Soluble and Cross-Linked Aggregated Forms of α-Galactosidase from Vigna mungo Immobilized on Magnetic Nanocomposites: Improved Stability and Reusability

An Overview of Crosslinked Enzyme Aggregates: Concept of Development and Trends of Applications

Enzymes are commonly used as biocatalysts for various biological and chemical processes in industrial applications. However, their limited operational stability, catalytic efficiency, poor reusability, and high-cost hamper further industrial usage. Thus, crosslinked enzyme aggregates (CLEAs) are developed as a better enzyme immobilization tool to extend the enzymes' operational stability. This immobilization method is appealing because it is simpler due to the absence of ballast and permits the collective use of crude enzyme cocktails. CLEAs, so far, have been successfully developed using a variety of enzymes, viz., hydrolases, proteases, amidases, lipases, esterases, and oxidoreductase. Recent years have seen the emergence of novel strategies for preparing better CLEAs, which include the combi- and multi-CLEAs, magnetics CLEAs, and porous CLEAs for various industrial applications, viz., laundry detergents, organic synthesis, food industries, pharmaceutical applications, oils, and biodiesel production. To better understand the different strategies for CLEAs' development, this review explores these strategies and highlights the relevant concerns in designing innovative CLEAs. This article also details the challenges faced during CLEAs preparation and solutions for overcoming them. Finally, the trending strategies to improve the preparation of CLEAs alongside their industrial application trends are also discussed.

Lipase in-situ immobilized in covalent organic framework: Enzymatic properties and application in the preparation of 1, 3-dioleoyl-2-palmitoylglycerol

In this study, the critical importance of designing an appropriate immobilized carrier and method for free lipase to ensure exceptional biological catalytic activity and stability was emphasized. Covalent organic frameworks (COF-1) were synthesized as a novel porous carrier with an azine structure (-CN-NC-) through the condensation of hydrazine hydrate and benzene-1,3,5-tricarbaldehyde at room temperature. Simultaneously, Rhizomucor miehei lipase (RML) was immobilized within the COF-1 carrier using an in-situ aqueous phase method. Characterization of the carrier and RML@COF-1 and evaluation of the lipase properties of RML and RML@COF-1 through p-Nitrophenyl palmitate hydrolysis were conducted. Additionally, application in the synthesis of 1, 3-dioleoyl-2-palmitoylglycerol (OPO) was explored. The results showed that RML@COF-1 exhibited a high enzymatic loading of 285.4 mg/g. Under 60℃ conditions, the activity of RML@COF-1 was 2.31 times higher than that of free RML, and RML@COF-1 retained 77.25% of its original activity after 10 cycles of repeated use, indicating its excellent thermal stability and repeatability. Under the optimal conditions (10%, 1:8 PPP/OA, 45℃, 5 h), the yield of OPO reached 47.35%, showcasing the promising application prospects of the novel immobilized enzyme synthesized via in-situ aqueous phase synthesis for OPO preparation.

Innovative biocatalyst synthesis of pectinolytic enzymes by cross-linking strategy: Potentially immobilised pectinases for the production of pectic-oligosaccharides from pectin

Pectinases are outstanding multienzymes, which have the potential to produce new emerging pectic-oligosaccharides (POS) via enzymatic hydrolysis of pectin. However, free pectinase is unable to undergo repeated reaction for the production of POS. This study proposed a sustainable biocatalyst of pectinases known as cross-linked pectinase aggregates (CLPA). Pectinase from Aspergillus aculeatus was successfully precipitated using 2 mg/mL pectinase and 60 % acetone for 20 min at 20 °C, which remained 36.3 % of its initial activity. The prepared CLPA showed the highest activity recovery (85.0 %), under the optimised conditions (0.3 % (v/v) starch and glutaraldehyde mixture (St/Ga), 1.5: 1 of St/Ga, 25 °C, 1.5 h). Furthermore, pectin-degrading enzymes from various sources were used to produce different CLPA. The alteration of pectinase secondary structure gave high stability in acidic condition (pH 4), thermostability, deactivation energy and half-life, and improved storage stability at 4 °C for 30 days. Similarly to their free counterpart, the CLPA exhibited comparable enzymatic reaction kinetics and could be reused eight times with approximately 20 % of its initial activity. The developed CLPA does not only efficaciously produced POS from pectin as their free form, but also exhibited better operational stability and reusability, making it more suitable for POS production.

Magnetic cross-linked enzyme aggregate based on ionic liquid modification as a novel immobilized biocatalyst for phytosterol esterification

Novel immobilized enzyme CRL-FIL-CLEAs@Fe3O4 with enhanced activities and stabilities was successfully prepared by a cross-linked lipase aggregate method for phytosterol esterification.

New Construction of Functionalized CuO/Al2O3 Nanocomposite-Based Polymeric Sensor for Potentiometric Estimation of Naltrexone Hydrochloride in Commercial Formulations

Electrically conductive polymeric nanocomposites with nanoparticles are adaptable types of nanomaterials that are prospective for various applications. The extraordinary features of copper oxide (CuO) and aluminium oxide (Al₂O₃) nanostructures, encourages extensive studies to prospect these metal oxide nanocomposites as potential electroactive materials in sensing and biosensing applications. This study suggested a new CuO/Al₂O₃ nanocomposite-based polymeric coated wire membrane sensor for estimating naltrexone hydrochloride (NTX) in commercial formulations. Naltrexone hydrochloride and sodium tetraphenylborate (Na-TPB) were incorporated in the presence of polymeric polyvinyl chloride (PVC) and solvent mediator o-nitrophenyloctyl ether (o-NPOE) to form naltrexone tetraphenylborate (NTX-TPB) as an electroactive material. The modified sensor using NTX-TPB-CuO/Al₂O₃ nanocomposite displayed high selectivity and sensitivity for the discrimination and quantification of NTX with a linearity range 1.0 × 10^-9-1.0 × 10^-2 mol L^-1 and a regression equation E_mV = (58.25 ± 0.3) log [NTX] + 754.25. Contrarily, the unmodified coated wire sensor of NTX-TPB exhibited a Nernstian response at 1.0 × 10^-5-1.0 × 10^-2 mol L^-1 and a regression equation E_mV = (52.1 ± 0.2) log [NTX] + 406.6. The suggested modified potentiometric system was validated with respect to various criteria using the methodology recommended guidelines.

Enhancing stability and by-product tolerance of β-glucuronidase based on magnetic cross-linked enzyme aggregates

β-glucuronidase is an important catalyst which is highly specific for β-glucuronides. Here, we constructed magnetic cross-linking β-glucuronidase aggregates (MCLEAs) to for the production of glycyrrhetinic acid (GA). Before crosslinking via glutaraldehyde, we used carbodiimide to enhance the interaction between enzymes and carboxyl-functionalized Fe₃O₄, efficiently improving the activity recovery. Compared to free enzymes, both k_cat and k_cat/K_m enhanced, indicating that crosslinking and aggregation brought higher catalytic efficiency to enzymes. MCLEAs enhanced pH and thermal stabilities and retained 63.3% of catalytic activity after 6 cycles. More importantly, it was first found that the glucuronic acid tolerance of β-glucuronidase after the formation of MCLEAs enhanced 221.5% in 10 mM of glucuronic acid. According to the Raman spectroscopy, the ordered structure of β-glucuronidase increased from 43.9% to 50.6% after immobilization, which explained the increased stability and tolerance. To sum up, MCLEAs provided an efficient strategy for immobilization of enzymes, which enhanced stability and glucuronic acid tolerance of enzymes. It might be an effective solution to the serious inhibition caused by by-products during the preparation of aglycone from natural glycosides, having a significant applied prospect in industry.