Evaluation of native and chemically modified Sargassum glaucescens for continuous biosorption of Co(II)

Enhanced adsorption and recyclability of surface modified hydrophobic silica aerogel with triethoxysilane: removal of cefixime by batch and column mode techniques

Amine modified pumice-derived silica aerogel (AMPDSA) was synthesized and grafted up to 6.52 [Formula: see text] with (3-aminopropyl) triethoxysilane for cefixime antibiotic adsorption. Using Response surface methodology, at the pH of 3, the maximum removal of cefixime of 80.42% for an initial concentration of 3.56 mg L^-1 was achieved at an equilibrium time of 150 min. The compliance of various kinetic and isotherm models for the batch sorption system was corroborated from the correlation coefficient (R²) values. The maximum adsorption capacity of 19.76 mg g^-1 and 49.63 mg g^-1 was calculated for Langmuir and Khan isotherm models, respectively. The removal by fixed-bed column as a function of flow rate, initial cefixime concentration, and bed height was also performed. The maximum adsorption capacity of column with the bed height of 15 cm was found to be 31 mg g^-1 at the flow rate of 10 mL min^-1 for the initial concentration of 20 mg L^-1. The compliance of Thomas model with the column sorption was observed. The characterization using SEM, BET, and XRD was carried out for the virgin and regenerated AMPDSAs. The regeneration experiments confirmed the ability of AMPDSA for its cefixime removal efficiency of 80% up to eight cycles.

Polymeric Biomass Derived Adsorbents for Co(II) Remediation, Recycling and Analysis

The gradual replacement of conventional materials with materials tailored to the green development goals is one of the needs of the day. Correspondingly, this article reviews and integrates, for the first time, the gathered knowledge on the use of the adsorbents based on polymeric biomasses (biosorbents) for a cleaner separation of cobalt (Co) from synthetic and actual solutions. It is a two-part comprehensive approach that debates the Co biosorption potential of bio-based polymers from the perspective of their virtual and real applications for decontamination, recovery, and analytical purposes. First, the removal performances of these materials to batch and fixed column biosorption of Co(II) from mono-component and multi-metallic laboratory solutions are systematized and discussed. Following that, the focus of the first part is shifted to the analytical capabilities of the biosorbents proposed for Co(II) quantification from synthetic solutions. The second section considers the polymeric biomasses successfully incorporated in practical strategies for the removal and recovery of Co(II) from real solutions. The opportunities provided by the use of biosorbents for the development of accurate and greener procedures in Co(II) analysis are also highlighted. The directions in which the research on this topic should be continued and strengthened are suggested.

Conversion of lignocellulosic waste into effective flocculants: synthesis, characterization, and performance

Development of cationic flocculants from lignocellulosic wastes not only eliminates the health and environmental concerns associated with the use of conventional chemicals, but also is the way of waste valorization. In the present study, cellulose fibers extracted from rice husk were cationized through an optimization method based on response surface methodology. The fibers cationized at the optimal conditions had a zeta-potential of 15.2 ± 1.0 mV, while the highest potential was + 8.76 mV, for the samples developed before optimization. FTIR analysis proved the presence of the corresponding functional groups. The functionalized fibers were biodegradable and had absolutely positive surface charges at a broad pH range. The cationized fibers were employed as a flocculant to remove turbidity from the synthetic wastewaters at various pHs and initial turbidities. The cationic fibers showed the excellent turbidity removals up to 98.5% from the synthetic wastewater without the need for conventional coagulants. In contrast to traditionally cationized fibers, the synthesized flocculants did not affect the effluent color during coagulation-flocculation. The charge neutralization and bridging through adsorption were the governing mechanisms of flocculation. The procedure can be applied on lignocellulosic wastes to develop cationic fibers with the excellent flocculation ability and suitable operational characteristics.

The improved methods of heavy metals removal by biosorbents: A review

For decades, a vast array of innovative biosorbents have been found out and used in the removal of heavy metals, including bacteria, algae and fungi, etc. Although extensive biological species have been tried as a biosorbent for heavy metals removal, for removal efficiency or economy efficiency limited, it has failed to make a substantial breakthrough in practical application. Thus, many improved methods based on biosorbents emerged. In this review, based on the literature and our research results, we highlight three types of novel methods for biosorbents removal of heavy metals: chemical modification of biosorbents; biomass and chemical materials combination; multiple biomass complex systems. We mainly focus on their configuration, biosorption performance, their creation method, regeneration/reuse, their application and development in the future. Through the comparative analysis of various methods, we think that intracellular autogenous nanomaterials may open up another window in biosorption of heavy metals area. At the same time, the combination of various treatment methods will be the development tendency of heavy metal pollution treatment in the future.

Natural polymer matrix as safe flocculant to remove turbidity from kaolin suspension: Performance and governing mechanism

Conventional flocculants bear environmental and health concerns which could be avoided by applying natural materials, particularly polysaccharide and glycoprotein-containing ones. In the present study, yeast cell wall (YCW), a natural polymer matrix, was used as natural flocculant. To prepare YCW, Saccharomyces cerevisiae was cultivated in bench scale fermenter. After characterization, YCW was employed as anionic flocculant in jar tests to remove turbidity from kaolin suspensions at different conditions where either alum or poly aluminum chloride (PAC) was coagulant. Generally, the lower coagulant consumption, higher turbidity removal or faster sedimentation was observed by using YCW as flocculant. The developed flocculant was more effective in the presence of PAC compared to alum. At best, by applying 300 mg/L YCW, the highest turbidity removals of 98 and 97% were achieved using 10 ppm PAC at pH 6.5 and 50 ppm alum at pH 7.5, respectively. The presence of the flocculant in the structure of the flocs was proved by FTIR analysis. The final pH of the treated suspensions was suitable for discharge purpose without the need for neutralization. The excess positive charge neutralization and bridging were the governing mechanism in coagulation-flocculation process. YCW with proper performance, GRAS designation and readily availability can be considered as natural alternative to chemical anionic flocculants where the process needs safe compounds.

Potential use of algae for heavy metal bioremediation, a critical review

Algae have several industrial applications that can lower the cost of biofuel co-production. Among these co-production applications, environmental and wastewater bioremediation are increasingly important. Heavy metal pollution and its implications for public health and the environment have led to increased interest in developing environmental biotechnology approaches. We review the potential for algal biosorption and/or neutralization of the toxic effects of heavy metal ions, primarily focusing on their cellular structure, pretreatment, modification, as well as potential application of genetic engineering in biosorption performance. We evaluate pretreatment, immobilization, and factors affecting biosorption capacity, such as initial metal ion concentration, biomass concentration, initial pH, time, temperature, and interference of multi metal ions and introduce molecular tools to develop engineered algal strains with higher biosorption capacity and selectivity. We conclude that consideration of these parameters can lead to the development of low-cost micro and macroalgae cultivation with high bioremediation potential.

Iron oxide impregnated Morus alba L. fruit peel for biosorption of Co(II): biosorption properties and mechanism

Biosorption is an ecofriendly wastewater treatment technique with high efficiency and low operating cost involving simple process for the removal of heavy metal ions from aqueous solution. In the present investigation, Morus alba L. fruit peel powder (MAFP) and iron oxide impregnated Morus alba L. fruit peel powder (IO-MAFP) were prepared and used for treating Co(II) contaminated aqueous solutions. Further the materials were characterized by using FTIR and SEM-EDX analysis. From FT-IR analysis it was found that hydroxyl, methoxy, and carbonyl groups are responsible for Co(II) biosorption. The kinetic data obtained for both biosorbents was well fitted with pseudo-second-order kinetic model. The equilibrium data was in tune with the Langmuir and Freundlich isotherm models. The thermodynamic studies were also carried and it was observed that sorption process was endothermic at 298–328 K. These studies demonstrated that both biosorbents were promising, efficient, economic, and biodegradable sorbents.

Hybrid Sargassum-sand sorbent: a novel adsorbent in packed column to treat metal-bearing wastewaters from inductively coupled plasma-optical emission spectrometry

Laboratory batch and column experiments were carried out to examine the efficiency of algal-based treatment technique to clean-up wastewaters emanating from inductively coupled plasma-optical emission spectrometry (ICP-OES). Chemical characterization revealed the extreme complexity of the wastewater, with the presence of 14 different metals under very low pH (pH = 1.1), high conductivity (6.98 mS/cm), total dissolved solid (4.46 g/L) and salinity (3.77). Batch experiments using Sargassum biomass indicated that it was possible to attain high removal efficiencies at optimum pH of 4.0. Efforts were also made to continuously treat ICP-OES wastewater using up-flow packed column. However, swelling of Sargassum biomass leads to stoppage of column. To address the problem, Sargassum was mixed with sand at a ratio of 40: 60 on volume basis. Remarkably, the hybrid Sargassum-sand sorbent showed very high removal efficiency towards multiple metal ions with the column able to operate for 11 h at a flow rate of 10 mL/min. Metal ions such as Cu, Cd, and Pb were only under trace levels in the treated water until 11 h. The results of the treatment process were compared with trade effluent discharge standards. Further the process evaluation and cost analysis were presented.

Continuous metal removal from solution and industrial effluents using Spirogyra biomass-packed column reactor

The granules of Spirogyra neglecta biomass, diameter 0.2-0.5mm, were successfully prepared by boiling it in urea-formaldehyde mixture. Metal sorption performance of the column packed with Spirogyra granules was assessed under variable operating conditions, such as, different influent metal concentrations, bed heights and flow rates. These conditions greatly influenced the breakthrough time and volume, saturation time and volume, and the ability of the column to attain saturation after reaching the breakthrough. The experimental breakthrough curves obtained under varying experimental conditions were modeled using Bohart-Adams, Wolborska, Thomas, Yoon-Nelson and modified dose-response models. The first two models were valid only in representing the initial part of the breakthrough curves; however, the other three models were good in representing the entire breakthrough curve. The granule-packed column could be successfully used up to 6 and 9 cycles of sorption and desorption for the removal of Cu(II) and Pb(II), respectively. The column could efficiently remove different metals from real industrial effluents, and hence the test biomass (Spirogyra granules) is a good candidate for commercial application.

Removal of metal ions by Phormidium bigranulatum (cyanobacteria)-dominated mat in batch and continuous flow systems

Live Phormidium bigranulatum-dominated mat successfully removed Pb(II), Cu(II) and Cd(II) from aqueous solution. Percent metal removal approached equilibrium within 4h, independent of mat thickness (0.2-1.6 mm), in batch system. But % metal removal increased with increase in mat thickness due to enhancement of biomass, which provided more metal binding sites. Metal accumulation decreased with increase in mat thickness due to lessened metal availability vis-à-vis biomass. Metal removal (%) increased with increasing mat area, but decreased with increasing metal concentration in the solution. In continuous flow system, metal accumulation increased with increasing volume of single or multi-metal solution passed over the mat. The mat removed all the tested metals from the multi-metal solution with almost the same efficiency. The maximum removal of the test metals occurred at the lowest tested flow rate. Raceway type ponds can be employed for large-scale use of Phormidium mat in bioremediation of metalliferous wastewaters.