Recent Advances in Sensor-Based Detection of Toxic Dyes for Bioremediation Application: a Review

Advances on chalcogenide quantum dots-based sensors for environmental pollutants monitoring

Water contamination represents a significant ecological impact with global consequences, contributing to water scarcity worldwide. The presence of several pollutants, including heavy metals, pharmaceuticals, pesticides, and pathogens, in water resources underscores a pressing global concern, prompting the European Union (EU) to establish a Water Watch List to monitor the level of these substances. Nowadays, the standard methods used to detect and quantify these contaminants are mainly liquid or gas chromatography coupled with mass spectrometry (LC/GC-MS). While these methodologies offer precision and accuracy, they require expensive equipment and experienced technicians, and cannot be used on the field. In this context, chalcogenide quantum dots (QDs)-based sensors have emerged as promising, user-friendly, practical, and portable tools for environmental monitoring. QDs are semiconductor nanocrystals that possess excellent properties, and have demonstrated versatility across various sensor types, such as fluorescent, electrochemical, plasmonic, and colorimetric ones. This review summarizes recent advances (2019-2023) in the use of chalcogenide QDs for environmental sensing, highlighting the development of sensors capable of detect efficiently heavy metals, anions, pharmaceuticals, pesticides, endocrine disrupting compounds, organic dyes, toxic gases, nitroaromatics, and pathogens.

Removal of Cr6+ ions and mordant violet 40 dye from liquid media using Pterocladia capillacea red algae derived activated carbon-iron oxides

In recent years, water pollution has become one of the most dangerous problems facing the world. Pollution of water with heavy metals and different dyes has caused many harmful effects on human health, living organisms and our environment. In this study, iron oxide nanomagnetic composite from Pterocladia Capillacea red algae-derived activated carbon (PCAC-IO) was synthesized by co-precipitation method using different iron salts and different base solutions. The synthesized nanocomposite was investigated with various characterization techniques such as FTIR, BET, SEM-EDX, TEM, XRD, and VSM. The obtained PCAC-IO adsorbent was used for Cr6+ ions and Mordant Violet 40 (MV40) dye removal. The adsorption mechanism of Cr6+ ions and MV40 dye on PCAC-IO was examined using several adsorption and kinetic isotherm models. Langmuir and Freundlich models were investigated using experimental data. Pseudo-first-order (PFO), Pseudo-second-order (PSO) and intraparticle diffusion models (IPDM) were applied to identify the adsorption mechanism. It has shown that the PSO kinetic model fits better with the experimental data obtained from PCAC-IO. This result can be interpreted as the adsorption of the adsorbate on the nanocomposite as chemical adsorption. The optimum conditions for maximum Cr6+ ions removal (96.88%) with PCAC-IO adsorbent occur at room temperature, 5 g L-1 adsorbent concentration, 100 mg L-1 initial pollutant concentration, pH 1 and at the end of 180 min, while maximum MV40 dye removal (99.76%), other conditions being the same, unlikely it occurred at pH 2.06 and after 45 min. The most suitable model for Cr6+ ions removal under the conditions of 1 L-1 g adsorbent concentration and 400 mg L-1 adsorbate concentration was Langmuir (Qmax = 151.52 mg g-1), while for MV40 removal it was Freundlich (Qmax = 303.03 mg g-1). We propose the use of activated carbon-supported iron oxide prepared from bio-waste material, especially from Pterocladia Capillacea red algae, as a promising adsorbent with high efficiency in the removal of Cr6+ ions and MV40 dye from aqueous media.

Fluorescent fiber-optic device sensor based on carbon quantum dot (CQD) thin films for dye detection in water resources

Industrialization, especially in textile industries, has led to increased use of dyes and pigments to impart colours to fabrics. Textile dyes are one of the chief emerging pollutants of water resources as industrial effluents. In the current research, we report the development and utilization of pH-sensitive carbon quantum dots (CQDs) immobilized in polymer thin films acting as sensors for textile dye detection. The CQDs and CQD-containing polymer films were characterized by various techniques like XRD, TEM, XPS, and CLSM. The synthesized CQD thin films possess a unique pH-sensitive property that can be used to detect various model acidic and basic dyes that are important components of industrial effluents from textile dyes. The detection capability of the sensor films was evaluated by spiking dyes in various water matrices, like household tap water and river water. The results indicate that pH-sensitive CQD thin film was able to detect three acidic dyes, namely methyl red, methyl orange, and bromocresol green, and one basic dye, methylene blue, in a linear range of 0-100 μM with a response time of 1 minute. The CQD thin-film sensors have a limit of detection of 26.4 ppb, 214.5 ppb, 46.2 ppb, and 29.7 ppb for methyl red, methyl orange, bromocresol green and methylene blue, respectively. The accuracy of detection performed by spiking studies in water resources indicated an ∼100% recovery value in all tested acidic and basic dyes. The sensor films were compared for analytical parameters using UV-visible-fluorescence spectroscopy and HPLC.

Microbial remediation of plastic pollutants generated from discarded and abandoned marine fishing nets

A wide range of plastic debris dumped into the ocean has recently gained concern of the marine ecosystems. Discarded and abandoned fishing nets, also known as ghost nets, are lost in the marine water and has no commercial significance. Additionally these fishing gear left out in the aquatic environment pose a severe risk to marine environment. Fishing nets, made up of synthetic plastic materials, are a major source of marine pollutants and act as a vector for transporting other toxic chemical pollutants. Approximately 10% of total marine plastic pollutants come from commercial fishing nets, and each year up to 1 million tons of fishing gear are discarded into the marine ecosystem. It can be estimated that by 2050 the amount will be doubled, adding 15-20 million metric tons of discarded lost fishing gears into ocean. The gradual and increased deposition of plastic pollutants in aquatic habitat also affects the whole food chain. Recently, microbial degradation of marine plastics has focussed the eyes of researchers and a lot of investigations on potential microbial degraders are under process. Microorganisms have developed the ability to grow under plastic stress condition and adapt to alter metabolic pathways by which they can directly feed upon marine plastic pollutants as sole carbon source. The present review compiles information on marine plastic pollution from discarded and abandoned fishing nets, their effect on aquatic ecosystems, marine animals and food chain and discusses microbial remediation strategies to control this pollution, especially and their implications in the marine ecosystems.

Detection of Environmental Microfiber Pollutants through Vibrational Spectroscopic Techniques: Recent Advances of Environmental Monitoring and Future Prospects

A robust environmental monitoring system is highly essential for the instant detection of environmental microfiber pollutants for the sustainable management of the environment and human health. The extent of microfiber pollution is growing exponentially across the globe in both terrestrial and marine environments. An immediate and accurate environmental monitoring system is crucial to investigate the composition and distribution of these micropollutants. Fourier Transform Infrared Spectroscopy and Raman Spectroscopy are vibrational spectroscopic techniques that have the novel ability to detect microfibers within a minute concentration from diverse environmental samples. The major micropollutants which have been analyzed are polyethylene, polypropylene, nylon 6, polystyrene, and polyethylene terephthalate. After a detailed and critical study of the various aspects of spectroscopic analysis, the review is concluded with a comprehensive discussion of the significance of these robust methods and their application in future aspects for further preventing microfiber pollution in the marine environment. This study highlights the utilities and significance of vibrational spectroscopic detection techniques for the immediate and accurate identification of synthetic microfibers. This review also evaluated the implementation of spectroscopic methods as a precise tool for the characterization and monitoring of microfiber pollutants in the environment.

A Review on Heavy Metal Ion Adsorption on Synthetic Microfiber Surface in Aquatic Environments

Synthetic microfibers (SMFs), tiny particles which gets fragmented from large fragments of large synthetic fibers having less than 10 µm in diameter, have gathered ubiquitously in each and every corner of the earth. After their release into the aquatic environment, they remain there without natural degradation. Furthermore, it can be anticipated that floating units are transported along the food chain leading to bioaccumulation. It has been estimated that approximately 10-20 Mt of large fabric products as garbage enter into aquatic system per annum. Recently, these synthetic fragments have been investigated as transporters of heavy metal ions (HMs) showing different types of interactions. Yet, the underlying mechanism of these types of interaction is not known, especially the factors stimulating this process and how badly they affect biotic communities. Through this article, a detailed survey was carried out on the sources of microfibers and HMs into the aquatic environment, adsorption of different types of HMs on the SMF surface, mechanics favors these HM-MF interactions, particularly highlighting the significant roles of interaction on microbial biofilm formation. Their collaborative effects which possess harmful effects on aquatic as well as terrestrial organisms was also discussed. Lastly, the future investigations should focus on rigorous research in this field. This article to the best of our knowledge briefly describes the current research developments and emphasizes the vital function of the microorganisms on MFs-HMs interactions with the encouragement for rigorous research in this field to reveal accurate mechanisms and decrease the hazards related with MF presence.