems, and a head-to-head comparison THA is missing. The objectives of this multicentre study were to determine the survivorship and complication rates of a common DM stem design compared to a similar SM stem. Materials and Methods: In a time frame from January 2012 to November 2015, a cohort of 807 patients (882 hips) consecutively underwent primary cementless THAs at two orthopaedic centres. 377 hips were treated with a Zweimüller-type DM stem THA system and 505 hips with a similar SM stem THA system, both including a modern press-fit acetabulum. Kaplan-Meier survivorship and complication rates were compared between both groups in a median follow-up of 9.0 years (maximum, 9.9 years). Results: The 9-year survivorship of the DM stem THA system (92.6%, 95% CI 89.9-95.3) was significantly lower than that of the SM stem THA system (97.0%, 95% CI 95.2-98.8). There were no differences in revision rates for septic loosening, dislocation, and periprosthetic fractures between the two groups. One ceramic inlay and one Ti-alloy modular neck breakage occurred in the DM stem THA system group, but the main reason for revision in this group was aseptic loosening of components. Conclusions: The survivorship of the DM stem THA system was lower than the similar SM stem THA system in a comparable clinical environment with long-term follow-up. Our results confirmed that no rationale for stem modularity exists in primary THAs.

Analysis of New Orthopaedic Technologies in Large Database Research

Improvements in orthopaedic surgery go hand in hand with technological advances. The present article outlines the historical and current uses of large databases and registries for the evaluation of new orthopaedic technologies, providing insights for future utilization, with robotic-assisted surgery as the example technology.

Long-term survivorship of an exchangeable-neck hip prosthesis with a Ti-alloy/Ti-alloy neck-stem junction

INTRODUCTION

Breakage of exchangeable-neck (EN) and adverse local tissue reactions (ALTRs) to neck-stem junction (NSJ) damage products are responsible for increasing the revision rate of EN hip prostheses. We investigated the survivorship of an EN hip prosthesis including a NSJ with both components made of titanium alloy (Ti-alloy/Ti-alloy) to assess whether, and to what extent, EN breakage and NSJ damage affected implant survivorship.

MATERIALS AND METHODS

Using data from a hip replacement registry, we determined survivorship of 2857 EN prostheses. Long-offset configurations of head and EN were implanted in heavy (> 90 kg) patients only in 23 hips. We investigated under which conditions EN breakages or ALTRs occurred. We also measured titanium (Ti) and vanadium (V) blood concentrations in 24 patients with a unilateral well-working prosthesis.

RESULTS

The 17-year survival rates for any reason and aseptic loosening of any component were 88.9% (95%CI 87.5-90.1; 857 hips at risk) and 96.9% (95%CI 96.0-97.6), respectively. There were two cases of EN breakage and one case of ALTR (metallosis), due to rim-neck impingement, out of 276 revisions. After an average period of 9.8 years (range 7.8-12.8 years), the maximum Ti and V blood concentrations in patients with a well-working prosthesis were 5.0 µg/l and 0.16 µg/l, respectively.

CONCLUSION

The present incidence of EN breakage or ALTR is lower than those reported in other studies evaluating EN hip prosthesis survivorship. This study suggests that (i) the risk of EN breakage is reduced by limiting the use of long-offset configurations in heavy patients and (ii) Ti-alloy/Ti-alloy NSJ damage products do not promote ALTR nor significantly alter the rate of implant loosening. Since design decisions and implant configuration determine the NSJ strength, the NSJ strength in working conditions must be thoroughly investigated to proper define the clinical indications for any EN design.

Survival rate of total hip replacements with matched and with mixed components with 10.7 years mean follow-up

BACKGROUND

Mixing and matching components from different manufacturers in total hip arthroplasty is a frequently used off-label praxis. The clinical consequences of this procedure have not been studied in detail.

METHODS

860 patients with matched and 1067 patients with mixed primary total hip replacement (THR) components carried out between 1 January 2002 and 31 December 2004, were selected from our Institution registry. The analysis endpoint was set at 1 January 2016. THRs with poorly performing components were excluded from study groups. Kaplan-Meier survival curves for both groups were calculated and compared using the Log-Rank test and the demographic data using the chi-square test. Correlations between demographic data and revisions were calculated using bivariate correlation.

RESULTS

28 revisions were carried out in the matched group and 67 in the mixed group. The 14-year overall survival probability was significantly better in the former (96.0%) than in the mixed group (92.7%) (p = 0.002). Survival, free of aseptic and septic failures, was statistically, significantly higher in the matched group (p = 0.026 and p = 0.007, respectively).The survival of the mixed subgroup with heads and stems from the same manufacturer did not differ statistically from that of the matched group (p = 0.079).

CONCLUSIONS

In contrast to the results listed in the National Joint Registry and the New Zealand Joint Registry, the survival probability in our study was, statistically, significantly higher in total hip replacements using components of the same manufacturer. Importantly, mixing and matching the components of different manufacturers led to similar survival providing the head and the stem were from the same manufacturer.

The different failure modes of the connecting elements of the modular hip arthroplasty revision stem Revitan

INTRODUCTION

Fracture of the femoral stem is the cause of ~1 % of revisions after total hip arthroplasty. The risk increases intrinsically with modularity, whereby modularity is particularly useful in revision arthroplasty. We present 7 cases of failure of a specific modular, tapered, fluted, titanium alloy Revitan stem and analyse the different failure modes.

METHODS

Retrospective review of all Revitan stems revised at our institutions due to implant failure and analysis of clinical presentation, diagnostic workup, and failure mode. The retrieved components were analyzed by optical and scanning electron microscopy.

RESULTS

A total of 7 cases were included. There was a significant time lag between symptom onset and correct diagnosis. Conventional radiographs and low-dose CT scans (CT scout imaging) were decisive for diagnosis. All failures occurred at the level of the connection between the proximal component and the distal part of the stem. Three different failure modes were identified: loosening of the proximal component, fatigue fracture of the connection pin, and distal loosening of the connection pin. No alterations of the microstructure or deviation from manufacturing specifications regarding dimensions were observed. Failure was caused by mechanical overload.

CONCLUSION

Conventional radiographs are the mainstay in identifying failed modular stems. Repeated radiographs and low-dose CT scans may be helpful additions. No single modification of the connection will address all possible failure modes. Modularity of revision stems offers advantages up until insertion of the definitive stem. Monoblock definitive stems might overcome the potential mechanical weaknesses of modularity and should be considered in relatively young, heavy and active patients.

Role of real-world digital data for orthopedic implant automated surveillance: a systematic review

INTRODUCTION

Data collection automation through the reuse of real-world digital data from clinical data warehouses (CDW) could represent a great opportunity to improve medical device monitoring. For instance, this approach is starting to be used for the design of automated decision support systems for joint replacement monitoring. However, a number of obstacles remains, such as data quality and interoperability through the use of common and regularly updated terminologies, and the use of a Unique Device Identifier (UDI).

AREAS COVERED

To present the existing models of automated surveillance of orthopedic devices, a systematic review of initiatives using real-world digital health data to monitor joint replacement surgery was performed following the PRISMA 2020 guidelines. The main objective was to identify the data sources, the target populations, the population size, the device location, and the main results of studies on such initiatives.

EXPERT OPINION

Analysis of the identified studies showed that real-world digital data offer many opportunities for improving the automation of monitoring in orthopedics. The contribution of real-world data, especially through natural language processing, UDI use in CDW and the integration of device databases, is needed for automated and more robust health surveillance.

Dual Modular Titanium Alloy Femoral Stem Failure Mechanisms and Suggested Clinical Approaches

Titanium (Ti) alloys have been proven to be one of the most suitable materials for orthopaedic implants. Dual modular stems have been introduced to primary total hip arthroplasty (THA) to enable better control of the femoral offset, leg length, and hip stability. This systematic review highlights information acquired for dual modular Ti stem complications published in the last 12 years and offers a conclusive discussion of the gathered knowledge. Articles referring to dual modular stem usage, survivorship, and complications in English were searched from 2009 to the present day. A qualitative synthesis of literature was carried out, excluding articles referring solely to other types of junctions or problems with cobalt-chromium alloys in detail. In total, 515 records were identified through database searching and 78 journal articles or conference proceedings were found. The reasons for a modular neck fracture of a Ti alloy are multifactorial. Even though dual modular stems have not shown any clinical benefits for patients and have been associated with worse results regarding durability than monolithic stems, some designs are still marketed worldwide. Orthopaedic surgeons should use Ti6Al4V dual modular stem designs for primary THA in special cases only.

Systematic review of primary total hip arthroplasty using titanium-titanium modular-neck prostheses: the true risk of revision

AIMS

Modular-neck femoral implants are used to enable more variability in femoral neck version, offset and length. It has been reported that these implants carry a higher rate of revision. The aim of this review was to assess the overall and cause-specific revision rate of titanium-titanium alloy modular-neck implants in primary total hip arthroplasty (THA).

METHODS

A systematic review was conducted following PRISMA guidelines and utilising multiple databases. All results were screened for eligibility. Studies published from 2000 onwards, using a current-generation, titanium-titanium, modular-neck implant were included. Overall and cause-specific revision rates were analysed, comparing to fixed-neck prostheses where applicable.

RESULTS

920 studies were screened. After applying exclusion criteria, 23 were assessed in full and 14 included. These consisted of 12 case series and 2 joint registry analyses. 21,841 patients underwent a modular-neck implant with a weighted mean follow-up of 5.7 years, mean age of 62.4 years, and average body mass index (BMI) of 28.4kg/m². The overall revision rate was 3.95% and 2.98% for modular and fixed-neck prostheses, respectively. For studies with >5 years follow-up the mean revision rate was 3.08%. There was no difference in cause-specific revision rates by implant design. Mean improvement in Harris Hip Score was 41.9.

CONCLUSIONS

At medium-term, revision rates for titanium-titanium primary modular-neck THA are acceptable. These prostheses are a sensible management option in patients with considerable anatomical hip deformity not amenable to correction with standard fixed-neck implants. Patients of male gender, high BMI and requiring prostheses with a larger neck, offset or head are at higher risk of implant failure.

Low Reinfection Rates But a High Rate of Complications in THA for Infection Sequelae in Childhood: A Systematic Review

BACKGROUND

Childhood hip infections can result in serious sequelae during adulthood, including persistent pain, functional limitations, and premature THA. When THA is performed in patients who had hip joint infections during childhood, surgeons surmise these arthroplasties are at an increased risk of complications and incomplete recovery. However, the degree to which this is true is not well characterized and has varied across a large number of small, retrospective studies.

QUESTIONS/PURPOSES

(1) What proportion of THAs performed in patients who had pediatric septic arthritis result in periprosthetic joint infection? (2) What are the Harris hip scores associated with these reconstructions? (3) What proportion of these patients develop complications after THA? (4) What proportion of patients undergo revision after these THAs?

METHODS

For this systematic review, we searched the MEDLINE (PubMed), Scopus, and CINAHL (EbscoHost) electronic databases. We evaluated studies published in English between 1980 and 2020 that had a minimum of 10 patients (with a minimum of 2 years of follow-up) in whom sequelae of septic arthritis of the hip were treated with single-stage THA. We also evaluated studies reporting clinical outcomes by means of the Harris hip score, along with a radiographic assessment of the prosthesis. Updates of previous studies using the same database, case reports, surgical technique reports, systematic reviews, and expert opinions were excluded. No restrictions were applied regarding study design and loss to follow-up. A total of 430 studies were identified through the initial search, and 11 studies were included after applying the inclusion and exclusion criteria. All but two studies, which included a historical control group, were retrospective case series. A total of 691 patients with a mean age of 45 years were involved. A total of 599 patients underwent cementless THAs, 84 patients underwent hybrid THA (cemented stems), and the remaining eight patients received a cemented THA. A total of 287 additional procedures were performed on the acetabulum, including autografting, allografting, and medial wall osteotomies; in three hips, tantalum augments were used. Three hundred thirty-five additional procedures were performed on the femora, including 223 shortening osteotomies and 112 greater trochanter osteotomies. The mean follow-up duration ranged from 5.5 to 15.2 years (minimum follow-up range 2-13 years). To assess the quality of the studies, we used the Methodological Index for Non-randomized Studies and the Assessment of Quality in Lower-limb Arthroplasty, for which a higher score represents a better study quality. The mean Methodological Index for Non-randomized Studies score for case series was 9 of 16 (range 6-12), and 19 and 18 of 24 for the two comparative studies. The mean reporting quality of the Assessment of Quality in Lower Limb Arthroplasty score was 6 of 8 (range 3-8).

RESULTS

Because of loss to follow-up, which was not consistently reported in the source studies, we caution the reader that the estimates provided here likely underestimate the risks of adverse events and overestimate the mean hip scores. The pooled proportion of patients in whom infections developed was 1% (seven of 691 THAs). Considering only studies published in the past 10 years, the proportion was 0.7% (two of 276 THAs). The Harris hip score increased from a mean of 52 ± 6 points before THA to a mean of 88 ± 2 points after THA. The pooled proportion of complications, including sciatic nerve palsy, femoral nerve palsy, intraoperative periprosthetic fracture, deep venous thrombosis, and dislocation, was 11% (76 complications among 691 THAs). The pooled proportion of patients who underwent revision was 8% (53 revisions of any components for any reason among 691 THAs) at a mean follow-up interval of 9.1 ± 3 years.

CONCLUSION

In THAs for sequelae of childhood septic arthritis, reinfections were uncommon, whereas generally, infection rates were slightly higher than those reported for conventional primary THAs. However, the duration of follow-up might have been insufficient to identify all patients in whom infections later developed, and the available data were not adequate to precisely detect the minimum quiescent period to avoid reinfections. Moreover, the studies in this systematic review were retrospective, and selection bias, transfer bias, and assessment bias likely influenced our findings. The general effect of these biases is to cause an underestimation of the harms of the intervention. Complications, especially intraoperative fracture and nerve palsy, were common in patients with the most-severe infections. Further data on this topic are needed, ideally from multicenter or registry studies with even longer follow-up durations.

LEVEL OF EVIDENCE

Level IV, therapeutic study.

Mid-term results of total hip arthroplasty using a novel uncemented short femoral stem with metaphyso-diaphyseal fixation

PURPOSE

Short stems were developed with the promise of providing easier implantation, facilitating revision, reducing thigh pain and proximal stress shielding. The aim of this study is to present the mid-term clinical results of a titanium short stem with modular neck.

METHODS

This is a prospective case series of 144 THAs performed on a series of 131 patients using the PROFEMUR Preserve Femoral Stem (MicroPort Orthopedics, Arlington, TN, USA). 2 surgeons, operated on the patients using a mini-posterior approach. The primary outcomes evaluated were stem revision for aseptic loosening and all-cause stem revision. Clinical and radiographic outcomes were also assessed.

RESULTS

Of the 144 THAs, there were 43 males and 101 females, with an average age of 61 (range 22-92) years at surgery. After a mean of 78 (range 53-87) months follow-up, there were 2 (1.5%) femoral implant revisions; 1 for early femoral periprosthetic fracture and 1 for fatigue failure of the modular femoral neck. There were no cases of stem aseptic loosening and radiographic analysis demonstrated no cases of stem migration. The mean UCLA activity, WOMAC and Fogotten Joint scores were respectively 6.1, 10.7 and 86.6. 70% of prosthetic hips were observed as having no restriction and 99.2% of patients were satisfied with their THA.

CONCLUSIONS

This short modular stem produced satisfactory clinical and radiological results at mid-term, with 98.5% implant survival for any cause of stem revision and no revisions for aseptic loosening. Long-term results are required to further evaluate the stem's promising early results.

Interchangeable neck failures of bi-modular femoral stems in primary total hip arthroplasty cannot be predicted from serum trace element analysis

INTRODUCTION

Revision of a well-fixed stem due to unexpected modular neck fracture is a catastrophe for the patient and a challenge for the surgeon. This study aimed to test the possibility of predicting interchangeable neck fracture from serum levels of the stem/neck alloy-consisting metals.

MATERIALS AND METHODS

Nineteen patients at high risk for interchangeable neck fracture were randomly selected out of a cohort of 680 bimodular stems made from Ti6Al4V alloy. Serum levels of titanium, aluminium and vanadium were determined. Nine age- and gender-matched patients were used as controls.

RESULTS

Mean serum levels of Ti were 6.04 ± 2.52 μg/L, of Al 3.89 ± 1.68 μg/L and of V 0.07 ± 0.04 μg/L in the high-risk group, and 8.22 ± 4.74 μg/L, 4.99 ± 3.98 μg/L and 0.27 ± 0.44 μg/L in the low-risk group, respectively. No statistically significant differences were found between the groups.

DISCUSSION

Interchangeable neck fracture of bimodular femoral stems cannot be predicted from serum trace element analysis.

Neck modularity in total hip arthroplasty: a retrospective study of nine hundred twenty-eight titanium neck implants with a maximum follow-up of eighteen years

PURPOSE

Neck modularity was introduced to improve total hip arthroplasty (THA) accuracy, but it has been associated with early breakages and corrosion issues. In our hospital, modular necks have been in clinical use since the 1990s. We retrospectively analysed the occurrence of these sequelae in implants placed between January 2000 and December 2014.

METHODS

Survival data from patients operated on in our hospital were obtained from the regional arthroplasty registry (Registro dell'Impiantologia Protesica Ortopedica, RIPO). The cohort comprised 928 THAs on 908 patients. The average patient age was 67.8 years. Main indications were primary osteoarthritis (71.4%), fracture (9.2%), congenital dysplasia or congenital luxation (7.8%), and idiopathic osteonecrosis (6.4%). All femoral stems were cementless, with 318 anatomically shaped (34.3%), 579 straight (62.4%), and 31 short stems (3.3%). All necks used were made of titanium alloy. The average follow-up time was 9.6 years (range, 4-18 years).

RESULTS

In total, 66 revisions were reported. The main revision causes were periprosthetic fractures (33.3%), aseptic stem loosening (19.7%), luxation (18.2%), and implant breakage (12.1%). Five modular neck breakages were recorded. The overall survival rate was 87.7% at 17 years. We did not observe any component corrosion. The neck breakage rate was 0.5%, and the luxation rate was 1.3%.

CONCLUSIONS

Our experience suggests that neck modularity is a safe, effective way to reconstruct the proximal femur in THA patients. We attribute the absence of corrosion to the exclusive use of titanium necks.

How to proceed with asymptomatic modular dual taper hip stems in the case of acetabular revision

How to proceed with a clinically asymptomatic modular Metha® Ti alloy stem with dual taper CoCr neck adapter in case of acetabular revision? To systematically answer this question the status of research and appropriate diagnostic methods in context to clinically symptomatic and asymptomatic dual taper stem-neck couplings has been evaluated based on a systematic literature review. A retrieval analysis of thirteen Metha® modular dual taper CoCr/Ti alloy hip stems has been performed and a rational decision making model as basis for a clinical recommendation was developed. From our observations we propose that in cases of acetabular revision, that for patients with a serum cobalt level of > 4 µg/L and a Co/Cr ratio > 3.6, the revision of the modular dual taper stem may be considered. Prior to acetabular revision surgery a systematic diagnostic evaluation should be executed, using specific tests such as serum metal (Co, Cr) ion analysis, plain antero-posterior and lateral radiographs and cross-sectional imaging modalities (Metal Artefact Reduction Sequence Magnetic Resonance Imaging). For an asymptomatic Metha® dual taper Ti alloy/CoCr stem-neck coupling at the stage of acetabular revision careful clinical decision making according to the proposed model should be followed and overreliance on any single examination should be avoided, considering the complete individual differential diagnosis and patient situation.

Burden of fractures in France: incidence and severity by age, gender, and site in 2016

PURPOSE

Fractures are common events, but the exact incidence and severity of fractures have not been clearly determined for most anatomical sites. We estimated the incidence and severity of fractures in France regardless of the anatomical site.

METHODS

Observational cross-sectional study in France in 2016 based on the national health data system. All incident fractures in patients 20 years and older were included. We determined the anatomical fracture site (12 sites) and the severity using a 4-point scale (outpatient care, hospitalization, surgery, and in-hospital death).

RESULTS

We identified 562,094 incident fractures, predominantly occurring in women (319,858: 56.9%); with a mean age of 63.6 years, and an exponential increase after the age of 70 years. Distal upper limb (172,591: 30.7%), distal lower limb (84,602: 15.1%), and femoral neck (78,766: 14.0%) accounted for more than one-half of all fractures. Sex and age of onset distributions varied widely according to fracture sites, with earlier onset for distal lower limb fractures (mean age: 54.2 years) and distal upper limb fractures (mean age: 55.2 years) with a men predominance for skull fractures. Only 105,165 (18.7%) fractures were treated on an outpatient basis; 11,913 (2.1%) in-hospital deaths occurred in patients with a mean age of 79.5 years. High mortality was observed for skull (12.9%), rib (4.9%), and femoral fractures (femoral neck 4.3% and proximal lower limb 4.2%).

CONCLUSION

We estimated the incidence of fractures in France by sex and anatomical site. We also showed that fractures remain common and serious life events, especially in older people.

Effect of placement of acetabular prosthesis on hip joint function after THA

The good recovery of hip function after THA depends on reconstruction of acetabular prosthesis accurately. So we investigated the effect of acetabular prosthesis placement on hip joint function after THA and analyzed the clinical data of 432 patients with unilateral THA retrospectively . The patients were followed-up to evaluate the Harris score and hip range of motion (ROM). The hip ROM, the Harris score and the good rate of Harris score were compared between different groups. Comparison of the good rate of Harris score showed that 85%∼100% group of the rotation center horizontal position ratio was higher than >100% group; 80%∼120% group of the rotation center vertical position ratio was higher than >160% group; and the 90%∼110% group and 110%∼130% group of femoral offset ratio were higher than 90% and >130% groups. Comparison of Harris score showed that 85%∼100% and 70%∼85% groups of rotation center horizontal position ratio were higher than 70% and >100% groups; 80%∼120% group of rotation center vertical position ratio was the highest; and 90%∼110% group and 110%∼130% group of femoral offset ratio were higher than >130% and 90% groups. Comparison of hip ROM showed that 85%∼100% and 70%∼85% groups of the rotation center horizontal position ratio were higher than 70% and >100% groups; 80%∼120% group of the rotation center vertical position ratio was the highest; and hip ROM from high to low are 90%∼110%, 110%∼130%, >130% and 90% groups of femoral offset ratio. These findings indicated that during the early follow-up period of THA, if the horizontal position of femoral head rotation center was reconstructed in 0.85 to 1 times of healthy side when compared with reconstruction >1 times of the healthy side and if the vertical position of femoral head rotation center was reconstructed in 0.8 to 1.2 times of the healthy side when compared with reconstruction in >1.6 times of the healthy side, better hip function recovery and optimal hip ROM were obtained. The optimal reconstruction range of femoral offset is 0.9 to 1.3 times of the healthy side.

Ten-year outcomes of cementless anatomical femoral implants after 3D computed tomography planning. Follow-up note

BACKGROUND

Pre-operative 3D planning based on computed tomography (CT) imaging is used to optimise the restitution of normal hip anatomy during primary total hip arthroplasty (THA). Although CT planning has been proven effective and reproducible, its influence on long-term THA outcomes is unknown. In this 10-year follow-up study of patients managed with the same technique of CT-planned primary anatomical THA, the objectives were to assess femoral implant survival, long-term functional outcomes, 10-year outcomes of titanium modular femoral necks, and associations with the dislocation rate. Hypothesis Pre-operative CT planning of primary THA ensures achievement of the NICE criterion of a lower than 5% femoral revision rate within 10 years.

MATERIAL AND METHODS

The study included 61 patients (61 hips) managed between 2004 and 2007 by CT-planned primary THA via the posterior approach, with an uncemented anatomical femoral component (SPS^®, Symbios); when deemed necessary by the surgeon to restore normal anatomy, a titanium modular femoral neck was used (35/61 patients). After 10 years, 17 patients had died and 3 were lost to follow-up, leaving 41 patients with a mean age of 76 years (range, 60-91 years) for re-evaluation. Clinical outcomes were assessed by determining the Harris Hip Score (HHS) and the Postel-Merle d'Aubigné (PMA) score, which were compared to baseline values. Radiographs were evaluated using the AGORA Roentgenographic Assessment system (ARA).

RESULTS

The 10-year femoral component survival rate was 96% (95%CI, 88;99%). Revision was required in 4 patients, to treat delayed peri-prosthetic fractures (n=2) or to correct initial cup malposition (n=2). No changes occurred from 2010 to last follow-up in the mean HHS (90 [95%CI, 84;95] and 91 [95%CI, 77;96], respectively) or mean PMA score (16 [95%CI, 14;17] and 15.5 [95%CI, 14;16.5], respectively). The mean ARA score was 5.2 (range, 3-6) at last follow-up. No complications related to the use of modular femoral necks were recorded. Dislocation occurred in 2 patients, but in neither was the pre-operative plan followed during surgery.

DISCUSSION

The SPS^® stem produced good 10-year clinical and radiographic outcomes. No patients experienced complications related to use of a titanium modular femoral neck. The restoration of anatomical hip geometry made possible by pre-operative CT planning provided sustained clinical improvements with a low complication rate.

LEVEL OF EVIDENCE

IV, retrospective observational cohort study.

What Factors Are Associated With Neck Fracture in One Commonly Used Bimodular THA Design? A Multicenter, Nationwide Study in Slovenia

BACKGROUND

Femoral stems with bimodular (head-neck as well as neck-body) junctions were designed to help surgeons address patients' hip anatomy individually. However, arthroplasty registers have reported higher revision rates in stems with bimodular junctions than in stems with modularity limited to the head-neck trunnion. However, to our knowledge, no epidemiologic study has identified patient-specific risk factors for modular femoral neck fractures, and some stems using these designs still are produced and marketed.

QUESTIONS/PURPOSES

The purposes of this study were (1) to establish the survival rate free from aseptic loosening of one widely used bimodular THA design; (2) to define the proportion of patients who experienced a fracture of the stem's modular femoral neck; and (3) to determine factors associated with neck fracture.

METHODS

In this retrospective, nationwide, multicenter study, we reviewed 2767 bimodular Profemur® Z stems from four hospitals in Slovenia with a mean followup of 8 years (range, 3 days to 15 years). Between 2002 and 2015, the four participating hospitals performed 26,132 primary THAs; this implant was used in 2767 of them (11%). The general indications for using this implant were primary osteoarthritis (OA) in 2198 (79%) hips and other indications in 569 (21%) hips. We followed patients from the date of the index operation to the date of death, date of revision, or the end of followup on March 1, 2018. We believe that all revisions would be captured in our sample, except for patients who may have emigrated outside the country, but the proportion of people immigrating to Slovenia is higher than the proportion of those emigrating from it; however, no formal accounting for loss to followup is possible in a study of this design. There were 1438 (52%) stems implanted in female and 1329 (48%) in male patients, respectively. A titanium alloy neck was used in 2489 hips (90%) and a cobalt-chromium neck in 278 (10%) hips. The mean body mass index (BMI) at the time of operation was 29 kg/m (SD ± 5 kg/m). We used Kaplan-Meier analysis to establish survival rates, and we performed a chart review to determine the proportion of patients who experienced femoral neck fractures. A binary logistic regression model that controlled for the potential confounding variables of age, sex, BMI, time since implantation, type of bearing, diagnosis, hospital, neck length, and neck material was used to analyze neck fractures.

RESULTS

There were 55 (2%) aseptic stem revisions. Survival rate free from aseptic loosening at 12 years was 97% (95% confidence interval [CI] ± 1%). Fracture of the modular neck occurred in 23 patients (0.83%) with a mean BMI of 29 kg/m (SD ± 4 kg/m.) Twenty patients with neck fractures were males and 19 of 23 fractured necks were long. Time since implantation (odds ratio [OR], 0.55; 95% CI 0.46-0.66; p < 0.001), a long neck (OR, 6.77; 95% CI, 2.1-22.2; p = 0.002), a cobalt-chromium alloy neck (OR, 5.7; 95% CI, 1.6-21.1; p = 0.008), younger age (OR, 0.91; 95% CI, 0.86-0.96; p < 0.001), and male sex (OR, 3.98; 95% CI, 1.04-14.55; p = 0.043) were factors associated with neck fracture.

CONCLUSIONS

The loosening and neck fracture rates of the Profemur® Z stem were lower than in some of previously published series. However, the use of modular femoral necks in primary THA increases the risk for neck fracture, particularly in young male patients with cobalt-chromium long femoral necks. The bimodular stem we analyzed fractured unacceptably often, especially in younger male patients. For most patients, the risks of using this device outweigh the benefits, and several dozen patients had revisions and complications they would not have had if a different stem had been used.

LEVEL OF EVIDENCE

Level III, therapeutic study.

Early outcomes after revision total hip arthroplasty with a modern modular femoral revision stem in 65 consecutive cases

Background

We evaluated the early outcomes, including all-cause revisions, aseptic revisions, and reoperations after revision total hip arthroplasty (THA) using a single modern modular femoral stem design.

Methods

A retrospective cohort study on a consecutive series of 62 patients (65 hips) who underwent revision THA with a modern modular femoral stem system, between January 2011 and October 2015, at a single academic medical center was performed. A cumulative incidence competing risk model was used to evaluate the cumulative incidence of failure with death as the competing risk.

Results

The cumulative incidence rate of all-cause revision THA was 14.5% (95% confidence interval [CI], 6%–24%) at 2 years when accounting for the competing risk of death. The rate of aseptic revisions was 6.8% (95% CI, 0.1%–13%), and the rate of all-cause reoperations was 21.6% (95% CI, 11%–31%). Ten THA cases (15%) underwent re-revision THA for any reason: five for infection and five for aseptic failures. The mean time to re-revision was 1 year (range, 0.04–5.34). Patients with a preoperative Mallory classification of 3 or more were at greater risk for reoperation (sub-hazard rate, 3.84; 95% CI, 1.54–9.53; P = .004).

Conclusions

Although the high incidence of reoperation illustrates the complexity of the revision THA population, particularly related to infection and joint instability, the relatively low rate of aseptic failures, minimal radiographic subsidence, and the lack of modular junctional failures suggest that the use of this modular revision THA system may provide adequate fixation and could be considered as a viable treatment option in the setting of revision THA.

Modular femoral neck failure after revision of a total hip arthroplasty: a finite element analysis

The authors report on a case of modular femoral neck fracture which appeared 21 months after revision of acetabular component. The revision surgery was performed 8 years after the primary total hip arthroplasty due to aseptic loosening of the acetabular component. During acetabular revision, the primary implanted short (S, - 3.5 mm) femoral head was also exchanged with extra-long (XL, + 7.0 mm) femoral head fitting the modular femoral neck with a longer lever arm. Numerical analysis has shown that this has resulted in a 19.9% increase in tensile stress at the neck-stem coupling during normal walking cycle. This could result in microcrack initiation and propagation and finally lead to modular neck failure of the otherwise well-fixed stem. Surgeons should avoid excessive loading of the exchangeable neck (dual-modular) femoral stem designs as the stem-neck couplings are subject to corrosion and are not as reliable as monoblock stems.

Withdrawn: A Randomized Controlled Trial Comparing Modular and Nonmodular Neck Versions of a Titanium Stem

This article has been withdrawn at the request of the author(s) and/or editor. The Publisher apologizes for any inconvenience this may cause. The full Elsevier Policy on Article Withdrawal can be found at https://www.elsevier.com/about/our-business/policies/article-withdrawal.

Thromboembolic risk after lumbar spine surgery: a cohort study on 325 000 French patients

Essentials The risk of venous thromboembolism (VTE) after lumbar spine surgery (LBS) is not precisely known. More than 320 000 patients who underwent LBS in France between 2009 and 2014 were followed-up. The overall risk of VTE after LBS is less than 1% but modulated by patient and procedural factors. Surgical device implantation, anterior approach and complex surgery increase the risk of VTE. SUMMARY: Background Postoperative venous thromboembolism (VTE) is a severe complication, the risk of which after lumbar spine surgery (LBS) is not precisely known. Objective To estimate the incidence of VTE after LBS, and to identify individual and surgical risk factors. Methods All patients aged >18 years who underwent LBS in France between 2009 and 2014 were identified. Among 477 024 patients screened, exclusions concerned recent VTE or surgery, and multiple surgeries during the same hospital stay. Results In 323 737 patients (mean age 52.9 years, 51.4% male), we observed 2911 events (0.91%) after a median time of 12 days (Q1-Q3: 5-72 days). The multivariate adjusted Cox model showed increased risks associated with age (4% per year of age; 95% confidence interval [CI] 3.8-4.3), obesity (hazard ratio [HR] 1.32, 95% CI 1.18-1.46), active cancer (HR 1.65, 95% CI 1.5-1.82), previous thromboembolism (HR 5.41, 95% CI 4.74-6.17), severe paralysis (HR 1.47, 95% CI 1.17-1.84), renal disease (HR 1.28, 95% CI 1.04-1.6), psychiatric disease (HR 1.21, 95% CI 1.1-1.32), use of antidepressants (HR 1.13, 95% CI 1.03-1.24), use of contraceptives (HR 1.56, 95% CI 1.19-2.03), extended surgery for scoliosis (HR 3.61, 95% CI 2.96-4.4), implantation of pedicular screws with a 'dose-effect' association, and an anterior approach (HR 1.97, 95% CI 1.6-2.43) or a combined approach (HR 2.03, 95% CI 1.44-2.84). Conclusions The overall VTE risk after LBS is moderate (< 1%) but is widely modulated by several easily identifiable risk factors. The surgical community should be aware of this heterogeneity, adapt prevention according to patients and to the procedure, and use drug prophylaxis in the event of a high risk being present.

Is There a Cardiotoxicity Associated With Metallic Head Hip Prostheses? A Cohort Study in the French National Health Insurance Databases

BACKGROUND

There are four distinguishable types of THA devices in wide use, as defined by the femoral and acetabular bearing surfaces: metal-on-polyethylene (MoP), ceramic-on-polyethylene (CoP), metal-on-metal (MoM), and ceramic-on-ceramic (CoC). Metallic head THAs (MoP and MoM) can potentially induce cardiac toxicity because cobalt species, generated at the head-neck trunnion, and in the case of MoM devices, at the articular surface as well, can be absorbed systemically. However, studies have provided inconsistent results.

QUESTIONS/PURPOSES

The purpose of this study was to assess the risk of dilated cardiomyopathy (DCM) or heart failure (HF) associated with metallic head THAs using data from the French national health insurance databases.

METHODS

Between 2008 and 2011 in France, 399,968 patients ≥ 55 years had a first THA. A total of 127,481 were excluded after we applied the exclusion criteria regarding arthroplasty and 17,137 as a result of a history of DCM/HF, recorded in the French national health insurance reimbursement databases, between January 1, 2006, and the date of inclusion. The final cohort included 255,350 individuals (43% men; mean age 72 ± 9 years). Of them, 93,581 (37%) had been implanted with MoP, 58,095 (23%) with CoP, 11,298 (4%) with MoM, and 92,376 (36%) with CoC THAs. Patients were followed until December 2015. Patients with incident DCM/HF were identified by a new entitlement to the long-term disease scheme or a first hospitalization with a diagnosis of DCM or HF. MoP and CoP THAs are generally implanted in old patients, whereas MoM and CoC are mostly indicated in young, active male patients. Thus, to consider the specific indications of the bearing couples, analyses were separately performed in two distinct subcohorts, one comprising patients with MoP or CoP and one comprising patients with MoM or CoC THA. In each subcohort, the DCM/HF risk was compared between patients with metallic head versus nonmetallic head THAs (MoP versus CoP, MoM versus CoC). Hazard ratios (adjusted HRs) of incident DCM/HF were estimated using Cox models adjusted for baseline sex, age, THA characteristics (fixation technique with cement, use of a modular femoral neck), and comorbidities at baseline. Cox models were stratified by sex and age.

RESULTS

The crude incidence of DCM/HF per 100 person-years was 2.4 in patients with MoP, 1.8 with CoP, 1.2 with MoM, and 1.1 with CoC THAs. Overall, metallic head THAs were associated with a slight increase in DCM/HF risk (MoP versus CoP: adjusted HR, 1.08; 95% confidence interval [CI], 1.05-1.12; p < 0.001; MoM versus CoC: adjusted HR, 1.11; 95% CI, 1.03-1.19; p = 0.007). In the MoM-CoC subcohort, the risk tended to be more pronounced with MoM versus CoC THAs in women (MoM versus CoC: adjusted HR, 1.20; 95% CI, 1.07-1.35; p = 0.002) and patients aged ≥ 75 years (MoM versus CoC: adjusted HR, 1.16; 95% CI, 1.04-1.29; p = 0.009).

CONCLUSIONS

Metallic head THAs were associated with a slightly increased DCM/HF risk, especially with MoM in women and older patients. Some caveats should be mentioned: severity of DCM or HF was not available and residual confounding cannot be ruled out despite considering many covariates. Our findings suggest that cardiac function should be regularly monitored in patients with metallic head THAs. Further investigations should be planned on large international cohorts.

LEVEL OF EVIDENCE

Level III, therapeutic study.

Prevention of Dislocation After Total Hip Arthroplasty

BACKGROUND

Prevention of dislocation after primary total hip arthroplasty (THA) begins with patient preoperative assessment and planning.

METHODS

We performed a literature search to assess historical perspectives and current strategies to prevent dislocation after primary THA. The search yielded 3458 articles, and 154 articles are presented.

RESULTS

Extremes of age, body mass index >30 kg/m², lumbosacral pathology, surgeon experience, and femoral head size influence dislocation rates after THA. There is mixed evidence regarding the effect of neuromuscular disease, sequelae of pediatric hip conditions, and surgical approach on THA instability. Sex, simultaneous bilateral THA, and restrictive postoperative precautions do not influence the dislocation rates of THA. Navigation, robotics, lipped liners, and dual-mobility acetabular components may improve dislocation rates.

CONCLUSIONS

Risks for dislocation should be identified, and measures should be taken to mitigate the risk. Reliance on safe zones of acetabular component positioning is historical. We are in an era of bespoke THA surgery.

Association of Hysteroscopic vs Laparoscopic Sterilization With Procedural, Gynecological, and Medical Outcomes

IMPORTANCE

Safety of hysteroscopic sterilization has been recently questioned following reports of general symptoms such as allergy, tiredness, and depression in addition to associated gynecological results such as pelvic pain, perforation of fallopian tubes or uterus, and unwanted pregnancy.

OBJECTIVE

To compare the risk of reported adverse events between hysteroscopic and laparoscopic sterilization.

DESIGN, SETTING, AND PARTICIPANTS

French nationwide cohort study using the national hospital discharge database linked to the health insurance claims database. Women aged 30 to 54 years receiving a first hysteroscopic or laparoscopic sterilization between 2010 and 2014 were included and were followed up through December 2015.

EXPOSURES

Hysteroscopic sterilization vs laparoscopic sterilization.

MAIN OUTCOMES AND MEASURES

Risks of procedural complications (surgical and medical) and of gynecological (sterilization failure that includes salpingectomy, second sterilization procedure, or pregnancy; pregnancy; reoperation) and medical outcomes (all types of allergy; autoimmune diseases; thyroid disorder; use of analgesics, antimigraines, antidepressants, benzodiazepines; outpatient visits; sickness absence; suicide attempts; death) that occurred within 1 and 3 years after sterilization were compared using inverse probability of treatment-weighted Cox models.

RESULTS

Of the 105 357 women included (95.5% of eligible participants; mean age, 41.3 years [SD, 3.7 years]), 71 303 (67.7% ) underwent hysteroscopic sterilization, and 34 054 (32.3%) underwent laparoscopic sterilization. During the hospitalization for sterilization, risk of surgical complications for hysteroscopic sterilization was lower: 0.13% for hysteroscopic sterilization vs 0.78% for laparoscopic sterilization (adjusted risk difference [RD], -0.64; 95% CI, -0.67 to -0.60) and was lower for medical complications: 0.06% vs 0.11% (adjusted RD, -0.05; 95% CI, -0.08 to -0.01). During the first year after sterilization, 4.83% of women who underwent hysteroscopic sterilization had a higher risk of sterilization failure than the 0.69% who underwent laparoscopic sterilization (adjusted hazard ratio [HR], 7.11; 95% CI, 5.92 to 8.54; adjusted RD, 4.23 per 100 person-years; 95% CI, 3.40 to 5.22). Additionally, 5.65% of women who underwent hysteroscopic sterilization required gynecological reoperation vs 1.76% of women who underwent laparoscopic sterilization (adjusted HR, 3.26; 95% CI, 2.90 to 3.67; adjusted RD, 4.63 per 100 person-years; 95% CI, 3.38 to 4.75); these differences persisted after 3 years, although attenuated. Hysteroscopic sterilization was associated with a lower risk of pregnancy within the first year of the procedure but was not significantly associated with a difference in risk of pregnancy by the third year (adjusted HR, 1.04; 95% CI, 0.83-1.30; adjusted RD, 0.01 per 100 person-years; 95% CI, -0.04 to 0.07). Risks of medical outcomes were not significantly increased with hysteroscopic sterilization compared with laparoscopic sterilization.

CONCLUSIONS AND RELEVANCE

Among women undergoing first sterilization, the use of hysteroscopic sterilization was significantly associated with higher risk of gynecological complications over 1 year and over 3 years than was laparoscopic sterilization. Risk of medical outcomes was not significantly increased over 1 year or over 3 years. These findings do not support increased medical risks associated with hysteroscopic sterilization.

Midterm outcomes of titanium modular femoral necks in total hip arthroplasty

Background

Modular femoral necks present surgical and biomechanical advantages in total hip arthroplasty (THA), but their benefits remain controversial due to risks of corrosion and fracture at the additional junction. This study aimed to report 10-year survival and clinical outcomes of a titanium femoral stem with a titanium modular neck in consecutive series.

Methods

The authors reviewed the records of 97 patients (99 THAs) using uncemented modular stem and ceramic-on-ceramic acetabular components. Patients were evaluated at minimum follow-up of 5 years using the Harris Hip Score (HHS) and Postel Merle-D'Aubigné score (PMA). Survival was calculated using the Kaplan-Meier (KM) method with any reoperation or revision as endpoint.

Results

From the original cohort, 14 patients died, 6 were lost to follow-up, and 5 had revision operations with exchange of the femoral stem. The KM survival at 10 years was 94.2% (CI, 86.5-97.5). Clinical assessment was performed on 67 of the 72 patients (69 of the 74 hips) presently living with their original THA components. At mean follow-up of 9.4±1.0 years (median, 10; range, 5-11), the HHS was 93.6±8.2 and the PMA score 17.0±1.6. The X-rays revealed no signs of adverse reactions or bone loss.

Conclusions

The uncemented titanium hip stem with modular titanium neck provided a satisfactory 10-year survival and clinical outcomes. Neck modularity enabled restoration of patient-specific femoral offset and limb length thanks to five possible neck configurations, though greater follow up is required to confirm the long-term benefits and safety of this design concept.

We are operating too much

With the increase of superspecialisation, there has been a recent trend for a rising number of operations for both trauma and orthopaedic ailments. This flies against the results of properly planned, well performed, adequately powered, with clinically relevant outcome measures and long enough follow-up level I studies which challenge the received wisdom that surgery is actually superior to conservative management or even supervised neglect. This editorial outlines some of these issues, and suggests that orthopaedic and trauma surgeons should actually think twice before operating on anything that comes our way.

Relative impact of hospital and surgeon procedure volumes on primary total hip arthroplasty revision: a nationwide cohort study in France

BACKGROUND

Both surgeon and hospital procedure volumes have been found to be associated with total hip arthroplasty (THA) outcomes. However, little research has been conducted on the relative influence. We studied the association between THA survivorship and both hospital and surgeon procedure volumes, considering their relative impact.

METHODS

A population-based cohort included all patients aged ≥40 years having received a unilateral primary THA from 2010 to 2011, from the French National Health Insurance Database. Patients were followed up until the end of 2014. The outcome was THA revision. Exposures of interest were procedure volumes, divided into tertiles: <1.5, 1.5-4, >4 and <7, 7-15, >15 procedures per month defined as low, medium, and high volumes for surgeon and hospital, respectively.

RESULTS

The cohort had 62,906 patients, with mean age 69 years and women 57%. Mean surgeon and hospital volumes were 8 and 23 procedures per month, respectively, and 5%, 72%, 22% and 7%, 28%, 65% of THAs were implanted by a low-, medium-, and high-volume surgeon or in a low-, medium-, and high-volume hospital, respectively. Median follow-up was 45 months (range, 0-57 months). In multivariate analysis, adjusted for both surgeon and hospital volumes, for patient and THA characteristics, a lower surgeon volume was associated with poorer THA survivorship (adjusted hazard ratio [aHR] = 1.19; 95% confidence interval [CI], 1.07-1.34 and aHR = 1.70; 95% CI, 1.40-2.05, for medium- and low-volume surgeon, respectively, compared with that of high volume), whereas hospital volume was not.

CONCLUSIONS

This study brings evidence to support the notion that THAs performed by high-volume surgeons in French private hospitals have higher survivorship in the first 4 years.