Genome Shuffling and Ribosome Engineering of Streptomyces actuosus for High-Yield Nosiheptide Production

Flow-cytometric cell sorting coupled with UV mutagenesis for improving pectin lyase expression

Introduction: Alkaline pectin lyase is an important enzyme with a wide range of applications in industrial production, It has been widely used in many important fields such as fruit juice processing and extraction, the dyeing and processing of cotton and linen textiles, degumming plant fibers, environmental industrial wastewater treatment, and pulp and paper production. PGLA-rep4 was previously generated as a modified alkaline pectin lyase with high specific activity at pH 11.0°C and 70°C. However, the pre-constructed high-activity pectin lyase expression strains are still difficult to apply in industrial production due to their limited enzymatic activity. We hope to solve these problems by combining modern breeding techniques with high-throughput equipment to rapidly screen alkaline pectin lyase with higher enzymatic activity and lower cost. Methods: We fused the genes encoding PGLA-rep4 and fluorescent protein egfp using a flexible linker peptide and ligated them into a temperature-sensitive plasmid, pKD46. The constructed screening plasmid pKD46-PGLA-rep4-egfp was then transformed into an expression host and screened via flow-cytometric cell sorting coupled with UV mutagenesis. Results: Following mutagenesis, primary screening, and secondary screening, the high-expression strain, named Escherichia coli BL21/1G3, was obtained. The screening plasmid pKD46-PGLA-rep4-egfp was eliminated, and the original expression plasmid pET28a-PGLA-rep4 was then retransformed into the mutant strains. After induction and fermentation, pectin lyase activity in E. coli BL21/1G3 was significantly increased (1.37-fold relative to that in the parental E. coli BL21/PGLA-rep4 strain, p < 0.001), and the highest activity was 230, 240 U/mL at 144 h. Genome sequencing revealed that genes encoding ribonuclease E (RNase E) and diadenosine tetraphosphatase (ApaH) of E. coli BL21/1G3 were mutated compared to the sequence in the original E. coli BL21 (DE3) strain, which could be associated with increased enzyme expression. Discussion: Our work provides an effective method for the construction of strains expressing pectin lyase at high levels.

A Method for Improving Microbial Conversion of Diosgenin and Separation and Identification of the Product

Diosgenin, a hydrolysis product from Dioscorea plants, can be used as a precursor of steroid drugs (e.g., progesterone, testosterone, and glucocorticoid). However, traditional acid hydrolysis production wastes water and causes severe environmental pollution. The extraction of diosgenin through microbial transformation is the most green and environmentally friendly method at present. In order to improve the efficiency of the extraction of diosgenin through microbial transformation, we proposed a new method of strain mutagenesis. After mutagenesis, the response surface methodology was used to optimize the solid-state fermentation medium, thereby improving the diosgenin yield. We found that the optimal formulation was 5.5% sucrose, 0.6% NH4H2PO4, and 26.6% wheat bran. The final extraction rate of diosgenin reached 0.439% (the value of diosgenin per g. of starting plant dry material). Compared with 0.338% before optimization, it had increased 1.29 times. Furthermore, two other compounds were isolated from the fermentation products. These were identified as diosgenone (C27H41O3) and yuccagenone (C27H42O3). Traditional diosgenone is obtained through the oxidation of diosgenin with oxalic acid, but the method in this study is directly obtained from Dioscorea rhizome powder. The price of Dioscorea rhizome powder is much lower than diosgenin, thus greatly reducing the cost of obtaining diosgenone. This method provides a basis for subsequent research on other pharmacological compounds.

Microbial production of small peptide: pathway engineering and synthetic biology

Small peptides are a group of natural products with low molecular weights and complex structures. The diverse structures of small peptides endow them with broad bioactivities and suggest their potential therapeutic use in the medical field. The remaining challenge is methods to address the main limitations, namely (i) the low amount of available small peptides from natural sources, and (ii) complex processes required for traditional chemical synthesis. Therefore, harnessing microbial cells as workhorse appears to be a promising approach to synthesize these bioactive peptides. As an emerging engineering technology, synthetic biology aims to create standard, well-characterized and controllable synthetic systems for the biosynthesis of natural products. In this review, we describe the recent developments in the microbial production of small peptides. More importantly, synthetic biology approaches are considered for the production of small peptides, with an emphasis on chassis cells, the evolution of biosynthetic pathways, strain improvements and fermentation.

Introduction to Thiopeptides: Biological Activity, Biosynthesis, and Strategies for Functional Reprogramming

Thiopeptides (also known as thiazolyl peptides) are structurally complex natural products with rich biological activities. Known for over 70 years for potent killing of Gram-positive bacteria, thiopeptides are experiencing a resurgence of interest in the last decade, primarily brought about by the genomic revolution of the 21st century. Every area of thiopeptide research-from elucidating their biological function and biosynthesis to expanding their structural diversity through genome mining-has made great strides in recent years. These advances lay the foundation for and inspire novel strategies for thiopeptide engineering. Accordingly, a number of diverse approaches are being actively pursued in the hope of developing the next generation of natural-product-inspired therapeutics. Here, we review the contemporary understanding of thiopeptide biological activities, biosynthetic pathways, and approaches to structural and functional reprogramming, with a special focus on the latter.

Genome shuffling based on different types of ribosome engineering mutants for enhanced production of 10-membered enediyne tiancimycin-A

Tiancimycin-A (TNM-A) is an anthraquinone-fused ten-membered enediyne produced by Streptomyces sp. CB03234, which is very promising for the development of anticancer antibody-drug conjugates (ADCs). To improve the titer of TNM-A, we have generated high-producing mutants CB03234-S and CB03234-R through ribosome engineering, but still not sufficient for pilot production of TNM-A. As the follow-up work, gentamycin-induced ribosome engineering was further adopted here to generate the mutant CB03234-G, which produced similar level of TNM-A as in CB03234-S and CB03234-R. Benefiting from the distinct antibiotic resistances of three ribosome engineering mutants, genome shuffling between any two of them was respectively carried out, and finally obtained the recombinant CB03234-GS26. Under optimal conditions, CB03234-GS26 produced 40.6 ± 1.0 mg/L TNM-A in shaking flasks and 20.8 ± 0.4 mg/L in a scaled-up 30-L fermentor. Comparing with the parental high-producing mutants, the over 1.6-fold titer improvement of CB03234-GS26 in fermentor was more promising for pilot production of TNM-A. Besides the distinctive morphological features, genetic characterization revealed that CB03234-GS26 possessed 1.8 kb rsmG related deletion just the same as CB03234-S, but no mutation was found in rpsL. Subsequent knockouts proved that rsmG was unrelated to titer improvement of TNM-A, which implied other genomic variations and mechanisms rather than ribosome engineering to enhance the biosynthesis of TNM-A. Therefore, CB03234-GS26 provided a basis to locate potential novel genetic targets, and explore the interactions between complex metabolic network and TNM biosynthetic pathway, which shall promote future construction of high-yielding systems for TNM-A and other anthraquinone-fused enediynes.Key Points •United genome shuffling and ribosome engineering help further strain improvement. •CB03234-GS26 with improved titer is practical for the pilot production of TNM-A. •Enhanced TNM-A production should attribute to novel genetic features/mechanisms.

The Application of Ribosome Engineering to Natural Product Discovery and Yield Improvement in Streptomyces

Microbial natural product drug discovery and development has entered a new era, driven by microbial genomics and synthetic biology. Genome sequencing has revealed the vast potential to produce valuable secondary metabolites in bacteria and fungi. However, many of the biosynthetic gene clusters are silent under standard fermentation conditions. By rational screening for mutations in bacterial ribosomal proteins or RNA polymerases, ribosome engineering is a versatile approach to obtain mutants with improved titers for microbial product formation or new natural products through activating silent biosynthetic gene clusters. In this review, we discuss the mechanism of ribosome engineering and its application to natural product discovery and yield improvement in Streptomyces. Our analysis suggests that ribosome engineering is a rapid and cost-effective approach and could be adapted to speed up the discovery and development of natural product drug leads in the post-genomic era.

The genome and transcriptome of Lactococcus lactis ssp. lactis F44 and G423: Insights into adaptation to the acidic environment

Nisin, as a common green (environmentally friendly), nontoxic antibacterial peptide secreted by Lactococcus lactis, is widely used to prevent the decomposition of meat and dairy products and maintains relatively high stability at low pH. However, the growth of Lc. lactis is frequently inhibited by high lactic acid concentrations produced during fermentation. This phenomenon has become a great challenge in enhancing the nisin yield for this strain. Here, the shuffled strain G423 that could survive on a solid plate at pH 3.7 was generated through protoplast fusion-mediated genome shuffling. The nisin titer of G423 peaked at 4,543 IU/mL, which was 59.9% higher than that of the same batch of the initial strain Lc. lactis F44. The whole genome comparisons between G423 and F44 indicated that 6 large fragments (86,725 bp) were inserted in G423 compared with that of Lc. lactis F44. Transcriptome data revealed that 4 novel noncoding transcripts, and the significantly upregulated genes were involved in multiple processes in G423. In particular, the expression of genes involved in cell wall and membrane biosynthesis was obviously perturbed under acidic stress. Quantitative real-time PCR analysis showed that the transcription of noncoding small RNA NC-1 increased by 2.35-fold at pH 3.0 compared with that of the control (pH 7.0). Overexpression assays indicated that small RNA NC-1 could significantly enhance the acid tolerance and nisin production of G423 and F44. Our work provided new insights into the sophisticated genetic mechanisms involved in Lc. lactis in an acidic environment, which might elucidate its potential application in food and dairy industries.

Discrimination of Nosiheptide Sources with Plasmonic Filters

Bacteria identification plays a vital role in the field of clinical diagnosis, food industry, and environmental monitoring, which is in great demand of point of care detection methods. In this paper, in order to discriminate the source of nosiheptide product, a plasmonic filter was fabricated to filtrate, capture and identify Streptomycete spores with Surface enhanced Raman Scattering (SERS). Since the plasmonic filter was derived from self-assembled photonic crystal coated with silver, the plasmonic "hot spots" on the filter surface was distributed evenly in a fare good density and the SERS enhancement factor was 7.49 × 10⁷. With this filter, a stain- and PCR-free detection was realized with only 5 μL sample solution and 5 min in a manner of "filtration and measure". Comparison to traditional Gram stain method and silver-plated nylon filter membrane, the plasmonic filter showed good sensitivity and efficiency in the discrimination of nosiheptide prepared with chemical and biological methods. It is anticipated that this simple SERS detection method with plasmonic filter has promising potentials in food safety, environmental, or clinical applications.

YcaO-Dependent Posttranslational Amide Activation: Biosynthesis, Structure, and Function

With advances in sequencing technology, uncharacterized proteins and domains of unknown function (DUFs) are rapidly accumulating in sequence databases and offer an opportunity to discover new protein chemistry and reaction mechanisms. The focus of this review, the formerly enigmatic YcaO superfamily (DUF181), has been found to catalyze a unique phosphorylation of a ribosomal peptide backbone amide upon attack by different nucleophiles. Established nucleophiles are the side chains of Cys, Ser, and Thr which gives rise to azoline/azole biosynthesis in ribosomally synthesized and posttranslationally modified peptide (RiPP) natural products. However, much remains unknown about the potential for YcaO proteins to collaborate with other nucleophiles. Recent work suggests potential in forming thioamides, macroamidines, and possibly additional post-translational modifications. This review covers all knowledge through mid-2016 regarding the biosynthetic gene clusters (BGCs), natural products, functions, mechanisms, and applications of YcaO proteins and outlines likely future research directions for this protein superfamily.