Sensitive and Reliable Ascorbic Acid Sensing by Lanthanum Oxide/Reduced Graphene Oxide Nanocomposite

A redox reaction-induced ratiometric fluorescence platform for the specific detection of ascorbic acid based on Ag2S quantum dots and multifunctional CoOOH nanoflakes

In this work, a ratiometric fluorescent nanoplatform for the detection of ascorbic acid (AA) was constructed based on the Ag₂S quantum dots (QDs) and multifunctional hydroxyl cobalt oxide nanoflakes (CoOOH NFs). Ag₂S QDs can be assembled on the surface of CoOOH NFs by electrostatic adsorption, resulting in the quenching of the NIR fluorescence emission of Ag₂S QDs at 680 nm effectively through the inner filter effect (IFE). o-Phenylenediamine (OPD), a common substrate of oxidase-like (OXD) mimic, is rapidly oxidized into the fluorescent product of 2,3-diaminophenazine (DAP) with the appearance of an emission peak at 575 nm under the catalysis of CoOOH NFs. After AA was added, the fluorescence emission of DAP declined because of the decline in the OXD-like activity of CoOOH NFs due to the transformation of Co²⁺. Simultaneously, Ag₂S QDs were released, accompanied by the recovery of red fluorescence. These two fluorescent signals can be excited at the same excitation wavelength, simplifying the detection procedure. Using F₅₇₅/F₆₈₀ as the readout, the quantification of AA can be realized with the linear range and detection limit of 0.2 μM-20 mM and 0.014 μM, respectively. The ratiometric fluorescence sensor can be effectively used to determine the content of AA in real samples such as juice and serum. This work integrates the in-situ formation of the fluorescent species via the catalysis of the nanozyme and the redox reaction to destroy the CoOOH NFs nanozyme as well as the two dimensional nanoflake induced turn-off-on strategy for Ag₂S QDs, which provides a specific strategy for the selective detection of AA and may offer a reliable approach for the construction of other biosensing platforms.

Protein immobilization on graphene oxide or reduced graphene oxide surface and their applications: Influence over activity, structural and thermal stability of protein

Due to the essential role of biological macromolecules in our daily life; it is important to control the stability and activity of such macromolecules. Therefore, the most promising route for enhancement in stability and activity is immobilizing proteins on different support materials. Furthermore, large surface area and surface functional groups are the important features that are required for a better support system. These features of graphene oxide (GO) and reduced graphene oxide (RGO) makes them ideal support materials for protein immobilization. Studies show the successful formation of GO/RGO-protein complexes with enhancement in structural/thermal stability due to various interactions at the nano-bio interface and their utilization in various functional applications. The present review focuses on protein immobilization using GO/RGO as solid support materials. Moreover, we also emphasized on basic underlying mechanism and interactions (hydrophilic, hydrophobic, electrostatic, local protein-protein, hydrogen bonding and van der Walls) between protein and GO/RGO which influences structural stability and activity of enzymes/proteins. Furthermore, GO/RGO-protein complexes are utilized in various applications such as biosensors, bioimaging and theranostic agent, targeted drug delivery agents, and nanovectors for drug and protein delivery.

The fabrication of an Ni6MnO8 nanoflake-modified acupuncture needle electrode for highly sensitive ascorbic acid detection

The current work describes the use of a steel acupuncture needle as an electrode substrate in order to construct an Ni6MnO8 nanoflake layer-modified microneedle sensor for highly sensitive ascorbic acid detection. For the purpose of constructing the functionalized acupuncture needle, first, a carbon film was layered on the needle surface as the seed layer. Subsequently, a straightforward hydrothermal reaction-calcination process was employed for the growth of Ni6MnO8 nanoflakes on the needle to function as a sensing interface. Electrochemical investigations illustrated the fact that the Ni6MnO8 nanoflake-altered acupuncture needle electrode manifested outstanding efficiency toward the amperometric identification of ascorbic acid. In addition, the electrode manifested elevated sensitivity of 3106 μA mM-1 cm-2, detection limit of 0.1 μM, and a broad linear range between 1.0 μM and 2.0 mM. As demonstrated by the results, the Ni6MnO8 nanoflake-modified acupuncture needle constitutes a potentially fresh platform to construct non-enzymatic ascorbic acid sensors.

Fur-Imine-Functionalized Graphene Oxide-Immobilized Copper Oxide Nanoparticle Catalyst for the Synthesis of Xanthene Derivatives

Fur-imine-functionalized graphene oxide-immobilized copper oxide nanoparticles (Cu(II)-Fur-APTES/GO) are synthesized and found to be a cost-effective, efficient, and reusable heterogeneous nanocatalyst for the preparation of pharmaceutically important xanthene derivatives under greener solvent conditions. Cu(II)-Fur-APTES/GO exhibits excellent result in the synthesis of xanthenes with reduced reaction time (25-50 min) and higher yields (up to 95%) and has a simple procedure, ease of product separation, and no byproducts. Moreover, the nanocatalyst has a Cu loading of 13.5 at. % over functionalized GO which is far superior than the already known metal-based heterogeneous catalysts. The newly synthesized catalyst has been characterized by various physiochemical techniques such as X-ray photoelectron spectroscopy, X-ray diffraction, energy-dispersive X-ray, Raman spectroscopy for structural characterization, field emission scanning electron microscopy and high-resolution transmission electron microscopy for morphological characterization. The catalyst showed admirable recyclability up to five consecutive runs, and there was no appreciable loss in catalytic efficiency.

Three-dimensionally ordered macro/mesoporous TiO2 matrix to immobilize sulfur for high performance lithium/sulfur batteries

A three-dimensionally (3D) ordered macro-/mesoporous TiO₂ (3DOM-mTiO₂) was synthesized via a simple solvothermal process. 3DOM-mTiO₂ was used as a sulfur carrier for cathode materials in a lithium-sulfur (Li-S) battery. The orderly interconnected macro and mesopores structure within the macropore walls yield a large pore volume and high specific surface area in 3DOM-mTiO₂, which improved the sulfur loading capacity of the material. The S/TiO₂ composite was synthesized as a cathode material for lithium/sulfur battery, which initially produced a high capacity of 1089 mAh g^-1 and retained a value of 703 mAh g^-1 after 200 cycles. An initial current rate of 0.2 C was used, which was further increased up to 2.5 C when a reversible capacity of 651 mAh g^-1 was obtained. The excellent electrochemical performance can be attributed to the 3D ordered macro-/mesoporous structure of TiO₂, which physically confines the soluble lithium polysulfides and diminishes the sulfur volume expansion upon cycling. In addition, the strong electrostatic attraction between the Ti-O bond and polysulfide stimulates the performance via stronger adsorption of the electrochemical reaction products.

Reduced graphene oxide nanoribbon immobilized gold nanoparticle based electrochemical DNA biosensor for the detection of Mycobacterium tuberculosis

Tuberculosis is one of the most dreadful diseases caused by Mycobacterium tuberculosis with more than 9 million individuals suffering from it in 2014. Traditional methods of detection are not efficient enough for its quick and reliable detection; therefore, it is imperative to develop methods of its detection in the early stages. Consequently, we report a highly sensitive and selective biosensor for detection of Mycobacterium tuberculosis. In this work, gold nanoparticles (AuNPs, dia. ∼6 nm, 1.81 wt% loading) are immobilized over reduced graphene oxide nanoribbons (RGONRs). An ssDNA/Au/RGONR electrode is prepared by immobilizing Au nanoparticles followed by covalent modification of Au nanoparticles with 5'SH-ssDNA. As per the best knowledge of the authors, the target DNA of Mycobacterium tuberculosis is detected using a ssDNA/Au/RGONR bioelectrode by cyclic voltammetry and chronoamperometric methods for the first time. With high detection efficiency (0.1 fM), the ssDNA/Au/RGONR bioelectrode exhibited better signal amplification and electrochemical response as compared to bare Au and RGONR electrodes. Additionally, the ssDNA/Au/RGONR bioelectrode displayed good linear response to different concentrations of target M. tuberculosis DNA. The ssDNA/Au/RGONR has shown excellent specificity (92%) to Mycobacterium tuberculosis target DNA as compared with non-complementary DNA. The Au/RGONR matrix has the potential to be used as an immobilization platform for single-stranded probe DNAs of different diseases other than tuberculosis reported here.

Biocompatibility studies on lanthanum oxide nanoparticles

Biocompatibility on lanthanum oxide nanoparticles (LONP) were investigated. LONP was cytotoxic to balb/3T3 cells via release of ROS. LONP and/or extracts were non-irritant, non-sensitizer and non-mutagenic. LONP extracts did not show acute systemic toxicity. Whereas, LONP exerted hepatotoxicity following oral administration.